Ostwald ripening

Last updated
Ostwald ripening in palladium nanoparticles dissolved in formaldehyde at 6 (a), 24 (b), 48 (c) and 72 hours (d). The small palladium particles are being consumed as the larger ones grow bigger. TEM of Ostwald ripening in Pd nanoparticles.jpg
Ostwald ripening in palladium nanoparticles dissolved in formaldehyde at 6 (a), 24 (b), 48 (c) and 72 hours (d). The small palladium particles are being consumed as the larger ones grow bigger.
Growth of bubbles in a liquid foam via Ostwald ripening. [2]

Ostwald ripening is a phenomenon observed in solid solutions and liquid sols that involves the change of an inhomogeneous structure over time, in that small crystals or sol particles first dissolve and then redeposit onto larger crystals or sol particles. [3]

Contents

Dissolution of small crystals or sol particles and the redeposition of the dissolved species on the surfaces of larger crystals or sol particles was first described by Wilhelm Ostwald in 1896. [4] [5] For colloidal systems, Ostwald ripening is also found in water-in-oil emulsions, while flocculation is found in oil-in-water emulsions. [6]

Mechanism

This thermodynamically-driven spontaneous process occurs because larger particles are more energetically favored than smaller particles. [7] This stems from the fact that molecules on the surface of a particle are energetically less stable than the ones in the interior.

Cubic crystal structure (sodium chloride) Sodium-chloride-3D-ionic.png
Cubic crystal structure (sodium chloride)

Consider a cubic crystal of atoms: all the atoms inside are bonded to 6 neighbours and are quite stable, but atoms on the surface are only bonded to 5 neighbors or fewer, which makes these surface atoms less stable. Large particles are more energetically favorable since, continuing with this example, more atoms are bonded to 6 neighbors and fewer atoms are at the unfavorable surface. As the system tries to lower its overall energy, molecules on the surface of a small particle (energetically unfavorable, with only 3 or 4 or 5 bonded neighbors) will tend to detach from the particle and diffuse into the solution.

Kelvin's equation describes the relationship between the radius of curvature and the chemical potential between the surface and the inner volume:

where corresponds to the chemical potential, to the surface tension, to the atomic volume and to the radius of the particle. The chemical potential of an ideal solution can also be expressed as a function of the solute’s concentration if liquid and solid phases are in equilibrium.

where corresponds to the Boltzmann Constant, to the temperature and to the solute concentration in a solution in which the solid and the liquid phase are in equilibrium.

Combining both expressions the following equation is obtained:

Thus, the equilibrium concentration, , is lower around bigger particles than it is around smaller particles.

where and are the particles radius, and . Inferring from Fick’s first law of diffusion, the particles will move from big concentrations, corresponding to areas surrounding small particles, to small concentrations, corresponding to areas surrounding large nanoparticles. Thus, the small particles will tend to shrink while the big particles will grow. As a result, the average size of the nanoparticles in the solution will grow, and the dispersion of sizes will decrease. Therefore, if a solution is left for a long time, in the extreme case of , its particles would evolve until they would finally form a single huge spherical particle to minimize the total surface area.

The history of research progress in quantitatively modeling Ostwald ripening is long, with many derivations. [8] In 1958, Lifshitz and Slyozov [9] performed a mathematical investigation of Ostwald ripening in the case where diffusion of material is the slowest process. They began by stating how a single particle grows in a solution. This equation describes where the boundary is between small, shrinking particles and large, growing particles. They finally conclude that the average radius of the particles ⟨R⟩, grows as follows:

where

average radius of all the particles
particle surface tension or surface energy
solubility of the particle material
molar volume of the particle material
diffusion coefficient of the particle material
ideal gas constant
absolute temperature and
time.

Note that the quantity ⟨R⟩3 is different from ⟨R3, and only the former one can be used to calculate average volume, and that the statement that ⟨R⟩ goes as t1/3 relies on ⟨R⟩0 being zero; but because nucleation is a separate process from growth, this places ⟨R⟩0 outside the bounds of validity of the equation. In contexts where the actual value of ⟨R⟩0 is irrelevant, an approach that respects the meanings of all terms is to take the time derivative of the equation to eliminate ⟨R⟩0 and t. Another such approach is to change the ⟨R⟩0 to ⟨R⟩i with the initial time i having a positive value.[ citation needed ]

Also contained in the Lifshitz and Slyozov derivation is an equation for the size distribution function f(R, t) of particles. For convenience, the radius of particles is divided by the average radius to form a new variable, ρ = R(⟨R⟩)−1.

Three years after that Lifshitz and Slyozov published their findings (in Russian, 1958), Carl Wagner performed his own mathematical investigation of Ostwald ripening, [10] examining both systems where diffusion was slow and also where attachment and detachment at the particle surface was slow. Although his calculations and approach were different, Wagner came to the same conclusions as Lifshitz and Slyozov for slow-diffusion systems. This duplicate derivation went unnoticed for years because the two scientific papers were published on opposite sides of the Iron Curtain in 1961.[ citation needed ] It was not until 1975 that Kahlweit addressed the fact that the theories were identical [11] and combined them into the Lifshitz-Slyozov-Wagner or LSW theory of Ostwald ripening. Many experiments and simulations have shown LSW theory to be robust and accurate. Even some systems that undergo spinodal decomposition have been shown to quantitatively obey LSW theory after initial stages of growth. [12]

Wagner derived that when attachment and detachment of molecules is slower than diffusion, then the growth rate becomes

where ks is the reaction rate constant of attachment with units of length per time. Since the average radius is usually something that can be measured in experiments, it is fairly easy to tell if a system is obeying the slow-diffusion equation or the slow-attachment equation. If the experimental data obeys neither equation, then it is likely that another mechanism is taking place and Ostwald ripening is not occurring.

Although LSW theory and Ostwald ripening were intended for solids ripening in a fluid, Ostwald ripening is also observed in liquid-liquid systems, for example, in an oil-in-water emulsion polymerization. [6] In this case, Ostwald ripening causes the diffusion of monomers (i.e. individual molecules or atoms) from smaller droplets to larger droplets due to greater solubility of the single monomer molecules in the larger monomer droplets. The rate of this diffusion process is linked to the solubility of the monomer in the continuous (water) phase of the emulsion. This can lead to the destabilization of emulsions (for example, by creaming and sedimentation). [13]

Specific examples

Oil droplets in pastis mixed with water grow by Ostwald ripening. Pastis1.jpg
Oil droplets in pastis mixed with water grow by Ostwald ripening.

One example of Ostwald ripening is the re-crystallization of water within ice cream which gives old ice cream a gritty, crunchy texture. Larger ice crystals grow at the expense of smaller ones within the ice cream, creating a coarser texture. [14]

Another gastronomical example is the ouzo effect, where the droplets in the cloudy microemulsion grow by Ostwald ripening.

In geology, it is the textural coarsening, aging or growth of phenocrysts and crystals in solid rock which is below the solidus temperature. It is often ascribed as a process in the formation of orthoclase megacrysts, [15] as an alternative to the physical processes governing crystal growth from nucleation and growth rate thermochemical limitations.

In aqueous solution chemistry and precipitates ageing, the term refers to the growth of larger crystals from those of smaller size which have a higher solubility than the larger ones. In the process, many small crystals formed initially (nuclei) slowly disappear, except for a few that grow larger, at the expense of the small crystals (crystal growth). The smaller crystals act as fuel for the growth of bigger crystals. Limiting Ostwald ripening is fundamental in modern technology for the solution synthesis of quantum dots. [16] Ostwald ripening is also the key process in the digestion and aging of precipitates, an important step in gravimetric analysis. The digested precipitate is generally purer, and easier to wash and filter.

Ostwald ripening can also occur in emulsion systems, with molecules diffusing from small droplets to large ones through the continuous phase. When a miniemulsion is desired, an extremely hydrophobic compound is added to stop this process from taking place. [17]

Diffusional growth of larger drops in liquid water clouds in the atmosphere at the expense of smaller drops is also characterized as Ostwald ripening. [18]

See also

Related Research Articles

<span class="mw-page-title-main">Brownian motion</span> Random motion of particles suspended in a fluid

Brownian motion is the random motion of particles suspended in a medium.

<span class="mw-page-title-main">Fick's laws of diffusion</span> Mathematical descriptions of molecular diffusion

Fick's laws of diffusion describe diffusion and were first posited by Adolf Fick in 1855 on the basis of largely experimental results. They can be used to solve for the diffusion coefficient, D. Fick's first law can be used to derive his second law which in turn is identical to the diffusion equation.

A viscometer is an instrument used to measure the viscosity of a fluid. For liquids with viscosities which vary with flow conditions, an instrument called a rheometer is used. Thus, a rheometer can be considered as a special type of viscometer. Viscometers can measure only constant viscosity, that is, viscosity that does not change with flow conditions.

<span class="mw-page-title-main">Aerosol</span> Suspension of fine solid particles or liquid droplets in air or another gas

An aerosol is a suspension of fine solid particles or liquid droplets in air or another gas. Aerosols can be generated from natural or human causes. The term aerosol commonly refers to the mixture of particulates in air, and not to the particulate matter alone. Examples of natural aerosols are fog, mist or dust. Examples of human caused aerosols include particulate air pollutants, mist from the discharge at hydroelectric dams, irrigation mist, perfume from atomizers, smoke, dust, sprayed pesticides, and medical treatments for respiratory illnesses.

<span class="mw-page-title-main">Sintering</span> Process of forming and bonding material by heat or pressure

Sintering or frittage is the process of compacting and forming a solid mass of material by pressure or heat without melting it to the point of liquefaction. Sintering happens as part of a manufacturing process used with metals, ceramics, plastics, and other materials. The nanoparticles in the sintered material diffuse across the boundaries of the particles, fusing the particles together and creating a solid piece.

<span class="mw-page-title-main">Collision theory</span> Chemistry principle

Collision theory is a principle of chemistry used to predict the rates of chemical reactions. It states that when suitable particles of the reactant hit each other with the correct orientation, only a certain amount of collisions result in a perceptible or notable change; these successful changes are called successful collisions. The successful collisions must have enough energy, also known as activation energy, at the moment of impact to break the pre-existing bonds and form all new bonds. This results in the products of the reaction. The activation energy is often predicted using the Transition state theory. Increasing the concentration of the reactant brings about more collisions and hence more successful collisions. Increasing the temperature increases the average kinetic energy of the molecules in a solution, increasing the number of collisions that have enough energy. Collision theory was proposed independently by Max Trautz in 1916 and William Lewis in 1918.

Critical radius is the minimum particle size from which an aggregate is thermodynamically stable. In other words, it is the lowest radius formed by atoms or molecules clustering together before a new phase inclusion is viable and begins to grow. Formation of such stable nuclei is called nucleation.

In physics, the Einstein relation is a previously unexpected connection revealed independently by William Sutherland in 1904, Albert Einstein in 1905, and by Marian Smoluchowski in 1906 in their works on Brownian motion. The more general form of the equation in the classical case is

The Ostwald–Freundlich equation governs boundaries between two phases; specifically, it relates the surface tension of the boundary to its curvature, the ambient temperature, and the vapor pressure or chemical potential in the two phases.

The Kelvin equation describes the change in vapour pressure due to a curved liquid–vapor interface, such as the surface of a droplet. The vapor pressure at a convex curved surface is higher than that at a flat surface. The Kelvin equation is dependent upon thermodynamic principles and does not allude to special properties of materials. It is also used for determination of pore size distribution of a porous medium using adsorption porosimetry. The equation is named in honor of William Thomson, also known as Lord Kelvin.

<span class="mw-page-title-main">Bubble raft</span> Array of bubbles

A bubble raft is an array of bubbles. It demonstrates materials' microstructural and atomic length-scale behavior by modelling the {111} plane of a close-packed crystal. A material's observable and measurable mechanical properties strongly depend on its atomic and microstructural configuration and characteristics. This fact is intentionally ignored in continuum mechanics, which assumes a material to have no underlying microstructure and be uniform and semi-infinite throughout.

The Cahn–Hilliard equation is an equation of mathematical physics which describes the process of phase separation, by which the two components of a binary fluid spontaneously separate and form domains pure in each component. If is the concentration of the fluid, with indicating domains, then the equation is written as

In physics, the Young–Laplace equation is an algebraic equation that describes the capillary pressure difference sustained across the interface between two static fluids, such as water and air, due to the phenomenon of surface tension or wall tension, although use of the latter is only applicable if assuming that the wall is very thin. The Young–Laplace equation relates the pressure difference to the shape of the surface or wall and it is fundamentally important in the study of static capillary surfaces. It is a statement of normal stress balance for static fluids meeting at an interface, where the interface is treated as a surface :

Diffusivity, mass diffusivity or diffusion coefficient is usually written as the proportionality constant between the molar flux due to molecular diffusion and the negative value of the gradient in the concentration of the species. More accurately, the diffusion coefficient times the local concentration is the proportionality constant between the negative value of the mole fraction gradient and the molar flux. This distinction is especially significant in gaseous systems with strong temperature gradients. Diffusivity derives its definition from Fick's law and plays a role in numerous other equations of physical chemistry.

<span class="mw-page-title-main">Rotational diffusion</span>

Rotational diffusion is the rotational movement which acts upon any object such as particles, molecules, atoms when present in a fluid, by random changes in their orientations. Whilst the directions and intensities of these changes are statistically random, they do not arise randomly and are instead the result of interactions between particles. One example occurs in colloids, where relatively large insoluble particles are suspended in a greater amount of fluid. The changes in orientation occur from collisions between the particle and the many molecules forming the fluid surrounding the particle, which each transfer kinetic energy to the particle, and as such can be considered random due to the varied speeds and amounts of fluid molecules incident on each individual particle at any given time.

In nonideal fluid dynamics, the Hagen–Poiseuille equation, also known as the Hagen–Poiseuille law, Poiseuille law or Poiseuille equation, is a physical law that gives the pressure drop in an incompressible and Newtonian fluid in laminar flow flowing through a long cylindrical pipe of constant cross section. It can be successfully applied to air flow in lung alveoli, or the flow through a drinking straw or through a hypodermic needle. It was experimentally derived independently by Jean Léonard Marie Poiseuille in 1838 and Gotthilf Heinrich Ludwig Hagen, and published by Hagen in 1839 and then by Poiseuille in 1840–41 and 1846. The theoretical justification of the Poiseuille law was given by George Stokes in 1845.

<span class="mw-page-title-main">Vapor–liquid–solid method</span> Mechanism to grow nano wires

The vapor–liquid–solid method (VLS) is a mechanism for the growth of one-dimensional structures, such as nanowires, from chemical vapor deposition. The growth of a crystal through direct adsorption of a gas phase on to a solid surface is generally very slow. The VLS mechanism circumvents this by introducing a catalytic liquid alloy phase which can rapidly adsorb a vapor to supersaturation levels, and from which crystal growth can subsequently occur from nucleated seeds at the liquid–solid interface. The physical characteristics of nanowires grown in this manner depend, in a controllable way, upon the size and physical properties of the liquid alloy.

The Gibbs–Thomson effect, in common physics usage, refers to variations in vapor pressure or chemical potential across a curved surface or interface. The existence of a positive interfacial energy will increase the energy required to form small particles with high curvature, and these particles will exhibit an increased vapor pressure. See Ostwald–Freundlich equation. More specifically, the Gibbs–Thomson effect refers to the observation that small crystals are in equilibrium with their liquid melt at a lower temperature than large crystals. In cases of confined geometry, such as liquids contained within porous media, this leads to a depression in the freezing point / melting point that is inversely proportional to the pore size, as given by the Gibbs–Thomson equation.

The vaporizing droplet problem is a challenging issue in fluid dynamics. It is part of many engineering situations involving the transport and computation of sprays: fuel injection, spray painting, aerosol spray, flashing releases… In most of these engineering situations there is a relative motion between the droplet and the surrounding gas. The gas flow over the droplet has many features of the gas flow over a rigid sphere: pressure gradient, viscous boundary layer, wake. In addition to these common flow features one can also mention the internal liquid circulation phenomenon driven by surface-shear forces and the boundary layer blowing effect.

A depletion force is an effective attractive force that arises between large colloidal particles that are suspended in a dilute solution of depletants, which are smaller solutes that are preferentially excluded from the vicinity of the large particles. One of the earliest reports of depletion forces that lead to particle coagulation is that of Bondy, who observed the separation or "creaming" of rubber latex upon addition of polymer depletant molecules to solution. More generally, depletants can include polymers, micelles, osmolytes, ink, mud, or paint dispersed in a continuous phase.

References

  1. Zhang, Zhaorui; Wang, Zhenni; He, Shengnan; Wang, Chaoqi; Jin, Mingshang; Yin, Yadong (2015). "Redox reaction induced Ostwald ripening for size- and shape-focusing of palladium nanocrystals". Chem. Sci. 6 (9): 5197–5203. doi:10.1039/C5SC01787D. PMC   5669216 . PMID   29449925. Open Access logo PLoS transparent.svg
  2. Huang, Zhandong; Su, Meng; Yang, Qiang; Li, Zheng; Chen, Shuoran; Li, Yifan; Zhou, Xue; Li, Fengyu; Song, Yanlin (2017). "A general patterning approach by manipulating the evolution of two-dimensional liquid foams". Nature Communications. 8: 14110. Bibcode:2017NatCo...814110H. doi:10.1038/ncomms14110. PMC   5290267 . PMID   28134337.
  3. IUPAC , Compendium of Chemical Terminology , 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006) " Ostwald ripening ". doi : 10.1351/goldbook.O04348
  4. Ostwald, W. (1896). Lehrbuch der Allgemeinen Chemie, vol. 2, part 1. Leipzig, Germany.
  5. Ostwald, W. (1897). "Studien über die Bildung und Umwandlung fester Körper" [Studies on the formation and transformation of solid bodies](PDF). Zeitschrift für Physikalische Chemie. 22: 289–330.
  6. 1 2 Hubbard, Arthur T. (2004). Encyclopedia of Surface and Colloid Science. CRC Press. p. 4230. ISBN   978-0-8247-0759-0 . Retrieved 2007-11-13.
  7. Ratke, Lorenz; Voorhees, Peter W. (2002). Growth and Coarsening: Ostwald Ripening in Material Processing. Springer. pp. 117–118. ISBN   978-3-540-42563-2.
  8. Baldan, A. (2002). "Review Progress in Ostwald ripening theories and their applications to nickel-base superalloys Part I: Ostwald ripening theories". Journal of Materials Science. 37 (11): 2171–2202. Bibcode:2002JMatS..37.2171B. doi:10.1023/A:1015388912729. S2CID   12733546.
  9. Lifshitz, I.M.; Slyozov, V.V. (1961). "The Kinetics of Precipitation from Supersaturated Solid Solutions". Journal of Physics and Chemistry of Solids. 19 (1–2): 35–50. Bibcode:1961JPCS...19...35L. doi:10.1016/0022-3697(61)90054-3.
  10. Wagner, C. (1961). "Theorie der Alterung von Niederschlägen durch Umlösen (Ostwald-Reifung)" [Theory of the aging of precipitates by dissolution-reprecipitation (Ostwald ripening)]. Zeitschrift für Elektrochemie. 65 (7): 581–591. doi:10.1002/bbpc.19610650704. S2CID   178975941.
  11. Kahlweit, M. (1975). "Ostwald Ripening of Precipitates". Advances in Colloid and Interface Science. 5 (1): 1–35. doi:10.1016/0001-8686(75)85001-9.
  12. Vladimirova, N.; Malagoli, A.; Mauri, R. (1998). "Diffusion-driven phase separation of deeply quenched mixtures". Physical Review E. 58 (6): 7691–7699. Bibcode:1998PhRvE..58.7691V. doi:10.1103/PhysRevE.58.7691.
  13. Branen, Alfred Larry (2002). Food Additives. CRC Press. p. 724. ISBN   978-0-8247-9343-2.
  14. Clark, Chris (2004). The Science of Ice Cream. Royal Society of Chemistry. pp. 78–79. ISBN   978-0-85404-629-4.
  15. Mock, A. (2003). "Using Quantitative Textural Analysis to Understand the Emplacement of Shallow-Level Rhyolitic Laccoliths—a Case Study from the Halle Volcanic Complex, Germany". Journal of Petrology. 44 (5): 833–849. Bibcode:2003JPet...44..833M. doi: 10.1093/petrology/44.5.833 .
  16. Vengrenovich, R.D.; Gudyma, Yu. V.; Yarema, S. V. (December 2001). "Ostwald ripening of quantum-dot nanostructures". Semiconductors. 35 (12): 1378–1382. Bibcode:2001Semic..35.1378V. doi:10.1134/1.1427975. S2CID   93899315.
  17. McClements, David Julian; Henson, Lulu; Popplewell, L. Michael; Decker, Eric Andrew; Choi, Seung Jun (2012). "Inhibition of Ostwald Ripening in Model Beverage Emulsions by Addition of Poorly Water Soluble Triglyceride Oils". Journal of Food Science. 77 (1): C33–C38. doi:10.1111/j.1750-3841.2011.02484.x. ISSN   1750-3841. PMID   22133014.
  18. Wood, R.; Irons, S.; Jonas, P. R. (2002). "How important is the spectral ripening effect in stratiform boundary layer clouds? Studies using simple trajectory analysis". Journal of the Atmospheric Sciences. 59 (18): 2681–2693. Bibcode:2002JAtS...59.2681W. doi: 10.1175/1520-0469(2002)059<2681:HIITSR>2.0.CO;2 .