Leander (clipper)

Last updated

Leanderclippersfpl.jpg
Leander
History
Civil Ensign of the United Kingdom.svgUnited Kingdom
OwnerJoseph Somes, Merchant Shipping Co, London
BuilderJ G Lawrie of Glasgow
Launched1867
AcquiredR. Anderson of London, Ross & Company
Flag of Oman.svgOman
OwnerSeyed Youssouf bin Ahmed Zuwawee
Acquired1895
RenamedNusrool Mujeed
FateBroken up in 1901
General characteristics
Tonnage
Length215.5 ft (65.7 m) [1]
Beam35.2 ft (10.7 m) [1]
Depth20.7 ft (6.3 m) [1]
Sail plan Full-rigged ship, re-rigged as barque in 1890s
NotesBritish Reg. No. 56878. Signal, HSGM [2]

Leander was a composite built clipper ship. She was designed by Bernard Waymouth, and built in 1867 by J G Lawrie of Glasgow for Joseph Somes. She had a particularly extreme hull shape, with a coefficient of under-deck tonnage of 0.54, a very low figure. She was at her best in light winds and performed well to windward or in a head sea. Being somewhat tender if pressed in heavy weather, she had to carry so much ballast that she was down to her marks before being fully laden. [1]

Contents

Ship history

Before 1871, Leander sailed between London and the Far East (China) and later from China to New York City. She was in the tea trade until 1879. Re-rigged as a barque in the 1890s, the ship was sold to R. Anderson of London, then to Ross & Company. Her last owner was Seyed Youssouf bin Ahmed Zuwawee of Oman and was renamed Nusrool Mujeed in 1895 and broken up in 1901.

Related Research Articles

<span class="mw-page-title-main">Clipper</span> Very fast sailing ship of the 19th century

A clipper was a type of mid-19th-century merchant sailing vessel, designed for speed. Clippers were generally narrow for their length, small by later 19th-century standards, could carry limited bulk freight, and had a large total sail area. "Clipper" does not refer to a specific sailplan; clippers may be schooners, brigs, brigantines, etc., as well as full-rigged ships. Clippers were mostly constructed in British and American shipyards, although France, Brazil, the Netherlands, and other nations also produced some. Clippers sailed all over the world, primarily on the trade routes between the United Kingdom and China, in transatlantic trade, and on the New York-to-San Francisco route around Cape Horn during the California Gold Rush. Dutch clippers were built beginning in the 1850s for the tea trade and passenger service to Java.

<i>Thermopylae</i> (clipper) British composite clipper ship built in 1868

Thermopylae was an extreme composite clipper ship built in 1868 by Walter Hood & Co of Aberdeen, to the design of Bernard Waymouth of London. Designed for the China tea trade, she set a speed record on her maiden voyage to Melbourne of 63 days, still the fastest trip under sail.

<i>Ariel</i> (clipper)

Ariel was a clipper ship famous for making fast voyages between China and England in the late 1860s. She is most famous for almost winning The Great Tea Race of 1866, an unofficial race between Fuzhou, China and London with the first tea crop of the 1866 season.

<i>Lothair</i> (clipper) British clipper ship

Lothair was a British clipper ship built by William Walker and launched in Rotherhithe, London, on 2 July 1870. After many years of service as a tea clipper, she was operated by merchants in Italy and Peru before being lost in 1910.

<i>Taitsing</i> (clipper)

Taitsing was a famous British tea clipper.

<i>Sir Lancelot</i> (clipper)

Sir Lancelot was a clipper ship which sailed in the China trade and the India-Mauritius trade.

<i>Lammermuir</i> (1856 clipper)

Lammermuir, named for the Lammermuir Hills, was a tea clipper designed by William Pile. She was the first clipper owned by Jock Willis Shipping Line. She was a fast sailer, being the second ship home in the 1858-59 tea season. She was a favourite of John Willis senior.

<i>Challenger</i> (clipper)

Challenger was a wooden clipper ship built in 1852 by Richard & Henry Green, in their Blackwall Yard for Hugh Hamilton Lindsay, London. She was the 291st ship built by the yard and was a remarkable departure from the previous ships produced. In 1850 the American clipper ship Oriental visited West India Docks, the largest clipper ship to visit London and the Admiralty was given permission to take her lines, and this was done by Messrs Waymouth and Cornish, both Lloyd's Surveyors, in the dry dock at Green's Yard in Blackwell. This is probably the reason that it was said that Challenger's design was inspired by and had a close resemblance to the Oriental's.

USS <i>Nightingale</i> (1851) Gunboat of the United States Navy

USS Nightingale was originally the tea clipper and slave ship Nightingale, launched in 1851. USS Saratoga captured her off Africa in 1861; the United States Navy then purchased her.

<span class="mw-page-title-main">Great Tea Race of 1866</span>

In the middle third of the 19th century, the clippers which carried cargoes of tea from China to Britain would compete in informal races to be first ship to dock in London with the new crop of each season. The Great Tea Race of 1866 was keenly followed in the press, with an extremely close finish. Taeping docked 28 minutes before Ariel - after a passage of more than 14,000 miles. Ariel had been ahead when the ships were taken in tow by steam tugs off Deal, but after waiting for the tide at Gravesend the deciding factor was the height of tide at which one could enter the different docks used by each ship. The third finisher, Serica, docked an hour and 15 minutes after Ariel. These three ships had left China on the same tide and arrived at London 99 days later to dock on the same tide. The next to arrive, 28 hours later, was Fiery Cross, followed, the next day, by Taitsing.

The Serica was a clipper built in 1863 by Robert Steele & Co., at Greenock on the south bank of the Clyde, Scotland, for James Findlay. She was the last-but-one wooden clipper built by Steele before the yard went over to building composite clippers.

<i>Fiery Cross</i> (clipper) British tea clipper

Fiery Cross was a famous British tea clipper which sailed in the Great Tea Race of 1866. She was the first ship home in the tea seasons of 1861, 1862, 1863, and 1865.

Flying Spur was a British tea clipper, built of teak and greenheart in 1860.

<i>Lahloo</i> (clipper)

Lahloo was a British tea clipper known for winning the Tea Race of 1870, and finishing second in the Tea Race of 1871. She sailed from Fuzhou to London with over a million pounds of tea in 1868.

<i>Lord of the Isles</i> (clipper)

Lord of the Isles was the first iron-hulled tea clipper, built in Greenock in 1853. She served in the tea trade until 1862, and also made voyages to Australia. She is known for a record passage between Greenock and Shanghai, and for her close finish in the 1856 Tea Race from China to England, docking in London just ten minutes before Maury. This race was the basis for the plot of a 1927 movie by Cecil B. DeMille The Yankee Clipper.

<i>Stornoway</i> (clipper)

Stornoway was a British tea clipper built by Alexander Hall and Sons in Aberdeen, Scotland in 1850. She was a further development by Hall on the clippers built in Aberdeen in 1848, being larger and more obviously suited to deep sea service. She was ordered by Jardine Matheson specifically for the tea trade. In the late 1840s, tea was available earlier in the season in China, so the first ships to load had to beat to windward against the north-east monsoon to get across the China Sea. The details of the hull shape designed by Hall had this requirement in mind.

<i>Windhover</i> (clipper ship)

Windhover was a British tea clipper built in the closing years of construction of this sort of ship. She measured 847 tons NRT. Like the majority of the tea clippers built in the second half of the 1860s, she was of composite construction. She was built by Connell and Co, Glasgow, Scotland in 1868.

SS <i>Agamemnon</i> (1865) Iron-hulled steamship with more efficient engine

SS Agamemnon was one of the first successful long-distance merchant steamships. She was built in 1865 to trade between Britain and China, and competed with tea clippers before and after the opening of the Suez Canal in 1869. She brought together three improvements in steamship design: higher boiler pressure, an efficient and compact compound steam engine, and a hull form with modest power requirements.

Kaisow, a composite clipper, was built by Robert Steele & Company at Greenock and launched on 19 November 1868.

<i>Wylo</i> (clipper) Scottish composite clipper

Wylo a composite clipper was built by Robert Steele & Company, Greenock, and launched on 15 April 1869. Robert Steele & Company also built the famous clippers Ariel and Taeping who took part in the great tea race of 1866, and Sir Lancelot another renown clipper ship.

References

  1. 1 2 3 4 5 MacGregor, David R. (1983). The Tea Clippers, Their History and Development 1833-1875. Conway Maritime Press Limited. pp. 180–182. ISBN   0-85177-256-0.
  2. Bruzelius, Lars (19 August 1998). "Clipper Ships: Leander (1867)". Leander. The Maritime History Virtual Archives. Retrieved 8 June 2010.
The lines of Leander with stern as originally designed The lines of Leander with stern as originally designed.jpg
The lines of Leander with stern as originally designed