Packard Model G

Last updated

Packard Model G is a two cylinder car built in 1902 by the former American automobile manufacturer Ohio Automobile Company that changed name to Packard Motor Car Company in October, 1902.

Contents

At that time the company was located in Warren, Ohio; owners were brothers James Ward Packard and William Doud Packard and investor George Lewis Weiss. Model G was a development of the former single-cylinder cars the company had built since 1899 of which the last, Model F, was offered alongside the Model G. Introduction was in late summer 1902. Only four cars were built.

Chassis

The pressed steel frame of the Model G was new although it followed earlier principles. With a wheelbase of 91 in. (2,311 mm) it was the longest yet. Track was 56 in. (1,422 mm), in fact 0.5 in. (12.7 mm) less than Model F's. The car had the then-usual right hand steering. It was among the first US automobiles that featured a steering wheel instead of a tiller.

Road wheels were non-detachable and of the artillery wheel type. Each had 14 wood spokes. Front and rear wheels had the same dimensions with 36 x 4.5 in. pneumatic tires. Model G had very big wheels hubs which gave the car a characteristic look. Suspension consisted of a semi-elliptical leaf springs in front and elliptical at the rear. There were two brakes; one actuated the transmission by a lever outside of the bodywork that actuated, the other, operated by pedal, the differential.

Engine and Transmission

As with all Packards to date, the Model G's engine was placed under the driver's bench and laterally mounted, the crank protruding out of the right side. As mentioned, it was derived from the single-cylinder variant for which Packard already had a good reputation. Construction consisted of two single-cylinder engines that were connected in a horizontal opposed position and worked on a common crank shaft. Blocks were cast iron with non-detachable cylinder heads. Cylinders had a bore and stroke of 6 x 6 1/2 in. (152.4 × 165.1 mm) each, resulting in a displacement of 184 c.i (3,015 cm³) per cylinder and huge 368 c.i. (6,030 cm³) for the whole engine. Packard used a Longuemar float-feed carburetor for each cylinder. Ignition advance was manual. Power rating (following then-actual practice) was 24 H.P.

As introduced with the Model F, Model G also adopted a front-mounted, tough bigger, radiator. This led the car appear, together with the storage place behind it, as a front-engined automobile.

Gearbox was sliding gear, with three speeds forward plus reverse. Power transmission to the rear wheels worked via a single, center mounted chain which itself was connected to the differential.

Coachwork

Model G was a huge car for the time, weighing in at about 4,000 pounds (1,800 kg). Packard offered it with two body styles: Either as a four-passenger Surrey or an eight-passenger Tonneau (sometimes called a "Rear Tonneau Roadster"). The surrey had neither front nor rear doors and came with two forward-facing benches. The tonneau had one bench in front plus two more placed longitudally. Access to the ladder was by a small door in the rear. There were no front doors. Coachwork was made of high quality using wood, probably by a local carriage builder as with other Packards. The customer had a free choice of colors. Upholstery was of qual quality, executed with top grain leather.

Included with the base price were a pair of Dietz oil lamps, a Speed-O-Meter, and gauges for fuel and oil, each installed on the respective tank. An ignition switch was optional. The actual MSRP is not known but considering the smaller Model F tonneau being priced at $2,500 it is a close guess that the more complex Model G cost over $3,000.

Appreciation

While in 1902 alone, 179 Packard Model F left the plant in Warren, only 4 Model G were built. It marked a high- and terminal point for the Ohio Automobile Co. in many ways. It was the last Packard vastly developed by chief engineer and vice president William A. Hatcher who left the company January 17, 1903 because he did not agree with the direction the company took. His successor, Frenchman Charles Schmidt lead Packard to more modern, European construction principles.

Technically, Model G represents the end of the first generation Packards as it was the make's last buggy-styled passenger car (with the engine positioned under the driver's bench), the last with the noisy and not very reliable chain drive and, most important, the last with less than four cylinders. For a long time, J. W. Packard had been convinced that the single-cylinder engine was the power plant of the future. When it became obvious that the industry would lead another way, Packard followed suit with four-cylinder automobiles already in 1903. Thus, Model G remained the only passenger car with a twin (there also were some two-cylinder trucks), survived by the Model F by another year.

One of the customers who bought a Model G was William Rockefeller, younger brother of John D. Rockefeller. Of the four Model G's built, one still exists in a private collection. It is a surrey with a canopy and painted red.

Related Research Articles

The Adams Company is an American manufacturing concern. It was founded in 1883 and is based in Dubuque, Iowa, United States.

<span class="mw-page-title-main">Knox Automobile Company</span> Former American car manufacturer

The Knox Automobile Company was a manufacturer of automobiles in Springfield, Massachusetts, United States, between 1900 and 1914. Knox also built trucks and farm tractors until 1924. They are notable for building the very first modern fire engine in 1905.

<span class="mw-page-title-main">Mors (automobile)</span> Defunct French motor vehicle manufacturer

The Mors automobile factory was an early French car manufacturer. It was one of the first to take part in automobile racing, beginning in 1897, due to the belief of the company founder, Émile Mors, in racing's technical and promotional benefits. By the turn of the century, automobile racing had become largely a contest between Mors and Panhard et Levassor.

<span class="mw-page-title-main">Cadillac Runabout and Tonneau</span>

The first Cadillac automobiles were the 1903 Model built in the last quarter of 1902. These were 2-seater "horseless carriages" powered by a reliable and sturdy 10 hp (7 kW) single-cylinder engine developed by Henry Martyn Leland and built by Leland and Faulconer Manufacturing Company of Detroit, of which Henry Leland was founder, vice-president and general manager.

<span class="mw-page-title-main">Stearns-Knight</span> Defunct American motor vehicle manufacturer

F. B. Stearns and Company, later known as F. B. Stearns Company was an American manufacturer of luxury cars in Cleveland, Ohio marketed under the brand names Stearns from 1900 to 1911 then Stearns-Knight from 1911 until 1929.

<span class="mw-page-title-main">Union (automobile)</span> Motor vehicle

The Union automobile was a vehicle manufactured by the Union Automobile Company from 1902 until 1905. It was designed by John William Lambert, who had developed the three-wheel Buckeye gasoline buggy in 1891. Over the next decade, Lambert substantially refined the vehicle, with modifications including an additional wheel, a more powerful engine, and a new transmission system. The Union Automobile Company was formed as a subsidiary of Lambert's Buckeye Manufacturing Company solely to manufacture the Union, which took its name from Union City, Indiana, the city where it was built and which endorsed its production. In total, the company built over three hundred Union automobiles, before development shifted to the Lambert automobile, the Union's successor.

The Austin was a brass era American automobile manufactured in Grand Rapids, Michigan from 1901 to 1921. The company, founded by James E. Austin and his son Walter Austin, built large, expensive and powerful touring cars with an unusual double cantilever rear spring arrangement placing the rear wheels behind the passenger compartment, for a longer wheelbase to improve rider comfort in an era of rough roads as well as a unique two-speed rear axle.

The Success Automobile Manufacturing Company was a brass era United States automobile manufacturer, located at 532 De Ballviere Avenue, St. Louis, Missouri, in 1906.

<span class="mw-page-title-main">Midland Motor Company</span> Defunct American motor vehicle manufacturer

Midland Motor Company was an American brass era automobile manufacturer in Moline, Illinois from 1908 to 1913.

<span class="mw-page-title-main">Cole Motor Car Company</span> Car manufacturer

The Cole Motor Car Company was an early automobile maker based in Indianapolis, Indiana. Cole automobiles were built from 1908 until 1925. They were quality-built luxury cars. The make is a pioneer of the V-8 engine.

<span class="mw-page-title-main">Cunningham Car Company</span>

The Cunningham Car Company was a pioneering American production automobile manufacturer. Theirs was one of the earliest vehicles of the automotive age. Cunninghams were produced from 1896 to 1931 in Rochester, New York by James Cunningham, Son and Company who had been in the carriage manufacturing business since 1836.

The Reading and Meteor were American steam cars developed by Irvin D. Lengel in 1901 in Reading, Pennsylvania.

<span class="mw-page-title-main">Packard Four</span> Motor vehicle

The Packard Motor Car Company introduced their first four-cylinder engine in 1903 initially as a top level car along with the Packard Model F. It was their only automobile offered and exclusively used a four-cylinder engine from 1903 until 1912 and established Packard as a luxury car maker, and was replaced by the 1913 Packard Six.

<span class="mw-page-title-main">Multiplex (automobile)</span> Defunct American motor vehicle manufacturer

The Multiplex was an automobile built in Berwick, Pennsylvania by the Multiplex Manufacturing Company from 1912 to 1913.

<span class="mw-page-title-main">Buick Four</span> Car model

The Buick 4 was a series of passenger cars produced by the Buick Division of GM from 1909 through 1918, and was available as a touring car, phaeton or roadster. It was available with the Buick Model B as a larger alternative offering a larger engine and better durability. It became the junior sedan in 1914 when the Buick Six was introduced.

The Model 42 was an entry-level four seat passenger car produced by GM's Oldsmobile Division in 1914, offered as a replacement to the Oldsmobile Curved Dash runabout when it was discontinued in 1908, and was the junior platform to the Oldsmobile Six introduced in 1913. GM had acquired Elmore Manufacturing Company, Oldsmobile and Oakland Motor Car Company in 1908 and Cartercar and Rainier Motor Car Company in 1909 as their entry-level models, and Oldsmobile products were being repositioned in their new hierarchy as GM began to consolidate operations after William Durant had left.

The Series 22 Special was a four-seat passenger car produced by the Oldsmobile Division of GM in 1910 and 1911. It was the first car engineered by Oldsmobile after it became a division of GM and began sharing a platform with the Buick Model 10. It became the entry-level model for Oldsmobile, replacing the discontinued 1909 Model 20 and the 1909 Model D, while Oakland Motor Car Company became GM's entry level brand as Chevrolet didn't join GM until 1917.

<span class="mw-page-title-main">Oldsmobile Series 40</span> Car model

The Series 40 Defender was a four-seat passenger car produced by General Motors for its Oldsmobile division in 1912 and 1913, and was manufactured at Lansing Car Assembly in Lansing, Michigan. It continued to be the entry-level model for Oldsmobile, while Oakland Motor Car Company remained GM's entry level brand as Chevrolet didn't join GM until 1917. The Series 40 was the base model of three platforms sharing a platform with the Buick Model 10, with the mid-range Series 28 Autocrat, and the top level Series 23 Limited.

<span class="mw-page-title-main">Oldsmobile F-Series</span> Pre-WWII passenger car

The Oldsmobile F-Series was a pre-WWII passenger car built from the 1928 through 1938 model years. The first generation continued the tradition of adding a series number for each model year; F-28, F-29, F-30 and F-31. The second generation, signified by a completely new bodystyle appearance was built from 1932 through 1938, all having been manufactured in Lansing, Michigan. 1926 saw the introduction of GM's most recognized business model, the use of common platforms shared amongst the brands, and Oldsmobile and Buick shared the GM B platform. The F-Series was shared with the Buick Master Six and was also known as the Oldsmobile Six which was introduced as a name earlier in 1913.

<span class="mw-page-title-main">Oldsmobile Model X</span> Car model

The Model X was a four-seat passenger car produced by Oldsmobile in 1908, offered as an entry-level alternative to the Model D that appeared in 1901, replacing the Model M. It was the junior companion to the first six-cylinder sedan called the Oldsmobile Model Z also introduced in 1908, and shared most of its technology with the Model M.

References