Related Research Articles
A manual transmission (MT), also known as manual gearbox, standard transmission, or stick shift, is a multi-speed motor vehicle transmission system, where gear changes require the driver to manually select the gears by operating a gear stick and clutch.
The initial design development for the PowerTech V6 and V8 engine family was done by American Motors Corporation (AMC) and debuted in 1998 with credit to Chrysler. This was the first new V8 engine for Chrysler since the 1960s. The companion V6 was basically the V8 with two fewer cylinders, another concept that originated at AMC before the company joined Chrysler. These new engines had nothing in common with the Chrysler A engine V8s, nor the Jeep 4.0 L "PowerTech" I6 engine.
The Chevrolet K5 Blazer is a full-size sport-utility vehicle that was built by General Motors. GM's smallest full-size SUV, it is part of the Chevrolet C/K truck family. Introduced to the Chevrolet line for the 1969 model year, the K5 Blazer was replaced for 1995 by the Chevrolet Tahoe. The third generation was simply called "Chevrolet Blazer", without the K5 name. In 1970, GMC introduced its own model of the truck, called the Jimmy, which was discontinued in 1991 and replaced by the Yukon. The "Jimmy" name was chosen to reflect how GM may sound in a similar manner to how Jeep was thought to be a pronunciation of GP in the competing market. Both were short-wheelbase trucks and available with either rear- or four-wheel drive.
TorqueFlite is the trademarked name of Chrysler Corporation's automatic transmissions, starting with the three-speed unit introduced late in the 1956 model year as a successor to Chrysler's two-speed PowerFlite. In the 1990s, the TorqueFlite name was dropped in favor of alphanumeric designations, although the latest Chrysler eight-speed automatic transmission has revived the name.
Turbo-Hydramatic or Turbo Hydra-Matic is the registered tradename for a family of automatic transmissions developed and produced by General Motors. These transmissions mate a three-element turbine torque converter to a Simpson planetary geartrain, providing three forward speeds plus reverse.
The TREMEC T-5 is a 5-speed manual transmission for longitudinal engine automobiles. It includes one overdrive gear, a lightweight aluminum housing, and adaptability for four wheel drive use. It is currently manufactured by TREMEC.
The 4L60E is a series of automatic transmissions from General Motors. Designed for longitudinal engine configurations, the series includes 4 forward gears and 1 reverse gear. The 4L60E is the electronically commanded evolution of the Turbo-Hydramatic 700R4, originally produced in 1982.
The TREMEC TR-4050 is a 5-speed manual transmission for longitudinal engine rear wheel drive trucks. It includes one overdrive gear and a light-weight aluminum housing. It is manufactured by Transmission Technologies Corporation. New 4wd TR-4050 units are currently available in the United States through any Authorized Tremec Distributor.
The New Venture Gear 4500, colloquially known as NV4500, is a 5-speed manual transmission manufactured by New Venture Gear and used in General Motors and Chrysler products from 1991 to 2007.
The AY-6 is a 6-speed manual transmission manufactured by Aisin. It is designed for longitudinal engine applications and can handle up to 345 ft·lbf (468 N·m) of torque.
The Ultradrive is an automatic transmission manufactured by Chrysler beginning in the 1989 model year.
Vehicles made by American Motors Corporation (AMC) and Jeep incorporated a variety of transmissions and transfer case systems. This article covers transmissions used in the following vehicle models and years:
The Chrysler NSG370 is a six-speed overdrive manual transmission sourced from Mercedes and built in the Stuttgart Transmission Plant. It is Jeep's first six-speed manual transmission and Chrysler's second after the Dodge Viper T-56.
The 10.5" Corporate 14 Bolt Differential is a heavy duty differential found on many 1973-2013 Chevrolet and GMC trucks and SUVs, as well as certain versions of the Cadillac Escalade. Additionally, this differential is found on Chevrolet Express and GMC Savana vans produced from 1973 to current day. Debuting in 1973, this differential is a full floating design with a ring gear diameter of 10.5 inches (270 mm). As the name implies, this differential has 14 bolts holding on the differential cover. The ring gear is not held on with 14 bolts, but rather 12. The 14 bolt differential is a popular axle swap option for Jeep Wrangler owners, and is referred to as the "corporate" 14 bolt because of the odd nature of GM's corporate structure in the 1970s.
The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu. The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans. Its phaseout marks the end of an era of Chevrolet small-block engine designs dating back to the 1955 model year. A new Generation V 4.3 L (262 cu in) V6 variant entered production in late 2013, based on the LT1 small block V8 used in the 2014 Chevrolet Silverado.
The Dana/Spicer Model 60 is an automotive axle manufactured by Dana Holding Corporation and used in OEM pickup and limited passenger car applications by Chevrolet, Dodge, Chrysler, Jeep, Ford and Land Rover. There are front and rear versions of the Dana 60. It can be readily identified by its straight axle tubes, 10 bolt asymmetrical cover, and a "60" cast into the housing. Gross axle weight ratings are often lowered by the vehicle manufacturer for safety and tire reasons. They are also lowered to reduce loads on other powertrain components such as transmissions and transfer cases. Dana 60 Axles are also increasingly swapped into many custom offroad applications to accommodate larger tires and deep compound gearing with locking differentials.
The NV5600 is a Heavy Duty close ratio 6-speed manual transmission that was used in 1999-2005 Dodge RAM 2500 and 3500 Series ¾ ton and 1 ton Trucks with the 5.9L Cummins Engines.
This transmission is part of a joint-venture between Ford Motor Company and General Motors to design and engineer two transmissions, a longitudinal 10-speed transmission and a transverse 9-speed trans-axle. Each company will manufacture its own unique version of the transmissions in their own factories. The 10-speed transmission was designed by Ford, while GM designed the 9-speed transmission which is used in transverse applications.
References
- 1 2 3 4 5 "NV3500 (M50, MG5) Features & Benefits". Archived from the original on 2000-12-14. Retrieved 2008-10-16.
- 1 2 "Domestic Truck Tranny Guide". Archived from the original on 2008-02-20. Retrieved 2008-02-13.
- 1 2 Archived 2006-05-26 at the Wayback Machine
- ↑ "Ram NV3500 Specifications". Dodgeram.org. 2000-02-06. Retrieved 2017-03-07.
- ↑ 1998 Chevrolet and GMC C/K Truck Service Manual 2nd edition Vol.4, 1999 General Motors Corp. All Rights Reserved
- 1 2 3 4 5 "Ram NV3500 Specifications". Dodgeram.org. 2000-02-06. Retrieved 2017-03-07.
- ↑ "NV3500 for Sale, Dodge New Venture Transmission Specs ,M50, MG5". Smartpartsauto.com. Retrieved 2017-03-07.