Open Hardware and Design Alliance

Last updated
Logo of the Open Hardware and Design Alliance (OHANDA) OHANDA logo.svg
Logo of the Open Hardware and Design Alliance (OHANDA)

NOTE: This organization doesn't seem to exist anymore, the http://www.ohanda.org/ URL has been found to be inactive in January 2023.

Contents

The Open Hardware and Design Alliance (OHANDA) aims at encouraging the sharing of open hardware and designs. The core of the project is a free online service where manufacturers of Open hardware and designs can register their products with a common label. This label maps the four freedoms of Free Software to physical devices and their documentation. It is similar to a non-registered trademark for hardware and can be compared to other certificates such as U.S. Federal Communications Commission (FCC) or CE mark. OHANDA thus has the role of a self-organized registration authority.

License

The Open Hardware and Design Alliance has rewritten the four freedoms of free software as follows to match them to hardware resp. hardware documentation:

  1. Freedom 0: The freedom to use the device for any purpose.
  2. Freedom 1: The freedom to study how the device works and change it to make it to do what you wish. Access to the complete design is precondition to this.
  3. Freedom 2: Redistribute the device and/or design (remanufacture).
  4. Freedom 3: The freedom to improve the device and/or design, and release your improvements (and modified versions in general) to the public, so that the whole community benefits. Access to the complete design is precondition to this.

The idea to create a label that makes open hardware and designs recognizable is because copyright and copyleft are hard to realize in the context of physical devices. Instead of going through the lengthy and expensive process of patenting hardware to make it open, hardware developers and designers can put their products under a public domain license by registering them on the OHANDA website. They can license their work under their own names and keep the devices' reuse open.

The procedure is the following: A hardware designer or manufacturer creates an account on the OHANDA website to get a unique producer ID. This account can either be for a person or for an organization. The terms and conditions he accepts to use the label imply that she grants the Four Freedoms to the users. The documentation of the product must be published under a "copyleft" or public domain license. Next, the manufacturer registers the product or design. A unique product ID will be issued. This ID is also referred to as the "OKEY". Now the manufacturer or designer can print or engrave the OHANDA label and the OKEY onto the device. This way, the device always carries the link to the open documentation and to all past contributors. Via the OHANDA website, users can trace back the artefact. At the same time, the label makes the openness of the product visible. Everyone is free to change the device and to share the new design with a new product ID on the website. The development can be seen by following the associations online. [1]

Development

The idea of creating a label for open source hardware came up at the GOSH! Summit (Grounding Open Source Hardware) at Banff Centre in Banff, Alberta in July 2009. [2] Since then, the active community members developed the project website [3] where OHANDA-labeled hardware can be registered. OHANDA launched a sticker campaign: The stickers show a crossed out closed box, symbolizing closed "black boxes". The stickers are meant to be put on all sorts of devices to make visible how little open source devices exist.

In 2011, OHANDA community members met at the Piksel11 festival in Bergen/Norway. [4] Since then, they have been using the term "reables" as a replacement for "Free/Libre Open Source Hardware". [5]

See also

Related Research Articles

<span class="mw-page-title-main">Free software</span> Software licensed to be freely used, modified and distributed

Free software, libre software, or libreware is computer software distributed under terms that allow users to run the software for any purpose as well as to study, change, and distribute it and any adapted versions. Free software is a matter of liberty, not price; all users are legally free to do what they want with their copies of a free software regardless of how much is paid to obtain the program. Computer programs are deemed "free" if they give end-users ultimate control over the software and, subsequently, over their devices.

<span class="mw-page-title-main">Open-design movement</span> Movement for product development with publicly shared designs

The open-design movement involves the development of physical products, machines and systems through use of publicly shared design information. This includes the making of both free and open-source software (FOSS) as well as open-source hardware. The process is generally facilitated by the Internet and often performed without monetary compensation. The goals and philosophy of the movement are identical to that of the open-source movement, but are implemented for the development of physical products rather than software. Open design is a form of co-creation, where the final product is designed by the users, rather than an external stakeholder such as a private company.

<span class="mw-page-title-main">Open-source hardware</span> Hardware from the open-design movement

Open-source hardware (OSH) consists of physical artifacts of technology designed and offered by the open-design movement. Both free and open-source software (FOSS) and open-source hardware are created by this open-source culture movement and apply a like concept to a variety of components. It is sometimes, thus, referred to as FOSH. The term usually means that information about the hardware is easily discerned so that others can make it – coupling it closely to the maker movement. Hardware design, in addition to the software that drives the hardware, are all released under free/libre terms. The original sharer gains feedback and potentially improvements on the design from the FOSH community. There is now significant evidence that such sharing can drive a high return on investment for the scientific community.

<span class="mw-page-title-main">Free and open-source software</span> Software whose source code is available and which is permissively licensed

Free and open-source software (FOSS) is a term used to refer to groups of software consisting of both free software and open-source software, where anyone is freely licensed to use, copy, study, and change the software in any way, and the source code is publicly available so that people are encouraged to improve the design of the software. This is in contrast to proprietary software, where the software is under restrictive copyright or licensing and the source code is hidden from the users.

<span class="mw-page-title-main">Linux-powered device</span>

Linux-based devices or Linux devices are computer appliances that are powered by the Linux kernel and possibly parts of the GNU operating system. Device manufacturers' reasons to use Linux may be various: low cost, security, stability, scalability or customizability. Many original equipment manufacturers use free and open source software to brand their products. Community maintained Linux devices are also available.

In the context of free and open-source software, proprietary software only available as a binary executable is referred to as a blob or binary blob. The term usually refers to a device driver module loaded into the kernel of an open-source operating system, and is sometimes also applied to code running outside the kernel, such as system firmware images, microcode updates, or userland programs. The term blob was first used in database management systems to describe a collection of binary data stored as a single entity.

<span class="mw-page-title-main">Linux</span> Family of Unix-like operating systems

Linux is a family of open-source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991, by Linus Torvalds. Linux is typically packaged as a Linux distribution (distro), which includes the kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses and recommends the name "GNU/Linux" to emphasize the use and importance of GNU software in many distributions, causing some controversy.

ONE-NET is an open-source standard for wireless networking. ONE-NET was designed for low-cost, low-power (battery-operated) control networks for applications such as home automation, security & monitoring, device control, and sensor networks. ONE-NET is not tied to any proprietary hardware or software, and can be implemented with a variety of low-cost off-the-shelf radio transceivers and micro controllers from a number of different manufacturers.

<span class="mw-page-title-main">Free-software license</span> License allowing software modification and redistribution

A free-software license is a notice that grants the recipient of a piece of software extensive rights to modify and redistribute that software. These actions are usually prohibited by copyright law, but the rights-holder of a piece of software can remove these restrictions by accompanying the software with a software license which grants the recipient these rights. Software using such a license is free software as conferred by the copyright holder. Free-software licenses are applied to software in source code and also binary object-code form, as the copyright law recognizes both forms.

<span class="mw-page-title-main">Copyleft</span> Practice of mandating free use in all derivatives of a work

Copyleft is the legal technique of granting certain freedoms over copies of copyrighted works with the requirement that the same rights be preserved in derivative works. In this sense, freedoms refers to the use of the work for any purpose, and the ability to modify, copy, share, and redistribute the work, with or without a fee. Licenses which implement copyleft can be used to maintain copyright conditions for works ranging from computer software, to documents, art, scientific discoveries and even certain patents.

Proprietary software is software that, according to the free and open-source software community, grants its creator, publisher, or other rightsholder or rightsholder partner a legal monopoly by modern copyright and intellectual property law to exclude the recipient from freely sharing the software or modifying it, and—in some cases, as is the case with some patent-encumbered and EULA-bound software—from making use of the software on their own, thereby restricting their freedoms.

<span class="mw-page-title-main">GNU General Public License</span> Series of free software licenses

The GNU General Public License is a series of widely used free software licenses or copyleft that guarantee end users the four freedoms to run, study, share, and modify the software. The license was the first copyleft for general use and was originally written by Richard Stallman, the founder of the Free Software Foundation (FSF), for the GNU Project. The license grants the recipients of a computer program the rights of the Free Software Definition. These GPL series are all copyleft licenses, which means that any derivative work must be distributed under the same or equivalent license terms. It is more restrictive than the Lesser General Public License and even further distinct from the more widely used permissive software licenses BSD, MIT, and Apache.

<span class="mw-page-title-main">Qi Hardware</span>

Qi Hardware is an organization which produces copyleft hardware and software, in an attempt to apply the Free Software Foundation's GNU GPL concept of copylefting software to the hardware layer by using the CC BY-SA license for schematics, bill of materials and PCB layout data. The project has been both a community of popular open hardware websites and a company, founded by Steve Mosher, Jon Phillips, Wolfgang Spraul and Yi Zhang, that makes hardware products. Formed from the now defunct Openmoko project, key members went on to form Qi Hardware Inc. and Sharism At Work Ltd. Thus far, the project has released the Ben Nanonote, the Milkymist One, and the Ben WPAN wireless project to create a copyleft wireless platform. The examples of Qi hardware projects are the Ben NanoNote pocket computer, Elphel 353 video camera and Milkymist One video synthesizer.

Software categories are groups of software. They allow software to be understood in terms of those categories, instead of the particularities of each package. Different classification schemes consider different aspects of software.

<span class="mw-page-title-main">Ben NanoNote</span>

The Ben NanoNote is a pocket computer using the Linux-based OpenWrt operating system. An open-source hardware device developed by Qi Hardware, it has been called possibly "the world's smallest Linux laptop for the traditional definition of the word.". In addition, the Ben NanoNote is noteworthy for being one of the few devices on the market running entirely on copyleft hardware.

<span class="mw-page-title-main">Sailfish OS</span> Mobile operating system

Sailfish OS is a Linux-based operating system based on free software, and open source projects such as Mer as well as including a closed source UI. The project is being developed by the Finnish company Jolla.

AllJoyn is an open source software framework that allows compatible devices and applications to find each other, communicate and collaborate across the boundaries of product category, platform, brand, and connection type. Originally the AllSeen Alliance promoted the project, from 2013 until 2016 when the alliance merged with the Open Connectivity Foundation (OCF). In 2018 the source code became hosted by GitHub.

Open source is source code that is made freely available for possible modification and redistribution. Products include permission to use the source code, design documents, or content of the product. The open-source model is a decentralized software development model that encourages open collaboration. A main principle of open-source software development is peer production, with products such as source code, blueprints, and documentation freely available to the public. The open-source movement in software began as a response to the limitations of proprietary code. The model is used for projects such as in open-source appropriate technology, and open-source drug discovery.

References

  1. "OHANDA / JÜRGEN NEUMANN | Open Design Now".
  2. "Programs | Banff Centre".
  3. "4xFreedoms | Open Source Hardware and Design Alliance". Archived from the original on 2012-11-05. Retrieved 2012-11-24.
  4. http://piksel.no/ocs/index.php/piksel/piksel11/paper/view/777 [ dead link ]
  5. http://www.ohanda.org/reables