PEDOT:PSS

Last updated
PEDOT:PSS Polythiophenes Pedotpss.png
PEDOT:PSS
Electrochromic switching in two PEDOT:PSS electrodes connected by a piece of PhastGel SDS buffer strips. The electrodes were reversibly and repeatedly oxidized and reduced by switching the polarity of an applied 1 V potential. This was observed by a color change between dark (reduced PEDOT) and light (oxidized PEDOT) blue within the electrodes, demonstrating the transport of ions between and into the electrodes. [1]

poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) is a polymer mixture of two ionomers. One component in this mixture is made up of polystyrene sulfonate which is a sulfonated polystyrene. Part of the sulfonyl groups are deprotonated and carry a negative charge. The other component poly(3,4-ethylenedioxythiophene) (PEDOT) is a conjugated polymer and carries positive charges and is based on polythiophene. Together the charged macromolecules form a macromolecular salt. [2]

Contents

Synthesis

PEDOT:PSS can be prepared by mixing an aqueous solution of PSS with EDOT monomer, and to the resulting mixture, a solution of sodium persulfate and ferric sulfate. [3] [4]

Applications

PEDOT:PSS has the highest efficiency among conductive organic thermoelectric materials (ZT~0.42) and thus can be used in flexible and biodegradable thermoelectric generators. [5] Yet its largest application is as a transparent, conductive polymer with high ductility. For example, AGFA coats 200 million photographic films per year[ citation needed ] with a thin, extensively-stretched layer of virtually transparent and colorless PEDOT:PSS as an antistatic agent to prevent electrostatic discharges during production and normal film use, independent of humidity conditions, and as electrolyte in polymer electrolytic capacitors.[ clarification needed ]

If organic compounds, including high boiling solvents like methylpyrrolidone, dimethyl sulfoxide, sorbitol, ionic liquids and surfactants, are added conductivity increases by many orders of magnitude. [6] [7] [8] [9] [10] This makes it also suitable as a transparent electrode, for example in touchscreens, organic light-emitting diodes, [11] flexible organic solar cells [12] [13] and electronic paper to replace the traditionally used indium tin oxide (ITO). Owing to the high conductivity (up to 4600 S/cm), [14] it can be used as a cathode material in capacitors replacing manganese dioxide or liquid electrolytes. It is also used in organic electrochemical transistors.

The conductivity of PEDOT:PSS can also be significantly improved by a post-treatment with various compounds, such as ethylene glycol, dimethyl sulfoxide (DMSO), salts, zwitterions, cosolvents, acids, alcohols, phenol, geminal diols and amphiphilic fluoro-compounds. [15] [16] [17] [18] [19] This conductivity is comparable to that of ITO, the popular transparent electrode material, and it can triple that of ITO after a network of carbon nanotubes and silver nanowires is embedded into PEDOT:PSS [20] and used for flexible organic devices. [21]

PEDOT:PSS is generally applied as a dispersion of gelled particles in water. A conductive layer on glass is obtained by spreading a layer of the dispersion on the surface usually by spin coating and driving out the water by heat. Special PEDOT:PSS inks and formulations were developed for different coating and printing processes. Water-based PEDOT:PSS inks are mainly used in slot die coating, flexography, rotogravure and inkjet printing. If a high viscous paste and slow drying is required like in screen-printing processes PEDOT:PSS can also be supplied in high boiling solvents like propanediol. Dry PEDOT:PSS pellets can be produced with a freeze drying method which are redispersable in water and different solvents, for example ethanol to increase drying speed during printing. Finally, to overcome degradation to ultraviolet light and high temperature or humidity conditions PEDOT:PSS UV-stabilizers are available. Linköping University claim to have made a "wooden transistor" by replacing the lignin from balsawood with PEDOT:PSS [22]

Mechanical Properties

Since PEDOT:PSS is most frequently used in thin film architectures, several methods have been developed to accurately probe its mechanical properties; for example, water-supported tensile testing, four-point bend tests to measure adhesive and cohesive fracture energy, buckling tests to measure modulus, and bending tests on PDMS and polyethylene supports to probe the crack onset strain. [23] Though PEDOT:PSS has a lower electrical mobility than silicon, which can also be incorporated into flexible electronics through the incorporation of stress-relief structures, sufficiently flexible PEDOT:PSS can enable lower cost-processing, such as roll-to-roll processing. [24] The most important characteristics for an organic semiconductor used in thin-film architectures are low modulus in the elastic regime and high stretchability prior to fracture. [24] These properties have been found to be highly correlated to relative humidity. [25] At high relative humidity (>40%) hydrogen bonds are weakened in the PSS due to the uptake of water which leads to higher strain before fracture and lower elastic modulus. At low relative humidity (<23%) the presence of strong bonding between PSS grains leads to higher modulus and lower strain before fracture. Films at higher relative humidity are presumed to fail by intergranular fracture, whereas lower relative humidity leads to transgranular fracture. Additives like 3-glycidoxypropyltrimethoxysilane (GOPS) can drastically improve the mechanical stability in aqueous media even at low concentrations of 1 wt% without significantly impeding the electrical properties. [26]

PEDOT:PSS can also show self-healing properties if submerged in water after sustaining mechanical damage. [27] This self-healing capability is proposed to be enabled by the hygroscopic property of PSS−. [28] Common PEDOT:PSS additives that improve the electrical conductivity have varying effects on self-healing. While ethylene glycol improves electrical and mechanical self-healing, sulfuric acid reduces the former but improves the latter, presumably because it undergoes autoprotolysis. Polyethylene glycol improves the electrical and thermoelectric self-healing, but reduces the mechanical self-healing. [28]

PEDOT:PSS is also attractive for conductive textile applications. Though it results in inferior thermoelectric properties, wet-spinning has been shown to result in high conductivity and stiff fibers due to preferential alignment of polymer chains during fiber drawing. [29]

Related Research Articles

<span class="mw-page-title-main">Organic electronics</span> Field of materials science

Organic electronics is a field of materials science concerning the design, synthesis, characterization, and application of organic molecules or polymers that show desirable electronic properties such as conductivity. Unlike conventional inorganic conductors and semiconductors, organic electronic materials are constructed from organic (carbon-based) molecules or polymers using synthetic strategies developed in the context of organic chemistry and polymer chemistry.

Molecular electronics is the study and application of molecular building blocks for the fabrication of electronic components. It is an interdisciplinary area that spans physics, chemistry, and materials science. The unifying feature is use of molecular building blocks to fabricate electronic components. Due to the prospect of size reduction in electronics offered by molecular-level control of properties, molecular electronics has generated much excitement. It provides a potential means to extend Moore's Law beyond the foreseen limits of small-scale conventional silicon integrated circuits.

Indium tin oxide (ITO) is a ternary composition of indium, tin and oxygen in varying proportions. Depending on the oxygen content, it can be described as either a ceramic or an alloy. Indium tin oxide is typically encountered as an oxygen-saturated composition with a formulation of 74% In, 8% Sn, and 18% O by weight. Oxygen-saturated compositions are so typical that unsaturated compositions are termed oxygen-deficient ITO. It is transparent and colorless in thin layers, while in bulk form it is yellowish to gray. In the infrared region of the spectrum it acts as a metal-like mirror.

<span class="mw-page-title-main">Conductive polymer</span> Organic polymers that conduct electricity

Conductive polymers or, more precisely, intrinsically conducting polymers (ICPs) are organic polymers that conduct electricity. Such compounds may have metallic conductivity or can be semiconductors. The main advantage of conductive polymers is that they are easy to process, mainly by dispersion. Conductive polymers are generally not thermoplastics, i.e., they are not thermoformable. But, like insulating polymers, they are organic materials. They can offer high electrical conductivity but do not show similar mechanical properties to other commercially available polymers. The electrical properties can be fine-tuned using the methods of organic synthesis and by advanced dispersion techniques.

<span class="mw-page-title-main">Polyacetylene</span> Organic polymer made of the repeating unit [C2H2]

Polyacetylene usually refers to an organic polymer with the repeating unit [C2H2]n. The name refers to its conceptual construction from polymerization of acetylene to give a chain with repeating olefin groups. This compound is conceptually important, as the discovery of polyacetylene and its high conductivity upon doping helped to launch the field of organic conductive polymers. The high electrical conductivity discovered by Hideki Shirakawa, Alan Heeger, and Alan MacDiarmid for this polymer led to intense interest in the use of organic compounds in microelectronics. This discovery was recognized by the Nobel Prize in Chemistry in 2000. Early work in the field of polyacetylene research was aimed at using doped polymers as easily processable and lightweight "plastic metals". Despite the promise of this polymer in the field of conductive polymers, many of its properties such as instability to air and difficulty with processing have led to avoidance in commercial applications.

<span class="mw-page-title-main">Polythiophene</span>

Polythiophenes (PTs) are polymerized thiophenes, a sulfur heterocycle. The parent PT is an insoluble colored solid with the formula (C4H2S)n. The rings are linked through the 2- and 5-positions. Poly(alkylthiophene)s have alkyl substituents at the 3- or 4-position(s). They are also colored solids, but tend to be soluble in organic solvents.

An antistatic agent is a compound used for treatment of materials or their surfaces in order to reduce or eliminate buildup of static electricity. Static charge may be generated by the triboelectric effect or by a non-contact process using a high voltage power source. Static charge may be introduced on a surface as part of an in-mold label printing process.

<span class="mw-page-title-main">Poly(3,4-ethylenedioxythiophene)</span>

Poly(3,4-ethylenedioxythiophene) is a conducting polymer based on 3,4-ethylenedioxythiophene or EDOT. It was first reported by Bayer AG in 1989.

<span class="mw-page-title-main">Printed electronics</span> Electronic devices created by various printing methods

Printed electronics is a set of printing methods used to create electrical devices on various substrates. Printing typically uses common printing equipment suitable for defining patterns on material, such as screen printing, flexography, gravure, offset lithography, and inkjet. By electronic-industry standards, these are low-cost processes. Electrically functional electronic or optical inks are deposited on the substrate, creating active or passive devices, such as thin film transistors; capacitors; coils; resistors. Some researchers expect printed electronics to facilitate widespread, very low-cost, low-performance electronics for applications such as flexible displays, smart labels, decorative and animated posters, and active clothing that do not require high performance.

<span class="mw-page-title-main">PEDOT-TMA</span> Chemical compound

Poly(3,4-ethylenedioxythiophene)-tetramethacrylate or PEDOT-TMA is a p-type conducting polymer based on 3,4-ethylenedioxylthiophene or the EDOT monomer. It is a modification of the PEDOT structure. Advantages of this polymer relative to PEDOT are that it is dispersible in organic solvents, and it is non-corrosive. PEDOT-TMA was developed under a contract with the National Science Foundation, and it was first announced publicly on April 12, 2004. The trade name for PEDOT-TMA is Oligotron. PEDOT-TMA was featured in an article entitled "Next Stretch for Plastic Electronics" that appeared in Scientific American in 2004. The U.S. Patent office issued a patent protecting PEDOT-TMA on April 22, 2008.

Organic photovoltaic devices (OPVs) are fabricated from thin films of organic semiconductors, such as polymers and small-molecule compounds, and are typically on the order of 100 nm thick. Because polymer based OPVs can be made using a coating process such as spin coating or inkjet printing, they are an attractive option for inexpensively covering large areas as well as flexible plastic surfaces. A promising low cost alternative to conventional solar cells made of crystalline silicon, there is a large amount of research being dedicated throughout industry and academia towards developing OPVs and increasing their power conversion efficiency.

<span class="mw-page-title-main">Organic solar cell</span> Type of photovoltaic

An organic solar cell (OSC) or plastic solar cell is a type of photovoltaic that uses organic electronics, a branch of electronics that deals with conductive organic polymers or small organic molecules, for light absorption and charge transport to produce electricity from sunlight by the photovoltaic effect. Most organic photovoltaic cells are polymer solar cells.

<span class="mw-page-title-main">Transparent conducting film</span> Optically transparent and electrically conductive material

Transparent conducting films (TCFs) are thin films of optically transparent and electrically conductive material. They are an important component in a number of electronic devices including liquid-crystal displays, OLEDs, touchscreens and photovoltaics. While indium tin oxide (ITO) is the most widely used, alternatives include wider-spectrum transparent conductive oxides (TCOs), conductive polymers, metal grids and random metallic networks, carbon nanotubes (CNT), graphene, nanowire meshes and ultra thin metal films.

<span class="mw-page-title-main">Polymer capacitor</span> Solid conductive electrolyte

A polymer capacitor, or more accurately a polymer electrolytic capacitor, is an electrolytic capacitor (e-cap) with a solid conductive polymer electrolyte. There are four different types:

<span class="mw-page-title-main">Surface chemistry of neural implants</span>

As with any material implanted in the body, it is important to minimize or eliminate foreign body response and maximize effectual integration. Neural implants have the potential to increase the quality of life for patients with such disabilities as Alzheimer's, Parkinson's, epilepsy, depression, and migraines. With the complexity of interfaces between a neural implant and brain tissue, adverse reactions such as fibrous tissue encapsulation that hinder the functionality, occur. Surface modifications to these implants can help improve the tissue-implant interface, increasing the lifetime and effectiveness of the implant.

Electronic skin refers to flexible, stretchable and self-healing electronics that are able to mimic functionalities of human or animal skin. The broad class of materials often contain sensing abilities that are intended to reproduce the capabilities of human skin to respond to environmental factors such as changes in heat and pressure.

The organic electrochemical transistor (OECT) is an organic electronic device which functions like a transistor. The current flowing through the device is controlled by the exchange of ions between an electrolyte and the OECT channel composed of an organic conductor or semiconductor. The exchange of ions is driven by a voltage applied to the gate electrode which is in ionic contact with the channel through the electrolyte. The migration of ions between the channel and the electrolyte is accompanied by electrochemical redox reactions occurring in the channel material. The electrochemical redox of the channel along with ion migration changes the conductivity of the channel in a process called electrochemical doping. OECTs are being explored for applications in biosensors, bioelectronics and large-area, low-cost electronics. OECTs can also be used as multi-bit memory devices that mimic the synaptic functionalities of the brain. For this reason, OECTs can be also being investigated as elements in neuromorphic computing applications.

3,4-Ethylenedioxythiophene (EDOT) is an organosulfur compound with the formula C2H4O2C4H2S. The molecule consists of thiophene, substituted at the 3 and 4 positions with an ethylene glycolyl unit. It is a colorless viscous liquid.

A polymer electrolyte is a polymer matrix capable of ion conduction. Much like other types of electrolyte—liquid and solid-state—polymer electrolytes aid in movement of charge between the anode and cathode of a cell. The use of polymers as an electrolyte was first demonstrated using dye-sensitized solar cells. The field has expanded since and is now primarily focused on the development of polymer electrolytes with applications in batteries, fuel cells, and membranes.

Jaime C. Grunlan is a material scientist and academic. He is a Professor of Mechanical Engineering, and Leland T. Jordan ’29 Chair Professor at Texas A&M University.

References

  1. ↑ Bengtsson K, Nilsson S, Robinson N (2014). "Conducting Polymer Electrodes for Gel Electrophoresis". PLOS ONE. 9 (2): e89416. doi: 10.1371/journal.pone.0089416 . PMC   3929695 . PMID   24586761.
  2. ↑ Groenendaal, L.; Jonas, F.; Freitag, D.; Pielartzik, H.; Reynolds, J. R. (2000). "Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future". Advanced Materials. 12 (7): 481–494. doi:10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C.
  3. ↑ Geoghegan, Mark; Hadziioannou, Georges (2013). Polymer electronics (First ed.). Oxford: Oxford University Press. p. 125. ISBN   9780199533824.
  4. ↑ Yoo, Dohyuk; Kim, Jeonghun; Kim, Jung Hyun (2014). "Direct synthesis of highly conductive poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS)/graphene composites and their applications in energy harvesting systems" (PDF). Nano Research. 7 (5): 717–730. doi:10.1007/s12274-014-0433-z. S2CID   95642579 . Retrieved 31 August 2017.
  5. ↑ Satoh, Norifusa; Otsuka, Masaji; Ohki, Tomoko; Ohi, Akihiko; Sakurai, Yasuaki; Yamashita, Yukihiko; Mori, Takao (2018). "Organic π-type thermoelectric module supported by photolithographic mold: A working hypothesis of sticky thermoelectric materials". Science and Technology of Advanced Materials. 19 (1): 517–525. doi:10.1080/14686996.2018.1487239. PMC   6052422 . PMID   30034560.
  6. ↑ Kim, Yong Hyun; Sachse, Christoph; Machala, Michael L.; May, Christian; Müller-Meskamp, Lars; Leo, Karl (2011-03-22). "Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post-Treatment for ITO-Free Organic Solar Cells". Advanced Functional Materials. 21 (6): 1076–1081. doi:10.1002/adfm.201002290. S2CID   136583700.
  7. ↑ Kim, J. Y.; Jung, J. H.; Lee, D. E.; Joo, J. (2002). "Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents". Synthetic Metals. 126 (2–3): 311–316. doi:10.1016/S0379-6779(01)00576-8.
  8. ↑ Ouyang, J.; Xu, Q.; Chu, C. W.; Yang, Y.; Li, G.; Shinar, J. (2004). "On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment". Polymer. 45 (25): 8443–8450. doi:10.1016/j.polymer.2004.10.001.
  9. ↑ Döbbelin, M.; Marcilla, R.; Salsamendi, M.; Pozo-Gonzalo, C.; Carrasco, P. M.; Pomposo, J. A.; Mecerreyes, D. (2007). "Influence of Ionic Liquids on the Electrical Conductivity and Morphology of PEDOT:PSS Films". Chemistry of Materials. 19 (9): 2147–2149. doi:10.1021/cm070398z.
  10. ↑ Xia, Y; Ouyang, J (2010). "Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) films through a treatment with organic carboxylic acids and inorganic acids". ACS Applied Materials & Interfaces. 2 (2): 474–83. doi:10.1021/am900708x. PMID   20356194.
  11. ↑ Kim, Yong Hyun; Lee, Jonghee; Hofmann, Simone; Gather, Malte C.; Müller-Meskamp, Lars; Leo, Karl (2013). "Achieving High Efficiency and Improved Stability in ITO-Free Transparent Organic Light-Emitting Diodes with Conductive Polymer Electrodes". Advanced Functional Materials. 23 (30): 3763–3769. doi:10.1002/adfm.201203449. S2CID   137196552.
  12. ↑ Park, Yoonseok; Berger, Jana; Tang, Zheng; Müller-Meskamp, Lars; Lasagni, Andrés Fabián; Vandewal, Koen; Leo, Karl (2016). "Flexible, light trapping substrates for organic photovoltaics". Applied Physics Letters. 109 (9): 093301. Bibcode:2016ApPhL.109i3301P. doi: 10.1063/1.4962206 .
  13. ↑ Park, Yoonseok; Nehm, Frederik; Müller-Meskamp, Lars; Vandewal, Koen; Leo, Karl (2016). "Optical display film as flexible and light trapping substrate for organic photovoltaics". Optics Express. 24 (10): A974-80. Bibcode:2016OExpr..24A.974P. doi: 10.1364/OE.24.00A974 . PMID   27409970.
  14. ↑ Worfolk, Brian J.; Andrews, Sean C.; Park, Steve; Reinspach, Julia; Liu, Nan; Toney, Michael F.; Mannsfeld, Stefan C. B.; Bao, Zhenan (2015-11-17). "Ultrahigh electrical conductivity in solution-sheared polymeric transparent films". Proceedings of the National Academy of Sciences. 112 (46): 14138–14143. Bibcode:2015PNAS..11214138W. doi: 10.1073/pnas.1509958112 . PMC   4655535 . PMID   26515096.
  15. ↑ Bießmann, Lorenz; Kreuzer, Lucas Philipp; Widmann, Tobias; Hohn, Nuri; Moulin, Jean-François; Müller-Buschbaum, Peter (2018-03-21). "Monitoring the Swelling Behavior of PEDOT:PSS Electrodes under High Humidity Conditions". ACS Applied Materials & Interfaces. 10 (11): 9865–9872. doi:10.1021/acsami.8b00446. ISSN   1944-8244. PMID   29484879.
  16. ↑ Ouyang, J.; Chu, C. -W.; Chen, F. -C.; Xu, Q.; Yang, Y. (2005). "High-Conductivity Poly(3,4-ethylenedioxythiophene):Poly(styrene sulfonate) Film and Its Application in Polymer Optoelectronic Devices". Advanced Functional Materials. 15 (2): 203–208. doi: 10.1002/adfm.200400016 . S2CID   95522337.
  17. ↑ Saghaei, Jaber; Fallahzadeh, Ali; Saghaei, Tayebeh (2015). "ITO-free organic solar cells using highly conductive phenol-treated PEDOT:PSS anodes". Organic Electronics. 24: 188–194. doi:10.1016/j.orgel.2015.06.002.
  18. ↑ Fallahzadeh, Ali; Saghaei, Jaber; Yousefi, Mohammad Hassan (2014). "Effect of alcohol vapor treatment on electrical and optical properties of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for indium tin oxide-free organic light-emitting diodes". Applied Surface Science. 320: 895–900. doi:10.1016/j.apsusc.2014.09.143.
  19. ↑ Saghaei, Jaber; Fallahzadeh, Ali; Yousefi, Mohammad Hassan (2015). "Improvement of electrical conductivity of PEDOT:PSS films by 2-Methylimidazole post treatment". Organic Electronics. 19: 70–75. doi:10.1016/j.orgel.2015.01.026.
  20. ↑ Stapleton, A. J.; Yambem, S. D.; Johns, A. H.; Afre, R. A.; Ellis, A. V.; Shapter, J. G.; Andersson, G. G.; Quinton, J. S.; Burn, P. L.; Meredith, P.; Lewis, D. A. (2015). "Planar silver nanowire, carbon nanotube and PEDOT:PSS nanocomposite transparent electrodes". Science and Technology of Advanced Materials. 16 (2): 025002. doi:10.1088/1468-6996/16/2/025002. PMC   5036479 . PMID   27877771.
  21. ↑ Entifar, Siti Aisyah Nurmaulia; Han, Joo Won; Lee, Dong Jin; Ramadhan, Zeno Rizqi; Hong, Juhee; Kang, Moon Hee; Kim, Soyeon; Lim, Dongchan; Yun, Changhun; Kim, Yong Hyun (2019). "Simultaneously enhanced optical, electrical, and mechanical properties of highly stretchable transparent silver nanowire electrodes using organic surface modifier". Science and Technology of Advanced Materials. 20 (1): 116–123. doi:10.1080/14686996.2019.1568750. PMC   6383608 . PMID   30815043.
  22. ↑ LU News:The world’s first wood transistor28 April 2023
  23. ↑ Lipomi, Darren J.; Bao, Zhenan (2017-02-02). "Stretchable and ultraflexible organic electronics". MRS Bulletin. 42 (2): 93–97. doi: 10.1557/mrs.2016.325 . ISSN   0883-7694.
  24. 1 2 Root, Samuel E.; Savagatrup, Suchol; Printz, Adam D.; Rodriquez, Daniel; Lipomi, Darren J. (2017-03-25). "Mechanical Properties of Organic Semiconductors for Stretchable, Highly Flexible, and Mechanically Robust Electronics". Chemical Reviews. 117 (9): 6467–6499. doi: 10.1021/acs.chemrev.7b00003 . ISSN   0009-2665. PMID   28343389.
  25. ↑ Lang, Udo; Naujoks, Nicola; Dual, Jurg (2008-12-30). "Mechanical characterization of PEDOT:PSS thin films". Synthetic Metals. 159 (5–6): 473–479. doi:10.1016/j.synthmet.2008.11.005. ISSN   0379-6779.
  26. ↑ ElMahmoudy, Mohammed; Inal, Sahika; Charrier, Anne; Uguz, Ilke; Malliaras, George G.; Sanaur, Sébastien (2017-02-20). "Tailoring the Electrochemical and Mechanical Properties of PEDOT:PSS Films for Bioelectronics". Macromolecular Materials and Engineering. 302 (5): 1600497. doi:10.1002/mame.201600497. hdl: 10754/623061 . ISSN   1438-7492. S2CID   136269465.
  27. ↑ Zhang, Shiming; Cicoira, Fabio (2017-08-28). "Self-Healing: Water-Enabled Healing of Conducting Polymer Films (Adv. Mater. 40/2017)". Advanced Materials. 29 (40). doi: 10.1002/adma.201770291 . ISSN   0935-9648.
  28. 1 2 Xin, Xing; Xue, Zexu; Gao, Nan; Yu, Jiarui; Liu, Hongtao; Zhang, Wenna; Xu, Jingkun; Chen, Shuai (October 2020). "Effects of conductivity-enhancement reagents on self-healing properties of PEDOT:PSS films". Synthetic Metals. 268: 116503. doi:10.1016/j.synthmet.2020.116503. ISSN   0379-6779. S2CID   224922736.
  29. ↑ Sarabia-Riquelme, Ruben; Shahi, Maryam; Brill, Joseph W.; Weisenberger, Matthew C. (2019-07-08). "Effect of Drawing on the Electrical, Thermoelectrical, and Mechanical Properties of Wet-Spun PEDOT:PSS Fibers". ACS Applied Polymer Materials. 1 (8): 2157–2167. doi:10.1021/acsapm.9b00425. ISSN   2637-6105. S2CID   199176952.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.