Nissan Y engine

Last updated
Nissan Y engine
Y44E.jpg
Y44E engine
Overview
Manufacturer Nissan (Nissan Machinery)
Production1965–1989
Layout
Configuration Naturally aspirated V8
Displacement 4.0 L (3,988 cc)
Cylinder bore 92 mm (3.62 in)
Piston stroke 75 mm (2.95 in)
Valvetrain OHV 2 valves x cyl.
Compression ratio 9.0:1
Combustion
Fuel system4-bbl. carburetor
Electronic FI (since 1975)
Fuel type Gasoline
Cooling system Water-cooled
Output
Power output 195–200 bhp (145–149 kW; 198–203 PS)
Torque output 323–343 N⋅m (238–253 lb⋅ft)
Chronology
Successor Nissan VH engine

The Y engine is a family of V8 engines designed and produced by Nissan between 1965 and 1990 for limousines.

Contents

Y40

The Y40 was a water-cooled OHV V8 engine produced for the Nissan President limousine between 1965 and 1973. It displaces 4.0 L (3,988 cc) with a bore and stroke of 92 mm × 75 mm (3.62 in × 2.95 in). It has 16 valves (two per cylinder) and a 4-barrel carburetor and 9.0:1 compression ratio. It produces 195 PS (143 kW; 192 hp) at 5000 rpm and 237 lb⋅ft (321 N⋅m) at 3200 rpm, a high point for Nissan at the time.

This V8 engine was developed before the merger with Prince Motor Company and was not directly related to Prince's W64 V8, used exclusively in the Prince Royal limousine.

This engine was used in the following vehicle(s):

Y44

The Y44 is an OHV V8, 16 valve, 4 barrel down draught carb engine produced for the Nissan President and since 1975 used electronic fuel injection. It produced 200 PS (147 kW; 197 hp) at 4800 rpm and 343 N⋅m (253 lb⋅ft) at 3200 rpm. In 1975, Nissan introduced its emission regulation technology called NAPS (Nissan Anti Pollution System).

This engine was used in the following vehicle(s):

The Nissan Y engine was replaced in 1990 with the Nissan VH engine.

See also


Related Research Articles

The Y-block engine is a family of overhead valve V8 automobile engines produced by Ford Motor Company. The engine is well known and named for its deep skirting, which causes the engine block to resemble a Y. It was introduced in 1954 as a more modern replacement for the outdated side-valved Ford Flathead V8 and was used in a variety of Ford vehicles through 1964.

<span class="mw-page-title-main">Pontiac V8 engine</span> Reciprocating internal combustion engine

The Pontiac V8 engine is a family of overhead valve 90° V8 engines manufactured by the Pontiac Division of General Motors Corporation between 1955 and 1981. The engines feature a cast-iron block and head and two valves per cylinder. Engine block and cylinder heads were cast at Saginaw Metal Casting Operations then assembled at Tonawanda Engine before delivery to Pontiac Assembly for installation.

<span class="mw-page-title-main">Nissan VK engine</span> Reciprocating internal combustion engine

The VK engine is a V8 piston engine from Nissan. It is an aluminum DOHC 4-valve design.

<span class="mw-page-title-main">Nissan VH engine</span> Engine series by Nissan

The VH series consists of 4.1 and 4.5 litres engines built from 1989 to 2001 by the Nissan Motor Corporation. The design consists of a 90-degree V8 with an aluminium cylinder block that features a closed upper deck and a deep skirt. The cylinder heads are also aluminium with a DOHC 4 valves design and pentroof combustion chambers. The production blocks and production head castings were used successfully in various forms of racing including the IRL.

<span class="mw-page-title-main">Nissan VQ engine</span> Reciprocating internal combustion engine

The VQ is a family of V6 automobile petrol engines developed by Nissan and produced in displacements varying from 2.0 L to 4.0 L. Designed to replace the VG series, the all-aluminium 4-valve per cylinder DOHC design debuted with Nissan's EGI/ECCS sequential multi-point fuel injection (MPFI) system. Changes from the VG engine include switching to a timing chain from a timing belt, and relocating the water pump from the outside of the engine to inside the timing cover where the pump is driven by the timing chain. Later versions featured various improvements, such as variable valve timing, and NEO-Di designated VQ engines replace MPFI with direct fuel injection.

<span class="mw-page-title-main">Nissan RB engine</span> Reciprocating internal combustion engine

The RB engine is an oversquare 2.0–3.0 L straight-6 four-stroke gasoline engine from Nissan, originally produced from 1985 to 2004. The RB followed the 1983 VG-series V6 engines to offer a full, modern range in both straight or V layouts.

<span class="mw-page-title-main">Nissan VG engine</span> Reciprocating internal combustion engine

The VG engine is a family of V6 engines designed and produced by Nissan between 1983 and 2004.

<span class="mw-page-title-main">Nissan SR engine</span> Reciprocating internal combustion engine

The SR engine is a series of 1.6 L (1,596 cc), 1.8 L (1,838 cc) or 2.0 L (1,998 cc) straight-four, four-stroke gasoline engines manufactured by Nissan. It has an aluminium head and block with steel sleeves and has a DOHC 4-valve design, with variable valve timing on select models.

<span class="mw-page-title-main">Nissan KA engine</span> Reciprocating internal combustion engine

The KA engines were a series of four-stroke inline-four gasoline piston engines manufactured by Nissan, which were offered in 2.0 and 2.4 L. The engines blocks were made of cast-iron, while the cylinder heads were made of aluminum.

<span class="mw-page-title-main">Nissan GA engine</span> Reciprocating internal combustion engine

The GA engine is a 1.3 to 1.6 L inline-four piston engine from Nissan. It has a cast-iron block and an aluminum head. There are SOHC and DOHC versions, 8, 12, and 16 valve versions, carbureted, single-point, and multi-point injected versions, and versions with variable valve timing (GA16DE). The GA was produced from August 1987 through 2013. Since 1998, it was only available from Mexico in the B13.

<span class="mw-page-title-main">Oldsmobile V8 engine</span> Reciprocating internal combustion engine

The Oldsmobile V8, also referred to as the Rocket, is a series of engines that was produced by Oldsmobile from 1949 until 1990. The Rocket, along with the 1949 Cadillac V8, were the first post-war OHV crossflow cylinder head V8 engines produced by General Motors. Like all other GM divisions, Olds continued building its own V8 engine family for decades, adopting the corporate Chevrolet 350 small-block and Cadillac Northstar engine only in the 1990s. All Oldsmobile V8s were manufactured at plants in Lansing, Michigan while the engine block and cylinder heads were cast at Saginaw Metal Casting Operations.

<span class="mw-page-title-main">Nissan CA engine</span> Reciprocating internal combustion engine

The CA engine is a series of 1.6 to 2.0 L Inline-4 piston engines from Nissan. It is designed for a wide variety of smaller Nissan vehicles to replace the Z engine and some smaller, four-cylinder L series engines. The "CA" stands for Clean Air, due to the installation of Nissan emission reducing technology, called NAPS-X.

<span class="mw-page-title-main">AMC straight-6 engine</span> Series of I6 engines built by American Motors and Chrysler

The AMC straight-6 engine is a family of straight-six engines that were produced by American Motors Corporation (AMC), and used in AMC passenger cars and Jeep vehicles from 1964 through 2006. Production continued by Chrysler after it acquired AMC in 1987.

<span class="mw-page-title-main">Nissan E engine</span> Type of automobile engine

The Nissan E series name was used on two types of automobile engines. The first was an OHV line used in the late 1950s and throughout the 1960s. The second was an OHC version ranging from 1.0 to 1.6 litres and was produced from 1981 till 1988. It was replaced by the GA engine series.

The Nissan H series of automobile engines is an evolution of the Nissan "R" engine which was based on the 1.5-liter, three-main bearing "G" engine used in the 1960s. Both inline-four and inline-six versions were produced. It is a pushrod OHV design with iron block, early models with an iron head, later models with aluminum head. Versions of this motor have been used in many Nissan autos and forklifts, well into the eighties and a version called H20II was in production until 2003. The SD diesels are based on this series of motors

<span class="mw-page-title-main">Nissan L engine</span> Reciprocating internal combustion engine

The Nissan L series of automobile engines was produced from 1966 through 1986 in both inline-four and inline-six configurations ranging from 1.3 L to 2.8 L. It is a two-valves per cylinder SOHC non-crossflow engine, with an iron block and an aluminium head. It was the engine of the Datsun 510, Datsun 240Z sports car, and the Nissan Maxima. These engines are known for their reliability, durability, and parts interchangeability.

<span class="mw-page-title-main">Prince G engine</span> Reciprocating internal combustion engine

The Prince G-series engine was the company's only straight-four and straight-six engines which began production in 1955. A number of variations were made, with both OHV and OHC heads. A diesel four-cylinder with 1.9 L (1,862 cc) was also built, called the D-6. The G series was used in the Skyline, the Laurel, and the Gloria from the 1950s to the early 1970s.

<span class="mw-page-title-main">Nissan MR engine</span> Kind of engine made by Nissan

The Renault-Nissan MR engine family consists of straight-four 16-valve all-aluminium and water cooled automobile engines with variable valve timing co-developed by Renault and Nissan. Renault calls it the M engine. Other noteworthy features of this engine family include acoustically equal runner lengths and a tumble control valve for the intake manifold, a "silent" timing chain, mirror finished crankshaft and camshaft journals, and offset cylinder placement in an attempt for increased efficiency.

The Nissan TB straight-six petrol engine was released in 1987 as the TB42. Bore and stroke were 96 mm × 96 mm. Cubic capacity was 4,169 cc displacement). The engine was released with a two-barrel carburettor and a point type distributor. It was used in the Nissan Patrol Y60 and Y61 series.

<span class="mw-page-title-main">Nissan W64 engine</span> Reciprocating internal combustion engine

The W64 is a 6.4L V8 piston engine from Nissan. It was originally developed by the Prince Motor Company for use in the Prince Royal limousine, a limousine made for the Imperial Household of Japan.