Land equivalent ratio

Last updated December 12, 2022

The land equivalent ratio is a concept in agriculture that describes the relative land area required under sole cropping (monoculture) to produce the same yield as under intercropping (polyculture).^[1]

Definition

The FAO defines land equivalent ratio (LER) as:^[2]

the ratio of the area under sole cropping to the area under intercropping needed to give equal amounts of yield at the same management level. It is the sum of the fractions of the intercropped yields divided by the sole-crop yields.

For a scenario where a total of $\textstyle m$ crops are intercropped, the land equivalent ratio LER can be calculated as

LER=\sum _{i=1}^{m}{\frac {IY_{i}}{SY_{i}}}

where $\textstyle m$ is the number of different crops intercropped, $\textstyle IY_{i}$ is the yield for the $\textstyle i^{th}$ crop under intercropping, and $\textstyle SY_{i}$ is the yield for the $\textstyle i^{th}$ crop under a sole-crop regime on the same area.

Example calculation

The table in this section provides yield values for a hypothetical scenario intercropping a grain crop with a fruit tree crop.

The first two columns state the yields for intercropping (IY) and sole yields (SY). The third column, equivalent area, column calculates the area of sole cropping land required to achieve the same yield as 1 ha of intercropping, at the same management level.

Crop	Intercropped Yield IY (kg/ha)	Sole Yield SY (kg/ha)	Equivalent area (ha)
Grain	4,000	5,000	0.8
Fruit	9,000	15,000	0.6
Land equivalent ratio			1.4

The land equivalent ration can be calculated as

LER=\sum _{i=1}^{m}{\frac {IY_{i}}{SY_{i}}}={\frac {IY_{grain}}{SY_{grain}}}+{\frac {IY_{fruit}}{SY_{fruit}}}={\frac {4,000}{5,000}}+{\frac {9,000}{15,000}}=0.8+0.6=1.4

An interpretation of this result would be that a total of 1.4 ha of sole cropping area would be required to produce the same yields as 1 ha of the intercropped system.

Applications

The land equivalent ratio can be used whenever more than one type of yield can be obtained from the same area. This can be intercropping of annual crops (e.g. sorghum and pigeonpea)^[1] or combination of annual and perennial crops e.g. in agroforestry systems (e.g. jackfruit and eggplant).^[3]

It is also possible to calculate LERs for combinations of plant and non-plant yields, e.g. in agrivoltaic systems.^[4]

The table below lists some examples for land equivalent ratios published in scientific journals:

Crops	Country/region	LER	Source
eggplant, jackfruit	Bangladesh	2.17	^[3]
cocoa, coconut	Mexico	1.36	^{[ citation needed ]}
solar electricity, maize	Italy	1.23 - 2.05	^[5]
ginger, maize, soybean	Nepal	2.45	^[6]
maize, cowpea	Nepal	1.58	^[6]
millet, soybean	Nepal	1.40	^[6]

Related Research Articles

<span class="mw-page-title-main">Exponential function</span> Mathematical function, denoted exp(x) or e^x

The exponential function is a mathematical function denoted by $or . Unless otherwise specified, the term generally refers to the positive-valued function of a real variable, although it can be extended to the complex numbers or generalized to other mathematical objects like matrices or Lie algebras. The exponential function originated from the notion of exponentiation, but modern definitions allow it to be rigorously extended to all real arguments, including irrational numbers. Its ubiquitous occurrence in pure and applied mathematics led mathematician Walter Rudin to opine that the exponential function is "the most important function in mathematics".$

In mathematics, the geometric mean is a mean or average which indicates a central tendency of a set of numbers by using the product of their values. The geometric mean is defined as the $n$ th root of the product of $n$ numbers, i.e., for a set of numbers $a 1, a 2, ..., a n$ , the geometric mean is defined as

In mathematics, the logarithm is the inverse function to exponentiation. That means the logarithm of a number $x$ to the base $b$ is the exponent to which $b$ must be raised, to produce $x$ . For example, since $1000 = 10 3$ , the logarithm base 10 of $1000$ is $3$ , or $log 10 (1000) = 3$ . The logarithm of $x$ to base $b$ is denoted as $log b (x)$ , or without parentheses, $log b x$ , or even without the explicit base, $log x$ , when no confusion is possible, or when the base does not matter such as in big O notation.

In physics, the Maxwell–Boltzmann distribution, or Maxwell(ian) distribution, is a particular probability distribution named after James Clerk Maxwell and Ludwig Boltzmann.

In mathematics, mathematical physics and the theory of stochastic processes, a harmonic function is a twice continuously differentiable function $where U is an open subset of that satisfies Laplace's equation, that is,$

In mathematics, the radius of convergence of a power series is the radius of the largest disk at the center of the series in which the series converges. It is either a non-negative real number or $. When it is positive, the power series converges absolutely and uniformly on compact sets inside the open disk of radius equal to the radius of convergence, and it is the Taylor series of the analytic function to which it converges. In case of multiple singularities of a function, the radius of convergence is the shortest or minimum of all the respective distances calculated from the center of the disk of convergence to the respective singularities of the function.$

In statistics, Spearman's rank correlation coefficient or Spearman's ρ, named after Charles Spearman and often denoted by the Greek letter (rho) or as $, is a nonparametric measure of rank correlation. It assesses how well the relationship between two variables can be described using a monotonic function.$

Intercropping is a multiple cropping practice that involves growing two or more crops in proximity. In other words, intercropping is the cultivation of two or more crops simultaneously on the same field. The most common goal of intercropping is to produce a greater yield on a given piece of land by making use of resources or ecological processes that would otherwise not be utilized by a single crop.

Compound interest is the addition of interest to the principal sum of a loan or deposit, or in other words, interest on principal plus interest. It is the result of reinvesting interest, or adding it to the loaned capital rather than paying it out, or requiring payment from borrower, so that interest in the next period is then earned on the principal sum plus previously accumulated interest. Compound interest is standard in finance and economics.

Blade element theory (BET) is a mathematical process originally designed by William Froude (1878), David W. Taylor (1893) and Stefan Drzewiecki to determine the behavior of propellers. It involves breaking a blade down into several small parts then determining the forces on each of these small blade elements. These forces are then integrated along the entire blade and over one rotor revolution in order to obtain the forces and moments produced by the entire propeller or rotor. One of the key difficulties lies in modelling the induced velocity on the rotor disk. Because of this the blade element theory is often combined with momentum theory to provide additional relationships necessary to describe the induced velocity on the rotor disk, producing blade element momentum theory. At the most basic level of approximation a uniform induced velocity on the disk is assumed:

In information theory, turbo codes are a class of high-performance forward error correction (FEC) codes developed around 1990–91, but first published in 1993. They were the first practical codes to closely approach the maximum channel capacity or Shannon limit, a theoretical maximum for the code rate at which reliable communication is still possible given a specific noise level. Turbo codes are used in 3G/4G mobile communications and in satellite communications as well as other applications where designers seek to achieve reliable information transfer over bandwidth- or latency-constrained communication links in the presence of data-corrupting noise. Turbo codes compete with low-density parity-check (LDPC) codes, which provide similar performance.

In statistics, G-tests are likelihood-ratio or maximum likelihood statistical significance tests that are increasingly being used in situations where chi-squared tests were previously recommended.

The maximum distortion criterion states that yielding of a ductile material begins when the second invariant of deviatoric stress $reaches a critical value. It is a part of plasticity theory that mostly applies to ductile materials, such as some metals. Prior to yield, material response can be assumed to be of a nonlinear elastic, viscoelastic, or linear elastic behavior.$

In geometry, hyperbolic angle is a real number determined by the area of the corresponding hyperbolic sector of xy = 1 in Quadrant I of the Cartesian plane. The hyperbolic angle parametrises the unit hyperbola, which has hyperbolic functions as coordinates. In mathematics, hyperbolic angle is an invariant measure as it is preserved under hyperbolic rotation.

In classical mechanics, the shell theorem gives gravitational simplifications that can be applied to objects inside or outside a spherically symmetrical body. This theorem has particular application to astronomy.

Magnetic reluctance, or magnetic resistance, is a concept used in the analysis of magnetic circuits. It is defined as the ratio of magnetomotive force (mmf) to magnetic flux. It represents the opposition to magnetic flux, and depends on the geometry and composition of an object.

In applied mathematics, the Joukowsky transform, named after Nikolai Zhukovsky, is a conformal map historically used to understand some principles of airfoil design.

In electromagnetics, directivity is a parameter of an antenna or optical system which measures the degree to which the radiation emitted is concentrated in a single direction. It is the ratio of the radiation intensity in a given direction from the antenna to the radiation intensity averaged over all directions. Therefore, the directivity of a hypothetical isotropic radiator is 1, or 0 dBi.

In mathematics, sine and cosine are trigonometric functions of an angle. The sine and cosine of an acute angle are defined in the context of a right triangle: for the specified angle, its sine is the ratio of the length of the side that is opposite that angle to the length of the longest side of the triangle, and the cosine is the ratio of the length of the adjacent leg to that of the hypotenuse. For an angle $, the sine and cosine functions are denoted simply as and .$

In colorimetry, CIECAM02 is the color appearance model published in 2002 by the International Commission on Illumination (CIE) Technical Committee 8-01 and the successor of CIECAM97s.

References

1 2 Mead, R.; Willey, R. W. (3 October 2008). "The Concept of a 'Land Equivalent Ratio' and Advantages in Yields from Intercropping" (PDF). Experimental Agriculture. 16 (3): 217. doi:10.1017/S0014479700010978. S2CID 84769811.
↑ Guidelines: land evaluation for irrigated agriculture. Food and Agricultization of the United Nations. pp. Glossary. ISBN 92-5-102243-7.
1 2 Rahaman, Md. Abiar; Rahman, Atiqur; Miah, Md. Giashuddin; Hoque, Md. Azizul; Rahman, Md. Mezanur (27 February 2018). "Productivity and Profitability of Jackfruit-Eggplant Agroforestry System in the Terrace Ecosystem of Bangladesh". Turkish Journal of Agriculture - Food Science and Technology. 6 (2): 124. doi: 10.24925/turjaf.v6i2.124-129.1330 .
↑ Majumdar, Debaleena; Pasqualetti, Martin J. (February 2018). "Dual use of agricultural land: Introducing 'agrivoltaics' in Phoenix Metropolitan Statistical Area, USA". Landscape and Urban Planning. 170: 150–168. doi:10.1016/j.landurbplan.2017.10.011.
↑ Amaducci, Stefano; Yin, Xinyou; Colauzzi, Michele (June 2018). "Agrivoltaic systems to optimise land use for electric energy production". Applied Energy. 220: 545–561. doi:10.1016/j.apenergy.2018.03.081. S2CID 116236509.
1 2 3 Chapagain, Tejendra; Pudasaini, Roshan; Ghimire, Bhawana; Gurung, Khem; Choi, Khem; Rai, Laxmi; Magar, Samjhana; BK, Bishnu; Raizada, Manish N. (October 2018). "Intercropping of maize, millet, mustard, wheat and ginger increased land productivity and potential economic returns for smallholder terrace farmers in Nepal". Field Crops Research. 227: 91–101. doi:10.1016/j.fcr.2018.07.016. S2CID 92717782.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[mead-1] 1 2 Mead, R.; Willey, R. W. (3 October 2008). "The Concept of a 'Land Equivalent Ratio' and Advantages in Yields from Intercropping" (PDF). Experimental Agriculture. 16 (3): 217. doi:10.1017/S0014479700010978. S2CID 84769811.

[FAO1-2] Guidelines: land evaluation for irrigated agriculture. Food and Agricultization of the United Nations. pp. Glossary. ISBN 92-5-102243-7.

[rahaman-3] 1 2 Rahaman, Md. Abiar; Rahman, Atiqur; Miah, Md. Giashuddin; Hoque, Md. Azizul; Rahman, Md. Mezanur (27 February 2018). "Productivity and Profitability of Jackfruit-Eggplant Agroforestry System in the Terrace Ecosystem of Bangladesh". Turkish Journal of Agriculture - Food Science and Technology. 6 (2): 124. doi: 10.24925/turjaf.v6i2.124-129.1330 .

[4] Majumdar, Debaleena; Pasqualetti, Martin J. (February 2018). "Dual use of agricultural land: Introducing 'agrivoltaics' in Phoenix Metropolitan Statistical Area, USA". Landscape and Urban Planning. 170: 150–168. doi:10.1016/j.landurbplan.2017.10.011.

[5] Amaducci, Stefano; Yin, Xinyou; Colauzzi, Michele (June 2018). "Agrivoltaic systems to optimise land use for electric energy production". Applied Energy. 220: 545–561. doi:10.1016/j.apenergy.2018.03.081. S2CID 116236509.

[chapagain-6] 1 2 3 Chapagain, Tejendra; Pudasaini, Roshan; Ghimire, Bhawana; Gurung, Khem; Choi, Khem; Rai, Laxmi; Magar, Samjhana; BK, Bishnu; Raizada, Manish N. (October 2018). "Intercropping of maize, millet, mustard, wheat and ginger increased land productivity and potential economic returns for smallholder terrace farmers in Nepal". Field Crops Research. 227: 91–101. doi:10.1016/j.fcr.2018.07.016. S2CID 92717782.

[1]

[2]

[3]

[4]

[5]

[6]