Mercedes-Benz M272 engine

Last updated
Mercedes-Benz M272
Mercedes-Benz M 272 Typ 211.JPG
Overview
Manufacturer Mercedes-Benz
Production2004–2017
Layout
Configuration Naturally aspirated 90° V6
Displacement 2.5 L (2,496 cc)
3.0 L (2,996 cc)
3.5 L (3,498 cc)
Cylinder bore 88 mm (3.46 in)
92.9 mm (3.66 in)
Piston stroke 68.4 mm (2.69 in)
82 mm (3.23 in)
86 mm (3.39 in)
Cylinder block materialAluminum
Cylinder head materialAluminum
Valvetrain DOHC 4 valves x cyl. with continuous VVT
Combustion
Fuel system port injection
Fuel type Gasoline or E85 (M272 929)
Cooling system Water cooled
Output
Power output 204–316 PS (150–232 kW; 201–312 bhp)
Torque output 245–365 N⋅m (181–269 lb⋅ft)
Chronology
Predecessor Mercedes-Benz M112
Successor Mercedes-Benz M276

The Mercedes-Benz M272 engine is an automobile piston V6 engine family used in the 2000s (decade). Introduced in 2004, it is based on the M112 V6 introduced in 1998.

Contents

All M272 engines have aluminum engine blocks with a 90° V-angle with silicon/aluminum lined cylinders. The aluminum DOHC cylinder heads have 4 valves per cylinder. All have forged steel connecting rods, one-piece cast crankshaft, iron-coated aluminum pistons and a magnesium intake manifold. Like the M112, a balance shaft is installed in the engine block between the cylinder banks to deal with vibrations in the 90 degree V6 design. This essentially eliminates first and second order moments. A dual-length Variable Length Intake Manifold is fitted to optimize engine flexibility.

Continuous VVT was adopted for the first time. Featured on both the intake and exhaust camshafts, each can be varied through a range of 40 degrees. The twin spark plug system was replaced by a regular single spark plug per cylinder. New electronic coolant flow control has replaced the mechanical thermostat for improved engine warm-up and optimum control of engine temperature. Also tumble flaps are used to improve output at low engine speeds.

E25

The E25 is a 2.5 L (2,496 cc) version. Bore and stroke dimension is 88 mm × 68.4 mm (3.46 in × 2.69 in). Output is 204 PS (150 kW; 201 bhp) at 6100 rpm with 245 N⋅m (181 lb⋅ft) of torque at 2900-5500 rpm.

Applications:

E30

The E30 is a 3.0 L (2,996 cc) version. Bore and stroke is 88 mm × 82 mm (3.46 in × 3.23 in). Output is 231 PS (170 kW; 228 bhp) at 6000 rpm with 300 N⋅m (221 lb⋅ft) of torque at 2500-5000 rpm.

Applications:

E35

The E35 is a 3.5 L (3,498 cc) version. Bore and stroke dimension is 92.9 mm × 86 mm (3.66 in × 3.39 in). Output is 272 PS (200 kW; 268 bhp) at 6000 rpm with 350 N⋅m (258 lb⋅ft) of torque at 3500 rpm. A direct injected variant debuted in 2006 under the name Stratified-Charged Gasoline Injection (CGI). First fitted to the CLS350 CGI, it produces 292 PS (215 kW; 288 bhp) and 365 N⋅m (269 lb⋅ft) of torque while lowering fuel consumption. In 2008, the non-CGI engine was uprated to 316 PS (232 kW; 312 bhp) at 6500 rpm and 360 N⋅m (266 lb⋅ft) of torque at 4900 rpm with 350Nm being delivered at 2000rpm. This was achieved by raising the rev-limit to 7200 rpm, increasing the compression ratio using enhanced, weight-optimized pistons with a curved surface, reinforcements in the area of the piston pins, deeper pockets for the valve seats, single-stage intake manifold, lightweight valves with sodium cooling, conical valve springs, tri-oval chain sprocket, and a new cylinder head.

Applications:

Balance shaft gear and other issues

M272 engines that were sold between 2004 [1] [2] and 2008 with engine serial numbers below 2729..30 468993 often show early wear of the balance shaft gears, requiring extensive repairs at a retail cost of over $4,000. [3] [4] These complaints led to a class action lawsuit against Mercedes-Benz (Greg Suddreth and Paul Dunton v. Mercedes-Benz USA, LLC), which alleged the M272 engines are equipped with defective balance shafts gears which "wear out prematurely, excessively and without warning, purportedly causing the vehicles to malfunction, the check engine light to illuminate and the vehicle to misfire and/or stop driving." [5] The suit further alleged that Mercedes knew of this problem, sending out repair bulletins on how to address this issue and ultimately changing the balance shaft gears to avoid this problem. This suit was ultimately dismissed with the judge agreeing with Mercedes that because the gears fail at 60 -80K miles and outside of the warranty period, Mercedes is not legally responsible for these problems. [6]

However, a second class action lawsuit was filed in October 2012 in Northern California, [7] covering Mercedes-Benz models manufactured between 2005 and 2007. A preliminary settlement was reached on April 8, 2015, [8] which would see owners compensated for up to 70% of the cost of the repair.

These engines also have a common issue with their intake manifolds. The M273 also has similar issues but not to the same extent. The plastic lever that operates the opening and closing of the variable length intake manifold can break prematurely. Mercedes doesn't have this particular part listed, instead they sell the whole intake manifold as one unit which can cost upwards of $800 US. There are a number of third-party companies that sell a replacement lever made out of metal at a much cheaper cost.

See also

Related Research Articles

<span class="mw-page-title-main">Mercedes-Benz GLK-Class</span> Motor vehicle

The Mercedes-Benz GLK-Class is a Compact luxury crossover SUV produced from 2008 to 2015, debuting at the 2008 Beijing Auto Show. The name GLK is an acronym for Geländewagen Luxus Kompaktklasse, taking its name from larger Mercedes-Benz GL-Class, which in turn was named after the G-Wagen or Geländewagen. Thus, the GL is the luxury-oriented version of the G, and GLK is the compact version of the GL.

<span class="mw-page-title-main">Brabus</span> German high-performance automotive aftermarket tuning company

Brabus GmbH is a German high-performance automotive aftermarket tuning company founded in 1977 in Bottrop. Brabus specialises mainly in Mercedes-Benz, Maybach and Smart vehicles. They have also modified other vehicles too, including Porsche.

<span class="mw-page-title-main">Mercedes-Benz M271 engine</span> Reciprocating internal combustion engine

The Mercedes-Benz M271 engine is a straight-4 automobile piston engine family used in the 2000s (decade).

<span class="mw-page-title-main">Mercedes-Benz M112 engine</span> Reciprocating internal combustion engine

The Mercedes-Benz M112 engine is a gasoline-fueled, 4-stroke, spark-ignition, internal-combustion automobile piston V6 engine family used in the 2000s. Introduced in 1996, it was the first V6 engine ever built by Mercedes. A short time later the related M113 V8 was introduced.

<span class="mw-page-title-main">Mercedes-Benz M113 engine</span> Reciprocating internal combustion engine

The Mercedes-Benz M113 engine is a gasoline-fueled, spark-ignition internal-combustion V8 automobile engine family used in the 2000s. It is based on the similar M112 V6 introduced in 1997, then later phased out in 2007 for the M156 AMG engine and the M273 engine.

<span class="mw-page-title-main">Mercedes-Benz E-Class (W211)</span> Motor vehicle

The Mercedes-Benz W211 is the third generation Mercedes-Benz E-Class made from 2001 to 2009 in sedan/saloon and station wagon/estate configurations – replacing the W210 E-Class models and superseded by the Mercedes-Benz W212 in 2009.

<span class="mw-page-title-main">Mercedes-Benz M156 engine</span> Reciprocating internal combustion engine

The M156 is the first automobile V8 engine designed autonomously by Mercedes-Benz subsidiary Mercedes-AMG, as previous AMG engines have always been based on original Mercedes engines. The engine was designed to be a naturally aspirated racing unit, and is also used in a number of high-performance AMG-badged Mercedes-Benz models. The engine was designed by Bernd Ramler, famed by the design of the Porsche Carrera GT's 5.7-liter V-10 engine.

<span class="mw-page-title-main">Subaru EJ engine</span> Reciprocating internal combustion engine

The Subaru EJ engine is a series of four-stroke automotive engines manufactured by Subaru. They were introduced in 1989, intended to succeed the previous Subaru EA engine. The EJ series was the mainstay of Subaru's engine line, with all engines of this series being 16-valve horizontal flat-fours, with configurations available for single, or double-overhead camshaft arrangements. Naturally aspirated and turbocharged versions are available, ranging from 96 to 310 hp. These engines are commonly used in light aircraft, kit cars and engine swaps into air-cooled Volkswagens, and are also popular as a swap into copy wasserboxer engined Volkswagen T3/Vanagon. Primary engineering on the EJ series was done by Masayuki Kodama, Takemasa Yamada and Shuji Sawafuji of Fuji Heavy Industries, Subaru's parent company.

<span class="mw-page-title-main">Mercedes-Benz E-Class (W212)</span> Fourth generation of Mercedes-Benz E-Class

The W212 and S212 Mercedes-Benz E-Class series is the fourth-generation of the E-Class range of executive cars which was produced by Mercedes-Benz between 2009 and 2016 as the successor to the W211 E-Class. The body styles of the range are:

<span class="mw-page-title-main">Mercedes-Benz C-Class (W204)</span> German mid-size car (2007–2015)

The Mercedes-Benz C-Class (W204) is the third generation of the Mercedes-Benz C-Class. It was manufactured and marketed by Mercedes-Benz in sedan/saloon (2007–2014), station wagon/estate (2008–2014) and coupé (2011–2015) bodystyles, with styling by Karlheinz Bauer and Peter Pfeiffer.

<span class="mw-page-title-main">Mitsubishi 4B1 engine</span> Reciprocating internal combustion engine

The Mitsubishi 4B1 engine is a range of all-alloy straight-4 piston engines built at Mitsubishi's Japanese "World Engine" powertrain plant in Shiga on the basis of the Global Engine Manufacturing Alliance (GEMA). Although the basic designs of the various engines are the same, their exact specifications are individually tailored for each partner. The cylinder block and other basic structural parts of the engine were jointly developed by the GEMA companies, but the intake and exhaust manifolds, the cylinder head's intake and exhaust ports, and other elements related to engine tuning were independently developed by Mitsubishi.

<span class="mw-page-title-main">Mercedes-Benz M273 engine</span> Reciprocating internal combustion engine

The Mercedes-Benz M273 engine is a V8 automobile piston engine family used in the 2000s (decade). It was based on the similar M272 V6 introduced in 2004.

<span class="mw-page-title-main">Mercedes-Benz M278 engine</span> Reciprocating internal combustion engine

The Mercedes-Benz M278 is a family of direct injected, Bi-turbocharged, V8 gasoline automotive piston engines.

<span class="mw-page-title-main">Mercedes-Benz M276 engine</span> Reciprocating internal combustion engine

The Mercedes–Benz M276 engine is a direct injected, gasoline automotive piston V6 engine.

<span class="mw-page-title-main">Kompressor (Mercedes-Benz)</span> Marketing name by Mercedes-Benz

Kompressor is a marketing name for forced induction (supercharged) Mercedes-Benz engines. The term is not widely used by other motor manufacturers.

<span class="mw-page-title-main">Mercedes-Benz C-Class (W203)</span> Motor vehicle

The Mercedes-Benz C-Class (W203) is the internal designation for a range of compact executive cars manufactured and marketed by DaimlerChrysler from 1999 to 2010, as the second generation of the C-Class — in sedan/saloon, three-door hatchback coupé and station wagon/estate body styles.

<span class="mw-page-title-main">Mercedes-Benz M260/M264 engine</span> Reciprocating internal combustion engine

The M260 and M264 are turbocharged inline-four engines produced by Mercedes-Benz since 2017. It is the successor to the M270 and M274 engine.

<span class="mw-page-title-main">Mercedes-Benz OM646 engine</span> Reciprocating internal combustion engine

The OM646 is a turbocharged inline-four engine produced between 2002 and 2010 by Mercedes-Benz.

References

  1. ↑ O'Donnell, Matt (15 October 2010). "Mercedes M272 & M273 Engine Class Action" . Retrieved Aug 29, 2013.
  2. ↑ "Mercedes-Benz named in class action over safety issues related to its M272 or M273 engines" . Retrieved Aug 29, 2013.
  3. ↑ Konigstiger. "How to interpret Balance Shaft Sprocket Engine Serial #?" . Retrieved Mar 12, 2013.
  4. ↑ ZbylutMotorWorks. "Mercedes-Benz M272 Balance Shaft Failure". YouTube . Archived from the original on 2021-12-13. Retrieved Mar 12, 2013.
  5. ↑ O'Donnell, Matt (15 October 2010). "Mercedes M272 & M273 Engine Class Action" . Retrieved Mar 12, 2013.
  6. ↑ Jackson, Russell. "District Court Dismisses Automotive Class Action" . Retrieved Mar 12, 2013.
  7. ↑ "Mercedes-Benz named in class action over safety issues related to its M272 or M273 engines" . Retrieved Mar 12, 2013.
  8. ↑ "ORDER by Judge Thelton E. Henderson granting 142 Motion for Preliminary Approval of Class Action Settlement. Motion for Final Approval due 08/03/2015. (Filed on 4/8/2015)" (PDF). Retrieved June 29, 2015.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.