Petra Nova is a carbon capture project designed to reduce carbon emissions from one of the boilers of a coal burning power plant in Thompsons, Texas. It is a multi-million dollar project taken up by NRG Energy and JX Nippon Oil to retrofit one of the boilers at their WA Parish Generating Station with a post-combustion carbon capture treatment system to treat a portion of the atmospheric exhaust emissions from the retrofitted boiler. [1]
The original coal-fired plant entered commercial service in 1977, and the new carbon emissions reduction system was first put into operation on January 10, 2017. The project was designed to annually capture approximately 33% of the carbon dioxide (CO2) (or 1.6 million tonnes) emissions from the plant's boiler #8. [2] [3]
The carbon dioxide gas was captured at 99% purity, and is then compressed and piped about 82 miles to the West Ranch Oil Field, where it is used for enhanced oil recovery. The oil field had previously been producing 300 barrels of oil per day. With the new injection of high pressure carbon dioxide into the field, the oil production of the field was increased by a factor of 50 to 15,000 barrels per day. [4] This project was expected to run for at least another 20 years. To satisfy the Clean Coal Power Initiative requirements, the Texas Bureau of Economic Geology put a monitoring plan in place to keep track of the injection and movement of the CO2 beneath the surface and in the rock structures at West Ranch. [4]
On May 1, 2020, NRG shut down Petra Nova, citing low oil prices during the COVID-19 pandemic. Due primarily to outages of the host natural gas cogeneration unit, the project missed its carbon sequestration goal by 17% over its first three years of operation. [5]
On September 14, 2022, Japan's Eneos Holdings Inc announced plans to acquire full ownership of Petra Nova Parish Holdings. JX Nippon Oil & Gas Exploration, Eneos' subsidiary, purchased the remaining 50% stake from NRG Energy Inc for $3.6 million. Eneos' strategy was to gain expertise in carbon capture, utilization, and storage (CCUS) technology through this move, and they announced plans to restart the unit in the second quarter of 2023. [6] On September 13, 2023, JX Nippon Oil & Gas Exploration Corporation announced the resumption of operations beginning on September 5, 2023. [7]
The Petra Nova carbon emissions reduction system uses an amine-based absorption system, or the KM CDR Process (Kansai Mitsubishi Carbon Dioxide Recovery). This process was developed by Mitsubishi Heavy Industries and Kansai Electric Power and utilizes a high performing proprietary solvent called KS-1. [8] The CO2 is removed from the exhaust gas through a basic absorber-stripper system. The gaseous CO2 is then compressed to a supercritical liquid. The CO2 leaving the carbon capture plant is over 99% pure and is sent 82 miles through 12-inch diameter pipes to their end location of the West Ranch oil field, where it is used for enhanced oil recovery. [4] The carbon dioxide from the Petra Nova Initiative will eventually end up in sandstone in the Frio Formation of the West Ranch oil field. It will remain about 5,000 feet underground and cover more than 4,000 acres of ground area. [4]
The Petra Nova carbon emissions reduction system cost approximately $1 billion to install, and received a nearly $190 million grant from the U.S. Government [9] under the Clean Coal Initiative, as well as a $250 million loan from the Japanese government. The increased oil recovery in the adjacent oil field was expected to result in a net savings. However, when the project was first proposed oil prices were very high (at $100 per barrel) and it was assumed that they would not drop. As of 2017, the current oil price was about $50 per barrel and therefore a net loss has resulted regarding the oil production at the field. [10] On May 1, 2020, NRG shut down Petra Nova, citing the low cost of oil as a result of the COVID-19 pandemic. [11]
Eneos Corporation, formerly JXTG Nippon Oil & Energy Corporation, or NOC or Shin-Nisseki (新日石) is a Japanese petroleum company. Its businesses include exploration, importation, and refining of crude oil; the manufacture and sale of petroleum products, including fuels and lubricants; and other energy-related activities. It is the largest oil company in Japan, and in recent years it has been expanding its operations in other countries.
A fossil fuel power station is a thermal power station which burns a fossil fuel, such as coal or natural gas, to produce electricity. Fossil fuel power stations have machinery to convert the heat energy of combustion into mechanical energy, which then operates an electrical generator. The prime mover may be a steam turbine, a gas turbine or, in small plants, a reciprocating gas engine. All plants use the energy extracted from the expansion of a hot gas, either steam or combustion gases. Although different energy conversion methods exist, all thermal power station conversion methods have their efficiency limited by the Carnot efficiency and therefore produce waste heat.
The National Energy Technology Laboratory (NETL) is a U.S. national laboratory under the Department of Energy Office of Fossil Energy. NETL focuses on applied research for the clean production and use of domestic energy resources. It performs research and development on the supply, efficiency, and environmental constraints of producing and using fossil energy resources while maintaining affordability.
Coal pollution mitigation, sometimes labeled as clean coal, is a series of systems and technologies that seek to mitigate health and environmental impact of burning coal for energy. Burning coal releases harmful substances, including mercury, lead, sulfur dioxide (SO2), nitrogen oxides (NOx), and carbon dioxide (CO2), contributing to air pollution, acid rain, and greenhouse gas emissions. Methods include flue-gas desulfurization, selective catalytic reduction, electrostatic precipitators, and fly ash reduction focusing on reducing the emissions of these harmful substances. These measures aim to reduce coal's impact on human health and the environment.
Carbon capture and storage (CCS) is a process in which a relatively pure stream of carbon dioxide (CO2) from industrial sources is separated, treated and transported to a long-term storage location. For example, the carbon dioxide stream that is to be captured can result from burning fossil fuels or biomass. Usually the CO2 is captured from large point sources, such as a chemical plant or biomass plant, and then stored in an underground geological formation. The aim is to reduce greenhouse gas emissions and thus mitigate climate change. The IPCC's most recent report on mitigating climate change describes CCS retrofits for existing power plants as one of the ways to limit emissions from the electricity sector and meet Paris Agreement goals.
Enhanced oil recovery, also called tertiary recovery, is the extraction of crude oil from an oil field that cannot be extracted otherwise. Although the primary and secondary recovery techniques rely on the pressure differential between the surface and the underground well, enhanced oil recovery functions by altering the chemical composition of the oil itself in order to make it easier to extract. EOR can extract 30% to 60% or more of a reservoir's oil, compared to 20% to 40% using primary and secondary recovery. According to the US Department of Energy, carbon dioxide and water are injected along with one of three EOR techniques: thermal injection, gas injection, and chemical injection. More advanced, speculative EOR techniques are sometimes called quaternary recovery.
An integrated gasification combined cycle (IGCC) is a technology using a high pressure gasifier to turn coal and other carbon based fuels into pressurized gas—synthesis gas (syngas). It can then remove impurities from the syngas prior to the electricity generation cycle. Some of these pollutants, such as sulfur, can be turned into re-usable byproducts through the Claus process. This results in lower emissions of sulfur dioxide, particulates, mercury, and in some cases carbon dioxide. With additional process equipment, a water-gas shift reaction can increase gasification efficiency and reduce carbon monoxide emissions by converting it to carbon dioxide. The resulting carbon dioxide from the shift reaction can be separated, compressed, and stored through sequestration. Excess heat from the primary combustion and syngas fired generation is then passed to a steam cycle, similar to a combined cycle gas turbine. This process results in improved thermodynamic efficiency, compared to conventional pulverized coal combustion.
Oxy-fuel combustion is the process of burning a fuel using pure oxygen, or a mixture of oxygen and recirculated flue gas, instead of air. Since the nitrogen component of air is not heated, fuel consumption is reduced, and higher flame temperatures are possible. Historically, the primary use of oxy-fuel combustion has been in welding and cutting of metals, especially steel, since oxy-fuel allows for higher flame temperatures than can be achieved with an air-fuel flame. It has also received a lot of attention in recent decades as a potential carbon capture and storage technology.
Carbon capture and storage (CCS) is a technology that can capture carbon dioxide CO2 emissions produced from fossil fuels in electricity, industrial processes which prevents CO2 from entering the atmosphere. Carbon capture and storage is also used to sequester CO2 filtered out of natural gas from certain natural gas fields. While typically the CO2 has no value after being stored, Enhanced Oil Recovery uses CO2 to increase yield from declining oil fields.
Enhanced coal bed methane recovery is a method of producing additional coalbed methane from a source rock, similar to enhanced oil recovery applied to oil fields. Carbon dioxide (CO2) injected into a bituminous coal bed would occupy pore space and also adsorb onto the carbon in the coal at approximately twice the rate of methane (CH4), allowing for potential enhanced gas recovery. This technique may be used in conjunction with carbon capture and storage in mitigation of global warming where the carbon dioxide that is sequestered is captured from the output of fossil fuel power plants.
The milestones for carbon capture and storage show the lack of commercial scale development and implementation of CCS over the years since the first carbon tax was imposed.
Bioenergy with carbon capture and storage (BECCS) is the process of extracting bioenergy from biomass and capturing and storing the carbon, thereby removing it from the atmosphere. BECCS can be a "negative emissions technology" (NET). The carbon in the biomass comes from the greenhouse gas carbon dioxide (CO2) which is extracted from the atmosphere by the biomass when it grows. Energy ("bioenergy") is extracted in useful forms (electricity, heat, biofuels, etc.) as the biomass is utilized through combustion, fermentation, pyrolysis or other conversion methods.
The Kędzierzyn Zero-Emission Power and Chemical Complex was a proposed facility in Kędzierzyn-Koźle, Poland. It was planned to combine the functions of power and heat generation with chemical production and carbon capture and storage. The project was proposed by a consortium of chemicals producers, including Zakłady Azotowe Kędzierzyn and the electricity company Południowy Koncern Energetyczny. The facility would have produced synthesis gas by gasification of hard coal. Gas produced by the plant would have been used for power and heat generation, or for the production of other chemicals. The carbon dioxide (CO2) produced by this plant would have been stored in natural geological reservoirs, or used as a raw material for the production of synthesis fuels, fertilizers or plastics.
Boundary Dam Power Station is the largest coal fired station owned by SaskPower, located near Estevan, Saskatchewan, Canada.
The Kemper Project, also called the Kemper County energy facility or Plant Ratcliffe, is a natural gas-fired electrical generating station currently under construction in Kemper County, Mississippi. Mississippi Power, a subsidiary of Southern Company, began construction of the plant in 2010. The initial, coal-fired project was central to President Obama's Climate Plan, as it was to be based on "clean coal" and was being considered for more support from the Congress and the incoming Trump Administration in late 2016. If it had become operational with coal, the Kemper Project would have been a first-of-its-kind electricity plant to employ gasification and carbon capture technologies at this scale.
Hydrogen Energy California (HECA) was an alternative energy, hydrogen power project in development with support from the U.S. Department of Energy in Kern County, California.
The W.A. Parish Generating Station is a 3.65-gigawatt, dual-fired power plant located near Thompsons, Texas. The station occupies a 4,664-acre site near Smithers Lake southwest of Houston in Fort Bend County and consists of two four-unit plants; one natural gas and the other coal. With a total installed capacity of 3,653 MW, it is the second largest conventional power station in the US, and supplies about fifteen percent of the energy in the Houston area. NRG Energy owns and operates the plant.
Mexico highly depends on the burning of its fossil fuels, and for the same reason, it is in its interest to look into mitigation solutions for its corresponding emissions. In the General Law on Climate Change on 2012, Mexico promised to reduce 20% of its greenhouse gas (GHG) emissions by 2020 and 50% by 2050, as well as in the Paris Agreement. 19% of this new mitigation plan will be dedicated to carbon capture and storage and specifically 10% to the energy industry.
Carbon capture and utilization (CCU) is the process of capturing carbon dioxide (CO2) from industrial processes and transporting it via pipelines to where one intends to use it in industrial processes.