Lava lamp

Last updated

Lava lamps Lava lamps (16136876840).jpg
Lava lamps
An original Mathmos Astro lava lamp 1990s Mathmos Astro.jpg
An original Mathmos Astro lava lamp

A lava lamp is a decorative lamp, invented in 1963 by British entrepreneur Edward Craven Walker, the founder of the lighting company Mathmos.

Contents

It consists of a bolus of a special coloured wax mixture inside a glass vessel, the remainder of which contains clear or translucent liquid. The vessel is placed on a base containing an incandescent light bulb whose heat causes temporary reductions in the wax's density and the liquid's surface tension. As the warmed wax rises through the liquid, it cools, loses its buoyancy, and falls back to the bottom of the vessel in a cycle that is visually suggestive of pāhoehoe lava, hence the name. The lamps are designed in a variety of styles and colours.

Lava lamps can be associated with hippie and cannabis cultures. [1] [2]

Operation

A blue lava lamp Blue Lava lamp.JPG
A blue lava lamp

A classic lava lamp contains a standard incandescent or halogen lamp which heats a tall (often tapered) glass bottle. A formula from a 1968 US patent consisted of water and a transparent, translucent, or opaque mix of mineral oil, paraffin wax, and carbon tetrachloride. [3] p. 2, line 30 The clear water or mineral oil can optionally be coloured with translucent dyes.

Common wax has a density much lower than that of water and would float on top at any temperature. However, carbon tetrachloride is denser than water (also nonflammable and miscible with wax) and is added to the wax to make its density at room temperature slightly higher than that of the water. When heated, the wax mixture becomes less dense than the water, because it expands more than water when both are heated. [3] p. 1, lines 40 & 45 It also becomes fluid, causing blobs of it to ascend to the top of the lamp. There, they cool, increasing their density relative to that of the water, and descend. [3] p. 1, line 47 A metallic wire coil in the bottle's base breaks the cooled blobs' surface tension, allowing them to recombine.

Video of an orange lava lamp in operation

Since 1970, lava lamps made for the US market have not used carbon tetrachloride, the use of which was banned that year due to toxicity. [4] Haggerty, their current manufacturer, has stated that their current formulation is a trade secret. [5]

The underlying fluid mechanics phenomenon in lava lamps is a form of Rayleigh–Taylor instability.

The bulb is normally 25 to 40 watts. It generally takes 45–60 minutes for the wax to warm up enough to form freely rising blobs, when operating the lamp at standard room temperature, and as long as 2 to 3 hours if the room is cooler.[ citation needed ]

Once the wax is molten, the lamp should not be agitated, or the two fluids may emulsify, and the fluid surrounding the wax blobs will remain cloudy rather than clear. Some recombination will occur as part of the normal cycle of the wax in the container, but the only way to recombine all of the wax is to turn off the lamp and wait for a few hours. The wax then settles back to the bottom, forming one blob once again. Severe cases can require many heating-cooling cycles to clear. [ citation needed ]

In 2015, a new design was introduced that uses ferrofluid in place of wax. [6]

History

Former Lava Lamp factory, at 1650 Irving Park Road, Chicago Lava Lamp Factory Chicago IL.jpg
Former Lava Lamp factory, at 1650 Irving Park Road, Chicago

British entrepreneur Edward Craven Walker had the idea for the lava lamp in 1963 after watching a homemade egg timer, made from a cocktail shaker filled with liquids, as it bubbled on a stovetop in a pub. [7] This precursor was designed and patented GBpatent 703924   by Donald Dunnet. [8] Craven Walker hired British inventor David George Smith to develop the device and the chemical formula it required. Smith is credited as the inventor on the original U.S. patent 3,387,396 for a "Display Device" filed and assigned to Craven-Walker's company in 1965, and subsequently issued in 1968. [3] Craven Walker's company, Crestworth, was based in Poole, Dorset, United Kingdom. He named the lamp "Astro" and had variations such as the "Astro Mini" and the "Astro Coach" lantern.

In 1965, Adolph Wertheimer and Hy Spector were intrigued by Walker's product when they saw it at a German trade show. They bought the American rights and began the Lava Manufacturing Corporation in Chicago to sell what they called the Lava Lite Lamp. In the late 1970s, US rights were sold to Larry Haggerty, who created a subsidiary of his company, Haggerty Enterprises, called Lava World International, which produced American lava lamps for over 30 years. [9]

In 2003, American lava lamp maker Lava World International (formerly Lava-Simplex-Scribe Internationale) moved its production to China. In 2008, it was acquired by Talon Merchant Capital and its name was changed to Lava Lite LLC. As of 2016, lava lamps were being sold under Lifespan brands in North America. [10] In 2018, the "Lava Lamp" brand was acquired by toy and gift maker Schylling Inc. of North Andover, MA. [11] who continue to hold the US trademark rights to both the shape and name of LAVA lamp. [12]

When the American rights were sold, Craven Walker retained the rights for the rest of the world, and took on two business partners in the late 1980s, Cressida Granger and David Mulley. They eventually took over the company and changed its name to Mathmos in 1992. Edward Craven Walker remained a consultant to them until his death in 2000. Mathmos continues to make Lava Lamps and related products. They have won two Queens Awards for Export, and the Best Multi-Media prize at the Design Week awards. [13] [14] Astro lava lamp was launched in 1963 and celebrated its 50th anniversary in 2013. [15] Mathmos lava lamps are still made in the original factory in Poole, Dorset.

See also

Related Research Articles

<span class="mw-page-title-main">Cavitation</span> Low-pressure voids formed in liquids

Cavitation in fluid mechanics and engineering normally refers to the phenomenon in which the static pressure of a liquid reduces to below the liquid's vapour pressure, leading to the formation of small vapor-filled cavities in the liquid. When subjected to higher pressure, these cavities, called "bubbles" or "voids", collapse and can generate shock waves that may damage machinery. These shock waves are strong when they are very close to the imploded bubble, but rapidly weaken as they propagate away from the implosion. Cavitation is a significant cause of wear in some engineering contexts. Collapsing voids that implode near to a metal surface cause cyclic stress through repeated implosion. This results in surface fatigue of the metal, causing a type of wear also called "cavitation". The most common examples of this kind of wear are to pump impellers, and bends where a sudden change in the direction of liquid occurs. Cavitation is usually divided into two classes of behavior: inertial cavitation and non-inertial cavitation.

Kerosene, or paraffin, is a combustible hydrocarbon liquid which is derived from petroleum. It is widely used as a fuel in aviation as well as households. Its name derives from Greek: κηρός (kērós) meaning "wax", and was registered as a trademark by Nova Scotia geologist and inventor Abraham Gesner in 1854 before evolving into a generic trademark. It is sometimes spelled kerosine in scientific and industrial usage.

<span class="mw-page-title-main">Magma</span> Hot semifluid material found beneath the surface of Earth

Magma is the molten or semi-molten natural material from which all igneous rocks are formed. Magma is found beneath the surface of the Earth, and evidence of magmatism has also been discovered on other terrestrial planets and some natural satellites. Besides molten rock, magma may also contain suspended crystals and gas bubbles.

<span class="mw-page-title-main">Convection</span> Fluid flow that occurs due to heterogeneous fluid properties and body forces

Convection is single or multiphase fluid flow that occurs spontaneously due to the combined effects of material property heterogeneity and body forces on a fluid, most commonly density and gravity. When the cause of the convection is unspecified, convection due to the effects of thermal expansion and buoyancy can be assumed. Convection may also take place in soft solids or mixtures where particles can flow.

<span class="mw-page-title-main">Boiling</span> Rapid phase transition from liquid to gas or vapour

Boiling or ebullition is the rapid phase transition from liquid to gas or vapor; the reverse of boiling is condensation. Boiling occurs when a liquid is heated to its boiling point, so that the vapour pressure of the liquid is equal to the pressure exerted on the liquid by the surrounding atmosphere. Boiling and evaporation are the two main forms of liquid vapourization.

<span class="mw-page-title-main">Volcanism</span> Phenomenon where interior material reaches the surface of an astronomical object

Volcanism, vulcanism, volcanicity, or volcanic activity is the phenomenon where solids, liquids, gases, and their mixtures erupt to the surface of an astronomical body. It is caused by the presence of an internal heat source in a solid-surface planet, minor planet or moon. Inside the body, heat partially melts solid material or turns material into gas. The mobilized material rises through the body's interior and then, if conditions are favorable, the mobile material breaks through the solid surface.

<span class="mw-page-title-main">Heat transfer</span> Transport of thermal energy in physical systems

Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes. Engineers also consider the transfer of mass of differing chemical species, either cold or hot, to achieve heat transfer. While these mechanisms have distinct characteristics, they often occur simultaneously in the same system.

<span class="mw-page-title-main">Carbon tetrachloride</span> Chemical compound

Carbon tetrachloride, also known by many other names (such as carbon tet for short and tetrachloromethane, also recognised by the IUPAC) is a chemical compound with the chemical formula CCl4. It is a non-flammable, dense, colourless liquid with a "sweet" chloroform-like odour that can be detected at low levels. It was formerly widely used in fire extinguishers, as a precursor to refrigerants and as a cleaning agent, but has since been phased out because of environmental and safety concerns. Exposure to high concentrations of carbon tetrachloride can affect the central nervous system and degenerate the liver and kidneys. Prolonged exposure can be fatal.

<span class="mw-page-title-main">Spermaceti</span> Waxy substance found in the head cavities of sperm whales

Spermaceti is a waxy substance found in the head cavities of the sperm whale. Spermaceti is created in the spermaceti organ inside the whale's head. This organ may contain as much as 1,900 litres (500 US gal) of spermaceti. It has been extracted by whalers since the 17th century for human use in cosmetics, textiles, and candles.

<span class="mw-page-title-main">Ferrofluid</span> Special type of liquid which is attracted by poles of a magnet

Ferrofluid is a liquid that is attracted to the poles of a magnet. It is a colloidal liquid made of nanoscale ferromagnetic or ferrimagnetic particles suspended in a carrier fluid. Each magnetic particle is thoroughly coated with a surfactant to inhibit clumping. Large ferromagnetic particles can be ripped out of the homogeneous colloidal mixture, forming a separate clump of magnetic dust when exposed to strong magnetic fields. The magnetic attraction of tiny nanoparticles is weak enough that the surfactant's Van der Waals force is sufficient to prevent magnetic clumping or agglomeration. Ferrofluids usually do not retain magnetization in the absence of an externally applied field and thus are often classified as "superparamagnets" rather than ferromagnets.

A supercritical fluid (SCF) is any substance at a temperature and pressure above its critical point, where distinct liquid and gas phases do not exist, but below the pressure required to compress it into a solid. It can effuse through porous solids like a gas, overcoming the mass transfer limitations that slow liquid transport through such materials. SCF are superior to gases in their ability to dissolve materials like liquids or solids. Also, near the critical point, small changes in pressure or temperature result in large changes in density, allowing many properties of a supercritical fluid to be "fine-tuned".

<span class="mw-page-title-main">Mathmos</span>

Mathmos Limited is a British company that sells lighting products, most famously the lava lamp invented by its founder Edward Craven Walker. It is headquartered in its factory in Poole, Dorset.

A coolant is a substance, typically liquid, that is used to reduce or regulate the temperature of a system. An ideal coolant has high thermal capacity, low viscosity, is low-cost, non-toxic, chemically inert and neither causes nor promotes corrosion of the cooling system. Some applications also require the coolant to be an electrical insulator.

<span class="mw-page-title-main">Ultrasonic cleaning</span> Method of cleaning using ultrasound

Ultrasonic cleaning is a process that uses ultrasound to agitate a fluid, with a cleaning effect. Ultrasonic cleaners come in a variety of sizes, from small desktop units with an internal volume of less than 0.5 litres (0.13 US gal), to large industrial units with volumes approaching 1,000 litres.

<span class="mw-page-title-main">Explosive eruption</span> Type of volcanic eruption in which lava is violently expelled

In volcanology, an explosive eruption is a volcanic eruption of the most violent type. A notable example is the 1980 eruption of Mount St. Helens. Such eruptions result when sufficient gas has dissolved under pressure within a viscous magma such that expelled lava violently froths into volcanic ash when pressure is suddenly lowered at the vent. Sometimes a lava plug will block the conduit to the summit, and when this occurs, eruptions are more violent. Explosive eruptions can expel as much as 1,000 kg (2,200 lb) per second of rocks, dust, gas and pyroclastic material, averaged over the duration of eruption, that travels at several hundred meters per second as high as 20 km (12 mi) into the atmosphere. This cloud may subsequently collapse, creating a fast-moving pyroclastic flow of hot volcanic matter.

Edward Craven Walker was a British inventor, who invented the psychedelic Astro lamp, also known as the lava lamp.

<span class="mw-page-title-main">Fire extinguisher</span> Active fire protection device

A fire extinguisher is a handheld active fire protection device usually filled with a dry or wet chemical used to extinguish or control small fires, often in emergencies. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user, or otherwise requires the equipment, personnel, resources or expertise of a fire brigade. Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent that can be discharged to extinguish a fire. Fire extinguishers manufactured with non-cylindrical pressure vessels also exist but are less common.

<span class="mw-page-title-main">Defoamer</span> Chemical additive that reduces and hinders the formation of foam in liquids

A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Strictly speaking, defoamers eliminate existing foam and anti-foamers prevent the formation of further foam. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break a foam already formed.

The liquid droplet radiator (LDR) or previously termed liquid droplet stream radiator is a proposed lightweight radiator for the dissipation of waste heat generated by power plants, propulsion or spacecraft systems in space.

A thermogravitational cycle is a reversible thermodynamic cycle using the gravitational works of weight and buoyancy to respectively compress and expand a working fluid.

References

  1. McCleary, John Bassett (2004). Hippie Dictionary: A Cultural Encyclopedia of the 1960s and 1970s (Revised and Expanded ed.). Ten Speed Press. p. 299. ISBN   978-1580085472. The oil, heated by electricity, produces bubbles that slowly ascend through the colored liquid, creating a hypnotic display which is amusing to folks high on mind-expanding drugs.
  2. Halperin, Shirley; Bloom, Steve (2008). Pot Culture: The A-Z Guide to Stoner Language and Life. Abrams Image. ISBN   978-0810994409. Hippie accessory invented by Edward Craven Walker in England in 1963, [...] Stoners stare at these blobs for hours at a time, a practice known as 'spacing out.'
  3. 1 2 3 4 U.S. patent 3,387,396 DISPLAY DEVICE, Smith David George, Mar. 4, 1965 P. 2, line 30
  4. "Toxicological Review of Carbon Tetrachloride" (PDF). US Environmental Protection Agency. March 2010. EPA/635/R-08/005F
  5. Carmen Drahl. "Lava Lamps - A density lesson inspired the Woodstock generation". Chemical & Engineering News.
  6. Starr, Michelle. "Ferrofluid Makes the Lava Lamp Cool Again". cnet.com. Retrieved 2015-11-23.
  7. Abigail Tucker (March 2013). "The History of the Lava Lamp: At 50, the legendary relic of the college dorm room is still groovy after all these years". Smithsonian magazine. Archived from the original on November 3, 2013. Retrieved February 28, 2013.
  8. "The History of the Astro Lamp - Designs by Donald Dunnet | The Origins of the lava lamp". www.imovatedesign.co.uk. Retrieved 2023-10-20.
  9. "Vintage Lava Lamps | Collectors Weekly". collectorsweekly.com.
  10. Capital, Talon Merchant. "Talon Merchant Capital Acquires Lava World International Makers of the 'Lava Lamp'". www.prnewswire.com. Retrieved 2017-11-13.
  11. "Schylling Acquires Lava Brand". 5 January 2018.
  12. "City Capital Advisors completes sale of Lifespan Brands™ to Schylling Inc. and Escali Inc". 2 January 2018 via City Capitol Advisors.
  13. "History of Mathmos and the original lava lamp". www.mathmos.com.
  14. Bachelor, Lisa (15 October 2023). "'Ingrained in the fabric of British society': the iconic lava lamp turns 60". The Observer. Retrieved 16 October 2023.
  15. "Lava lamps: Still bubbling at 50". BBC News. 29 August 2013.

Further reading