MV Agusta 250B

Last updated
MV Agusta 250B
Manufacturer MV Agusta
Also calledMV Agusta 250 Bicilindrica
Production1968-1971
AssemblyCascina Costa, Italy
Engine 247 cc (15 cu in) air-cooled four-stroke OHV parallel twin
Bore / stroke 53 mm × 56 mm (2.1 in × 2.2 in)
Compression ratio 9:1
Top speed135 Km/h (83 mph)
Power 23 bhp (17 kW) @ 7,500 rpm
Transmission Wet, multi-plate clutch, unit construction 5-speed gearbox, chain drive
Frame type Tubular and pressed steel open loop
Suspension Front: telescopic forks
Rear: swinging arm with hydraulic dampers
Brakes Front: 200 mm drum brake
Rear: 200 mm drum brake
Tires Front: 2.75 x 18
Rear: 3.25 x 18
Wheelbase 1,300 mm
DimensionsL: 1,960 mm
W: 620 mm
Weight140 kg (dry)
Footnotes /references
[1] [2] [3] [4] [5]

The MV Agusta 250B (Bicilindrica) was a motorcycle produced by the Italian manufacturer MV Agusta from 1968 to 1971. [3] The motorcycle was first introduced at the 1965 Milan EICMA motorcycle show and was based on the stillborn MV 166 Arno GT. [6] The model was discontinued in 1971 following the introduction of an overbored version, the 350B. [7]

Contents

History

During the 1960s the Italian motorcycle industry was in decline and sales were falling. New machines from the Italian manufacturers were introduced at the 1964 Milan EICMA Show. MV Agusta presented the new twin-cylinder 166 Arno GT. The machine was well received, and Motociclismo magazine described it as one of the only three innovative machines at the show. (The other two being the Laverda 200 Sport and the Ducati 250 Mach.) [6]

Although the machine was a success at the show, MV decided it needed to follow the trend of increasing the capacity of lightweights to 200 or 250 cc. The 166 Arno GT was developed into a 250 and shown at the 1965 show. [6] Although the Arno was a sport machine, the 250 was introduced as more of an everyday machine. [8]

Despite being first shown in 1965, production didn't begin until 1968. During that time the engine was reworked. [6] Initially designated the 250 Bicilindrica, the model name was shortened to 250B in 1969. [8]

The styling of the machine was influenced by the Japanese machines of this time. The tank, with its chrome sides and black rubber knee grips, is very similar to that of the Suzuki T20 Super Six. [8] The styling was shared with the MV 600 four [7] which was introduced in the same year. [9] The machine was available in light blue, black with a red tank or all black. [3]

Sales were not high (1,452 units total) [3] and in 1970 an overbored version, the 350B, was introduced. [10] Production of the 250 stopped the next year. [3]

Arno 166 GT

The Arno 166 GT was fitted with a new design of engine. Only the oil pump and gearbox, which came from the then current 125, were not new components. [6] The wet-sump, OHV, parallel twin engine had a bore and stroke of 46.5 x 49 mm. The barrels and cylinder head were cast in alloy. Breathing through two Dell'Orto MA 15B carburettors, [11] the engine produced 12 bhp (9kW). [6]

The frame followed MV's usual practice of using tubes for the front sections and pressed steel at the rear. Instead of the usual cradle, the frame was an open loop type, with no frame members below the engine. The machine was styled as a sports machine with clip-on handlebars and a humped Radaelli seat. Ceriani forks and Grimeca drum brakes were fitted. [6]

Five engines were built, two for bench testing and three built into bikes for road testing. Top speed was claimed to be 122 km/h (76 mph). [6]

Technical details

The four-stroke parallel twin OHV engine was derived from the stillborn Arno 166 GT, the bore being increased to 53 mm and stroke to 56 mm, giving a 247 cc displacement. Featuring alloy barrels and heads, the cylinders were inclined forward by 20 degrees. Two 22 mm Dell'Orto carburettors fed fuel to the engine, which had a compression ratio of 9:1. Lubrication employed a wet sump. Power output was 23 bhp (17 kW) @ 7,500 rpm. [1]

A geared primary drive took power to the wet, multi-plate clutch. The unit construction gearbox had 5 speeds, and final drive was by chain. [1] [3]

For the chassis, MV's usual single-beam frame in steel tube and sheet metal was used, but with an open loop design. [7] Telescopic forks were used on the front, and rear suspension was by swinging arm and twin shock absorbers. Brakes were drums front and rear and spoked wheels were fitted. [3]

250 B Scrambler

A scrambler version with on-off road configuration was introduced in 1969. [4] The machine had high-level exhausts and high handlebars. [8] It was finished in silver with a red line on the tank. The machine was not well received in Italy and only 52 machines were built before production stopped in 1970. [4]

Related Research Articles

<span class="mw-page-title-main">MV Agusta</span> Italian motorcycle manufacturer and racing team

<span class="mw-page-title-main">MV Agusta F4 series</span> Four-cylinder sport bike

The MV Agusta F4 is an inline four-cylinder sport bike made by MV Agusta from 1999 until 2018. It was the motorcycle that launched the resurrection of the brand in 1998. The F4 was created by motorcycle designer Massimo Tamburini at CRC, following his work on the Ducati 916. The F4 has a single-sided swingarm, large diameter front forks and traditional MV Agusta red and silver livery. The F4 engine is also one of the few production superbikes to have a hemi-spherical cylinder head chamber design with 4 valves per cylinder.

<span class="mw-page-title-main">MV Agusta 350B</span> Type of motorcycle

The MV Agusta 350B (Bicilindrica) was a series of motorcycles produced by the Italian manufacturer MV Agusta from 1970 to 1974. The motorcycle was first introduced at the Milan motorcycle show in 1969. The introduction of the "350" model was intended to bridge the production gap of MV Agusta in the medium-displacement sector and to take advantage of the prestige gained by the dominant GP racers. It was produced in "Sport", "Gran Turismo" and "Scrambler" versions.

<span class="mw-page-title-main">MV Agusta 750 S</span> Motorcycle manufactured by the company MV Agusta from 1970 to 1975

The MV Agusta 750 S also known as the MV Agusta 750 Sport, was a motorcycle manufactured by the MV Agusta company from 1970 to 1975. Production total of this model series was 583 machines.

<span class="mw-page-title-main">MV Agusta 350 Six</span> Type of motorcycle

The MV Agusta 350 6 cilindri was a prototype racing motorcycle built by the Varese company MV Agusta in 1957, for the 350 cc class of the FIM Motorcycle World Championship. The project was resurrected in 1968. Neither version was ever used in a race. The only surviving model is now in the MV Agusta factory museum.

The MV Agusta 250 Monocilindrica Bialbero was a 250 cc factory racer manufactured by the Italian brand MV Agusta from 1956 to 1959. With this machine 15 GPs, 2 Driver Championships and 2 manufacturers World Championships were won.

The MV Agusta 250 Bicilindrica was a 250 cc factory racing motorcycle manufactured by the Italian brand MV Agusta from 1957 to 1961. With this machine 11 GPs, 2 Driver Championships and 2 manufacturers World Championships were won.

<span class="mw-page-title-main">MV Agusta 175 series</span> Series of Italian motorcycles

The MV Agusta 175 were a series of motorcycles produced by the Italian manufacturer MV Agusta from 1953 to 1960. The series included touring, GT, sports and supersports models. There were also two racing variants. Because of the shape of the petrol tank, the sports and supersport models became known as the Disco Volante. The series was MV's best seller.

<span class="mw-page-title-main">MV Agusta 125 Motore Lungo</span> Italian motorcycle

The MV Agusta 125 Motore Lungo, more commonly known as the "carter lungo", was a 125 cc, lightweight two-stroke motorcycle manufactured between 1950 and 1953 by Italian motorcycle manufacturer MV Agusta. The machine was often used in racing.

<span class="mw-page-title-main">MV Agusta 125 Pullman</span> Type of motorcycle

The MV Agusta 125 Pullman was a motorcycle produced by the Italian manufacturer MV Agusta from 1953 to 1956. The model achieved a good sales success, and had the highest production of any machine from MV Agusta. Many brought the bike as the only means of family transport or as a work vehicle. Despite the questionable aesthetics, the Pullman offered a comfortable ride, derived by the driving position, soft suspension and large section tires. This was particularly appreciated by users, so much so that they were imitated by some competitors. 27,000 machines of this model series were produced. The model was also produced under licence in Spain by Avello, where it was marketed as the MV Avello 125 Pullman Turismo.

<span class="mw-page-title-main">MV Agusta Turismo Veloce</span> Italian sport touring motorcycle

The MV Agusta Turismo Veloce is a motorcycle produced by the Italian motorcycle manufacturer MV Agusta. The machine premiered at the 2013 EICMA, but production was delayed due to the financial crisis being experienced by the manufacturer. The motorcycle was first made available to the press for road tests in April 2015.

<span class="mw-page-title-main">MV Agusta Superveloce</span> Italian retro racer styled motorcycle

The MV Agusta Superveloce is a retro racer styled motorcycle produced by the Italian motorcycle manufacturer MV Agusta in 2020. It is described by MV Agusta as "a modern interpretation of the iconic stylistic concept of the MV Agusta. A fusion of vintage and contemporary ensures that the future incorporates the memories of good times gone by".

<span class="mw-page-title-main">MV Agusta Dragster series</span> Series of Italian streetfighter motorcycles

The MV Agusta Dragster is a series of motorcycles produced by the Italian manufacturer MV Agusta. The bike is considered a streetfighter, or muscle bike, and is powered by an 800cc three-cylinder engine. Originally introduced in 2014 as the Brutale Dragster 800, part of the Brutale model lineup, the Dragster range was expanded and offered as its own series.

<span class="mw-page-title-main">MV Agusta 350 Ipotesi</span> Type of motorcycle

The MV Agusta 350 Ipotesi (Hypothesis) was a motorcycle produced by the Italian manufacturer MV Agusta from 1975 to 1977. The machine was conceived by Italian designer Giorgetto Giugiaro and based on the previous 350 B Sport Elettronica model. 1,991 "Sports" and 350 “Turismo” machines were produced.

<span class="mw-page-title-main">MV Agusta 125 Regolarità</span> Motorcycle model

The MV Agusta 125 Regolarità was a dual-sport motorcycle built from 1965 to 1970 by the Italian manufacturer MV Agusta at their Cascina Costa plant. Production was 63 machines, built in 2 batches; 46 in 1965 and 17 in 1969.

<span class="mw-page-title-main">MV Agusta 125 Sport SE</span> Type of motorcycle

The MV Agusta 125 Sport SE was a sport motorcycle built from 1975 to 1977 by the Italian manufacturer MV Agusta. It was one of the last models to be produced by Meccanica Verghera at their Cascina Costa plant.

<span class="mw-page-title-main">MV Agusta 150 Sport RS</span> Type of motorcycle

The MV Agusta 150 Sport RS was a motorcycle produced by the Italian motorcycle MV Agusta in their Cascina Costa plant from 1959 to 1969.

<span class="mw-page-title-main">MV Agusta Raid</span> Type of motorcycle

The MV Agusta Raid was a series of 250 and 300 cc motorcycles manufactured by the MV Agusta company in Cascina Costa, Italy from 1957 to 1961. At the time of introduction, the 250 cc class was considered a large capacity motorcycle.

<span class="mw-page-title-main">Ducati Road 250</span> SOHC motorcycle made by MotoTrans under licence from Ducati

The Ducati Road 250 is a 247 cc (15.1 cu in) single cylinder bevel drive SOHC motorcycle produced by the Spanish manufacturer MotoTrans, who were licensed by Ducati to produce motorcycles under the Ducati brand name and was produced from 1972 to 1977. The model was intended to be a Spanish domestic market version of the 250 Scrambler, although it was also exported to the US in 1972/3.

The Ducati Road 350 is a 340 cc (21 cu in) single cylinder bevel drive SOHC motorcycle produced by the Spanish manufacturer MotoTrans, who were licensed by Ducati to produce motorcycles under the Ducati brand name and was produced from 1973 to 1976. The model was intended to be for the Spanish domestic market although it was also exported to the US in 1973.

References

  1. 1 2 3 "MV Agusta 250 Bicilindrica". www.mv-agusta-club.de (in German). MV Agusta Club Deutschland. Retrieved 3 October 2019.
  2. ↑ "MV Agusta 250 Bicilindrica Scrambler". www.mv-agusta-club.de (in German). MV Agusta Club Deutschland. Retrieved 3 October 2019.
  3. 1 2 3 4 5 6 7 "250 Bicilindrico "B"" (PDF). www.glaagusta.org. Retrieved 2 October 2019.
  4. 1 2 3 "250 Bicilindrico B "Scrambler"" (PDF). www.glaagusta.org. Retrieved 3 October 2019.
  5. ↑ "Classic MV Agusta -". thebikemuseum.com. The Bike Museum. Retrieved 3 October 2019.
  6. 1 2 3 4 5 6 7 8 Pasi, Aberto (16 December 2018). "MV Agusta 166 Arno GT: cilindrata letale". www.motociclismo.it (in Italian). Retrieved 2 October 2019.
  7. 1 2 3 "c.1969 MV Agusta 250B Frame no. MV250B*2110381* Engine no. *2110365*". www.bonhams.com. Bonhams. Retrieved 2 October 2019.
  8. 1 2 3 4 Brown, Roland; Pons, M. Àngels (3 February 2010). "MV Agusta 350 GT (1972)". Motofan (in Spanish). Retrieved 2 October 2019.
  9. ↑ "600 Turismo "4C 6"" (PDF). www.glaagusta.org.
  10. ↑ "350 B "Sport"" (PDF). www.glaagusta.org. Retrieved 2 October 2019.
  11. ↑ "MV Agusta Arno 166 GT". www.mv-agusta-club.de (in German). MV Agusta Club Deutschland. Retrieved 3 October 2019.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.