Polyglycolide

Last updated
Polyglycolide
PGA.png
Names
IUPAC name
Poly[oxy(1-oxo-1,2-ethanediyl)]
Identifiers
3D model (JSmol)
ChemSpider
  • none
ECHA InfoCard 100.249.865 OOjs UI icon edit-ltr-progressive.svg
UNII
  • *C(=O)CO*
Properties
(C2H2O2)n
Molar mass (58.04)n
Density 1.530 g/cm3 at 25 °C
Melting point 225 to 230 °C (437 to 446 °F; 498 to 503 K)
Boiling point Decomposes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

Polyglycolide or poly(glycolic acid) (PGA), also spelled as polyglycolic acid, is a biodegradable, thermoplastic polymer and the simplest linear, aliphatic polyester. It can be prepared starting from glycolic acid by means of polycondensation or ring-opening polymerization. PGA has been known since 1954 as a tough fiber-forming polymer. Owing to its hydrolytic instability, however, its use has initially been limited. [1] Currently polyglycolide and its copolymers (poly(lactic-co-glycolic acid) with lactic acid, poly(glycolide-co-caprolactone) with ε-caprolactone and poly (glycolide-co-trimethylene carbonate) with trimethylene carbonate) are widely used as a material for the synthesis of absorbable sutures and are being evaluated in the biomedical field. [2]

Contents

Physical properties

Polyglycolide has a glass transition temperature between 35 and 40 °C and its melting point is reported to be in the range of 225 to 230 °C. PGA also exhibits an elevated degree of crystallinity, around 45–55%, thus resulting in insolubility in water. [2] The solubility of this polyester is somewhat unusual, in that its high molecular weight form is insoluble in almost all common organic solvents (acetone, dichloromethane, chloroform, ethyl acetate, tetrahydrofuran), while low molecular weight oligomers sufficiently differ in their physical properties to be more soluble. However, polyglycolide is soluble in highly fluorinated solvents like hexafluoroisopropanol (HFIP) and hexafluoroacetone sesquihydrate, that can be used to prepare solutions of the high MW polymer for melt spinning and film preparation. [3] Fibers of PGA exhibit high strength and modulus (7 GPa) and are particularly stiff. [2]

Synthesis

Polyglycolide can be obtained through several different processes starting with different materials:

  1. polycondensation of glycolic acid;
  2. ring-opening polymerization of glycolide;
  3. solid-state polycondensation of halogenoacetates

Polycondensation of glycolic acid is the simplest process available to prepare PGA, but it is not the most efficient because it yields a low molecular weight product. Briefly, the procedure is as follows: glycolic acid is heated at atmospheric pressure and a temperature of about 175 to 185 °C is maintained until water ceases to distill. Subsequently, pressure is reduced to 150 mm Hg, still keeping the temperature unaltered for about two hours and the low MW polyglycolide is obtained. [4]

The most common synthesis used to produce a high molecular weight form of the polymer is ring-opening polymerization of "glycolide", the cyclic diester of glycolic acid. Glycolide can be prepared by heating under reduced pressure low MW PGA, collecting the diester by means of distillation. Ring-opening polymerization of glycolide can be catalyzed using different catalysts, including antimony compounds, such as antimony trioxide or antimony trihalides, zinc compounds (zinc lactate) and tin compounds like stannous octoate (tin(II) 2-ethylhexanoate) or tin alkoxides. Stannous octoate is the most commonly used initiator, since it is approved by the FDA as a food stabilizer. Usage of other catalysts has been disclosed as well, among these are aluminium isopropoxide, calcium acetylacetonate, and several lanthanide alkoxides (e.g. yttrium isopropoxide). [4] [5] [6] The procedure followed for ring-opening polymerization is briefly outlined: a catalytic amount of initiator is added to glycolide under a nitrogen atmosphere at a temperature of 195 °C. The reaction is allowed to proceed for about two hours, then temperature is raised to 230 °C for about half an hour. After solidification the resulting high MW polymer is collected. [4]

Ring-opening polymerization of glycolide to polyglycolide Pga synthesis.png
Ring-opening polymerization of glycolide to polyglycolide

Another procedure consists in the thermally induced solid-state polycondensation of halogenoacetates with general formula X-CH2COOM+ (where M is a monovalent metal like sodium and X is a halogen like chlorine), resulting in the production of polyglycolide and small crystals of a salt. Polycondensation is carried out by heating an halogenoacetate, like sodium chloroacetate, at a temperature between 160 and 180 °C, continuously passing nitrogen through the reaction vessel. During the reaction polyglycolide is formed along with sodium chloride which precipitates within the polymeric matrix; the salt can be conveniently removed by washing the product of the reaction with water. [7]

PGA can also be obtained by reacting carbon monoxide, formaldehyde or one of its related compounds like paraformaldehyde or trioxane, in presence of an acidic catalyst. In a carbon monoxide atmosphere an autoclave is loaded with the catalyst (chlorosulfonic acid), dichloromethane and trioxane, then it is charged with carbon monoxide until a specific pressure is reached; the reaction is stirred and allowed to proceed at a temperature of about 180 °C for two hours. Upon completion the unreacted carbon monoxide is discharged and a mixture of low and high MW polyglycolide is collected. [8]

Degradation

Polyglycolide is characterized by hydrolytic instability owing to the presence of the ester linkage in its backbone. The degradation process is erosive and appears to take place in two steps during which the polymer is converted back to its monomer glycolic acid: first water diffuses into the amorphous (non-crystalline) regions of the polymer matrix, cleaving the ester bonds; the second step starts after the amorphous regions have been eroded, leaving the crystalline portion of the polymer susceptible to hydrolytic attack. Upon collapse of the crystalline regions the polymer chain dissolves.

When exposed to physiological conditions, polyglycolide is degraded by random hydrolysis, and apparently it is also broken down by certain enzymes, especially those with esterase activity. The degradation product, glycolic acid, is nontoxic, but like ethylene glycol, it is metabolized to oxalic acid, which could make it dangerous. A part of the glycolic acid is also excreted by urine. [9]

Studies undergone using polyglycolide-made sutures have shown that the material loses half of its strength after two weeks and 100% after four weeks. The polymer is completely resorbed by the organism in a time frame of four to six months. [2] Degradation is faster in vivo than in vitro, this phenomenon thought to be due to cellular enzymatic activity. [10]

Uses

Sutures made from polyglycolic acid. These sutures are adsorbable and are degraded by the body over time. Polyglycolic acid suture ( PGA-Dexon) 01.JPG
Sutures made from polyglycolic acid. These sutures are adsorbable and are degraded by the body over time.

While known since 1954, PGA had found little use because of its sensitivity to hydrolysis when compared with other synthetic polymers. However, in 1962 this polymer was used to develop the first synthetic absorbable suture which was marketed under the tradename of Dexon [1] by the Davis & Geck subsidiary of the American Cyanamid Corporation. After its coating with polycaprolactone and calcium stearate it is being sold under the brand name of Assucryl.

PGA suture is classified as a synthetic, absorbable, braided multifilament. It is coated with N-laurin and L-lysine, which render the thread extremely smooth, soft and safe for knotting. It is also coated with magnesium stearate and finally sterilized with ethylene oxide gas. It is naturally degraded in the body by hydrolysis and is absorbed as water-soluble monomers, completed between 60 and 90 days. Elderly, anemic and malnourished patients may absorb the suture more quickly. Its color is either violet or undyed and it is sold in sizes USP 6-0 (1 metric) to USP 2 (5 metric). It has the advantages of high initial tensile strength, smooth passage through tissue, easy handling, excellent knotting ability, and secure knot tying. It is commonly used for subcutaneous sutures, intracutaneous closures, abdominal and thoracic surgeries.

The traditional role of PGA as a biodegradable suture material has led to its evaluation in other biomedical fields. Implantable medical devices have been produced with PGA, including anastomosis rings, pins, rods, plates and screws. [2] It has also been explored for tissue engineering or controlled drug delivery. Tissue engineering scaffolds made with polyglycolide have been produced following different approaches, but generally most of these are obtained through textile technologies in the form of non-woven felts.

The Kureha Chemical Industries has commercialized high molecular weight polyglycolide for food packaging applications under the tradename of Kuredux. [11] Production is at Belle, West Virginia, with an intended capacity of 4000 annual metric tons. [12] Its attributes as a barrier material result from its high degree of crystallization, the basis for a tortuous path mechanism for low permeability. It is anticipated that the high molecular weight version will have use as an interlayer between layers of polyethylene terephthalate to provide improved barrier protection for perishable foods, including carbonated beverages and foods that lose freshness on prolonged exposure to air. Thinner plastic bottles which still retain desirable barrier properties may also be enabled by this polyglycolide interlayer technology. A low molecular weight version (approximately 600 amu) is available from The Chemours Company (formerly part of DuPont) and is purported to be useful in oil and gas applications. [13]

Related Research Articles

<span class="mw-page-title-main">Polyhydroxybutyrate</span> Polymer

Polyhydroxybutyrate (PHB) is a polyhydroxyalkanoate (PHA), a polymer belonging to the polyesters class that are of interest as bio-derived and biodegradable plastics. The poly-3-hydroxybutyrate (P3HB) form of PHB is probably the most common type of polyhydroxyalkanoate, but other polymers of this class are produced by a variety of organisms: these include poly-4-hydroxybutyrate (P4HB), polyhydroxyvalerate (PHV), polyhydroxyhexanoate (PHH), polyhydroxyoctanoate (PHO) and their copolymers.

<span class="mw-page-title-main">Step-growth polymerization</span> Type of polymerization reaction mechanism

In polymer chemistry, step-growth polymerization refers to a type of polymerization mechanism in which bi-functional or multifunctional monomers react to form first dimers, then trimers, longer oligomers and eventually long chain polymers. Many naturally-occurring and some synthetic polymers are produced by step-growth polymerization, e.g. polyesters, polyamides, polyurethanes, etc. Due to the nature of the polymerization mechanism, a high extent of reaction is required to achieve high molecular weight. The easiest way to visualize the mechanism of a step-growth polymerization is a group of people reaching out to hold their hands to form a human chain—each person has two hands. There also is the possibility to have more than two reactive sites on a monomer: In this case branched polymers production take place.

<span class="mw-page-title-main">Polycaprolactone</span> Chemical compound

Polycaprolactone (PCL) is a synthetic, semi-crystalline, biodegradable polyester with a melting point of about 60 °C and a glass transition temperature of about −60 °C. The most common use of polycaprolactone is in the production of speciality polyurethanes. Polycaprolactones impart good resistance to water, oil, solvent and chlorine to the polyurethane produced.

<span class="mw-page-title-main">PLGA</span> Copolymer of varying ratios of polylactic acid and polyglycolic acid

PLGA, PLG, or poly(lactic-co-glycolic acid) is a copolymer which is used in a host of Food and Drug Administration (FDA) approved therapeutic devices, owing to its biodegradability and biocompatibility. PLGA is synthesized by means of ring-opening co-polymerization of two different monomers, the cyclic dimers (1,4-dioxane-2,5-diones) of glycolic acid and lactic acid. Polymers can be synthesized as either random or block copolymers thereby imparting additional polymer properties. Common catalysts used in the preparation of this polymer include tin(II) 2-ethylhexanoate, tin(II) alkoxides, or aluminum isopropoxide. During polymerization, successive monomeric units are linked together in PLGA by ester linkages, thus yielding a linear, aliphatic polyester as a product.

<span class="mw-page-title-main">Polylactic acid</span> Biodegradable polymer

Polylactic acid, also known as poly(lactic acid) or polylactide (PLA), is a thermoplastic polyester with backbone formula (C
3
H
4
O
2
)
n
or [–C(CH
3
)HC(=O)O–]
n
, formally obtained by condensation of lactic acid C(CH
3
)(OH)HCOOH
with loss of water. It can also be prepared by ring-opening polymerization of lactide [–C(CH
3
)HC(=O)O–]
2
, the cyclic dimer of the basic repeating unit.

<span class="mw-page-title-main">Polyester</span> Category of polymers, in which the monomers are joined together by ester links

Polyester is a category of polymers that contain the ester functional group in every repeat unit of their main chain. As a specific material, it most commonly refers to a type called polyethylene terephthalate (PET). Polyesters include naturally occurring chemicals, such as in plants and insects, as well as synthetics such as polybutyrate. Natural polyesters and a few synthetic ones are biodegradable, but most synthetic polyesters are not. Synthetic polyesters are used extensively in clothing.

An alpha hydroxy carboxylic acid or α-hydroxy carboxylic acid (AHA) is a carboxylic acid containing a hydroxy functional group separated by one carbon atoms. They are related to beta hydroxy acids, in which the two functional groups are separated by two carbon atoms. Prominent examples are glycolic acid, lactic acid, mandelic acid, and citric acid.

<span class="mw-page-title-main">Polydioxanone</span>

Polydioxanone or poly-p-dioxanone is a colorless, crystalline, biodegradable synthetic polymer.

<span class="mw-page-title-main">Biodegradable plastic</span> Plastics that can be decomposed by the action of living organisms

Biodegradable plastics are plastics that can be decomposed by the action of living organisms, usually microbes, into water, carbon dioxide, and biomass. Biodegradable plastics are commonly produced with renewable raw materials, micro-organisms, petrochemicals, or combinations of all three.

Polyanhydrides are a class of biodegradable polymers characterized by anhydride bonds that connect repeat units of the polymer backbone chain. Their main application is in the medical device and pharmaceutical industry. In vivo, polyanhydrides degrade into non-toxic diacid monomers that can be metabolized and eliminated from the body. Owing to their safe degradation products, polyanhydrides are considered to be biocompatible.

Biodegradable polymers are a special class of polymer that breaks down after its intended purpose by bacterial decomposition process to result in natural byproducts such as gases (CO2, N2), water, biomass, and inorganic salts. These polymers are found both naturally and synthetically made, and largely consist of ester, amide, and ether functional groups. Their properties and breakdown mechanism are determined by their exact structure. These polymers are often synthesized by condensation reactions, ring opening polymerization, and metal catalysts. There are vast examples and applications of biodegradable polymers.

Many opportunities exist for the application of synthetic biodegradable polymers in the biomedical area particularly in the fields of tissue engineering and controlled drug delivery. Degradation is important in biomedicine for many reasons. Degradation of the polymeric implant means surgical intervention may not be required in order to remove the implant at the end of its functional life, eliminating the need for a second surgery. In tissue engineering, biodegradable polymers can be designed such to approximate tissues, providing a polymer scaffold that can withstand mechanical stresses, provide a suitable surface for cell attachment and growth, and degrade at a rate that allows the load to be transferred to the new tissue. In the field of controlled drug delivery, biodegradable polymers offer tremendous potential either as a drug delivery system alone or in conjunction to functioning as a medical device.

Biodegradable additives are additives that enhance the biodegradation of polymers by allowing microorganisms to utilize the carbon within the polymer chain as a source of energy. Biodegradable additives attract microorganisms to the polymer through quorum sensing after biofilm creation on the plastic product. Additives are generally in masterbatch formation that use carrier resins such as polyethylene (PE), polypropylene (PP), polystyrene (PS) or polyethylene terephthalate (PET).

<span class="mw-page-title-main">Polyaspartic acid</span> Chemical compound

Polyaspartic acid (PASA) is a biodegradable, water-soluble condensation polymer based on the amino acid aspartic acid. It is a biodegradable replacement for water softeners and related applications. PASA can be chemically crosslinked with a wide variety of methods to yield PASA hydrogels. The resulting hydrogels are pH-sensitive such that under acidic conditions, they shrink, while the swelling capacity increases under alkaline conditions.

<span class="mw-page-title-main">Polybutylene succinate</span> Biodegradable polymer

Polybutylene succinate (PBS) is a thermoplastic polymer resin of the polyester family. PBS is a biodegradable aliphatic polyester with properties that are comparable to polypropylene.

Poly(ethylene adipate) Chemical compound

Poly(ethylene adipate) or PEA is an aliphatic polyester. It is most commonly synthesized from a polycondensation reaction between ethylene glycol and adipic acid. PEA has been studied as it is biodegradable through a variety of mechanisms and also fairly inexpensive compared to other polymers. Its lower molecular weight compared to many polymers aids in its biodegradability.

Polyorthoesters are polymers with the general structure –[–R–O–C(R1, OR2)–O–R3–]n– whereas the residue R2 can also be part of a heterocyclic ring with the residue R. Polyorthoesters are formed by transesterification of orthoesters with diols or by polyaddition between a diol and a diketene acetal, such as 3,9-diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane.

Polysuccinimide (PSI), also known as polyanhydroaspartic acid or polyaspartimide, is formed during the thermal polycondensation of aspartic acid and is the simplest polyimide. Polysuccinimide is insoluble in water, but soluble in some aprotic dipolar solvents. Its reactive nature makes polysuccinimide a versatile starting material for functional polymers made from renewable resources.

β-Butyrolactone Chemical compound

β-Butyrolactone is the intramolecular carboxylic acid ester (lactone) of the optically active 3-hydroxybutanoic acid. It is produced during chemical synthesis as a racemate. β-Butyrolactone is suitable as a monomer for the production of the biodegradable polyhydroxyalkanoate poly(3-hydroxybutyrate) (PHB). Polymerisation of racemic (RS)-β-butyrolactone provides (RS)-polyhydroxybutyric acid, which, however, is inferior in essential properties (e.g. strength or degradation behaviour) to the (R)-poly-3-hydroxybutyrate originating from natural sources.

<span class="mw-page-title-main">Poly(trimethylene carbonate)</span> Polycarbonate

Poly(trimethylene carbonate) (PTMC) is an aliphatic polycarbonate synthesized from the 6-membered cyclic carbonate, trimethylene carbonate (1,3-propylene carbonate or 1,3-Dioxan-2-one). Trimethylene carbonate (TMC) is a colorless crystalline solid with melting point ranging between 45°C and 48 °C and boiling point at 255°C (at 760 mmHg). TMC is originally synthesized from 1,3-propanediol with phosgene or carbon monoxide, which are highly poisonous gases. Another route is from the transesterification of 1,3-propanediol and dialkylcarbonates. This route is considered "greener" compared to the other one, since precursors can be obtained from renewable resources and carbon dioxide.

References

  1. 1 2 Gilding, D. K.; A. M. Reed (December 1979). "Biodegradable polymers for use in surgery - polyglycolic/poly (lactic acid) homo- and copolymers: 1". Polymer. 20 (12): 1459–1464. doi:10.1016/0032-3861(79)90009-0.
  2. 1 2 3 4 5 Middleton, J.; A. Tipton (March 1998). "Synthetic biodegradable polymers as medical devices". Medical Plastics and Biomaterials Magazine. Archived from the original on 2007-03-12. Retrieved 2006-07-04.
  3. Schmitt, E.: "Polyglycolic acid in solutions", U.S. Pat 3 737 440, 1973
  4. 1 2 3 Lowe, C. E.: "Preparation of high molecular weight polyhydroxyacetic ester", U.S. Pat 2 668 162, 1954
  5. Bero, Maciej; Piotr Dobrzynski; Janusz Kasperczyk (18 June 1999). "Application of Calcium Acetylacetonate to the Polymerization of Glycolide and Copolymerization of Glycolide with ε-Caprolactone and L-Lactide". Macromolecules. ACS. 32 (14): 4735–4737. Bibcode:1999MaMol..32.4735D. doi:10.1021/ma981969z.
  6. Stridsberg, Kajsa M.; Maria Ryner; Ann-Christine Albertsson (2002). Controlled Ring-Opening Polymerization: Polymers with designed Macromolecular Architecture. Advances in Polymer Science. Vol. 157. Springer. pp. 41–65. doi:10.1007/3-540-45734-8_2. ISBN   978-3-540-42249-5.
  7. Epple, Matthias; Epple, Matthias (1999). "A detailed characterization of polyglycolide prepared by solid-state polycondensation reaction". Macromolecular Chemistry and Physics. Wiley. 200 (10): 2221–2229. doi:10.1002/(SICI)1521-3935(19991001)200:10<2221::AID-MACP2221>3.0.CO;2-Q.
  8. Masuda et al.: "Biodegradable plastic composition", U.S. Pat 5 227 415, 1993
  9. Gunatillake, Pathiraja A.; Raju Adhikari (2003). "Biodegradable Synthetic Polymers for tissue engineering" (PDF). European Cells and Materials. 5: 1–16. doi: 10.22203/eCM.v005a01 (inactive 2024-02-19). PMID   14562275. Archived (PDF) from the original on 2017-07-13. Retrieved 2015-02-08.{{cite journal}}: CS1 maint: DOI inactive as of February 2024 (link)
  10. Tiberiu Niță (Mar 2011). "Concepts in biological analysis of resorbable materials in oro-maxillofacial surgery". Rev. chir. oro-maxilo-fac. implantol. (in Romanian). 2 (1): 33–38. ISSN   2069-3850. 23. Retrieved 2012-06-06.[ permanent dead link ](webpage has a translation button)
  11. Kuredux® Polyglycolic Acid (PGA) Resin Archived 2020-12-09 at the Wayback Machine www.kureha.com, accessed 4 December 2021
  12. "Kureha Corporation Polyglycolic Acid Plant". Archived from the original on 2020-12-09. Retrieved 2011-03-06.
  13. "DuPont_Polyglycolic_Acid_Sheet.pdf" (PDF). Archived from the original (PDF) on 2011-05-11. Retrieved 2011-02-18.