Linois-class cruiser

Last updated

Galilee2-Bougault.jpg
Galilée at anchor sometime before 1909
Class overview
NameLinois class
Builders
OperatorsCivil and Naval Ensign of France.svg  French Navy
Preceded by Friant class
Succeeded by Descartes class
Built1892–1898
In commission1895–1920
Completed3
Retired3
General characteristics (data for Linois)
Type Protected cruiser
Displacement2,285 to 2,318 long tons (2,322 to 2,355  t)
Length98 m (321 ft 6 in) (o/a)
Beam10.62 m (34 ft 10 in)
Draft5.44 m (17 ft 10 in)
Installed power
Propulsion
Speed20.5 knots (38.0 km/h; 23.6 mph)
Complement250–269
Armament
Armor

The Linois class comprised three protected cruisers of the French Navy built in the early 1890s; the three ships were Linois, Galilée, and Lavoisier. They were ordered as part of a naval construction program directed at France's rivals, Italy and Germany, particularly after Italy made progress in modernizing its own fleet. The plan was also intended to remedy a deficiency in cruisers that had been revealed during training exercises in the 1880s. As such, the Linois-class cruisers were intended to operate as fleet scouts and in the French colonial empire. The ships were armed with a main battery of four 138.6 mm (5.46 in) guns supported by two 100 mm (3.9 in) guns and they had a top speed of 20.5 knots (38.0 km/h; 23.6 mph).

Contents

All three members of the class served with the Mediterranean Squadron upon entering service in the mid-to-late 1890s. During this period, they were primarily occupied with peacetime training maneuvers. Lavoisier was transferred to the Newfoundland and Iceland Naval Division in 1903, where she patrolled fisheries for the next decade. After uneventful careers, Linois and Galilée were discarded in 1910 and 1911, respectively, having spent less than fifteen years in service. Lavoisier was the only member of the class still in commission at the start of World War I in August 1914, and she was used to patrol for German warships and submarines in various secondary theaters, ending the war in the Syrian Naval Division, where she remained through the end of the war. She was ultimately struck from the naval register in 1920 and thereafter broken up.

Design

The earlier cruiser Coetlogon of the Forbin class, which provided the basis for the Linois design French cruiser Coetlogon NH 66064.jpg
The earlier cruiser Coëtlogon of the Forbin class, which provided the basis for the Linois design

In the late 1880s, the Italian Regia Marina (Royal Navy) accelerated construction of ships for its fleet and reorganized the most modern ironclad battleships—the Duilio and Italia classes—into a fast squadron suitable for offensive operations. These developments provoked a strong response in the French press. The Budget Committee in the French Chamber of Deputies began to press for a "two-power standard" in 1888, which would see the French fleet enlarged to equal the combined Italian and German fleets, then France's two main rivals on the continent. This initially came to nothing, as the supporters of the Jeune École doctrine called for a fleet largely based on squadrons of torpedo boats to defend the French coasts rather than an expensive fleet of ironclads. This view had significant support in the Chamber of Deputies. [1]

The next year, a war scare with Italy led to further outcry to strengthen the fleet. To compound matters, the visit of a German squadron of four ironclads to Italy confirmed French concerns of a combined Italo-German fleet that would dramatically outnumber their own. Training exercises held in France that year demonstrated that the slower French fleet would be unable to prevent the faster Italian squadron from bombarding the French coast at will, in part because it lacked enough cruisers (and doctrine to use them) to scout for the enemy ships. [2]

To correct the weaknesses of the French fleet, on 22 November 1890, the Superior Council authorized a new construction program directed not at simple parity with the Italian and German fleets, but numerical superiority. In addition to twenty-four new battleships, a total of seventy cruisers were to be built for use in home waters and overseas in the French colonial empire. The Linois class were ordered as part of the program, [2] [3] and their design was based on the earlier Forbin class, albeit with increased freeboard. [4] [5]

General characteristics and machinery

Linois early in her career, before 1898 French cruiser Linois at anchor.jpg
Linois early in her career, before 1898

The ships of the Linois class varied slightly in dimensions; Linois was 98 m (321 ft 6 in) long overall, while Lavoisier and Galilée were 100.63 m (330 ft 2 in) long. Linois and Lavoisier had a beam of 10.62 m (34 ft 10 in), while Galilée was slightly wider, at 10.97 m (36 ft). All three ships had a draft of 5.44 m (17 ft 10 in). They displaced 2,285 to 2,318 long tons (2,322 to 2,355  t ). Like most French warships of the period, the Linois-class cruisers' hulls had a pronounced ram bow and tumblehome shape. They also had a short forecastle deck , and the hulls included a double bottom. The ships had a minimal superstructure, with a small conning tower and a bridge forward and a smaller, secondary bridge aft. They were fitted with pole masts with spotting tops for observation and signaling purposes. Their crew varied over the course of their careers, amounting to 250–269 officers and enlisted men. [4] [6]

The ships' propulsion system consisted of a pair of vertical triple-expansion steam engines driving two screw propellers. Steam was provided by six coal-burning fire-tube boilers for Linois, while the other two vessels received sixteen coal-fired, Belleville-type water-tube boilers. All of the ships' boiler rooms were ducted into two funnels. Their machinery was rated to produce 6,800 indicated horsepower (5,100  kW ) for a top speed of 20.5 knots (38.0 km/h; 23.6 mph). Coal storage amounted to 400 long tons (410 t) for Linois and 339 long tons (344 t) for Lavoisier and Galilée. [4] They had a cruising radius of 3,000 nautical miles (5,600 km; 3,500 mi) at 10 knots (19 km/h; 12 mph) and 600 nmi (1,100 km; 690 mi) at 20.5 knots. [7]

Armament and armor

Plan and profile drawing of the Linois class French cruiser Linois plan and profile.jpg
Plan and profile drawing of the Linois class

The ships were armed with a main battery of four 138.6 mm (5.5 in) 45-caliber guns in individual pivot mounts with gun shields, all in sponsons located amidships with two guns per broadside. [4] These were probably the M1893 variant installed without trunnions. They fired a variety of shells, including solid, 30 kg (66 lb) cast iron projectiles, and 35 kg (77 lb) explosive armor-piercing (AP) and semi-armor-piercing (SAP) shells with a muzzle velocity of 730 to 770 m/s (2,400 to 2,500 ft/s). [8] The forward pair were placed just abaft the conning tower and the after pair were between the aft funnel and the main mast. The main battery was supported by a secondary battery that consisted of a pair of 100 mm (3.9 in) Modèle 1891 guns, one at the bow and the other at the stern, which were also fitted with shields. [4] The guns fired 14 kg (31 lb) cast iron and 16 kg (35 lb) AP shells with a muzzle velocity of 710 to 740 m/s (2,300 to 2,400 ft/s). [9]

For close-range defense against torpedo boats, they carried eight 47 mm (1.9 in) 3-pounder Hotchkiss guns, two 37 mm (1.5 in) guns, and four 37 mm Hotchkiss revolver cannon. These were carried in individual pivot mounts and they were distributed along the length of the ship to provide wide fields of fire. All three ships were also armed with four 450 mm (17.7 in) torpedo tubes in their hull above the waterline. The torpedoes were the M1892 variant, which carried a 75 kg (165 lb) warhead and had a range of 800 m (2,600 ft) at a speed of 27.5 knots (50.9 km/h; 31.6 mph). [4] [10] Linois and Galilée had provisions to carry up to 120  naval mines. [4]

Armor protection consisted of a curved armor deck that was 40 mm (1.6 in) thick. Above the deck at the sides, a cofferdam filled with cellulose was intended to contain flooding from damage below the waterline. Below the main deck, a thin splinter deck covered the propulsion machinery spaces to protect them from shell fragments. Their forward conning towers had 138 mm (5 in) thick plating on the sides. The gun shields for the main battery were 75 mm (3 in) thick, while the secondary guns received 50 mm (2 in) thick shields. [4]

Construction

Linois early in her career French cruiser Linois.jpg
Linois early in her career
Construction data
Name Laid down [4] Launched [11] Completed [4] Shipyard [4]
Linois August 189230 January 18941895 Société Nouvelle des Forges et Chantiers de la Méditerranée , La Seyne-sur-Mer
Galilée 189328 April 1896September 1897 [12] Arsenal de Rochefort , Rochefort
Lavoisier January 1895April 1897April 1898Arsenal de Rochefort, Rochefort

Service history

Postcard depicting Lavoisier underway Lavoisier Marius Bar.jpg
Postcard depicting Lavoisier underway

Linois was assigned to the Mediterranean Squadron in 1896, [13] where she was joined by Galilée and Lavoisier in 1898. The three ships served as part of the cruiser force of the main French battle fleet. They took part in training exercises during this period, which sometimes included joint maneuvers with the Northern Squadron, along with shooting practice and naval reviews. [14] [15] [16] Linois was involved in a show of force meant to intimidate the Ottoman Empire in 1902 during a period of tension with France. [17] Lavoisier was transferred to the Newfoundland and Iceland Naval Division in 1903, where she patrolled fishing grounds off the coast of Newfoundland. [18] Linois remained in service with the Mediterranean Squadron through 1905. [19] During a review in 1909, Galilée hosted President Armand Fallières and Tsar Nicholas II of Russia during the latter's visit to France. [20] Linois was struck from the naval register in 1910, thereafter being broken up for scrap. Galilée was discarded the following year. [11]

Lavoisier was attached to the 2nd Light Squadron in the English Channel at the start of World War I in August 1914, but she saw no action there. She was transferred to the eastern Mediterranean in December 1915, operated briefly with the main French fleet, and then conducted anti-submarine patrols in the western Mediterranean. In 1917, she returned to the Moroccan Naval Division, and the following year, she was reassigned to the Syrian Naval Division, where she remained through the end of the war. In April 1919, Lavoisier was detached from the Syrian Division; decommissioned for the last time in August, she was struck from the naval register in early 1920 and sold to ship breakers. [21]

Citations

  1. Ropp, p. 195.
  2. 1 2 Ropp, pp. 195–197.
  3. Campbell, pp. 310–311.
  4. 1 2 3 4 5 6 7 8 9 10 11 Campbell, p. 310.
  5. Dorn & Drake, p. 49.
  6. Dorn & Drake, p. 50.
  7. France, p. 33.
  8. Friedman, p. 224.
  9. Friedman, p. 225.
  10. Friedman, p. 345.
  11. 1 2 Smigielski, p. 193.
  12. Service Performed, p. 299.
  13. Thursfield, pp. 164–167.
  14. Brassey 1899, p. 71.
  15. Leyland, p. 64.
  16. Meirat, p. 21.
  17. Jordan & Caresse, pp. 218–219.
  18. Meirat, pp. 21–22.
  19. Brassey 1905, p. 42.
  20. Jordan & Caresse, p. 232.
  21. Meirat, pp. 22–23.

Related Research Articles

French cruiser <i>Châteaurenault</i> (1898) Protected cruiser of the French Navy

Châteaurenault was a large protected cruiser built for the French Navy in the late 1890s and early 1900s. She was intended to serve as a long-range commerce raider, designed according to the theories of the Jeune École, which favored a strategy of attacking Britain's extensive merchant shipping network instead of engaging in an expensive naval arms race with the Royal Navy. As such, Châteaurenault was built with a relatively light armament of just eight medium-caliber guns, but was given a long cruising range and the appearance of a large passenger liner, which would help her to evade detection while raiding merchant shipping.

French cruiser <i>Lavoisier</i> Protected cruiser of the French Navy

Lavoisier was a protected cruiser of the French Navy built in the 1890s, the third and final member of the Linois class. Ordered as part of a large construction program aimed at countering the fleets of France's rivals, the Linois class was intended for use with France's fleets in home waters and in the French colonial empire. Lavoisier was armed with a main battery of four 138.6 mm (5.5 in) guns, was protected by an armor deck that was 40 mm (1.6 in) thick and she had a top speed of 20.5 knots.

French cruiser <i>DEstrées</i> French protected cruiser of the 1890s

D'Estrées was the lead ship of her class of protected cruisers built for the French Navy in the late 1890s. The class was ordered as part of a construction program directed at strengthening the fleet's cruiser force at a time the country was concerned with the growing naval threat of the Italian and German fleets, and were intended to serve overseas in the French colonial empire. D'Estrées was armed with a main battery of two 138 mm (5.4 in) guns, was protected by an armor deck that was 38 to 43 mm thick, and was capable of steaming at a top speed of up to 20 to 20.5 knots.

<i>DEstrées</i>-class cruiser Protected cruiser class of the French Navy

The D'Estrées class comprised two protected cruisers of the French Navy built in the late 1890s. The two ships were D'Estrées and Infernet, though a third was projected but was canceled before work began. They were ordered during a period of intense debate in the French fleet between officers who favored large armored cruisers and those who preferred smaller vessels more suited to long-distance cruising abroad. The D'Estrées-class cruisers were intended to operate in the French colonial empire. The ships were armed with a main battery of two 138 mm (5.4 in) guns supported by four 100 mm (3.9 in) guns and they had a top speed of 20 to 20.5 knots.

French cruiser <i>Troude</i> Protected cruiser of the French Navy

Troude was a protected cruiser of the French Navy, the lead ship of the Troude class. The class was built as part of a construction program intended to provide scouts for the main battle fleet. They were based on the preceding Forbin class, the primary improvement being the addition of armor to the conning tower. Troude was built in the 1880s and was completed in late 1890. She was armed with a main battery of four 138 mm (5.4 in) guns, protected with an armor deck that was 41 mm (1.6 in) thick, and had a top speed of 20.5 knots.

<i>Friant</i>-class cruiser Protected cruiser class of the French Navy

The Friant class comprised three protected cruisers of the French Navy built in the early 1890s; the three ships were Friant, Bugeaud, and Chasseloup-Laubat. They were ordered as part of a naval construction program directed at France's rivals, Italy and Germany, particularly after Italy made progress in modernizing its own fleet. The plan was also intended to remedy a deficiency in cruisers that had been revealed during training exercises in the 1880s. As such, the Friant-class cruisers were intended to operate as fleet scouts and in the French colonial empire. The ships were armed with a main battery of six 164 mm (6.5 in) guns supported by four 100 mm (3.9 in) guns and they had a top speed of 18.7 knots.

<i>Troude</i>-class cruiser Protected cruiser class of the French Navy

The Troude class was a group of three protected cruisers built for the French Navy in the late 1880s and early 1890s. The class, which was very similar to the preceding Forbin class, comprised Troude, Cosmao and Lalande. They were ordered as part of a fleet program that accorded with the theories of the Jeune École, which proposed a fleet based on cruisers and torpedo boats to defend France. The Troude-class cruisers were intended to serve as flotilla leaders for the torpedo boats, and they were armed with a main battery of four 138 mm (5.4 in) guns.

<i>Forbin</i>-class cruiser Protected cruiser class of the French Navy

The Forbin class was a group of three protected cruisers built for the French Navy in the late 1880s and early 1890s. The class comprised Forbin, Coëtlogon, and Surcouf. They were ordered as part of a fleet program that, in accordance with the theories of the Jeune École, proposed a fleet based on cruisers and torpedo boats to defend France. The Forbin-class cruisers were intended to serve as flotilla leaders for the torpedo boats, and they were armed with a main battery of four 138 mm (5.4 in) guns.

French cruiser <i>Tage</i> Protected cruiser of the French Navy

Tage was a protected cruiser built for the French Navy in the 1880s, the second vessel of that type built for the French fleet. The design was based on the previous cruiser, Sfax, and like that vessel, Tage was intended to be used as a commerce raider to attack merchant shipping. As such, she carried a barque sailing rig to supplement her steam engines for long voyages overseas. Tage was armed with a main battery of eight 164 mm (6.5 in) guns and had a curved armor deck that was 51 to 56 mm thick.

French cruiser <i>Forbin</i> Protected cruiser of the French Navy

Forbin was a protected cruiser, the lead ship of the Forbin class, built in the late 1880s for the French Navy. The class was built as part of a construction program intended to provide scouts for the main battle fleet. They were based on the earlier unprotected cruiser Milan, with the addition of an armor deck to improve their usefulness in battle. They had a high top speed for the time, at around 20 knots, and they carried a main battery of four 138 mm (5.4 in) guns.

French cruiser <i>Surcouf</i> Protected cruiser of the French Navy

Surcouf was the second Forbin-class protected cruiser built for the French Navy in the late 1880s and early 1890s. The Forbin-class cruisers were built as part of a construction program intended to provide scouts for the main battle fleet. They were based on the earlier unprotected cruiser Milan, with the addition of an armor deck to improve their usefulness in battle. They had a high top speed for the time, at around 20 knots, and they carried a main battery of four 138 mm (5.4 in) guns.

French cruiser <i>Lalande</i> Protected cruiser of the French Navy

Lalande was a protected cruiser of the Troude class built for the French Navy in the late 1880s and early 1890s. The class was built as part of a construction program intended to provide scouts for the main battle fleet. They were based on the preceding Forbin class, the primary improvement being the addition of armor to the conning tower. Lalande was built in the 1880s and was completed in late 1890. She was armed with a main battery of four 138 mm (5.4 in) guns, protected with an armor deck that was 41 mm (1.6 in) thick, and had a top speed of 20.5 knots.

French cruiser <i>Cosmao</i> Protected cruiser of the French Navy

Cosmao was the third and final member of the Troude class of protected cruisers built for the French Navy in the late 1880s and early 1890s. The class was built as part of a construction program intended to provide scouts for the main battle fleet. They were based on the preceding Forbin class, the primary improvement being the addition of armor to the conning tower. Cosmao was built in the 1880s and was completed in 1890. She was armed with a main battery of four 138 mm (5.4 in) guns, protected with an armor deck that was 41 mm (1.6 in) thick, and had a top speed of 20.5 knots.

French cruiser <i>Linois</i> (1894) Protected cruiser of the French Navy

Linois was the lead ship of her class of protected cruisers built for the French Navy in the 1890s. The class was ordered as part of a construction program directed at strengthening the fleet's cruiser force. At the time, France was concerned with the growing naval threat of the Italian and German fleets, and the new cruisers were intended to serve with the main fleet, and overseas in the French colonial empire. Linois was armed with a main battery of four 138.6 mm (5.5 in) guns, was protected by an armored deck 40 mm (1.6 in) thick, and had a top speed of 20.5 knots.

French cruiser <i>Galilée</i> Protected cruiser of the French Navy

Galilée was a protected cruiser of the French Navy built in the 1890s; she was the second member of the Linois class, which was ordered as part of a construction program directed at strengthening the fleet's cruiser force. At the time, France was concerned with the growing naval threat of the Italian and German fleets, and the new cruisers were intended to serve with the main fleet, and overseas in the French colonial empire. Galilée was armed with a main battery of four 138.6 mm (5.5 in) guns, was protected by an armor deck that was 40 mm (1.6 in) thick and she had a top speed of 20.5 knots.

French cruiser <i>Friant</i> Protected cruiser of the French Navy

Friant was a protected cruiser of the French Navy built in the 1890s, and the lead ship of the Friant class. Friant and her two sister ships were ordered as part of a major construction program directed against France's Italian and German opponents in the Triple Alliance, and they were intended to serve with the main fleet, and overseas in the French colonial empire. They were armed with a main battery of six 164 mm (6.5 in) guns and had a top speed of 18.7 knots.

French cruiser <i>Descartes</i> Protected cruiser of the French Navy

Descartes was the lead ship of the Descartes class of protected cruisers built for the French Navy in the 1890s. The Descartes-class cruisers were ordered as part of a construction program directed at strengthening the fleet's cruiser force. At the time, France was concerned with the growing naval threat of the Italian and German fleets, and the new cruisers were intended to serve with the main fleet, and overseas in the French colonial empire. Descartes was armed with a main battery of four 164.7 mm (6.5 in) guns, was protected by an armor deck that was 20 to 40 mm thick, and was capable of steaming at a top speed of 19 knots.

French cruiser <i>Du Chayla</i> Protected cruiser of the French Navy

Du Chayla was a protected cruiser built for the French Navy in the 1890s; she was a member of the D'Assas class. The D'Assas-class cruisers were ordered as part of a construction program directed at strengthening the fleet's cruiser force at a time the country was concerned with the growing naval threat of the Italian and German fleets. The new cruisers were intended to serve with the main fleet and overseas in the French colonial empire. Du Chayla was armed with a main battery of six 164 mm (6.5 in) guns, was protected by an armor deck that was 70 to 80 mm thick, and was capable of steaming at a top speed of 20 knots.

French cruiser <i>Cassini</i>

Cassini was the second member of the D'Iberville class of torpedo cruisers built for the French Navy in the 1890s. The class is also sometimes classified as torpedo gunboats or torpedo avisos. The D'Iberville-class ships were a development of earlier torpedo cruisers, with the chief improvement being a significantly higher speed. Cassini was armed with three 450 mm (17.7 in) torpedo tubes and a single 100 mm (3.9 in) gun as her primary offensive armament.

References