 |
 | This article needs additional citations for verification .(August 2014) |
| Osprey body armour | |
|---|---|
 Osprey Mk 2 body armour next to an L85A2 rifle. | |
| Type | Body armor |
| Place of origin | United Kingdom |
| Production history | |
| Manufacturer | CQC Limited. |
| Variants | See Variants |
Osprey body armour is a system of body armour used by the British Armed Forces. The system is in its fourth iteration following extensive development and engagement with front line users.
British forces first began using body armour on a widespread basis when combatting terrorist activities in Northern Ireland during Operation Banner, [1] with this initially consisting of M52 and M69 flak vests and then the Individual Northern Ireland Body Armour vest which could be worn under the combat jacket. [2] A vest known as Combat Body Armour was introduced for general issue outside of Northern Ireland in the 1980s, [3] but consisted purely of soft body armour since the focus was on preventing injury from fragments generated by explosive blasts. [4]
A later version known as Enhanced Combat Body Armour (ECBA) was developed in 1991 and allowed for the soft body armour to be augmented with ceramic hard armour plates for improved ballistic protection, [5] but the small size of these plates meant that only the upper torso was protected.
Following lessons identified in Iraq by both British and US forces, including the death of Sergeant Steven Roberts, the Osprey armour system was released in 2006 for general use. It has subsequently been subject to modification, with a fourth version being issued to personnel serving in Afghanistan on Operation Herrick in 2010.
In response to lessons learned in combat, the British Army developed the Virtus personal armour system that offers the same protection as Osprey, but is significantly lighter, moves with the body more easily, and produces a slimmer profile. Virtus is 4.7 kg (10 lb 6 oz) lighter, and will be even lighter once new armour plates in development are introduced. The level of protection can be increased or decreased depending on the threat environment by adding or removing soft armour pads and hard ballistic plates.
Unlike the Osprey's Velcro straps, the Virtus has a chest-positioned pin quick-release mechanism that releases the entire body kit when pulled for safe extraction in hazardous situations. A new, lighter helmet provides increased blunt impact protection, face and mandible guards for certain roles, and a shape designed to work with the armour and daysack so weapons can be comfortably used even in a prone position; it has a permanent universal mount for night vision gear and a scalable counterweight attached to the rear to ease strain on the wearer's neck.
The system also eases strain on loads the soldier would be carrying, incorporating the dynamic weight distribution (DWD) integral spine system, which is linked to the waist belt and helps spread the load of the body armour or daysac across the back, shoulders, and hips, which can be adjusted through a hand controller to their preference. [6]
Virtus was officially issued in May 2016. [7]
The body armour system is designed and manufactured by CQC Ltd, a long-standing UK-based manufacturer that has provided various items for the Ministry of Defence, [8] with some additional batches produced by Solo International Ltd. [9] The Osprey system is modular and built around two vest halves which, when assembled, cover the wearer's torso. The vest has Pouch Attachment Ladder System-type webbing loops stitched to the outside to act as attachment points for compatible pouches and accessories, removing the need to wear a webbing harness or assault vest over the armour (though a "Load Carrying Tactical Vest" was issued with early iterations of the armour). A grab handle on the rear of the vest allows an injured wearer to be dragged behind cover by their comrades. Fastex buckles on the vest may be used for the fitting of a hydration bladder or a [[Personal Load Carrying Equipment[[ (PLCE) daysack pouch on the rear and a respirator haversack on the bottom left, [10] and there is also provision for attaching a rank slide to the vest. [11]
The body armour consists of front and rear soft armour panels, which are inserted into the vest (preferably after the hard armour plates have been added) and secured with the aid of Velcro hook and loop fasteners, and front and rear ceramic hard armour plates which are inserted into dedicated pockets (external pockets on Mk 1 to Mk 3A vests, internal pockets on Mk 4 and Mk 4A vests) and protected by a rubber-edged cover intended to avoid wear and tear in routine use. These plates are of sufficient size to cover both the upper and lower torso. The smaller hard armour plates that were used with Enhanced Combat Body Armour [12] are inserted into side pockets (integral to Mk 1, Mk 2, Mk 3, and Mk 3A vests, integrated into cummerbunds issued with Mk 4 vest) or dedicated side pouches (Mk 4A vest) for additional lower torso protection, though they can also be used as an alternative to the larger Osprey front and rear armour plates, with the relevant pockets being located in the same place as those for the Osprey-specific plates. [13] Optional collar attachments (available in half and full versions) and arm protectors (consisting of brassards and shoulder guards), each with their own soft armour fillers, provide further protection; an Osprey vest thus configured is referred to as 'Complete Fighting Order', but normally the vest is worn in 'Light Fighting Order' without the addition of collar and arm protection. [14] [15]
The armour system is not currently issued to personnel stationed in the UK, and instead retained in theatre and issued to troops during inward processing. Training is undertaken using earlier versions of Osprey.
The Osprey Body Armour is complemented by the Under Body Armour Combat Shirt (UBACS), but can be worn over the CS95 and PCS jacket. The UBACS torso is made of wicking CoolMax fabric with soft protection in the shoulders and sleeves.
The pouch system consists of a range of accessories that can be fitted to the vest, allowing an easily configurable load carrying capability that can be tailored to the needs of the individual user. This includes a range of magazine, machine gun link, hand grenade, and 40x46mm pouches as well as utility pouches and medical packs. These accessories are mounted using the PALS tape and can also be fitted to any other equipment with this arrangement, such as the issued MTP 45 litre patrol daysack [NSN: 8465-99-213-3777].
Soldiers were discouraged from carrying items such as bayonets, pens, or cyalume torches on the front of the Osprey vest in order to prevent facial injury in the event of a blast. [16] The combined weight of the Osprey vest, the body armour carried within the vest, and pouches attached to the vest meant that some wearers went back to using the earlier PLCE webbing. [17]
Large ballistic plates at the front and back with the assembly as described, offering significant improvements over the protection offered by the preceding Enhanced Combat Body Armour.
This version was first issued in 2007. The vest was improved by the use of modified pouches, a drop sling attachment on the shoulder to support an L85A2 rifle in lieu of the standard L85A2 sling, and improved construction quality. The press studs were modified so that they could only be undone in one direction (as opposed to the multi-directional studs of the Mk 1 vest). A waist cummerbund belt was introduced to improve the fit and comfort of the vest. This version also saw the introduction of separately fitted arm and collar protection.
Improvements to the armour included the addition of a more robust right hand shoulder assembly and a non-slip shoulder pad for improved aiming of weapon systems. An Mk 3 A version was issued with studs on the plate pockets to better secure the hard armour plates and retaining straps over the side panels to reduce instances of the velcro opening when under stress. [18] This had been mitigated in earlier vests by the use of a bungee cord around the armour, hooked to the PALS webbing. The vest was mostly produced in Desert Disruptive Pattern Material camouflage, though versions in an experimental multi-terrain version of Disruptive Pattern Material developed during PECOC were also fielded [19] and limited production was undertaken of a version in regular Disruptive Pattern Material. [20]
Developed by June 2009 and introduced in April 2010, Osprey Assault Mk 4 body armour (later simplified to Osprey Mk 4 body armour) was made available in Desert Disruptive Pattern Material camouflage, a solid tan colour, [21] and the new Multi-Terrain camouflage, though an olive version was demonstrated in 2010 [22] and CQC offers a closely related 'Rhino' body armour set in regular Disruptive Pattern Material camouflage. [23] Modifications were made to the velcro coverage to improve fastening security and soldiers were given a choice between an OPS panel with adjustable T Bar fittings and a pair of cummerbunds fitted with adjustable front webbing straps and featuring pockets for side hard armour plates. Finally, the most striking change when compared to previous iterations is that the front and rear hard armour plates are now carried internally rather than in an external pocket; combined with the plates being made thinner without reducing effectiveness, this means that the Mk 4 vest provides the same ballistic protection as earlier Osprey vests while being more comfortable to wear, closer fitting, and easier to move in. A ribbed material lining on the inside of the vest improves breathability in hotter climates such as that of Afghanistan. The Mk 4 vest has a higher number of webbing loops and the pouch assortment was increased to twenty-three, with additions including a "commander's pouch" for holding stationery and open SA80 magazine pouches with elastic draw-cords for easier access to ammunition. [24]
A modified version of the Mk 4, known as the Mk 4A, eliminated the outer cummerbund and replaced it with pouches for carrying the side armour plates. This gave a further weight reduction and allowed for more flexibility when positioning the side plates; it also allowed the OPS panel to be worn along with the side plates. The basic design of the main vest and the armour inserts was unaltered. [25] By 2015, over 76,000 Mk 4 and 35,000 Mk 4A vests had been manufactured for British Armed Forces use. [26]
Each generation of Osprey has been subjected to some form of criticism from users and journalists. Initial criticisms of the first generation were related to the significant increase in weight, and size of the ballistic plates, compared with the existing ECBA.[ citation needed ] The quality of the manufacture of versions 1 and 2 has been criticised with reports of seams and fasteners tearing open in normal use.[ citation needed ] First generation pouches were criticised for poor stability on the cover, with some infantry identifying that pouches designed to hold two magazines did not securely hold three, [ citation needed ] and that the scale of issue was inadequate to hold a standard patrol ammunition load of six magazines.
A bulletproof vest, also known as a ballistic vest or a bullet-resistant vest, is an item of body armour that helps absorb the impact and reduce or stop penetration to the torso by firearm-fired projectiles and fragmentation from explosions. The vest may come in a soft form, as worn by many police officers, prison officers, security guards, and some private citizens, used to protect against stabbing attacks or light projectiles, or hard form, using metallic or para-aramid components. Soldiers and police tactical units wear hard armour, either in conjunction with soft armour or alone, to protect against rifle ammunition or fragmentation.
Modular Lightweight Load-carrying Equipment, or MOLLE, is the current generation of load-bearing equipment and backpacks used by a number of NATO armed forces, especially the British Army and the United States Army.
Personnel Armor System for Ground Troops is a combat helmet and ballistic vest that was used by the United States military from the early 1980s until the mid-2000s, when the helmet and vest were succeeded by the Lightweight Helmet (LWH), Modular Integrated Communications Helmet (MICH), and Interceptor Body Armor (IBA) respectively.
Personal Load Carrying Equipment (PLCE) is one of several tactical webbing systems of the British Armed Forces. Dependent upon the year of design, and the decade of introduction, the webbing system was named and is commonly referred to as the 85 Pattern, the 90 Pattern or the 95 Pattern webbing.
Disruptive Pattern Camouflage Uniform (DPCU), also nicknamed Auscam, jelly bean camo, or hearts and bunnies is a five-colour military camouflage pattern used by the Australian Defence Force. Replacing the jungle greens used from WWII, it was developed and tested during the late 1970s and early 1980s. The uniform was trialled in 1987, with it being slowly introduced in late 1989, with the last production and discontinuation of the jungle greens being in late 1990. Jungle greens were last issued in late 1991 for Australian Regular Army, and late 1994 for Australian Army Reserve.
The IIFS was introduced in 1988, to serve as a fighting and existence carrying system—a possible replacement for the All-purpose Lightweight Individual Carrying Equipment employed and fielded by United States Armed Forces since 1973.
The Modular Tactical Vest is a ballistic vest originally adopted by the United States Marine Corps in 2006. The MTV was designed as a solution to shortcomings in the Interceptor Body Armor (IBA) and was selected after a rigorous proposal and examination process by the Marine Corps. The MTV provides better protection levels than the IBA, although it uses the same Small Arms Protective Insert (SAPI) plates. The MTV weighs 30 pounds (14 kg), three pounds more than the IBA, but is designed to more effectively distribute its weight throughout the wearer's torso.
CIRAS is a modular protective vest designed for US Special Operations Forces by Eagle Industries. The vest is currently the new FSBE II system and has replaced the FSBE AAVs. It features PALS webbing, making it MOLLE-compatible and allowing the attachment of various pouches or accessories. Two versions of the vest are available, known as the "land" and "maritime" versions. The vest consists of front and rear panels with pockets for BALCS or SPEAR-cut soft armor panels and standard-issue SAPI plates. This gives the wearer up to NIJ Level IV protection on the front and back and Level IIIA protection on the sides. On the lower rear side of the front of the vest, there are two quick-releasable buckles for attaching groin protection. The wearer's sides are covered by an external cummerbund, which is also covered with PALS webbing. The vest body is constructed of 1000-denier Cordura Nylon, and the interior is lined with heavy-duty mesh to aid in cooling the wearer.
1958 Pattern Web Equipment was a modular personal equipment system issued to the British Armed Forces from 1959 up until the mid 90s. It replaced the 1937 Pattern Web Equipment that had served the UK's Armed Forces through the Second World War and the first decade of the Cold War and also the 1944 pattern Webbing which was used in jungle conditions starting from the mid-1960s.
The Improved Outer Tactical Vest (IOTV) is an enhanced version of, and a replacement for, the older Outer Tactical Vest (OTV) component of the Interceptor Multi-Threat Body Armor System, as fielded by the United States Army beginning in the mid-2000s. The IOTV is compatible with the Deltoid and Axillary Protector System (DAPS) components, ESAPI, Enhanced Side Ballistic Inserts (ESBI), as well as the OTV's groin protector. It has a flame-resistant standalone shirt, the Army Combat Shirt (ACS), designed specifically for use with the IOTV.
The Pouch Attachment Ladder System or PALS is a grid of webbing invented and patented by United States Army Natick Soldier Research, Development and Engineering Center used to attach smaller equipment onto load-bearing platforms, such as vests and backpacks. It was first used on MOLLE rucksacks, but is now found on a variety of tactical equipment, such as the U.S. Improved Outer Tactical Vest, Interceptor body armor, USMC Improved Load Bearing Equipment backpack and Modular Tactical Vest. It is used to attach items such as holsters, magazine pouches, radio pouches, knife sheathes, and other gear. A wide variety of pouches are commercially available, allowing soldiers to customize their kit. There is also a variety of attachment methods including the Alice Clip, the Natick snap, and soft, interwoven straps. The PALS system has begun to be adopted by other forces, such as the British Army, who use it on their Osprey body armor.
The Singapore Police Force has employed several different styles of uniforms throughout its history. Since 1969 it has used dark blue for its uniforms, although the first police uniforms introduced in 1856 were also in the same colour.
The Amphibious Assault Vest, Quick-Release, or FSBE AAV QR, is a light-weight assault vest system that incorporates both protection and cargo retention. Protection includes soft armor coupled with hard ballistic inserts. Cargo retention capabilities include various pouches and pockets attached via standard PALS webbing. The entire FSBE kit includes the vest body, a throat protector, a groin protector and an assortment of load bearing pouches. A fully loaded vest with armor plates can prove quite heavy, and is typically used only in high-risk direct action (DA) missions.
1937 Pattern Web Equipment was an item of military load-carrying equipment. It replaced the 1908 Pattern and 1925 Pattern—on which it was based—and was standard issue for British and Commonwealth troops from its introduction in 1937, throughout World War II, and in the post-war period until it was superseded by 1958 Pattern Web Equipment. It remained in limited use with Territorial Army and other second-line troops until the mid to late 1970s. Official use of the webbing in Community Cadet Forces and the Combined Cadet Force persisted into the 1980s.
The Soldier Plate Carrier System (SPCS), known commercially as the KDH Magnum TAC-1, is a plate carrier developed for the U.S. Army which provides protection in accordance with if not greater than, the Improved Outer Tactical Vest. The SPCS is a lighter alternative to the IOTV, with increased mobility and comfort. The MSV, part of the US Army's SPS, is intended to replace all currently fielded body armor systems.
The Mark 7 helmet is a former general issue combat helmet of the British Armed Forces, which was replaced by the Revision Batlskin Cobra Plus as part of the Virtus programme. Officially known as the GS Mark 7 combat helmet, it replaced the previous Mark 6A helmet and Mk 6 helmet.
6B45 is a standard ballistic vest of the Armed Forces of the Russian Federation. It is a part of Ratnik infantry combat system. It was adopted in 2014 as a replacement for the 6B23 vest. 6B45 vest has been developed by Techinkom company located in Saint Petersburg.
6B5 "Ulej" is a bulletproof vest system created for the Soviet Armed Forces. Being an improvement in terms of protection over the previously issued 6B3 armor, 6B5 Ulej was in fact an entire system of ballistic vests for different branches of troops. It was created by NII Stali.
