Momentum (electromagnetic simulator)

Last updated
Momentum 3D Planar EM Simulator
Developer(s) Keysight EEsof EDA
Platform Element in ADS
Type EM simulation
Website www.keysight.com/us/en/products/software/pathwave-design-software/pathwave-advanced-design-system/pathwave-ads-simulation-elements/momentum-g2-element.html

Momentum is 3-D planar EM simulation software [1] for electronics and antenna analysis, a partial differential equation solver of Maxwell's equations based on the method of moments. [2] It is a 3-D planar electromagnetic (EM) simulator used for passive circuit analysis.

It combines full-wave and quasi-static EM solvers to provide insight into EM behavior of MMIC, RFIC, RF Board, Signal Integrity, and antenna designs. The Momentum simulation engine is integrated into Keysight ADS [3] and Keysight Genesys.

It was originally developed by a Belgian company, Alphabit, a spinoff from the Electromagnetics Group [4] of Ghent University and IMEC. [5] [6] Early contributors to the technology include Niels Faché, Jan Van Hese, Frank Libbrecht, Jeannick Sercu, Luc Vandormael, Mieke Herreman, Peter Kok, Tom Dhaene and Krist Blomme. [7]

The company was acquired by Hewlett-Packard, later it became part of Agilent Technologies and since November 2014 it is part of Keysight Technologies EEsof division, the current owners. [8]

Related Research Articles

<span class="mw-page-title-main">Agilent Technologies</span> American technology company

Agilent Technologies, Inc. is an American life sciences company that provides instruments, software, services, and consumables for the entire laboratory workflow. Its global headquarters is located in Santa Clara, California. Agilent was established in 1999 as a spin-off from Hewlett-Packard. The resulting IPO of Agilent stock was the largest in the history of Silicon Valley at the time.

The boundary element method (BEM) is a numerical computational method of solving linear partial differential equations which have been formulated as integral equations, including fluid mechanics, acoustics, electromagnetics, fracture mechanics, and contact mechanics.

<span class="mw-page-title-main">Finite-difference time-domain method</span>

Finite-difference time-domain (FDTD) or Yee's method is a numerical analysis technique used for modeling computational electrodynamics. Since it is a time-domain method, FDTD solutions can cover a wide frequency range with a single simulation run, and treat nonlinear material properties in a natural way.

Advanced Design System (ADS) is an electronic design automation software system produced by PathWave Design, a division of Keysight Technologies. It provides an integrated design environment to designers of RF electronic products such as mobile phones, pagers, wireless networks, satellite communications, radar systems, and high-speed data links.

<span class="mw-page-title-main">Signal integrity</span>

Signal integrity or SI is a set of measures of the quality of an electrical signal. In digital electronics, a stream of binary values is represented by a voltage waveform. However, digital signals are fundamentally analog in nature, and all signals are subject to effects such as noise, distortion, and loss. Over short distances and at low bit rates, a simple conductor can transmit this with sufficient fidelity. At high bit rates and over longer distances or through various mediums, various effects can degrade the electrical signal to the point where errors occur and the system or device fails. Signal integrity engineering is the task of analyzing and mitigating these effects. It is an important activity at all levels of electronics packaging and assembly, from internal connections of an integrated circuit (IC), through the package, the printed circuit board (PCB), the backplane, and inter-system connections. While there are some common themes at these various levels, there are also practical considerations, in particular the interconnect flight time versus the bit period, that cause substantial differences in the approach to signal integrity for on-chip connections versus chip-to-chip connections.

<span class="mw-page-title-main">Computational electromagnetics</span> Branch of physics

Computational electromagnetics (CEM), computational electrodynamics or electromagnetic modeling is the process of modeling the interaction of electromagnetic fields with physical objects and the environment.

<span class="mw-page-title-main">Naval Surface Warfare Center Crane Division</span> Division of the U.S. Naval Surface Warfare Center

Naval Surface Warfare Center Crane Division is the principal tenant command located at Naval Support Activity Crane. NSA Crane is a United States Navy installation located approximately 35 miles (56 km) southwest of Bloomington, Indiana, and predominantly located in Martin County, but small parts also extend into Greene and Lawrence counties. It was originally established in 1941 under the Bureau of Ordnance as the Naval Ammunition Depot for the production, testing, and storage of ordnance under the first supplemental Defense Appropriation Act. The base is named after William M. Crane. The base is the third largest naval installation in the world by geographic area and employs approximately 3,300 people. The closest community is the small town of Crane, which lies adjacent to the northwest corner of the facility.

Dassault Systèmes Simulia Corp. is a computer-aided engineering (CAE) vendor. Formerly known as Abaqus Inc. and previously Hibbitt, Karlsson & Sorensen, Inc., (HKS), the company was founded in 1978 by David Hibbitt, Bengt Karlsson and Paul Sorensen, and has its headquarters in Providence, Rhode Island.

<span class="mw-page-title-main">Ansys HFSS</span>

Ansys HFSS,  is a commercial finite element method solver for electromagnetic (EM) structures from Ansys that offers multiple state-of-the-art solver technologies. Each solver in ANSYS HFSS is an automated solution processor for which the user dictates the geometry, properties of the material and the required range of solution frequencies.

PathWave Design is a division of Keysight Technologies that was formerly called EEsof. It is a provider of electronic design automation (EDA) software that helps engineers design products such as cellular phones, wireless networks, radar, satellite communications systems, and high-speed digital wireline infrastructure. Applications include electronic system level (ESL), high-speed digital, RF-Mixed signal, device modeling, RF and Microwave design for commercial wireless, aerospace, and defense markets.

FEM Element is a commercial finite element method solver for electromagnetic structures from EEsof. FEM Element can perform electromagnetic simulation of arbitrarily-shaped, passive three-dimensional structures.

AWR Corporation is an electronic design automation (EDA) software company, formerly known as Applied Wave Research, and then acquired by National Instruments

Feko is a computational electromagnetics software product developed by Altair Engineering. The name is derived from the German acronym "Feldberechnung für körper mit beliebiger oberfläche", which can be translated as "field calculations involving bodies of arbitrary shape". It is a general purpose 3D electromagnetic (EM) simulator.

<span class="mw-page-title-main">X-parameters</span>

X-parameters are a generalization of S-parameters and are used for characterizing the amplitudes and relative phase of harmonics generated by nonlinear components under large input power levels. X-parameters are also referred to as the parameters of the Poly-Harmonic Distortion (PHD) nonlinear behavioral model.

AdvancedTCA Extensions for Instrumentation and Test (AXIe) is a modular instrumentation standard created by Aeroflex, Keysight Technologies, and Test Evolution Corporation. (In October 2008, Aeroflex had purchased a 40% shareholding in Test Evolution.)

The following table lists software packages with their own article on Wikipedia that are nominal EM (electromagnetic) simulators;

XFdtd is electromagnetic simulation software with a very wide variety of applications in RF circuit, antenna, military/defense, medical EM, photonics, radar, component, metamaterial, and related fields. It originally stood for X Finite Difference Time Domain and was first developed in the mid 1990s by Remcom Incorporated of State College, PA in the United States. XFdtd includes full wave (FDTD), electrostatic, thermal-biological, circuit, and 2D Eigen solver and integrates with PO/MEC, and GTD/UTD method solvers.

Optimization Systems Associates (OSA) was founded by John Bandler in 1983. OSA produced the first commercial implementation of space mapping optimization to enhance the speed and accuracy of engineering design. OSA’s primary thrust was in computer-aided design (CAD) and simulation and optimization of radio-frequency and microwave circuits and systems. Its products included developments of Bandler's space mapping concept and methodology, which facilitates effective modeling and design optimization of computationally intensive engineering systems.

Ulrich Jakobus is Senior Vice President - Electromagnetic Solutions of Altair, Germany and was awarded Fellow of the Institute of Electrical and Electronics Engineers (IEEE) in 2013 for leadership in hybrid computational tool development and commercialization. His research laid the foundations for the commercial electromagnetics code FEKO which is used in antenna design, antenna placement, electromagnetic compatibility, microwave components, bioelectromagnetics, radar cross section and related fields.

<span class="mw-page-title-main">Weng Cho Chew</span> Malaysian-American electrical engineer

Weng Cho Chew is a Malaysian-American electrical engineer and applied physicist known for contributions to wave physics, especially computational electromagnetics. He is a Distinguished Professor of Electrical and Computer Engineering at Purdue University.

References

  1. "Momentum 3D Planar EM Simulator". Keysight.com. Retrieved 5 May 2015.{{cite web}}: CS1 maint: url-status (link)
  2. Momentum tutorial by Bill Kuhn at Kansas State University
  3. "PathWave Advanced Design System (ADS)". Keysight Technologies.{{cite web}}: CS1 maint: url-status (link)
  4. "EM Group".
  5. "Agilent EEsof, High Frequency Leader" by Jack Horgan, EDA Cafe
  6. "Focus on Belgium: IT research and development on the rise" by Chris Green for ITPro
  7. "Prof. dr. ir. Tom Dhaene". ugent.be. Retrieved 5 May 2015.
  8. Home page of Momentum at PathWave