Lewis and Clark River Bridge

Last updated
Lewis and Clark River Bridge
Lewis and Clark Bridge Astoria OR HABS1.jpg
Coordinates 46°09′08″N123°51′34″W / 46.15229°N 123.85937°W / 46.15229; -123.85937
CarriesBusiness plate.svg
US 101.svg
US 101 Bus.
Crosses Lewis and Clark River
Localenear Astoria, Oregon
Maintained by Oregon DOT
Characteristics
DesignSingle-leaf bascule
Total length828 feet (252 m)
Longest span112 feet (34 m)
History
Opened1925
Location
Lewis and Clark River Bridge

The Lewis and Clark River Bridge is a bascule bridge that spans the Lewis and Clark River on U.S. Route 101 Business (a section originally part of U.S. Route 101) in Clatsop County, Oregon. It was designed by Conde McCullough [1] and opened in 1925. [2] It was built to replace an earlier bridge at the same location, [3] a swing-span bridge constructed around 1910.

Contents

The total length of the bridge is 828 feet (252 m), and the length of the bascule main span is 112 ft (34 m). The approach spans consist of a total of 48 timber pile and stringer spans. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Multnomah Falls</span> Waterfall in Oregon, U.S.

Multnomah Falls is a waterfall located on Multnomah Creek in the Columbia River Gorge, east of Troutdale, between Corbett and Dodson, Oregon, United States. The waterfall is accessible from the Historic Columbia River Highway and Interstate 84. Spanning two tiers on basalt cliffs, it is the tallest waterfall in the state of Oregon at 620 ft (189 m) in height. The Multnomah Creek Bridge, built in 1914, crosses below the falls, and is listed on the National Register of Historic Places.

<span class="mw-page-title-main">Historic Columbia River Highway</span> Highway in Oregon, USA

The Historic Columbia River Highway is an approximately 75-mile-long (121 km) scenic highway in the U.S. state of Oregon between Troutdale and The Dalles, built through the Columbia River Gorge between 1913 and 1922. As the first planned scenic roadway in the United States, it has been recognized in numerous ways, including being listed on the National Register of Historic Places, being designated as a National Historic Landmark by the U.S. Secretary of the Interior, being designated as a National Historic Civil Engineering Landmark by the American Society of Civil Engineers, and being considered a "destination unto itself" as an All-American Road by the U.S. Secretary of Transportation. The historic roadway was bypassed by the present Columbia River Highway No. 2 from the 1930s to the 1950s, leaving behind the old two-lane road. The road is now mostly owned and maintained by the state through the Oregon Department of Transportation as the Historic Columbia River Highway No. 100 or the Oregon Parks and Recreation Department as the Historic Columbia River Highway State Trail.

<span class="mw-page-title-main">Burnside Bridge</span> Bridge in Portland, Oregon

The Burnside Bridge is a 1926-built bascule bridge that spans the Willamette River in Portland, Oregon, United States, carrying Burnside Street. It is the second bridge at the same site to carry that name. It was added to the National Register of Historic Places in November 2012.

<span class="mw-page-title-main">Broadway Bridge (Portland, Oregon)</span> Bridge in Portland, Oregon

The Broadway Bridge is a Rall-type bascule bridge spanning the Willamette River in Portland, Oregon, United States, built in 1913. It was Portland's first bascule bridge, and it continues to hold the distinction of being the longest span of its bascule design type in the world. It was added to the National Register of Historic Places in November 2012.

<span class="mw-page-title-main">Astoria–Megler Bridge</span> Bridge in Oregon and Washington, U.S.

The Astoria–Megler Bridge is a steel cantilever through truss bridge in the Pacific Northwest region of the United States that spans the lower Columbia River. It carries a section of U.S. Route 101 from Astoria, Oregon, to Point Ellice near Megler, Washington. Opened in 1966, it is the longest continuous truss bridge in North America.

<span class="mw-page-title-main">Conde McCullough Memorial Bridge</span> Bridge in North Bend, Oregon

The Conde B. McCullough Memorial Bridge, is a cantilever bridge that spans the Coos Bay on U.S. Route 101 near North Bend, Oregon. When completed in 1936 it was named the North Bend Bridge. In 1947 it was renamed in honor of Conde B. McCullough who died May 5, 1946. This and 10 other major bridges on the Oregon Coast Highway were designed under his supervision.

<span class="mw-page-title-main">Yaquina Bay Bridge</span> Bridge in Newport, Oregon

The Yaquina Bay Bridge is an arch bridge that spans Yaquina Bay south of Newport, Oregon. It is one of the most recognizable of the U.S. Route 101 bridges designed by Conde McCullough and one of eleven major bridges on the Oregon Coast Highway designed by him. It superseded the last ferry crossing on the highway.

<span class="mw-page-title-main">Siuslaw River Bridge</span> Bridge in Florence, Oregon

The Siuslaw River Bridge is a bascule bridge that spans the Siuslaw River on U.S. Route 101 in Florence, Oregon. It was designed by Conde McCullough, built by the Mercer-Fraser Company of Eureka, California, and funded by the Federal Emergency Administration of Public Works. It opened in 1936.

<span class="mw-page-title-main">Big Creek Bridge (Oregon)</span> United States historic place

The Big Creek Bridge is a bowstring arch bridge that spans Big Creek on U.S. Route 101 in Lane County, Oregon. It was designed by Conde McCullough and opened in 1931.

<span class="mw-page-title-main">Umpqua River Bridge</span> Bridge in Reedsport, Oregon

The Umpqua River Bridge is a swing-span bridge that spans the Umpqua River in Reedsport, Oregon. It consists of a central swing span flanked by two reinforced concrete arches on each end. The swing span was necessary to accommodate tall sailing vessels which were common on the Umpqua River. The final cost of the bridge was $510,500.

<span class="mw-page-title-main">Conde McCullough</span> American architect

Conde Balcom McCullough was an American civil engineer who is primarily known for designing many of Oregon's coastal bridges on U.S. Route 101. The native of South Dakota worked for the Oregon Department of Transportation from 1919 to 1935 and 1937 until he died in 1946. McCullough also was a professor at Oregon State University.

<span class="mw-page-title-main">U.S. Route 101 in Oregon</span> Section of U.S. Highway in Oregon, United States

U.S. Route 101 (US 101), is a major north–south U.S. Highway in Oregon that runs through the state along the western Oregon coastline near the Pacific Ocean. It runs from the California border, south of Brookings, to the Washington state line on the Columbia River, between Astoria, Oregon, and Megler, Washington.

<span class="mw-page-title-main">Crooked River High Bridge</span> Bridge in Jefferson County, Oregon

The Crooked River High Bridge is a steel arch bridge that spans the Crooked River gorge in Jefferson County, Oregon. The bridge was designed by Conde McCullough and was completed in 1926. Shortly after its completion, Oregon State Highway Division created the Peter Skene Ogden Park just to the south of the bridge.

<span class="mw-page-title-main">Cape Creek Bridge</span> United States historic place

Cape Creek Bridge is an arch bridge that spans Cape Creek in Lane County, Oregon, United States. The bridge carries U.S. Route 101. Opened in 1932, it was designed by noted bridge engineer Conde McCullough and built of reinforced concrete by John K. Holt. The total length of the bridge is 619 feet (189 m), with a main span of 220 feet (67 m). The bridge resembles a Roman aqueduct, with a single parabolic arch that spans half its length. It was listed as Cape Creek Bridge No. 01113 on the National Register of Historic Places in 2005, as part of the C. B. McCullough Major Oregon Coast Highway Bridges MPS.

<span class="mw-page-title-main">Isaac Lee Patterson Bridge</span> Bridge in Oregon to Wedderburn, Oregon

The Isaac Lee Patterson Bridge, also known as the Rogue River Bridge and the Isaac Lee Patterson Memorial Bridge, is a concrete arch bridge that spans the Rogue River in Curry County, Oregon. The bridge was constructed by the Mercer Fraser Company of Eureka, California. The bridge carries U.S. Route 101 across the river, near the point where the river empties into the Pacific Ocean, and connects the towns of Gold Beach and Wedderburn. A bridge with strong Art Deco influences, the Isaac Lee Patterson Bridge is a prominent example of the designs of the Oregon bridge designer and highway engineer Conde McCullough. It was designated a National Historic Civil Engineering Landmark by the American Society of Civil Engineers in 1982. It is part of a series of notable bridges designed by McCullough for the Oregon Coast Highway in the 1930s. It was placed on the National Register of Historic Places in 2005.

<span class="mw-page-title-main">Ellsworth Street Bridge</span> Bridge in Albany, Oregon

The Ellsworth Street Bridge is a highway bridge that crosses the Willamette River in Albany, Oregon, United States. Built in 1925, the two-lane structure carries U.S. Route 20 eastbound traffic, with the adjacent Lyon Street Bridge carrying westbound traffic. The 1,090-foot-long (330 m) steel truss bridge was designed by Conde McCullough and opened in 1926.

<span class="mw-page-title-main">Wilson River Bridge</span> United States historic place

Wilson River Bridge, also known as Wilson River Bridge at Tillamook or Wilson River Bridge No. 01499, is a bridge near Tillamook, Oregon, United States. The 1931 bridge was designed by Conde McCullough in the Classical Revival and Art Deco styles. It covers a span of 180 feet (55 m) and brings coastal U.S. Route 101 (US 101) over the Wilson River.

<span class="mw-page-title-main">Ten Mile Creek Bridge (Oregon)</span> United States historic place

Ten Mile Creek Bridge is a Conde McCullough-designed bridge near Yachats in Lane County in the U.S. state of Oregon. It was listed on the National Register of Historic Places in 2005.

<span class="mw-page-title-main">Old Youngs Bay Bridge</span> Bridge in Astoria, Oregon

The Old Youngs Bay Bridge is a bascule bridge across Youngs Bay in Astoria, Oregon, completed in 1921. Conde McCullough was responsible for designing this bridge, his first for Oregon.

<span class="mw-page-title-main">Rocky Creek Bridge No. 01089</span> United States historic place

Rocky Creek Bridge No. 01089, also known as Ben Jones Bridge, is a concrete highway bridge spanning Rocky Creek along the Pacific Ocean coast of the U.S. state of Oregon. The bridge crosses a gorge near the creek's mouth, about 2 miles (3 km) south of Depoe Bay in Lincoln County. Built in 1927, the bridge originally carried U.S. Route 101 over the creek. After a stretch of the highway was relocated to make it straighter, the abandoned piece of the old highway became Otter Crest Loop Road, a local road west of the new highway.

References

  1. Hadlow (2001).
  2. "New Span to Be Opened" (March 7, 1925). The Morning Oregonian (Portland), p. 1.
  3. "About $11,000,000 Spent on Highways" (and section heading: "Bridges Are Built"). (December 9, 1923). The Sunday Oregonian , p. 13.
  4. Hadlow (2001), p. 141.

Bibliography