Morpholine

Last updated
Morpholine [1]
numbered skeletal formula of the morpholine molecule Morpholine numbering.svg
numbered skeletal formula of the morpholine molecule
perspective skeletal formula of the morpholine molecule Morpholine-stereo-2D-skeletal.png
perspective skeletal formula of the morpholine molecule
ball-and-stick model of the morpholine molecule Morpholine-from-xtal-3D-balls-B.png
ball-and-stick model of the morpholine molecule
space-filling model of the morpholine molecule Morpholine-from-xtal-3D-vdW-B.png
space-filling model of the morpholine molecule
Names
Preferred IUPAC name
Morpholine [2]
Other names
Diethylenimide oxide
1,4-Oxazinane
Tetrahydro-1,4-oxazine
Diethylene imidoxide
Diethylene oximide
Tetrahydro-p-oxazine
Identifiers
3D model (JSmol)
102549
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.003.469 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 203-815-1
1803
KEGG
PubChem CID
RTECS number
  • QD6475000
UNII
UN number 2054
  • InChI=1S/C4H9NO/c1-3-6-4-2-5-1/h5H,1-4H2 Yes check.svgY
    Key: YNAVUWVOSKDBBP-UHFFFAOYSA-N Yes check.svgY
  • InChI=1/C4H9NO/c1-3-6-4-2-5-1/h5H,1-4H2
    Key: YNAVUWVOSKDBBP-UHFFFAOYAU
  • C1CNCCO1
Properties
C4H9NO
Molar mass 87.122 g·mol−1
AppearanceColorless liquid
Odor Weak ammonia-like or fish-like [3]
Density 1.007 g/cm3
Melting point −5 °C (23 °F; 268 K)
Boiling point 129 °C (264 °F; 402 K)
miscible
Vapor pressure 6 mmHg (20 °C) [3]
Acidity (pKa)8.36 [4] (of conjugate acid)
-55.0·10−6 cm3/mol
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Flammable, Corrosive
GHS labelling:
GHS-pictogram-flamme.svg GHS-pictogram-acid.svg GHS-pictogram-exclam.svg
Danger
H226, H302, H312, H314, H332
P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P280, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P310, P312, P321, P322, P330, P363, P370+P378, P403+P235, P405, P501
NFPA 704 (fire diamond)
NFPA 704.svgHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
3
0
Flash point 31 °C (88 °F; 304 K)
275 °C (527 °F; 548 K)
Explosive limits 1.4%–11.2% [3]
Lethal dose or concentration (LD, LC):
1220 mg/kg (mammal, oral)
525 mg/kg (mouse, oral)
1050 mg/kg (rat, oral) [5]
365 ppm (mouse, 2 hr) [5]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 20 ppm (70 mg/m3) [skin] [3]
REL (Recommended)
TWA 20 ppm (70 mg/m3) ST 30 ppm (105 mg/m3) [skin] [3]
IDLH (Immediate danger)
1400 ppm [3]
Safety data sheet (SDS) hazard.com
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Yes check.svgY  verify  (what is  Yes check.svgYX mark.svgN ?)

Morpholine is an organic chemical compound having the chemical formula O(C H 2CH2)2 NH. This heterocycle features both amine and ether functional groups. Because of the amine, morpholine is a base; its conjugate acid is called morpholinium. For example, treating morpholine with hydrochloric acid makes the salt morpholinium chloride. It is a colorless liquid with a weak, ammonia- or fish-like odor. [6] The naming of morpholine is attributed to Ludwig Knorr, who incorrectly believed it to be part of the structure of morphine . [7]

Contents

Production

Morpholine is often produced industrially by the dehydration of diethanolamine with sulfuric acid. [8] Alternatively, it can be made from bis(2-chloroethyl)ether in a reaction with ammonia, by which also ammonium chloride is formed. Morpholin-Synthese.png

Morpholine is also produced industrially from diethylene glycol and ammonia, under high temperature and pressure, in the pressence of hydrogen and a suitable catalyst. [9]

Uses

Industrial applications

Morpholine is a common additive, in parts per million concentrations, for pH adjustment in both fossil fuel and nuclear power plant steam systems. Morpholine is used because its volatility is about the same as water, so once it is added to the water, its concentration becomes distributed rather evenly in both the water and steam phases. Its pH-adjusting qualities then become distributed throughout the steam plant to provide corrosion protection. Morpholine is often used in conjunction with low concentrations of hydrazine or ammonia to provide a comprehensive all-volatile treatment chemistry for corrosion protection for the steam systems of such plants. Morpholine decomposes reasonably slowly in the absence of oxygen at the high temperatures and pressures in these steam systems.

Organic synthesis

Morpholine undergoes most chemical reactions typical for other secondary amines, though the presence of the ether oxygen withdraws electron density from the nitrogen, rendering it less nucleophilic (and less basic) than structurally similar secondary amines such as piperidine. For this reason, it forms a stable chloramine. [10]

It is commonly used to generate enamines. [11]

Morpholine is widely used in organic synthesis. For example, it is a building block in the preparation of the antibiotic linezolid, the anticancer agent gefitinib (Iressa) and the analgesic dextromoramide.

In research and in industry, the low cost and polarity of morpholine lead to its common use as a solvent for chemical reactions.

Agriculture

As a fruit coating

Morpholine is used as a chemical emulsifier in the process of waxing fruit. Naturally, fruits make waxes to protect against insects and fungal contamination, but this can be lost as the fruit is cleaned. A small amount of new wax is applied to replace it. Morpholine is used as an emulsifier and solubility aid for shellac, which is used as a wax for fruit coating. [12] The European Union has forbidden the use of morpholine in fruit coating. [13] [14]

As a component in fungicides

Morpholine derivatives used as agricultural fungicides in cereals are known as ergosterol biosynthesis inhibitors.

See also

Related Research Articles

<span class="mw-page-title-main">Dimethylaniline</span> Chemical compound

N,N-Dimethylaniline (DMA) is an organic chemical compound, a substituted derivative of aniline. It is a tertiary amine, featuring a dimethylamino group attached to a phenyl group. This oily liquid is colourless when pure, but commercial samples are often yellow. It is an important precursor to dyes such as crystal violet.

<span class="mw-page-title-main">Dichloromethane</span> Chemical compound

Dichloromethane is an organochlorine compound with the formula CH2Cl2. This colorless, volatile liquid with a chloroform-like, sweet odor is widely used as a solvent. Although it is not miscible with water, it is slightly polar, and miscible with many organic solvents.

<span class="mw-page-title-main">Phthalic anhydride</span> Chemical compound

Phthalic anhydride is the organic compound with the formula C6H4(CO)2O. It is the anhydride of phthalic acid. Phthalic anhydride is a principal commercial form of phthalic acid. It was the first anhydride of a dicarboxylic acid to be used commercially. This white solid is an important industrial chemical, especially for the large-scale production of plasticizers for plastics. In 2000, the worldwide production volume was estimated to be about 3 million tonnes per year.

<span class="mw-page-title-main">Ethanolamine</span> Chemical compound

Ethanolamine is a naturally occurring organic chemical compound with the formula HOCH
2CH
2NH
2 or C
2H
7NO. The molecule is bifunctional, containing both a primary amine and a primary alcohol. Ethanolamine is a colorless, viscous liquid with an odor reminiscent of ammonia.

<span class="mw-page-title-main">Methylamine</span> Organic chemical compound

Methylamine is an organic compound with a formula of CH3NH2. This colorless gas is a derivative of ammonia, but with one hydrogen atom being replaced by a methyl group. It is the simplest primary amine.

<span class="mw-page-title-main">Diisopropyl ether</span> Chemical compound

Diisopropyl ether is a secondary ether that is used as a solvent. It is a colorless liquid that is slightly soluble in water, but miscible with organic solvents. It is used as an extractant and an oxygenate gasoline additive. It is obtained industrially as a byproduct in the production of isopropanol by hydration of propylene. Diisopropyl ether is sometimes represented by the abbreviation DIPE.

Triethylamine is the chemical compound with the formula N(CH2CH3)3, commonly abbreviated Et3N. It is also abbreviated TEA, yet this abbreviation must be used carefully to avoid confusion with triethanolamine or tetraethylammonium, for which TEA is also a common abbreviation. It is a colourless volatile liquid with a strong fishy odor reminiscent of ammonia. Like diisopropylethylamine (Hünig's base), triethylamine is commonly employed in organic synthesis, usually as a base.

<i>tert</i>-Butyl alcohol Chemical compound

tert-Butyl alcohol is the simplest tertiary alcohol, with a formula of (CH3)3COH (sometimes represented as t-BuOH). Its isomers are 1-butanol, isobutanol, and butan-2-ol. tert-Butyl alcohol is a colorless solid, which melts near room temperature and has a camphor-like odor. It is miscible with water, ethanol and diethyl ether.

<span class="mw-page-title-main">Dimethylamine</span> Chemical compound

Dimethylamine is an organic compound with the formula (CH3)2NH. This secondary amine is a colorless, flammable gas with an ammonia-like odor. Dimethylamine is commonly encountered commercially as a solution in water at concentrations up to around 40%. An estimated 270,000 tons were produced in 2005.

Bromoethane, also known as ethyl bromide, is a chemical compound of the haloalkanes group. It is abbreviated by chemists as EtBr. This volatile compound has an ether-like odor.

<span class="mw-page-title-main">Cyanamide</span> Chemical compound featuring a nitrile group attached to an amino group

Cyanamide is an organic compound with the formula CN2H2. This white solid is widely used in agriculture and the production of pharmaceuticals and other organic compounds. It is also used as an alcohol-deterrent drug. The molecule features a nitrile group attached to an amino group. Derivatives of this compound are also referred to as cyanamides, the most common being calcium cyanamide (CaCN2).

<span class="mw-page-title-main">Ethylenediamine</span> Chemical compound

Ethylenediamine (abbreviated as en when a ligand) is the organic compound with the formula C2H4(NH2)2. This colorless liquid with an ammonia-like odor is a basic amine. It is a widely used building block in chemical synthesis, with approximately 500,000 tonnes produced in 1998. Ethylenediamine is the first member of the so-called polyethylene amines.

<span class="mw-page-title-main">Diethanolamine</span> Chemical compound

Diethanolamine, often abbreviated as DEA or DEOA, is an organic compound with the formula HN(CH2CH2OH)2. Pure diethanolamine is a white solid at room temperature, but its tendencies to absorb water and to supercool often results in it being found in a colorless, viscous liquid state. Diethanolamine is polyfunctional, being a secondary amine and a diol. Like other organic amines, diethanolamine acts as a weak base. Reflecting the hydrophilic character of the secondary amine and hydroxyl groups, DEA is soluble in water. Amides prepared from DEA are often also hydrophilic. In 2013, the chemical was classified by the International Agency for Research on Cancer as "possibly carcinogenic to humans" (Group 2B).

<span class="mw-page-title-main">Allyl alcohol</span> Organic compound (CH2=CHCH2OH)

Allyl alcohol is an organic compound with the structural formula CH2=CHCH2OH. Like many alcohols, it is a water-soluble, colourless liquid. It is more toxic than typical small alcohols. Allyl alcohol is used as a precursor to many specialized compounds such as flame-resistant materials, drying oils, and plasticizers. Allyl alcohol is the smallest representative of the allylic alcohols.

Benzyl chloride, or α-chlorotoluene, is an organic compound with the formula C6H5CH2Cl. This colorless liquid is a reactive organochlorine compound that is a widely used chemical building block.

<span class="mw-page-title-main">Ethylamine</span> Chemical compound

Ethylamine, also known as ethanamine, is an organic compound with the formula CH3CH2NH2. This colourless gas has a strong ammonia-like odor. It condenses just below room temperature to a liquid miscible with virtually all solvents. It is a nucleophilic base, as is typical for amines. Ethylamine is widely used in chemical industry and organic synthesis.

<span class="mw-page-title-main">Dimethoxymethane</span> Chemical compound

Dimethoxymethane, also called methylal, is a colorless flammable liquid with a low boiling point, low viscosity and excellent dissolving power. It has a chloroform-like odor and a pungent taste. It is the dimethyl acetal of formaldehyde. Dimethoxymethane is soluble in three parts water and miscible with most common organic solvents.

<span class="mw-page-title-main">Diethylamine</span> Chemical compound

Diethylamine is an organic compound with the formula (CH3CH2)2NH. It is a secondary amine. It is a flammable, weakly alkaline liquid that is miscible with most solvents. It is a colorless liquid, but commercial samples often appear brown due to impurities. It has a strong ammonia-like odor.

Diisopropylamine is a secondary amine with the chemical formula (Me2CH)2NH (Me = methyl). Diisopropylamine is a colorless liquid with an ammonia-like odor. Its lithium derivative, lithium diisopropylamide, known as LDA is a widely used reagent.

<i>n</i>-Butylamine Chemical compound

n-Butylamine is an organic compound (specifically, an amine) with the formula CH3(CH2)3NH2. This colourless liquid is one of the four isomeric amines of butane, the others being sec-butylamine, tert-butylamine, and isobutylamine. It is a liquid having the fishy, ammonia-like odor common to amines. The liquid acquires a yellow color upon storage in air. It is soluble in all organic solvents. Its vapours are heavier than air and it produces toxic oxides of nitrogen during combustion.

References

  1. ↑ National Institute for Occupational Safety and Health (2000). "Morpholine". International Chemical Safety Cards. Retrieved 5 November 2005.
  2. ↑ International Union of Pure and Applied Chemistry (2014). Nomenclature of Organic Chemistry: IUPAC Recommendations and Preferred Names 2013. The Royal Society of Chemistry. p. 142. doi:10.1039/9781849733069. ISBN   978-0-85404-182-4.
  3. 1 2 3 4 5 6 NIOSH Pocket Guide to Chemical Hazards. "#0437". National Institute for Occupational Safety and Health (NIOSH).
  4. ↑ Hall, H. K. (1957). "Correlation of the Base Strengths of Amines1". J. Am. Chem. Soc. 79 (20): 5441–5444. doi:10.1021/ja01577a030.
  5. 1 2 "Morpholine". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  6. ↑ "CDC - NIOSH Pocket Guide to Chemical Hazards - Morpholine". www.cdc.gov. Retrieved 4 January 2022.
  7. ↑ F. Silversmith, Ernest; Nickon, Alex (2013-10-22). Organic Chemistry : Modern Coined Terms and Their Origins. Elsevier Science. p. 313. ISBN   978-1483145235.
  8. ↑ Weissermel, Klaus; Arpe, Hans-Jürgen; Lindley, Charlet R.; Hawkins, Stephen (2003). "Chapter 7. Oxidation Products of Ethylene". Industrial Organic Chemistry. Wiley-VCH. pp. 159–161. ISBN   3-527-30578-5.
  9. ↑ U.S. Patent 3151112, "Process for the preparation of morpholines" van 29 september 1964 aan Jefferson Chemical Company.
  10. ↑ Lindsay Smith, J. R.; McKeer, L. C.; Taylor, J. M. (1993). "4-Chlorination of Electron-Rich Benzenoid Compounds: 2,4-Dichloromethoxybenzene". Organic Syntheses ; Collected Volumes, vol. 8, p. 167.
  11. ↑ Noyori, R.; Yokoyama, K.; Hayakawa, Y. (1988). "Cyclopentenones from α,α′-Dibromoketones and Enamines: 2,5-Dimethyl-3-Phenyl-2-Cyclopenten-1-one". Organic Syntheses ; Collected Volumes, vol. 6, p. 520.
  12. ↑ McGuire, Raymond G.; Dimitroglou, Dimitrios A. (1999). "Evaluation of Shellac and Sucrose Ester Fruit Coating Formulations that Support Biological Control of Post-harvest Grapefruit Decay". Bio-control Science and Technology. 9 (1): 53–65. doi:10.1080/09583159929901.
  13. ↑ "Morpholine". Scientific Analysis Laboratories Ltd. Archived from the original on 2012-04-26.
  14. ↑ "Morpholine Issues in the United Kingdom". Northwest Horticultural Council. September 28, 2010. Archived from the original on April 26, 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.