Open chord

Last updated
G major chord for guitar (open). G major chord for guitar (open).png
G major chord for guitar (open).
Violoncello chord on C Play (help*info)
. Bottom two strings are open. Violoncello chord on C.png
Violoncello chord on C Loudspeaker.svg Play  . Bottom two strings are open.

In music for stringed instruments, especially guitar, an open chord (open-position chord) is a chord that includes one or more strings that are not fingered. An open string vibrates freely, whereas a fingered string will be partially dampened unless fingered with considerable pressure, which is difficult for beginner players. In an open chord, the unfingered strings are undampened, and the player is able to exert maximum pressure on the fretted strings, to avoid unwanted dampening. On a regular six-string guitar, an open chord can have from one to six open strings sounding. In contrast, all of the strings are fingered for a barre chord, which requires greater technique to be allowed to ring freely. To dampen a barre chord, a player simply needs to relax the fingers. Fully dampening an open chord requires the player to roll the fingers of the left hand over the open strings, or else dampen with the right hand.

Contents

Guitarists use capos, which are devices that clamp down the strings to create a movable nut, to play open chords in different keys. With a capo on the first fret, the guitarist can finger the shape of the open A minor chord, but the result will be a B minor chord. Open chords on guitar are used in a wide range of popular music and traditional music styles.

Cowboy chords

In guitar music, open chords are also called cowboy chords owing to their simplicity and reminiscence of a "cowboy strummin' away on the prairie." [1]

Advanced open chords

Advanced guitar chords may rely on the use of open strings alongside strings fretted in higher positions. For example fretting the E-barre shape on the fifth fret without the barre allows the open E, A and E to ring alongside the higher position E, A and C#. The strumming on the middle section of "Stairway to Heaven" is played using such chords. Chord books are available including such chords, but many guitarists experiment to form their own distinctive chords. [2]

Other strings

When composers instruct string section players (violin, viola, cello, double bass) to play double stops (two notes at once) or triple stops (three notes at once), they often include one or two open strings in the chord voicing, unless they are writing for a virtuoso soloist. When writing for amateur or youth ensembles, composers typically use open strings to form double stops; in this fashion, the player only has to "stop" one note. Using open strings in double stops and triple stops also improves the resonance and sustain of the chord, because open strings ring more fully and longer than "stopped" strings.

See also

Related Research Articles

Classical guitar Member of the guitar family used in classical music

The classical guitar is a member of the guitar family used in classical music and other styles. An acoustic wooden string instrument with strings made of gut or nylon, it is a precursor of the modern acoustic and electric guitars, both of which use metal strings. Classical guitars derive from the Spanish vihuela and gittern of the fifteenth and sixteenth century. Those instruments evolved into the seventeenth and eighteenth-century baroque guitar—and by the mid-nineteenth century, early forms of the modern classical guitar.

Guitar Fretted string instrument

The guitar is a fretted musical instrument that typically has six strings. It is held flat against the player's body and played by strumming or plucking the strings with the dominant hand, while simultaneously pressing selected strings against frets with the fingers of the opposite hand. A plectrum or individual finger picks may also be used to strike the strings. The sound of the guitar is projected either acoustically, by means of a resonant chamber on the instrument, or amplified by an electronic pickup and an amplifier.

Sweep picking

Sweep picking is a guitar playing technique. When sweep picking, the guitarist plays single notes on consecutive strings with a 'sweeping' motion of the pick, while using the fretting hand to produce a specific series of notes that are fast and fluid in sound. Both hands essentially perform an integral motion in unison to achieve the desired effect.

Power chord Type of guitar chord

A power chordPlay  is a colloquial name for a chord in guitar music, especially electric guitar, that consists of the root note and the fifth, as well as possibly octaves of those notes. Power chords are commonly played on amplified guitars, especially on electric guitar with intentionally added distortion or overdrive effects. Power chords are a key element of many styles of rock, especially heavy metal and punk rock.

Fret Bar across the neck of stringed instruments

A fret is any of the thin strips of material, usually metal wire, inserted laterally at specific positions along the neck or fretboard of a stringed instrument. Frets usually extend across the full width of the neck. On some historical instruments and non-European instruments, frets are made of pieces of string tied around the neck.

Capo (musical device) Common tool for players of guitars and other stringed instruments

A capo is a device a musician uses on the neck of a stringed instrument to transpose and shorten the playable length of the strings—hence raising the pitch. It is a common tool for players of guitars, mandolins, mandolas, banjos, ukuleles and bouzoukis. The word derives from the Italian capotasto, which means the nut of a stringed instrument. The earliest known use of capotasto is by Giovanni Battista Doni who, in his Annotazioni of 1640, uses it to describe the nut of a viola da gamba. The first patented capo was designed by James Ashborn of Wolcottville, Connecticut year 1850.

The fingerboard is an important component of most stringed instruments. It is a thin, long strip of material, usually wood, that is laminated to the front of the neck of an instrument. The strings run over the fingerboard, between the nut and bridge. To play the instrument, a musician presses strings down to the fingerboard to change the vibrating length, changing the pitch. This is called stopping the strings. Depending on the instrument and the style of music, the musician may pluck, strum or bow one or more strings with the hand that is not fretting the notes. On some instruments, notes can be sounded by the fretting hand alone, such as with hammer ons, an electric guitar technique.

Drop D tuning

Drop D tuning is an alternative form of guitar tuning in which the lowest (sixth) string is tuned down from the usual E of standard tuning by one whole step to D. So where standard tuning is E2A2D3G3B3E4 (EADGBe), drop D is D2A2D3G3B3E4 (DADGBe). Drop D tuning, as well as other lowered altered tunings, are often used with the electric guitar in heavy metal music. It is also used in blues, country, folk (often with acoustic guitar), and classical guitar.

Fingerstyle guitar Playing technique

Fingerstyle guitar is the technique of playing the guitar or bass guitar by plucking the strings directly with the fingertips, fingernails, or picks attached to fingers, as opposed to flatpicking. The term "fingerstyle" is something of a misnomer, since it is present in several different genres and styles of music—but mostly, because it involves a completely different technique, not just a "style" of playing, especially for the guitarist's picking/plucking hand. The term is often used synonymously with fingerpicking except in classical guitar circles, although fingerpicking can also refer to a specific tradition of folk, blues and country guitar playing in the US. The terms "fingerstyle" and "fingerpicking" also applied to similar string instruments such as the banjo.

Barre chord Guitar performance technique

In music, a barre chord is a type of chord on a guitar or other stringed instrument played by using one or more fingers to press down multiple strings across a single fret of the fingerboard.

Guitar chord

In music, a guitar chord is a set of notes played on a guitar. A chord's notes are often played simultaneously, but they can be played sequentially in an arpeggio. The implementation of guitar chords depends on the guitar tuning. Most guitars used in popular music have six strings with the "standard" tuning of the Spanish classical guitar, namely E–A–D–G–B–E' ; in standard tuning, the intervals present among adjacent strings are perfect fourths except for the major third (G,B). Standard tuning requires four chord-shapes for the major triads.

Guitar tunings Adjusting pitches of guitar strings

Guitar tunings are the assignment of pitches to the open strings of guitars, including acoustic guitars, electric guitars, and classical guitars. Tunings are described by the particular pitches that are made by notes in Western music. By convention, the notes are ordered and arranged from the lowest-pitched string to the highest-pitched string, or the thickest string to thinnest, or the lowest frequency to the highest. This sometimes confuses beginner guitarists, since the highest-pitched string is referred to as the 1st string, and the lowest-pitched is the 6th string.

A nut, on a stringed musical instrument, is a small piece of hard material that supports the strings at the end closest to the headstock or scroll. The nut marks one end of the vibrating length of each open string, sets the spacing of the strings across the neck, and usually holds the strings at the proper height from the fingerboard. Along with the bridge, the nut defines the scale lengths of the open strings.

Outline of guitars Overview of and topical guide to guitars

The following outline is provided as an overview of and topical guide to guitars:

Finger vibrato is vibrato produced on a string instrument by cyclic hand movements. Despite the name, normally the entire hand moves, and sometimes the entire upper arm. It can also refer to vibrato on some woodwind instruments, achieved by lowering one or more fingers over one of the uncovered holes in a trill-like manner. This flattens the note periodically creating the vibrato.

Classical guitar technique

In classical guitar, the right hand is developed in such a way that it can sustain two, three, and four voice harmonies while also paying special attention to tone production. The index (i), middle (m), and ring (a) fingers are generally used to play the melody, while the thumb (p) accompanies in the bass register adding harmony, and produces a comparable texture and effect to that of the piano. The classical guitar is a solo polyphonic instrument, and it is difficult to master.

Flamenco guitar Acoustic guitar used in Flamenco music

A flamenco guitar is a guitar similar to a classical guitar but with thinner tops and less internal bracing. It usually has nylon strings, like the classical guitar, but it generally possesses a livelier, more gritty sound compared to the classical guitar. It is used in toque, the guitar-playing part of the art of flamenco.

Partial capo Musical device to fret only certain strings

A partial capo is a type of a capo designed to capo only some of the strings of an instrument, as opposed to a standard capo which affects all strings.

Guitar picking

Guitar picking is a group of hand and finger techniques a guitarist uses to set guitar strings in motion to produce audible notes. These techniques involve plucking, strumming, brushing, etc. Picking can be done with:

Damping is a technique in music for altering the sound of a musical instrument by reducing oscillations or vibrations. Damping methods are used for a number of instruments.

References

  1. Koch, Greg (2004). Hal Leonard Country Guitar Method. p. 6. ISBN   0-634-03949-0.
  2. Gress, Jesse (2001). The Guitar Cookbook. p. 128. ISBN   0-87930-633-5.