Pumpherston retort

Last updated

Pumpherston retort
Process typechemical
Industrial sector(s) oil shale industry
Feedstock oil shale
Product(s) shale oil, oil shale gas, ammonia
Leading companiesPumpherston Oil Company
InventorWilliam Fraser, James Bryson, James Jones
Year of invention1894

The Pumpherston retort (also known as the Bryson retort) was a type of oil-shale retort used in Britain at the end of 19th and beginning of 20th century. It marked separation of the oil-shale industry from the coal industry as it was designed specifically for oil-shale retorting. [1] The retort is named after Pumpherston, West Lothian, which was one of the major oil shale areas in Great Britain. The retort was commercialized by Pumpherston Oil Company.

Contents

History

The Pumpherston retort was invented and patented in 1894 by William Fraser, James Bryson, and James Jones of Pumpherston Oil Company. [2] By 1910, 1,528 Pumpherston retorts were used in Scotland. [1] In addition, the retort was used in Spain and Australia. [3]

The Pumpherson design was used at Newnes and Torbane, in Australia, by Commonwealth Oil Corporation. The retorts at Newnes were later modified, by adding more off-takes, to make it better suited to oil-rich shale, by John Fell. The resulting design variant was patented by Fell, and was referred to as a 'modified Pumpherson' or 'Fell' retort. [4] [5] [6] [7] [8] That modified design was also used at Glen Davis. [4] [9]

Design

The Pumpherston retort was a 35 feet (11 m) high cylindrical vessel containing two main sections. [10] The upper section was made of iron and the lower section was made of fire bricks. The raw oil shale was fed on the top of retort. Shale oil and oil shale gas were distilled at the upper section at the temperature of 750 to 900 °F (399 to 482 °C). At the lower section, the heat rose to 1,300 °F (704 °C) and steam was added to produce ammonia. The process required approximately 1,000 imperial barrels (160,000 L; 36,000 imp gal; 43,000 US gal) of water equivalent of steam per one ton of oil shale. [1] [10] [11]

The retort had a 15 ton capacity, and the residence time was 24 hours. It was started up by combustion of coal, but after the process started it was switched to the produced oil shale gas. [1]

Related Research Articles

<span class="mw-page-title-main">Oil shale</span> Organic-rich fine-grained sedimentary rock containing kerogen

Oil shale is an organic-rich fine-grained sedimentary rock containing kerogen from which liquid hydrocarbons can be produced. In addition to kerogen, general composition of oil shales constitutes inorganic substance and bitumens. Based on their deposition environment, oil shales are classified as marine, lacustrine and terrestrial oil shales. Oil shales differ from oil-bearing shales, shale deposits that contain petroleum that is sometimes produced from drilled wells. Examples of oil-bearing shales are the Bakken Formation, Pierre Shale, Niobrara Formation, and Eagle Ford Formation. Accordingly, shale oil produced from oil shale should not be confused with tight oil, which is also frequently called shale oil.

<span class="mw-page-title-main">Pumpherston</span> Human settlement in Scotland

Pumpherston is a village in West Lothian, Scotland. Originally a small industrial village housing works for the nearby shale mine and works, it now forms the eastern part of the new town of Livingston, which was constructed to the west of Pumpherston in the late 1960s and quickly grew to incorporate Pumpherston in its wider urban settlement, as defined by the General Register Office for Scotland (GROS). The village of Uphall Station lies immediately to the north. It is twinned with the village of Mtarfa, Malta.

Shale oil is an unconventional oil produced from oil shale rock fragments by pyrolysis, hydrogenation, or thermal dissolution. These processes convert the organic matter within the rock (kerogen) into synthetic oil and gas. The resulting oil can be used immediately as a fuel or upgraded to meet refinery feedstock specifications by adding hydrogen and removing impurities such as sulfur and nitrogen. The refined products can be used for the same purposes as those derived from crude oil.

<span class="mw-page-title-main">Newnes, New South Wales</span> Town in New South Wales, Australia

Newnes, an abandoned oil shale mining site of the Wolgan Valley, is located in the Central Tablelands region of New South Wales, Australia. The site that was operational in the early 20th century is now partly surrounded by Wollemi National Park. The settlement was originally built by the Commonwealth Oil Corporation.

<span class="mw-page-title-main">Glen Davis, New South Wales</span> Town in New South Wales, Australia

Glen Davis is a village in the Central Tablelands of New South Wales, Australia. The village is located in the local government area of the City of Lithgow. It is located 250 km north-west of Sydney and approximately 80 kilometres north of Lithgow. The name is also applied to the surrounding area, for postal and statistical purposes. In the 2006 census, Glen Davis had a population of 354 but this fell to 115 in the 2016 census.

<span class="mw-page-title-main">Shale oil extraction</span> Process for extracting oil from oil shale

Shale oil extraction is an industrial process for unconventional oil production. This process converts kerogen in oil shale into shale oil by pyrolysis, hydrogenation, or thermal dissolution. The resultant shale oil is used as fuel oil or upgraded to meet refinery feedstock specifications by adding hydrogen and removing sulfur and nitrogen impurities.

Oil shale economics deals with the economic feasibility of oil shale extraction and processing. Although usually oil shale economics is understood as shale oil extraction economics, the wider approach evaluates usage of oil shale as a whole, including for the oil-shale-fired power generation and production of by-products during retorting or shale oil upgrading processes.

<span class="mw-page-title-main">History of the oil shale industry</span> Timeline of the production of oil shale

The history of the oil shale industry started in ancient times. The modern industrial use of oil shale for oil extraction dates to the mid-19th century and started growing just before World War I because of the mass production of automobiles and trucks and the supposed shortage of gasoline for transportation needs. Between the World Wars oil shale projects were begun in several countries.

Oil shale in China is an important source of unconventional oil. A total Chinese oil shale resource amounts of 720 billion tonnes, located in 80 deposits of 47 oil shale basins. This is equal to 48 billion tonnes of shale oil. At the same time there are speculations that the actual resource may even exceed the oil shale resource of the United States.

Alexander François Selligue (1784-1845) was a French engineer. His name was in fact Alexandre François Gilles, but he used Selligue as an anagram of Gilles.

The Nevada–Texas–Utah retort process was an above-ground shale oil extraction technology to produce shale oil, a type of synthetic crude oil. It heated oil shale in a sealed vessel (retort) causing its decomposition into shale oil, oil shale gas and spent residue. The process was developed in the 1920s and used for shale oil production in the United States and in Australia. The process was simple to operate; however, it was ceased from the operation because of a small capacity and labor extensiveness.

<span class="mw-page-title-main">Alexander Carnegie Kirk</span> British engineer

Alexander Carnegie Kirk was a British engineer responsible for several major innovations in the shipbuilding, refrigeration, and oil shale industries of the 19th century. Kirk, born in Barry, Angus, received his formal education at the University of Edinburgh and a technical education at plants operated by Robert Napier and Sons.

There are oil shale deposits in Australia which range from small deposits to large reserves. Deposits, varying by their age and origin, are located in about a third of eastern Australia. In 2012, the demonstrated oil shale reserves were estimated at 58 billion tonnes. The easiest to recover deposits are located in Queensland.

<span class="mw-page-title-main">Glen Davis Shale Oil Works</span> Oil extraction plant

The Glen Davis Shale Oil Works was a shale oil extraction plant, in the Capertee Valley, at Glen Davis, New South Wales, Australia, which operated from 1940 until 1952. It was the last oil-shale operation in Australia, until the Stuart Oil Shale Project in the late 1990s. For the period of 1965–1952, it provided one fifth of the shale oil produced in Australia.

The history of the oil shale industry in the United States goes back to the 1850s; it dates back farther as a major enterprise than the petroleum industry. But although the United States contains the world's largest known resource of oil shale, the US has not been a significant producer of shale oil since 1861. There were three major past attempts to establish an American oil shale industry: the 1850s; in the years during and after World War I; and in the 1970s and early 1980s. Each time, the oil shale industry failed because of competition from cheaper petroleum.

Commonwealth Oil Corporation Limited was a British-owned Australian company associated with the production and refining of petroleum products derived from oil shale, during the early years of the 20th century. It is associated with Newnes, Hartley Vale, and Torbane, all in New South Wales. It should not be confused with Commonwealth Oil Refineries, which was a completely separate company, established in 1920, that refined imported crude oil from 1924.

Torbane was a privately-owned village lying within the area now known as Capertee, in the Local Government Area of the City of Lithgow, within the Central West region of New South Wales, Australia. There was also another village, Airly, nearby. Both villages were associated with the mining of oil shale. The mine associated with Torbane was known as the New Hartley Mine. and that associated with Airly was known as the Genowlan Mine. There were retorts that produced crude shale oil at Torbane. Both Torbane and Airly are now ghost towns.

<span class="mw-page-title-main">George Francis Davis</span>

Sir George Francis Davis was a New Zealand born industrialist. He is notable mainly for his association with Davis Gelatine, Cockatoo Island Dockyard, and the Glen Davis Shale Oil Works, in Australia. Glen Davis, New South Wales is named after him.

<span class="mw-page-title-main">John Fell (industrialist)</span>

John Wilson Fell (1862–1955) was an industrialist involved in the shale oil operations at Newnes, New South Wales and the establishment of two early oil refineries, on Gore Bay at Greenwich and at Clyde, both suburbs of Sydney. He was the principal of John Fell & Company and was, for many years, the Managing Director of Commonwealth Oil Corporation, which he revived from receivership.

The New South Wales Shale and Oil Company — established in 1872, by the merging of two earlier ventures — mined and processed oil shale to produce kerosene, paraffin wax and candles, and other petroleum products, in New South Wales Australia. It is particularly associated with the sites of its former works, at Hartley Vale and Torbane. Its assets were bought by Commonwealth Oil Corporation in 1906.

References

  1. 1 2 3 4 Louw, S.J.; Addison, J. (1985). Seaton, A. (ed.). "Studies of the Scottish oil shale industry. Vol.1 History of the industry, working conditions, and mineralogy of Scottish and Green River formation shales. Final report on US Department of Energy" (PDF). Institute of Occupational Medicine. pp. 38, 53–56. DE-ACO2 – 82ER60036. Archived from the original (PDF) on 26 July 2011. Retrieved 28 November 2009.
  2. Talbot, Frederick Arthur (2007). The Oil Conquest of the World. READ BOOKS. pp. 182–193. ISBN   978-1-4086-1045-9 . Retrieved 28 November 2009.
  3. United States Office of Technology Assessment (June 1980). An Assessment of Oil Shale Technologies (PDF). DIANE Publishing. p. 138. ISBN   978-1-4289-2463-5. NTIS order #PB80-210115. Retrieved 28 November 2009.
  4. 1 2 "Shale Processing". Sydney Morning Herald. 12 January 1951. p. 2. Retrieved 26 April 2022.
  5. "Ghost Towns: Newnes". visitsydneyaustralia.com.au. Retrieved 4 April 2022.
  6. "Newnes Oil Shale - Wollemi National Park". www.geomaps.com.au. Retrieved 4 April 2022.
  7. "Newnes Retorts". Sun. 3 July 1932. p. 9. Retrieved 4 April 2022.
  8. "TO WORK AGAIN". Sydney Morning Herald. 16 December 1914. p. 10. Retrieved 13 April 2022.
  9. Mainwaring, Ross (July 1993). "Glen Davis Oil Shale Works" (PDF). Light Railways. The Light Railway Research Society of Australia. XXX (121).
  10. 1 2 Alderson, Victor Clifton (2009). The Oil Shale Industry. BiblioBazaar. p. 68. ISBN   978-1-103-27580-9 . Retrieved 28 November 2009.
  11. Hull, Thomas (2009). Oils, Fats and Fuels. READ BOOKS. p. 61. ISBN   978-1-4067-4163-6 . Retrieved 28 November 2009.