The PIC16C84, PIC16F84 and PIC16F84A are 8-bit microcontrollers of which the PIC16C84 was the first introduced in 1993 [citation needed] and hailed [by whom?] as the first PIC microcontroller to feature a serial programming algorithm and EEPROM memory. [citation needed] It is a member of the PIC family of controllers, produced by Microchip Technology. The memory architecture makes use of bank switching. Software tools for assembler, debug and programming were only available for the Microsoft Windows operating system.[citation needed]
The PIC16x84 is a microcontroller in the PIC family of controllers produced by Microchip Technology (originally named " Arizona Microchip"). It was Microchip's first microcontroller that utilised "EEPROM" memory technology for the program memory. The use of "EEPROM" technology for program memory has now been disused in favour of "FLASH" memory that is considerably cheaper to manufacture, releases less toxins into the atmosphere and is much more reliable than "EEPROM". Both "EEPROM" and "FLASH" utilise similar forms of "floating gate" technologies to operate. The device features one 8-bit timer, and 13 I/O pins. The PIC16x84 became popular in many hobbyist applications because it uses a serial programming algorithm that lends itself to very simple programmers. Additionally, the PIC16C84 uses EEPROM memory, so it is easy to erase and requires no special tools to do so. The PIC16F84 and its updated version, the PIC16F84A both utilised FLASH program memory. The PIC16C84, PIC16C84A, PIC16F84 and the PIC16F84A all contain an additional 64 Bytes of EEPROM addressed from the "DATA" memory map. This additional memory is intended for use as "user data", hence the reason it can only be addressed from the "DATA" memory mapping.
F-version
The PIC16F84/PIC16F84A is an improved version of the PIC16C84, and almost completely compatible, with better program security and using flash memory instead of EEPROM memory for program memory. The PIC16F84/PIC16F84A has 68 bytes of RAM whilst the PIC16C84 has 36 bytes.
Since the two chips are so similar they are often referred to by the term PIC16x84 (x is used as a wildcard when referring to chips).
History
Two PIC16C84s on a false smart-card used in the nineties to decode the signals of Sky Television.
The PIC16C84 was introduced in 1993 and has been hailed as the first PIC microcontroller to feature a serial programming algorithm and EEPROM memory (it was preceded by the Motorola MC68HC805B6 and MC68HC805C4 along with the MC68HC11E2 with serial bootloader and EEPROM program storage released in the late 1980s). These chips lend themselves to hobby use: only a simple and cheap programmer is required to program, erase and reprogram the chip. As PIC16C84 supplies became limited due to it being discontinued, the PIC16F84 became popular as it is an almost drop-in replacement. New programming software was needed as the programming algorithm is different but the programming hardware required was the same.
Even later (1998) Microchip Technology introduced the improved PIC16F84A which allowed for faster clock speeds (up to 20MHz), faster programming, and decreased the current draw of the chip.
The PIC16x84 microcontroller is a member of Microchip's 14-bit series (the instruction word size is 14 bits for all instructions), making the '84 a good development prototype for other similar but cheaper one-time-programmable 14-bit devices.
Recent pin-compatible variants
Microchip's product line has gone through many revisions since the 16x84 and more powerful, flexible, cheaper pin-compatible PICs have been developed.
Existing PIC 16x84 code may require some modifications for these variants, namely making sure pins with multiple functions have been set up properly.
PIC 16F84A - 1K program memory, 68 bytes data memory, 64 bytes EEPROM, 1× timer (listed as a comparison)
A microcontroller is a small computer on a single metal-oxide-semiconductor (MOS) VLSI integrated circuit (IC) chip. A microcontroller contains one or more CPUs along with memory and programmable input/output peripherals. Program memory in the form of ferroelectric RAM, NOR flash or OTP ROM is also often included on chip, as well as a small amount of RAM. Microcontrollers are designed for embedded applications, in contrast to the microprocessors used in personal computers or other general purpose applications consisting of various discrete chips.
EEPROM (also called E2PROM) stands for electrically erasable programmable read-only memory and is a type of non-volatile memory used in computers, integrated in microcontrollers for smart cards and remote keyless systems, and other electronic devices to store relatively small amounts of data by allowing individual bytes to be erased and reprogrammed.
The Intel MCS-51 is a single chip microcontroller (MCU) series developed by Intel in 1980 for use in embedded systems. The architect of the Intel MCS-51 instruction set was John H. Wharton. Intel's original versions were popular in the 1980s and early 1990s, and enhanced binary compatible derivatives remain popular today. It is an example of a complex instruction set computer and has separate memory spaces for program instructions and data.
AVR is a family of microcontrollers developed since 1996 by Atmel, acquired by Microchip Technology in 2016. These are modified Harvard architecture 8-bit RISC single-chip microcontrollers. AVR was one of the first microcontroller families to use on-chip flash memory for program storage, as opposed to one-time programmable ROM, EPROM, or EEPROM used by other microcontrollers at the time.
PIC is a family of microcontrollers made by Microchip Technology, derived from the PIC1650 originally developed by General Instrument's Microelectronics Division. The name PIC initially referred to Peripheral Interface Controller, and is currently expanded as Programmable Intelligent Computer. The first parts of the family were available in 1976; by 2013 the company had shipped more than twelve billion individual parts, used in a wide variety of embedded systems.
The MSP430 is a mixed-signal microcontroller family from Texas Instruments, first introduced on 14 February 1992. Built around a 16-bit CPU, the MSP430 is designed for low cost and, specifically, low power consumption embedded applications.
PICAXE is a microcontroller system based on a range of Microchip PIC microcontrollers. PICAXE devices are Microchip PIC devices with pre-programmed firmware that enables bootloading of code directly from a PC, simplifying hobbyist embedded development. PICAXE devices have been produced by Revolution Education (Rev-Ed) since 1999.
In-system programming (ISP), or also called in-circuit serial programming (ICSP), is the ability of some programmable logic devices, microcontrollers, and other embedded devices to be programmed while installed in a complete system, rather than requiring the chip to be programmed prior to installing it into the system. It also allows firmware updates to be delivered to the on-chip memory of microcontrollers and related processors without requiring specialist programming circuitry on the circuit board, and simplifies design work.
Microchip Technology Inc. is a publicly-listed American corporation that manufactures microcontroller, mixed-signal, analog and Flash-IP integrated circuits. Its products include microcontrollers, Serial EEPROM devices, Serial SRAM devices, embedded security devices, radio frequency (RF) devices, thermal, power and battery management analog devices, as well as linear, interface and wireless products.
The Parallax P8X32A Propeller is a multi-core processor parallel computer architecture microcontroller chip with eight 32-bit reduced instruction set computer (RISC) central processing unit (CPU) cores. Introduced in 2006, it is designed and sold by Parallax, Inc.
DataFlash is a low pin-count serial interface for flash memory. It was developed as an Atmel proprietary interface, compatible with the SPI standard. In October 2012, the AT45 series DataFlash product lines, related intellectual property, and supporting employee teams were purchased by Adesto Technologies.
PICkit is a family of programmers for PIC microcontrollers made by Microchip Technology. They are used to program and debug microcontrollers, as well as program EEPROM. Some models also feature logic analyzer and serial communications (UART) tool.
STM32 is a family of 32-bit microcontroller integrated circuits by STMicroelectronics. The STM32 chips are grouped into related series that are based around the same 32-bit ARM processor core, such as the Cortex-M33F, Cortex-M7F, Cortex-M4F, Cortex-M3, Cortex-M0+, or Cortex-M0. Internally, each microcontroller consists of the processor core, static RAM, flash memory, debugging interface, and various peripherals.
LPC is a family of 32-bit microcontroller integrated circuits by NXP Semiconductors. The LPC chips are grouped into related series that are based around the same 32-bit ARM processor core, such as the Cortex-M4F, Cortex-M3, Cortex-M0+, or Cortex-M0. Internally, each microcontroller consists of the processor core, static RAM memory, flash memory, debugging interface, and various peripherals. The earliest LPC series were based on the Intel 8-bit 80C51 core. As of February 2011, NXP had shipped over one billion ARM processor-based chips.
ATtiny is a subfamily of the popular 8-bit AVR microcontrollers, which typically has fewer features, fewer I/O pins, and less memory than other AVR series chips. The first members of this family were released in 1999 by Atmel.
The following outline is provided as an overview of and topical guide to electronics:
The ATmega328 is a single-chip microcontroller created by Atmel in the megaAVR family. It has a modified Harvard architecture 8-bit RISC processor core.
RL78 Family is a 16-bit CPU core for embedded microcontrollers of Renesas Electronics introduced in 2010.
The MSP432 is a mixed-signal microcontroller family from Texas Instruments. It is based on a 32-bit ARM Cortex-M4F CPU, and extends their 16-bit MSP430 line, with a larger address space for code and data, and faster integer and floating point calculation than the MSP430. Like the MSP430, it has a number of built-in peripheral devices, and is designed for low power requirements. In 2021, TI confirmed that the MSP432 has been discontinued and "there will be no new MSP432 products".
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
