Pinning force

Last updated

Pinning force is a force acting on a pinned object from a pinning center. In solid state physics, this most often refers to the vortex pinning, the pinning of the magnetic vortices (magnetic flux quanta, Abrikosov vortices) by different kinds of the defects in a type II superconductor. Important quantities are the individual maximal pinning force, which defines the depinning of a single vortex, and an average pinning force, which defines the depinning of the correlated vortex structures and can be associated with the critical current density (the maximal density of non-dissipative current). The interaction of the correlated vortex lattice with system of pinning centers forms the magnetic phase diagram of the vortex matter in superconductors. This phase diagram is especially rich for high temperature superconductors (HTSC) where the thermo-activation processes are essential.

The pinning mechanism is based on the fact that the amount of grain boundary area is reduced when a particle is located on a grain boundary. It is also assumed that particles are spherical and the particle-matrix interface is incoherent. When a moving grain boundary meets a particle at an angle , the particle exerts a pinning force on the grain boundary that is equal to ; with the particle radius and the energy per unit of grain boundary area. [1]

Related Research Articles

In physics, the cross section is a measure of probability that a specific process will take place in a collision of two particles. For example, the Rutherford cross-section is a measure of probability that an alpha-particle will be deflected by a given angle during a collision with an atomic nucleus. Cross section is typically denoted σ (sigma) and is expressed in terms of the transverse area that the incident particle must hit in order for the given process to occur.

Pauli matrices Matrices important in quantum mechanics and the study of spin

In mathematical physics and mathematics, the Pauli matrices are a set of three 2 × 2 complex matrices which are Hermitian and unitary. Usually indicated by the Greek letter sigma, they are occasionally denoted by tau when used in connection with isospin symmetries. They are

Crystal structure Ordered arrangement of atoms, ions, or molecules in a crystalline material

In crystallography, crystal structure is a description of the ordered arrangement of atoms, ions or molecules in a crystalline material. Ordered structures occur from the intrinsic nature of the constituent particles to form symmetric patterns that repeat along the principal directions of three-dimensional space in matter.

Magnetic flux surface integral of the magnetic flux density

In physics, specifically electromagnetism, the magnetic flux through a surface is the surface integral of the normal component of the magnetic field flux density B passing through that surface. The SI unit of magnetic flux is the weber, and the CGS unit is the maxwell. Magnetic flux is usually measured with a fluxmeter, which contains measuring coils and electronics, that evaluates the change of voltage in the measuring coils to calculate the measurement of magnetic flux.

The magnetic flux, represented by the symbol Φ, threading some contour or loop is defined as the magnetic field B multiplied by the loop area S, i.e. Φ = BS. Both B and S can be arbitrary and so is Φ. However, if one deals with the superconducting loop or a hole in a bulk superconductor, it turns out that the magnetic flux threading such a hole/loop is quantized. The (superconducting) magnetic flux quantumΦ0 = h/(2e)2.067833848...×10−15 Wb is a combination of fundamental physical constants: the Planck constant h and the electron charge e. Its value is, therefore, the same for any superconductor. The phenomenon of flux quantization was discovered experimentally by B. S. Deaver and W. M. Fairbank and, independently, by R. Doll and M. Näbauer, in 1961. The quantization of magnetic flux is closely related to the Little–Parks effect, but was predicted earlier by Fritz London in 1948 using a phenomenological model.

In physics, Ginzburg–Landau theory, often called Landau–Ginzburg theory, named after Vitaly Lazarevich Ginzburg and Lev Landau, is a mathematical physical theory used to describe superconductivity. In its initial form, it was postulated as a phenomenological model which could describe type-I superconductors without examining their microscopic properties. One GL-type superconductor is the famous YBCO, and generally all Cuprates.

The classical XY model is a lattice model of statistical mechanics. It is the special case of the n-vector model for n = 2.

Etendue or étendue is a property of light in an optical system, which characterizes how "spread out" the light is in area and angle. It corresponds to the beam parameter product (BPP) in Gaussian beam optics.

Superconducting quantum computing Quantum computing implementation

Superconducting quantum computing is an implementation of a quantum computer in superconducting electronic circuits. Research in superconducting quantum computing is conducted by Google, IBM, IMEC, BBN Technologies, Rigetti, and Intel. as of May 2016, up to nine fully controllable qubits are demonstrated in a 1D array, up to sixteen in a 2D architecture.

Abrikosov vortex vortex of supercurrent in a type-II superconductor theoretically predicted by Alexei Abrikosov in 1957

In superconductivity, an Abrikosov vortex is a vortex of supercurrent in a type-II superconductor theoretically predicted by Alexei Abrikosov in 1957. Abrikosov vortices occur generically in the Ginzburg–Landau theory of superconductivity, and can be explicitly demonstrated as solutions to that theory in a general mathematical setting, viz. as vortices in complex line bundles on Riemannian manifolds.

Type-II superconductor Superconductor characterized by the formation of magnetic vortices in an applied magnetic field

In superconductivity, a type-II superconductor is a superconductor which exhibits an intermediate phase of mixed ordinary and superconducting properties at intermediate temperature and fields above the superconducting phases. It also features the formation of magnetic field vortices with an applied external magnetic field. This occurs above a certain critical field strength Hc1. The vortex density increases with increasing field strength. At a higher critical field Hc2, superconductivity is destroyed. Type-II superconductors do not exhibit a complete Meissner effect.

Kinetic inductance is the manifestation of the inertial mass of mobile charge carriers in alternating electric fields as an equivalent series inductance. Kinetic inductance is observed in high carrier mobility conductors and at very high frequencies.

Quantum vortex Quantized flux circulation of some physical quantity

In physics, a quantum vortex represents a quantized flux circulation of some physical quantity. In most cases quantum vortices are a type of topological defect exhibited in superfluids and superconductors. The existence of quantum vortices was first predicted by Lars Onsager in 1949 in connection with superfluid helium. Onsager reasoned that quantisation of vorticity is a direct consequence of the existence of a superfluid order parameter as a spatially continuous wavefunction. Onsager also pointed out that quantum vortices describe the circulation of superfluid and conjectured that their excitations are responsible for superfluid phase transitions. These ideas of Onsager were further developed by Richard Feynman in 1955 and in 1957 were applied to describe the magnetic phase diagram of type-II superconductors by Alexei Alexeyevich Abrikosov. In 1935 Fritz London published a very closely related work on magnetic flux quantization in superconductors. London's fluxoid can also be viewed as a quantum vortex.

In a standard superconductor, described by a complex field fermionic condensate wave function, vortices carry quantized magnetic fields because the condensate wave function is invariant to increments of the phase by . There a winding of the phase by creates a vortex which carries one flux quantum. See quantum vortex.

Vortex lattice method

The Vortex lattice method, (VLM), is a numerical method used in computational fluid dynamics, mainly in the early stages of aircraft design and in aerodynamic education at university level. The VLM models the lifting surfaces, such as a wing, of an aircraft as an infinitely thin sheet of discrete vortices to compute lift and induced drag. The influence of the thickness, viscosity is neglected.

The Scherrer equation, in X-ray diffraction and crystallography, is a formula that relates the size of sub-micrometre crystallites in a solid to the broadening of a peak in a diffraction pattern. It is often referred to, incorrectly, as a formula for particle size measurement or analysis. It is named after Paul Scherrer. It is used in the determination of size of crystals in the form of powder.

Flamant solution

The Flamant solution provides expressions for the stresses and displacements in a linear elastic wedge loaded by point forces at its sharp end. This solution was developed by A. Flamant in 1892 by modifying the three-dimensional solution of Boussinesq.

Type-1.5 superconductors are multicomponent superconductors characterized by two or more coherence lengths, at least one of which is shorter than the magnetic field penetration length , and at least one of which is longer. This is in contrast to single-component superconductors, where there is only one coherence length and the superconductor is necessarily either type 1 or type 2. When placed in magnetic field, type-1.5 superconductors should form quantum vortices: magnetic-flux-carrying excitations. They allow magnetic field to pass through superconductors due to a vortex-like circulation of superconducting particles. In type-1.5 superconductors these vortices have long-range attractive, short-range repulsive interaction. As a consequence a type-1.5 superconductor in a magnetic field can form a phase separation into domains with expelled magnetic field and clusters of quantum vortices which are bound together by attractive intervortex forces. The domains of the Meissner state retain the two-component superconductivity, while in the vortex clusters one of the superconducting components is suppressed. Thus such materials should allow coexistence of various properties of type-I and type-II superconductors.

Macroscopic quantum phenomena refer to processes showing quantum behavior at the macroscopic scale, rather than at the atomic scale where quantum effects are prevalent. The best-known examples of macroscopic quantum phenomena are superfluidity and superconductivity; other examples include the quantum Hall effect, giant magnetoresistance and topological order. Since 2000 there has been extensive experimental work on quantum gases, particularly Bose–Einstein condensates.

A φ Josephson junction is a particular type of the Josephson junction, which has a non-zero Josephson phase φ across it in the ground state. A π Josephson junction, which has the minimum energy corresponding to the phase of π, is a specific example of it.

References

  1. Moelans, Nele (2006). Phase-field simulations of grain growth in materials.

See also