LMS Patriot Class 5551 The Unknown Warrior

Last updated

LMS Patriot Class 5551 The Unknown Warrior
5551 The Unknown Warrior inside Crewe HC shed.jpg
An almost complete looking 5551 inside the shed at Crewe Heritage Centre, on this day it was to have its new crest unveiled.
Type and origin
Power typeSteam
Designer Sir Henry Fowler (original designer)
BuilderOriginal - LMS Crewe Works, Rebuild- The LMS Patriot Project
Build dateOriginal - May 1934, Rebuild - 2008–present
Specifications
Configuration:
​
 •  Whyte 4-6-0
 •  UIC 2′C h2
Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge
Leading dia. 3 ft 3 in (0.991 m)
Driver dia.6 ft 9 in (2.06 m)
Length62 ft 8+3⁄4 in (19.120 m)
Loco weight80.75 long tons (82.05 t; 90.44 short tons)
Tender weight42.70 long tons (43.39 t; 47.82 short tons)
Total weight123.45 long tons (125.43 t; 138.26 short tons)
Fuel type Coal
Fuel capacity5.5 long tons (5.6 t; 6.2 short tons)
Water cap.3,900 imp gal (18,000 L; 4,700 US gal)
Firebox:​
 • Grate area30+1⁄2 sq ft (2.83 m2)
BoilerG9½S
Boiler pressure200 psi (1.4 MPa)
Heating surface:​
 • Firebox183 sq ft (17.0 m2)
 • Tubes and flues1,552 sq ft (144.2 m2)
Superheater:
​
 • Heating area365 sq ft (33.9 m2)
Cylinders 3
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Valve gear Walschaerts
Valve typePiston valves
Train brakes Vacuum (primary), Air
Performance figures
Tractive effort 26,520 lbf (118.0 kN)
Career
Class Patriot Class
Numbers5551 (LMS Colours)
45551 (BR Colours)
98651 (TOPS)
Official nameThe Unknown Warrior
First runOriginal - May 1934, Replica -
RetiredJune 1962
DispositionOriginal locomotive scrapped, rebuilt under construction

No.5551 The Unknown Warrior is a replica LMS Patriot Class steam locomotive which is under construction at Tyseley Locomotive Works.

Contents

The locomotive is a replica of the final 'Patriot' class locomotive to be built, No.5551. The original locomotive was built in May 1934, and withdrawn in June 1962 (it was scrapped that October). Unlike the original engine, which never received a name, the new one will be named "The Unknown Warrior"; the name was chosen by public poll.

All of the original un-rebuilt LMS Patriot Class locomotives were withdrawn by November 1962 and the whole class was withdrawn by December 1965 with none of the engines (un-rebuilt or rebuilt) surviving into preservation.

Original engine

The original 5551/45551 was built at Crewe Works in May 1934 and unlike many other members of its class which were given names, it alongside nine other class members was not named. Sheds that it was allocated to over the years included: Crewe North (5A), Carlisle Upperby (12B), Camden (1B), Willesden (1A) and Edge Hill (8A). Edge Hill was the last shed it was allocated to, being transferred there in June 1961 and remaining there for twelve months until withdrawal.[ citation needed ]

It was also one of thirty four members of its class to be kept in its original unrebuilt condition prior to its final withdrawal in June 1962, its final working life was twenty eight years and one month. It was later cut up for scrap in October of the same year at its birthplace Crewe Works.[ citation needed ]

Replica

Overview

The LMS-Patriot Project, a registered charity in England and Wales (No. 6502248 / No. 1123521), [1] is constructing a replica locomotive at Tyseley Locomotive Works.

As of April 2017 the project engineering update showed that the engine has had its wheels fitted and also the brake system, pistons, valves, motion plus boiler are all being worked on. [2] In November it was announced by the group who were building "The Unknown Warrior" that there had been a few problems arising with the Royal British Legion who were supporting the construction of the engine, and with deep regret it was announced that the RBL could no longer support the loco group which also meant that the RBL's crest above the engines nameplates would have to be removed. A new set of crests would be placed above the engines nameplates as a result but the RBL will still support the Patriot project and vice versa as its still planned for the completed engine to be known as "The National Memorial Steam Engine". [3]

In October 2018 the Llangollen Railway, where the locomotive had been assembled to date, announced that they were no longer able to build 5551, the decision being made due to the length of the list for the railways own locomotives that needed overhauls and repairs undertaking alongside other new build locomotive projects at the line including 6880 Betton Grange. [4] The locomotive was then moved to PRCLT's west shed on the Midland Railway near Butterley. An invitation to tender had been sent to four contractors who have expressed interest. The Princess Royal Class Locomotive Trust was chosen as they were deemed to best fit the requirements of 5551's board. [5] Construction of the engine's boiler is now being undertaken at Heritage Boiler Steam Services Ltd in Liverpool.[ citation needed ]

In December 2023 the locomotive and project was transferred to Tyseley Locomotive Works, where assembly will continue.

Name, number and liveries

The chassis of The Unknown Warrior inside the shed at Llangollen, the firemans side of the cab was painted in BR Lined Green. 45551 The Unknown Warrior inside Llangollen Shed.jpg
The chassis of The Unknown Warrior inside the shed at Llangollen, the firemans side of the cab was painted in BR Lined Green.
The Unknown Warrior's driver side nameplate with the RBL (Royal British Legion) crest placed above the nameplate. The Unknown Warrior's driver side nameplate.jpg
The Unknown Warrior's driver side nameplate with the RBL (Royal British Legion) crest placed above the nameplate.
The Unknown Warrior's drivers side nameplate with the new crest placed above it replacing the RBL's crest which needed to be removed. The Unknown Warrior nameplate and crest.jpg
The Unknown Warrior's drivers side nameplate with the new crest placed above it replacing the RBL's crest which needed to be removed.
5551's drivers side cabside painted in its former LMS colours of crimson lake. 5551's LMS Crimson cabside.jpg
5551's drivers side cabside painted in its former LMS colours of crimson lake.

The original 5551/45551 never carried a name during its career under LMS & BR ownership, a competition was set up to choose a name for the new engine with examples of nameplates being: Patriot, Hero, Remembrance, Wilfred Owen, British Legion and The Falklands. Alongside names based on regiments, the military & war heroes there were other names entered into the competition which included: Henry Fowler, Winston Churchill, Sir Edward Elgar, Fred Dibnah, Robert Riddles, Baby Scot (nickname for class), Jack Mills (Great Train Robbery), Crewe & Llangollen. [6] Following a public vote to decide on the engines' name, the engine was named "The Unknown Warrior", after the tomb in London which holds an unidentified soldier who was killed on the battlefront during the First World War. It was also decided for the engine to carry the Royal British Legion's crest above its nameplates. Following a request by the RBL their crest had to be removed from the engine, a replacement crest was unveiled during a recent event in Crewe. [7]

The liveries that the original Patriots wore included: LMS Crimson Lake, LMS Black, BR Black & BR Green. For a while during the locomotive's construction, the engine wore crimson lake on the left side of its cab and BR Green on the right, this being to give an idea to the public of what it would look like in either livery when completed and running. It was announced in November 2016 during the Patriot Group's annual meeting at Crewe Heritage Centre that the first livery that "The Unknown Warrior" would wear on completion would be LMS Crimson Lake, with the three remaining liveries applied at later dates. [8]

Project launch

The project was formally launched at the Llangollen Patriot Gala in April 2008, by the project's first commercial sponsor, John Buxton, Managing Director of Cambrian Transport. [9] The Frames Appeal was also announced at the gala and a membership scheme was later launched.

Project milestones

Construction

Although most parts that are being manufactured for "The Unknown Warrior" are brand new, a number of parts off fellow preserved engines will also be used. An example of parts that will be used in the construction of the Patriot include the leading front wheelset from LMS 8F 2-8-0 no 48518, a set of LMS Fowler Tenders (both of which being from Woodham Brothers scrapyard at Barry Island) are also going to be used in the project. Examples of new parts that will be constructed for "The Unknown Warrior" alongside the frame include the driving wheels and the second Fowler tender (the first having usable parts but not fit for re-use itself due to corrosion).[ citation needed ]

Frames

On 31 March 2009, two frame plates were cut at Corus Group plc Steel, Cradley Heath in the West Midlands. Measuring 39 ft in length 4 ft high and 1 1/8 in thick (28 mm), the frame plates were then taken to the Boro Foundry, at Lye, West Midlands, for machining and drilling, before being taken to the Llangollen Railway Works where assembly is in progress. The dragbox has been fitted to the frames, the front buffer beam fitted, the bogie bolster has been cast and has been fitted, all five of the five frame stretchers have been cast and are fitted to the frames.[ citation needed ]

Wheels

In September 2010, the first driving wheel was cast at the Boro Foundry, using the pattern made for LMS Jubilee Class 45699 Galatea. The two classes share the same size 6'9" driving wheels. The six new driving wheels have been cast by The Boro Foundry Stourbridge and machined and assembled by the South Devon Railway. [18] In July 2021, it was reported that all six wheels had suffered from widespread metal fatigue cracking and would need to be replaced. [19]

Boiler

At The LMS Patriot Project's 2010 AGM on 14 November, it was announced that the boiler for 'The Unknown Warrior' would be built by L&NWR Heritage at Crewe. The new boiler will be of traditional construction with a copper firebox. A fundraising campaign for the boiler for £1/2million has been launched. The smokebox and front tubeplate have been manufactured and were fitted to the locomotive in July 2013. The copper firebox was under construction at L&NWR Heritage at Crewe and was expected to be complete by the end of 2015, with construction of the boiler proper scheduled to begin in January 2016 with completion scheduled for the end of 2016. On 9 May 2017, L&NWR Heritage informed The LMS Patriot Project that it had decided to end all sub-contract work, and would not be completing the boiler. [20] L&NWR Heritage did a little more work on the boiler, culminating in riveting the foundation ring to the inner firebox. The newly-formed Heritage Boiler Steam Services Ltd. was selected to complete the boiler, and on 30 November 2017 the partially-completed boiler was moved to HBSS' new facility. [21]

Completion

The completion date was intended to be 2018 with a formal dedication planned for the 100th anniversary of the end of the First World War. That target was not met. It was later estimated that the locomotive might be in steam by late 2020. Again this was not met, not helped by the COVID-19 Pandemic. [22]

The engine's full completion was then expected to be 2029 but during the society's AGM in 2023 it was decided that to save time and get the engine running two years earlier aswell as reduce costs the project is now deferring certification of the locomotive to mainline standards with the required equipment not being fitted. The intention now is to get the engine running on heritage railways first and at a later date the engine will be completed to mainline standards with the fitment of AWS, TPWS, OTMR, GSM-R & Speedometer. 5551 is now expected to be completed by 2027. [23]

See also

Related Research Articles

<span class="mw-page-title-main">Steam locomotive</span> Railway locomotive that produces its pulling power through a steam engine

A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels.

<span class="mw-page-title-main">BR Standard Class 3 2-6-2T</span>

The BR Standard Class 3 2-6-2T was a class of steam locomotive designed by Robert Riddles for British Railways. It was essentially a hybrid design, the chassis being closely based on and sharing a number of parts with the LMS Ivatt Class 4, and having a boiler derived from a GWR No.2 boiler as fitted to the GWR Large Prairie 2-6-2T and 5600 Class 0-6-2T tank engines.

<span class="mw-page-title-main">LMS Stanier Class 5 4-6-0</span> British class of steam locomotives

The London, Midland and Scottish Railway (LMS) Stanier Class 5 4-6-0, commonly known as the Black Five, is a class of 4-6-0 steam locomotives. It was introduced by William Stanier and built between 1934 and 1951. A total of 842 were built initially numbered 4658-5499 then renumbered 44658-45499 by BR. Several members of the class survived to the last day of steam on British Railways in 1968, and eighteen are preserved.

<span class="mw-page-title-main">LMS Patriot Class</span> Class of British locomotives

The Patriot Class was a class of 52 express passenger steam locomotives built for the London Midland and Scottish Railway. The first locomotive of the class was built in 1930 and the last in 1934. The class was based on the chassis of the Royal Scot combined with the boiler from Large Claughtons earning them the nickname Baby Scots. A total of 18 were rebuilt to create the LMS Rebuilt Patriot Class between 1946 and 1948; thereafter those not subjected to rebuilding were often referred to as the Unrebuilt Patriot Class. These remaining 34 unrebuilt engines were withdrawn between 1960 and 1962.

<span class="mw-page-title-main">LMS Fowler 2-6-4T</span>

The London, Midland and Scottish Railway (LMS) Fowler 2-6-4T was a class of steam locomotive passenger tank engine designed by Henry Fowler.

<span class="mw-page-title-main">SR West Country and Battle of Britain classes</span> Class of 110 three-cylinder 4-6-2 locomotives

The SR West Country and Battle of Britain classes, collectively known as Light Pacifics or informally as Spam Cans, or "flat tops", are air-smoothed 4-6-2 Pacific steam locomotives designed for the Southern Railway by its Chief Mechanical Engineer Oliver Bulleid. Incorporating a number of new developments in British steam locomotive technology, they were amongst the first British designs to use welding in the construction process, and to use steel fireboxes, which meant that components could be more easily constructed under wartime austerity and post-war economy.

LMR 57 <i>Lion</i> Liverpool and Manchester Railway steam locomotive

The Liverpool and Manchester Railway (LMR) 57 Lion is an early 0-4-2 steam locomotive, which had a top speed of 40 mph (64 km/h) and could pull up to 200 tons. One of a pair designed for hauling freight, Lion was built by Todd, Kitson & Laird of Leeds in 1838. It featured in the 1953 Ealing comedy, The Titfield Thunderbolt.

<span class="mw-page-title-main">GWR 1000 Class</span>

The Great Western Railway 1000 Class or County Class was a class of 4-6-0 steam locomotive. Thirty examples were built between 1945 and 1947, but all were withdrawn and scrapped in the early 1960s. A replica locomotive is under construction.

<i>Novelty</i> (locomotive) Early experimental locomotive

Novelty was an early steam locomotive built by John Ericsson and John Braithwaite to take part in the Rainhill Trials in 1829.

BR Standard Class 7 70000 <i>Britannia</i> Preserved 4-6-2 British steam locomotive

British Railways Standard Class 7 'Britannia Class' No. 70000 Britannia is a preserved steam locomotive, owned by the Royal Scot Locomotive and General Trust.

LNER Peppercorn Class A1 60163 <i>Tornado</i> British steam locomotive built in 2008

LNER Peppercorn Class A1 No. 60163 Tornado is a 4-6-2 steam locomotive completed in 2008 to an original design by Arthur Peppercorn. It is the first new build British mainline steam locomotive since 1960, and the only Peppercorn Class A1 in existence after the original batch were scrapped. In 2017, Tornado became the first steam locomotive to officially reach 100 mph (160 km/h) on British tracks in over 50 years.

<span class="mw-page-title-main">LNWR 1185 Class</span>

The LNWR 1185 Class was a class of 0-8-2T steam tank locomotives designed by Charles Bowen-Cooke and introduced in 1911. They passed into LMS ownership in 1923 and 8 survived to British Railways ownership in 1948. British Railways numbers were 47875-47896.

The LMS (Northern Counties Committee)Class B3 4-4-0 passenger steam locomotives were rebuilds of Belfast and Northern Counties Railway (BNCR) two-cylinder compound locomotives. They operated services throughout the NCC's 5 ft 3 in (1,600 mm) broad gauge system in the north-east of Ireland.

GWR 6800 Class 6880 <i>Betton Grange</i> New-build British 4-6-0 locomotive

GWR 6800 Class No. 6880 Betton Grangeis a steam locomotive built between 1998 and 2024 as a "new-build" project, originally based on the Llangollen Railway in Denbighshire, Wales, then subsequently at Tyseley Locomotive Works. Described as "building the 81st Grange", the project started in 1998, and the locomotive was earlier expected to be operational by 2013, but subsequently by Autumn 2021, which was then pushed back to 2024. It was expected to be launched under steam in a private member event in January 2024 but was postponed a week before the event. On 11 April 2024, 6880 was steamed up for the first time after more than 25 years of work. All of the original GWR 6800 Class Grange locomotives were withdrawn for scrap by the end of 1965; this project is a creation, from an assemblage of original GWR and newly manufactured components, of a member of this class.

<span class="mw-page-title-main">LNER Class O6</span>

The London and North Eastern Railway (LNER) Class O6 was a class of 2-8-0 steam locomotives of the Stanier Class 8F type.

<span class="mw-page-title-main">LMS Stanier Class 5 4-6-0 4806</span> Preserved British 4-6-0 locomotive

LMS Stanier Class 5 4-6-0 No. 44806 is a preserved British steam locomotive. It was built at Derby in 1944.

<span class="mw-page-title-main">Launch-type boiler</span>

A launch-type, gunboat or horizontal multitubular boiler is a form of small steam boiler. It consists of a cylindrical horizontal shell with a cylindrical furnace and fire-tubes within this.

<span class="mw-page-title-main">Steam locomotives of the 21st century</span> Steam power on modern railways

Despite the advent of electric and diesel locomotives in the mid-20th century, steam locomotives continued to be used and constructed into the 21st century. The regular use of steam locomotives in non-tourist revenue service concluded in 2024.

GWR 1000 Class 1014 <i>County of Glamorgan</i>

No.1014 County of Glamorgan is a steam locomotive which is under construction as a "new-build" project, based at Didcot Railway Centre in Didcot, Oxfordshire. Unlike most other new-build projects which are underway and are building new members of lost classes like 2007 Prince of Wales and 2999 Lady of Legend it was decided to build a mock of one of the Great Western Railway 1000 or "County" Class engines, the chosen engine being 1014 The project was launched in 2005 with the creation of the 'Three Counties Agreement' between the Great Western Society (GWS) and the Vale of Glamorgan Council saw three members of the Barry 10, all of the being ex-GWR locomotives, and a 3,500-gallon tender being used to help resurrect extinct GWR locomotives. This meant that a GWR 1000 Class No. 1014 County of Glamorgan, GWR 3800 Class No. 3840 County of Montgomery, a GWR 2221 Class tank engine, and a GWR 4700 Class No. 4709 would be constructed from the parts of GWR 2800 Class No. 2861, GWR 5101 Class No. 4115, GWR 5205 Class No. 5227, GWR 6959 Class No. 7927 Willington Hall and LMS 8F No. 48518.

LNER P2 Class 2007 <i>Prince of Wales</i> British steam locomotive under construction

LNER Class P2 No. 2007 Prince of Wales is a 2-8-2 "Mikado" steam locomotive being built at Darlington Locomotive Works, England, and managed by the A1 Steam Locomotive Trust. It will be the seventh member of its class and the only P2 in existence; the original six were built between 1934 and 1936 for the London and North Eastern Railway (LNER) to a design by Nigel Gresley, and employed to haul heavy passenger trains on the Edinburgh to Aberdeen line. The P2s were declared Britain's most powerful express passenger engines, although none were preserved.

References

  1. ↑ "Welcome Aboard". The LMS Patriot Project.
  2. ↑ "Engineering Update - April 2017 | The LMS-Patriot Project". www.lms-patriot.org.uk.
  3. ↑ "Statement regarding the Royal British Legion and the LMS-Patriot Project | The LMS-Patriot Project". www.lms-patriot.org.uk.
  4. ↑ Holden, Michael (4 October 2018). "Llangollen Railway to stop work on steam locomotive No.45551 The Unknown Warrior".
  5. ↑ "The LMS-Patriot Company Announces New Contractor to Complete 'The Unknown Warrior' | The LMS-Patriot Project". lms-patriot.org.uk.
  6. ↑ "Suggested Names for the Patriot | The LMS-Patriot Project". www.lms-patriot.org.uk.
  7. ↑ "Simon Weston CBE unveils crest on 'The Unknown Warrior'". www.lms-patriot.org.uk.
  8. ↑ "LMS Crimson Lake Livery to be Carried First by 'The Unknown Warrior' | The LMS-Patriot Project". www.lms-patriot.org.uk.
  9. ↑ "Cambrian Transport Limited". cambriantransport.com.
  10. ↑ https://www.lms-patriot.org.uk/engineering/2018-05-10/engineering-date-may-2018-2018 Engineering Update, May 2018
  11. ↑ https://www.lms-patriot.org.uk/engineering/2018-07-01/45551-boiler-update The Unknown Warrior boiler update
  12. ↑ https://www.lms-patriot.org.uk/news/2018-08-06/inner-firebox-trial-fitted Inner Firebox trial fitted
  13. ↑ https://www.railadvent.co.uk/2018/10/llangollen-railway-to-stop-work-on-steam-locomotive-no-45551-the-unknown-warrior.html Llangollen Railway stop work on 45551
  14. ↑ https://www.lms-patriot.org.uk/news/2018-11-12/simon-weston-cbe-unveils-crest-unknown-warrior Simon Weston unveils crest
  15. ↑ https://www.lms-patriot.org.uk/news/2019-08-13/5551-unknown-warrior-moves-west-shed Unknown Warrior moves to Midland Rly
  16. ↑ "5551 The Unknown Warrior back on track - New axle material supplier found for steam locomotive". RailAdvent. 4 June 2021.
  17. ↑ https://www.railadvent.co.uk/2022/06/first-replacement-driving-wheels-cast-for-steam-locomotive-5551-the-unknown-warrior.html/
  18. ↑ "South Devon Railway Engineering Ltd | Specialists in locomotive repair, maintenance and restoration | Engineers to the heritage sector and National Rail Train Operating Companies". Southdevonrailway.co.uk. Retrieved 24 February 2012.
  19. ↑ "All six driving wheels for steam locomotive 5551 The Unknown Warrior need replacing". RailAdvent. 19 July 2021. Retrieved 2 August 2021.
  20. ↑ "Boiler Manufacture - May 2017". 25 May 2017. Retrieved 23 September 2018.
  21. ↑ "Patriot boiler moves to West Shed as contract is signed". 29 November 2017. Retrieved 23 September 2018.
  22. ↑ Kevin, West. "Engineering Update - February 2021". lms-patriot.org.uk. Archived from the original on 9 July 2021.
  23. ↑ "5551 to steam in 2027". Steam Railway. No. 553. December 2023. p. 15.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.