Marlin Model 336

Last updated

Marlin Model 336
Marlin 336W.png
Marlin 336W in .30-30 Winchester
Type Lever-action rifle
Place of originUnited States
Production history
DesignerL.L. Hepburn, T.R. Robinson Jr.
Designed1948
Manufacturer Marlin Firearms (until 2010), Remington Arms (most recent production) Purchased by Sturm, Ruger & Co. in 2020 (back in production as of 2023)
Produced1948–present
No. built4,000,000+ [1]
Variantscurrently: A, C, CB, CS, D, DL, ER, LTD, LTS, M, Octagon, RC, SDG, SDT, SS, TS, W, XLR,Y, Zane Grey
Specifications
Mass7 lb (3.2 kg) - 8 lb (3.6 kg)
Length38.5 in (98 cm) - 42.5 in (108 cm)
Barrel  length20 in (510 mm) - 24 in (610 mm)

Cartridge Current offerings: (May, 2024)
.30-30 Winchester
No longer offered: (Oct. 01, 2022)
.219 Zipper, .307 Winchester, .35 Remington, .32-40 WCF, .32 Special, .338 Marlin Express, .356 Winchester, .375 Winchester, .38-55 Winchester, .44 Magnum, .410 bore
Model 1895 Chamberings:
.45-70, .444 Marlin, .450 Marlin
Model 1894 Chamberings:
.38 Special/.357 Magnum, .44 Special/.44 Magnum, .45 Colt
Action Lever-action
Effective firing range100 yd (91 m) - 300 yd (270 m)
Feed systemTubular magazine (capacity varies)
SightsIron sights, optional telescopic, integral 1913 rail on some models

The Marlin Model 336 is a lever-action rifle and carbine made by Marlin Firearms. Since its introduction in 1948, it has been offered in a number of different calibers and barrel lengths, but is commonly chambered in .30-30 Winchester or .35 Remington, using a 20- or 24-inch barrel. Currently, several models with a 16-, 19- and 20-inch barrels are available in .30-30 Winchester. The Model 336 is now back in production as of March 27, 2023.

Contents

History

The Model 336 is a direct development of the Marlin Model 1893 rifle which was produced from 1893 to 1936. [2] [3] Based on the patents of L.L. Hepburn, the Model 1893 incorporated a new locking bolt system and a two-piece firing pin. [3] In 1936, with only minor changes to the stock, forearm, and sights, the Model 1893 was redesignated the Model 1936 (soon renamed the Model 36). [3] All of these firearms featured a solid-top receiver made of forged steel and incorporated side ejection of fired cartridges. [3] Compared to the Winchester 94, then the predominant lever-action hunting rifle, the Model 36 was somewhat heavier with a simpler internal mechanism and a full pistol grip-type buttstock in contrast to the Winchester 94's straight grip stock.

In 1948, the Model 36 was replaced by the Model 336, which incorporated the patents of Thomas R. Robinson, Jr., a Marlin employee. [3] Sold under both the Marlin and Glenfield brands, the Model 336 has been in continuous production from 1948 to the present day, and is currently produced by Ruger Firearms under the Marlin brand.

While most current variants of the Model 336 feature a full pistol-grip walnut stock, 20 inch barrel and full length tube magazine, other versions of the 336 have been frequently offered by Marlin over the years, including barrel lengths of 16.25-inch, 18-inch, 22-inch, and 24-inch barrels; half-length magazines; straight grip stocks; and hardwood furniture. [3]

Design

An evolution of the Model 36 rifle, the Model 336 is easily distinguished from its predecessors by its open ejection port machined into the side of the receiver. Design improvements include a stronger and simpler round-profile chrome-plated breech bolt, a redesigned cartridge carrier, an improved extractor, [4] and coil-type main and trigger springs in place of the flat springs used in earlier Marlin rifles. [3] Like its predecessors, the receiver and all major working parts of the Model 336 are constructed of steel forgings. [3]

With its solid, flat top receiver and side ejection of fired cartridges, the Marlin 336 is prime candidate for use with a rifle scope. In 1956, Marlin also incorporated its proprietary Micro-Groove rifling system into the Model 336 and other centerfire Marlin rifles. [3] This rifling system, which used an increased number of relatively shallow rifling grooves, cut down production time and significantly extended the service life of machine tooling. [5] According to Marlin, the Micro-Groove system provides very uniform bore dimensions and a very smooth bore finish designed to improve accuracy, prevent gas leakage, and reduce bore fouling. [5]

The Model 336 is designed to be easily disassembled for cleaning. Removal of the lever pivot screw with a flathead screwdriver, allows field stripping of the lever arm, bolt, and ejector for maintenance. [3] Unlike many lever action designs, the Model 336 can be cleaned from the breech, much like a bolt-action rifle. [3] This in turn avoids damage to the muzzle caused by cleaning rods and tools.

Production

As of 1983, the Model 336 was ranked the #2 all-time leader in U.S. high-powered sporting rifle sales, after the Winchester Model 1894, with over 3.5 million sold. [6]

Ruger began manufacturing Marlins after buying rights to the design from Remington. New production of the 336 was announced in a news release that began on March 27, 2023. [7]

Other models based on the Model S336 action

This 30-30 Cal. Marlin rifle is engraved with scenes from American history commemorating America's Bicentennial. Bicentennial Rifle.jpg
This 30-30 Cal. Marlin rifle is engraved with scenes from American history commemorating America’s Bicentennial.

Marauder, Trapper, and Model 336Y
Marlin has made short carbine versions of the Model 336 over the years, including the Model 336 Marauder, Trapper and the Model 336Y (Y standing for "Youth Model"). Usually featuring a short 16- or 18-inch barrel, these carbines are considerably shorter and lighter than the standard 20" carbine. The Model 336Y also featured a short buttstock to enable use by younger shooters.

The Glenfield
For many years, Marlin produced a less-expensive Glenfield line of Model 336 rifles for retail at mass merchandise and department stores including: J.C. Penney, Sears Roebuck & Company, Western Auto, K-Mart and Wal-Mart. Marlin sold these rifles as the Glenfield Models 30, 30A, 30AS or 30AW. Other Model 336 production rifles were stamped with names chosen by the retailer, such as the J.C. Higgins (Sears) Model 45 and Model 50, the Montgomery Ward Western Field Model 740-A EMN, the J.C. Penney Foremost Model 3040, the K-Mart Model 30TK and the Model 3000 for Big 5 Sporting Goods. Mechanically identical to the Model 336, these mass market rifles were typically fitted with lower-cost hardwood (birch) stocks and forearms, and some metal finishing operations were eliminated in the interest of lowering unit cost. [3] By marketing a less-expensive version of the same rifle under a different name to mass merchandising stores, Marlin protected its customer base of small specialty gun dealers. [3]

Store Brand Models
By 1983, most of Marlin's mass merchandise retailers were in a position to insist on name-brand firearms, and the Glenfield line was dropped. However, Marlin continued to offer a less expensive version of the Model 336, variously called the Model 336W or Model 30AW, originally sold only to the Wal-Mart chain. Fitted with a hardwood stock and lower-cost sights, these rifles were frequently offered as part of a special package with an inexpensive rifle scope, sling, or other options. The Marlin Model 30AW package included a 3-9x32 factory-mounted scope and padded sling, but was otherwise identical to the Marlin Model 336W. [8]

XLR Series
Marlin also offers an XLR line of rifles in several calibers, all based on the Model 336 lever action design. The Model 336XLR features stainless construction, a 24-inch barrel, and a grey/black wood laminate stock.

Model 336SS
The Model 336M, a Model 336 carbine made largely of stainless steel, was introduced in 2000. It was replaced a year later by the Model 336SS, a 20" carbine offered only in .30-30 caliber. The Model 336SS features a forged stainless steel receiver, barrel, lever, and trigger. The magazine tube, springs, and loading gate are also fabricated from stainless, while other metal parts are nickel-plated steel.

Model 375

Introduced in 1980, the Model 375 uses the Model 336 lever action mechanism but was chambered in the then new .375 Winchester cartridge. This model was discontinued in 1984 after around 16,000 were produced.

Model 336ER

Introduced in 1984 this model was very similar in appearance to the Model 375 with the addition of the cross bolt safety. This model was originally to be chambered in both the .307 Winchester and .356 Winchester. The 307 Winchester was never manufactured, having only a few prototypes being made. The 356 Winchester was manufactured from 1984 to 1986, with only 2,441 of these rifles were ever produced and are considered a highly sought after collectors piece.

Model 444

Introduced in 1965, the Model 444 Marlin uses the Model 336 lever action mechanism, including the signature open ejection port machined into the side of the receiver, but is chambered for the .444 Marlin cartridge. [3] At its introduction, the Model 444 was the most powerful lever action rifle on the market. [3] With a muzzle energy of more than 3000 ft-lb, the Model 444 was intended for the largest North American game animals. [3] The Model 444 holds 4 cartridges in the magazine and one in the chamber, and was originally fitted with a 24-inch barrel and a straight grip buttstock. [3]

Early Model 444 rifles utilized a 1 in 38" rifling twist and were handicapped by a lack of suitable bullet weights. In addition, nearly all existing bullets for the .444 had been originally designed solely for use in handguns; used in the Model 444, the bullets tended to break up at higher rifle velocities. A new 265-grain bullet greatly improved the utility of the Model 444 as a hunting rifle, and other bullet weights have since been introduced. In 1971, Model 444's barrel length was reduced to 22 inches, and the rifle's buttstock was changed to a full pistol-grip design. [3] Later production rifles received a change in barrel twist to 1 in 20 inches to stabilize longer and heavier bullets. [3]

Model 1894

In 1963, Marlin added the .44 Magnum cartridge as an optional chambering in the Model 336T carbine, which featured a straight grip, a 20-inch round tapered barrel, and a full-length magazine. However, the rifle experienced continuing problems in loading and chambering the short .44 Magnum cartridge, and in 1964 Marlin abruptly dropped the .44 Magnum option. [3] Marlin was well aware of continued demand for a lever-action carbine in .44 Magnum caliber, and began searching for a replacement. In 1969, Marlin introduced the New Model 1894 in .44 Magnum/.44 Special caliber. [3] The New Model 1894 is not based on the Model 336 mechanism, instead, it uses the old short-receiver Model 1894 action incorporating the flat-profile bolt, which received minor improvements before being reintroduced in .44 Magnum caliber. [3] The decision to use the original Model 1894 action, a design originally designed to accommodate pistol-length cartridges such as the .38-40 and .44-40, proved a complete success. [3] In keeping with its predecessor, the New Model 1894 was given a straight grip buttstock instead of the pistol-grip style version fitted to the Model 336. [3] Since 1979, other calibers have been introduced for the Model 1894, including .38 Special/.357 Magnum, .41 Magnum, and the .45 Colt under the Models 1894C, 1894S, and 1894CS. [3] A cross-bolt safety was added in 1984. [3] The Model 1894 is particularly popular with cowboy action shooting enthusiasts, as well as shooters who desire to carry a shoulder arm and a revolver in the same caliber.

Model 1895

Introduced in 1972 and named in honor of the Marlin Model of 1895 (produced from 1895–1917), the current (New) Model 1895 rifle offered in .45-70 caliber utilizes the same Model 336 receiver design and lever action mechanism used in the Marlin Model 444. [3] [9] [10] A variant of the New Model 1895, called the 338MX and 338MXLR, has also become available in more recent times .338 Marlin Express. [11]

.450 Marlin

The .45-70 was originally a black powder cartridge and most factory ammo is loaded moderately for safety in older rifles, including the original Model of 1895. With increasing numbers of modern .45-70 rifles built with high strength actions (including the current Model 1895, the Ruger No. 1 single shot, the Browning BLR or the Siamese Mauser conversions), handloaders and specialty ammunition makers like Hornady, Buffalo Bore and Garrett produce high intensity .45-70 loadings that may equal or exceed the power of the .444 Marlin. Some approach the power of the .458 Winchester Magnum (although with smaller bullets with a much lower sectional density) and are effective against dangerous game. Use of such loadings in older .45-70 firearms is dangerous and should not be attempted; for that reason, Marlin introduced the .450 Marlin, a belted version of the .45-70 cartridge that will not chamber in older .45-70 rifles. However, many .45-70 Model 1895 owners chose to use the traditional .45-70 loads for deer-sized game with the option of using the high intensity .45-70 loads for more dangerous game. The 1895M lever-action rifle chambered in .450 Marlin was offered from 2000 until 2009 and is no longer in production.

Guide Guns

One recent innovation growing in popularity is the "Guide Gun" concept. The name most probably originates from the types of longarms favored by Alaskan hunting and wilderness guides as a defense against attacks by bears. The Guide Gun concept consists of a handy, short-barreled (usually 16 to 20 inches) lever action in a large caliber such as the .444 Marlin, .45-70, or .450 Marlin with a 3/4 length magazine tube. Usually custom-made by a skilled gunsmith, these guns are usually fitted with either open sights (such as ghost rings or express sights), a reflex sight, holographic sight or a long eye-relief scope mounted on a scout rail. Marlin New Model 1895 actions are frequently used to build this type of firearm. In an attempt to capitalize on this trend, Marlin began offering custom versions of their New Model 1895 action beginning with the now-discontinued Models 1895SDT and 336SDT. Current "Guide Gun" models include the Models 1895G, 1895GS, 1895GBL, 1895SBL, and 1895m.

Conversions

Aside from existing Marlin models, the basic Model 336/Model 1895 receiver and lever action mechanism has enjoyed some popularity as a parent for various wildcat caliber conversions. These custom rifles are increasingly popular in the western United States, Canada, and Alaska where encounters with grizzly bears and other potentially dangerous animals can be expected. Some of these wildcat cartridge conversions include the .450 Alaskan, .457 Wild West Magnum, .50 Alaskan, and the .510 Kodiak Express.

Of the conversions mentioned both the .450 Alaskan and the .457 Wild West Magnum do not require new barrels, but simply a chamber reaming and the required action modifications (referred to as "action lengthening"); the .457 Magnum also allows continued ability to use .45-70. The .510 Kodiak Express is the most powerful wildcat conversion available for the Marlin at 5,000+ ft-lbs. [12] Both the .50 Alaskan and .510 Kodiak Express require a new barrel to be installed on the rifle.

The .45-90 Sharps (also called .45-90 WCF or simply .45-90) has occasionally been used in converted Marlin 1895 rifles. The .45-90 conversion involves modifications to the action that increase the bolt travel and action timing (to adjust when a round is ejected, and when a new round lifts to enter the chamber), and the chamber in the barrel is reamed to .45-90 specifications. The case of a .45-90 is more than a quarter inch longer than the .45-70. The limitations on bolt travel of a converted Model 336 rifles are generally limit its case overall length (COL) to 2.85 inches. The 2.85 COL allows all bullets that work with the .45-70 action to be used in the converted .45-90. The .45-90 converted 1895 actions have the same pressure limitations as the .45-70 actions.

Marlin 336 year of manufacture

The following table can be used to date the year of manufacture of a Marlin 336. It is also valid for determining most other Marlin firearm build dates from 1948 to the present.

Marlin year of manufacture maybe determined from the following table of letter/numeral prefixes to the serial number:

DatePrefix(s)
1948 E
1949 F
1950 G
1951 H
1952 J
1953 K
1954 L
1955 M
DatePrefix(s)
1956 N
1957 P
1958 R
1959 S
1960 T
1961 U
1962 V
1963 W
1964 Y, Z
1965 AA
DatePrefix(s)
1966 AB
1967 AC
1968 AD, 68
1969 69
1970 70
1971 71
1972 72

Starting in 1973, the year of manufacture can be determined by subtracting the first two digits of the serial number from 100: Example: SN 2512345 would have been made in 1975 [100 - 25 = 75].

See also

Related Research Articles

<span class="mw-page-title-main">Single-shot</span> Firearm that holds one round of ammunition

In firearm designs, the term single-shot refers to guns that can hold only a single round of ammunition inside and thus must be reloaded manually after every shot. Compared to multi-shot repeating firearms ("repeaters"), single-shot designs have no moving parts other than the trigger, hammer/firing pin or frizzen, and therefore do not need a sizable receiver behind the barrel to accommodate a moving action, making them far less complex and more robust than revolvers or magazine/belt-fed firearms, but also with much slower rates of fire.

The 7.62 mm caliber is a nominal caliber used for a number of different cartridges. Historically, this class of cartridge was commonly known as .30 caliber, the equivalent in Imperial and United States Customary measures. It is most commonly used in hunting cartridges. The measurement equals 0.30 inches or three decimal lines, written .3″ and read as three-line.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

Winchester rifle is a comprehensive term describing a series of lever action repeating rifles manufactured by the Winchester Repeating Arms Company. Developed from the 1860 Henry rifle, Winchester rifles were among the earliest repeaters. The Model 1873 was particularly successful, being marketed by the manufacturer as "The Gun That Won the West".

<span class="mw-page-title-main">Lever action</span> Type of firearm action

A lever action is a type of action for repeating firearms that uses a manually operated cocking handle located around the trigger guard area that pivots forward to move the bolt via internal linkages, which will feed and extract cartridges into and out of the chamber, and cock the firing pin mechanism. This contrasts to other type of repeating actions such as the bolt-action, pump-action, semi-automatic, fully automatic, and/or burst mode actions. A firearm using this operating mechanism is colloquially referred to as a levergun.

<span class="mw-page-title-main">.44 Magnum</span> Revolver cartridge designed by Elmer Keith and Smith & Wesson (S&W)

The .44 Remington Magnum, also known as .44 Magnum or 10.9x33mmR, is a rimmed, large-bore cartridge originally designed for revolvers and quickly adopted for carbines and rifles. Despite the ".44" designation, guns chambered for the .44 Magnum round, its parent case, the .44 Special, and its parent case, the .44 Russian all use 0.429 in (10.9 mm) diameter bullets. The .44 Magnum is based on the .44 Special case but lengthened and loaded to higher pressures for greater velocity and energy.

The .256 Winchester Magnum is a firearms cartridge developed by Winchester, and was produced by necking-down a .357 Magnum cartridge to .257 diameter. It was designed for shooting small game and varmints.

<span class="mw-page-title-main">.22 Winchester Magnum Rimfire</span> Rimfire cartridge

The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).

The Ruger 10/22 is a series of semi-automatic rifles produced by American firearm manufacturer Sturm, Ruger & Co., chambered for the .22 Long Rifle rimfire cartridge. It uses a patented 10-round rotary magazine, though higher capacity box magazines are also available. The standard carbine version of the Ruger 10/22 has been in production continuously since 1964, making it one of the most successful rimfire rifle designs in history, with numerous third party manufacturers making parts and accessories for upgrading and customization. The 10/22's aftermarket is so prolific that a complete 10/22 can be built without using any Ruger-made components.

Marlin Firearms is an American manufacturer of semi-automatic, lever-action and bolt-action rifles. In the past the company made shotguns, derringers, and revolvers. Marlin owned the firearm manufacturer H&R Firearms. In 2007, Remington Arms, part of the Remington Outdoor Company, acquired Marlin Firearms. Remington produced Marlin-brand firearms at its Kentucky and New York manufacturing facilities. In 2020, Sturm, Ruger & Co. bought the Marlin business from bankrupt Remington Outdoor Company.

<span class="mw-page-title-main">.30-30 Winchester</span> Rifle cartridge designed by the Winchester Repeating Arms Company

The .30-30 Winchester cartridge was first marketed for the Winchester Model 1894 lever-action rifle in 1895. The .30-30, as it is most commonly known, along with the .25-35 Winchester, was offered that year as the United States' first small-bore sporting rifle cartridges designed for smokeless powder. Since its introduction, it has been utilized alongside the development of flatter shooting cartridges, most prominently those derived from designs subsidized by interest in military expenditures, yet the .30-30 has remained in widespread use almost entirely because of reliable effectiveness in civilian applications, proven by putting food on the table for millions of people within a practical range of hunting situations.

<span class="mw-page-title-main">Harrington & Richardson</span> Firearms brand

Harrington & Richardson Arms Company is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">Remington Model 14</span> Slide-action rifle

The Remington Model 14 is a pump-action repeating rifle designed for the Remington Arms company by John Pedersen. It is part of a series of rifles that include the Remington Model 14-1/2 and the Remington Model 141.

<span class="mw-page-title-main">.444 Marlin</span> Rifle cartridge

The .444 Marlin (10.9×57mmR) is a rifle cartridge designed in 1964 by Marlin Firearms and Remington Arms. It was designed to fill in a gap left by the older .45-70 when that cartridge was not available in any new lever-action rifles; at the time it was the largest lever-action cartridge available. The .444 resembles a lengthened .44 Magnum and provides a significant increase in velocity. It is usually used in the Marlin 444 lever-action rifle. Currently, Marlin, who is now owned by Ruger Firearms, does not offer the .444 chambering in any of their rifles. It remains to be seen when or if they will bring the chambering back into production.

The Winchester Model 1894 rifle is a lever-action repeating rifle that became one of the most famous and popular hunting rifles of all time. It was designed by John Browning in 1894 and originally chambered to fire two metallic black powder cartridges, the .32-40 Winchester and .38-55 Winchester. It was the first rifle to chamber the smokeless powder round, the .30 WCF in 1895. In 1901, Winchester created the new .32 Winchester Special caliber with production of rifles starting in 1902.

<span class="mw-page-title-main">Winchester Model 1892</span> Lever-action centerfire rifle

The Winchester Model 1892 was a lever-action repeating rifle designed by John Browning as a smaller, lighter version of his large-frame Model 1886, and which replaced the Model 1873 as the company's lever-action for pistol-caliber rounds such as the .44-40.

<span class="mw-page-title-main">Browning BLR</span> Lever action rifle

The Browning BLR is a lever-action rifle manufactured for Browning Arms Company by Miroku Firearms in Japan. It comes in many different variations and is chambered in numerous calibers from small and fast to the large Magnum rounds, and the large bore .450 Marlin.

<span class="mw-page-title-main">Marlin Model 1894</span> Lever-action rifle

The Marlin Model 1894 is a lever-action repeating rifle introduced in 1894 by the Marlin Firearms Company of North Haven, Connecticut. At its introduction the rifle came with a 24-inch barrel and was chambered for a variety of rounds such as .25-20 Winchester, .32-20 Winchester, .38-40, and .44-40. Variants in other chamberings remain in production today.

<span class="mw-page-title-main">.450 Marlin</span> US rifle cartridge

The .450 Marlin is a firearms cartridge designed as a modernized equivalent to the .45-70 cartridge. It was designed by a joint team of Marlin and Hornady engineers headed by Hornady's Mitch Mittelstaedt, and was released in 2000, with cartridges manufactured by Hornady and rifles manufactured by Marlin, mainly the Model 1895M levergun. The Browning BLR is also now available in .450 Marlin chambering, as is the Ruger No. 1. Marlin ceased manufacture of the 1895M rifle in 2009. In October 2022 it was rumored that Ruger Firearms, the new owner of Marlin Firearms, may be reintroducing the 450 Marlin in their Model 1895 guide gun, but this has not been confirmed by Marlin or Ruger.

The Winchester Hotchkiss was a bolt-action repeating rifle patented by Benjamin B. Hotchkiss in 1876 and produced by the Winchester Repeating Arms Company and Springfield Armory from 1878. The Hotchkiss, like most early bolt-actions, had a single rear locking lug integral with the bolt handle, but was unique in feeding multiple rounds from a tubular buttstock magazine similar to the Spencer rifle. The .45-70 Hotchkiss was acquired in limited numbers by the US Navy as the M1879, and by the US Army and several state militias as the M1883, making it the first center-fire bolt-action repeater to be adopted by any major military.

References

  1. Alberts, K. (2021, September 10). Fingers crossed for Ruger’s return of these six Marlins. Guns.com. https://www.guns.com/news/2021/09/10/fingers-crossed-for-rugers-return-of-these-six-marlins
  2. van Zwoll, Wayne (September 23, 2010). "A Lever Rifle's Lineage". Rifle Shooter. Petersens. Retrieved October 18, 2010.
  3. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Brophy, William S., Marlin Firearms: A History of the Guns and the Company That Made Them, Stackpole Books, ISBN   0811708772 (1989), pp. 193, 210, 216-221, 243, 252-267
  4. United States Patent Office, U.S. Patent No. 2,465,553, Application February 27, 1946: The extractor was designed by Thomas R. Robinson, Jr., a Marlin employee.
  5. 1 2 Fryxell, Glen E., Marlin's Micro Groove Barrels
  6. Wallack, LR. "Sixty Million Guns". 1983. In Gun Digest Treasury, Harold A. Murtz, editor, DBI Books. 1994 p.190 ISBN   0873491564
  7. "RUGER REINTRODUCES THE MARLIN MODEL 336 CLASSIC LEVER-ACTION RIFLE". Sturm, Ruger & Company, Inc. March 27, 2023. Retrieved August 30, 2023.
  8. "Marlin Model 336W". Archived from the original on October 3, 2008. Retrieved October 5, 2008. Model 336W  Also Available with Mounted Scope
  9. Hornady (2003). "Hornady Handbook of Cartridge Reloading". vol I (6th Edition ed.). Hornady Mfg Co. p. 586.
  10. Metcalf, Dick, Marlin’s Newest .45-70: The Model 1895SBL Archived February 6, 2009, at the Wayback Machine Shooting Times, September 23, 2010
  11. van Zwoll, Wayne. "All Aboard the .338 Marlin Express". Rifle Shooter. Petersen's. Archived from the original on November 7, 2010. Retrieved October 18, 2010.
  12. McPherson, M.L. (November 2008). "The .510 Kodiak Express the 5,000 foot-pound Marlin". Guns Magazine. Retrieved October 18, 2010.