Range of a projectile

Last updated
The path of this projectile launched from a height y0 has a range d. ProjectileRange.svg
The path of this projectile launched from a height y0 has a range d.

In physics, a projectile launched with specific initial conditions will have a range. It may be more predictable assuming a flat Earth with a uniform gravity field, and no air resistance. The horizontal ranges of a projectile are equal for two complementary angles of projection with the same velocity.

Contents

The following applies for ranges which are small compared to the size of the Earth. For longer ranges see sub-orbital spaceflight. The maximum horizontal distance traveled by the projectile, neglecting air resistance, can be calculated as follows: [1]

where

If y0 is taken to be zero, meaning that the object is being launched on flat ground, the range of the projectile will simplify to:

Ideal projectile motion

Ideal projectile motion states that there is no air resistance and no change in gravitational acceleration. This assumption simplifies the mathematics greatly, and is a close approximation of actual projectile motion in cases where the distances travelled are small. Ideal projectile motion is also a good introduction to the topic before adding the complications of air resistance.

Derivations

A launch angle of 45 degrees displaces the projectile the farthest horizontally. This is due to the nature of right triangles. Additionally, from the equation for the range :

We can see that the range will be maximum when the value of is the highest (i.e. when it is equal to 1). Clearly, has to be 90 degrees. That is to say, is 45 degrees.

Flat ground

Range of a projectile (in space). Gittata - Range of a projectile.png
Range of a projectile (in space).

First we examine the case where (y0) is zero. The horizontal position of the projectile is

In the vertical direction

We are interested in the time when the projectile returns to the same height it originated. Let tg be any time when the height of the projectile is equal to its initial value.

By factoring:

or

but t = T = time of flight

The first solution corresponds to when the projectile is first launched. The second solution is the useful one for determining the range of the projectile. Plugging this value for (t) into the horizontal equation yields

Applying the trigonometric identity

If x and y are same,

allows us to simplify the solution to

Note that when (θ) is 45°, the solution becomes

Uneven ground

Now we will allow (y0) to be nonzero. Our equations of motion are now

and

Once again we solve for (t) in the case where the (y) position of the projectile is at zero (since this is how we defined our starting height to begin with)

Again by applying the quadratic formula we find two solutions for the time. After several steps of algebraic manipulation

The square root must be a positive number, and since the velocity and the sine of the launch angle can also be assumed to be positive, the solution with the greater time will occur when the positive of the plus or minus sign is used. Thus, the solution is

Solving for the range once again

To maximize the range at any height

Checking the limit as approaches 0

Angle of impact

The angle ψ at which the projectile lands is given by:

For maximum range, this results in the following equation:

Rewriting the original solution for θ, we get:

Multiplying with the equation for (tan ψ)^2 gives:

Because of the trigonometric identity

,

this means that θ + ψ must be 90 degrees.

Actual projectile motion

In addition to air resistance, which slows a projectile and reduces its range, many other factors also have to be accounted for when actual projectile motion is considered.

Projectile characteristics

Generally speaking, a projectile with greater volume faces greater air resistance, reducing the range of the projectile. (And see Trajectory of a projectile.) Air resistance drag can be modified by the projectile shape: a tall and wide, but short projectile will face greater air resistance than a low and narrow, but long, projectile of the same volume. The surface of the projectile also must be considered: a smooth projectile will face less air resistance than a rough-surfaced one, and irregularities on the surface of a projectile may change its trajectory if they create more drag on one side of the projectile than on the other. However, certain irregularities such as dimples on a golf ball may actually increase its range by reducing the amount of turbulence caused behind the projectile as it travels.[ citation needed ] Mass also becomes important, as a more massive projectile will have more kinetic energy, and will thus be less affected by air resistance. The distribution of mass within the projectile can also be important, as an unevenly weighted projectile may spin undesirably, causing irregularities in its trajectory due to the magnus effect.

If a projectile is given rotation along its axes of travel, irregularities in the projectile's shape and weight distribution tend to be cancelled out. See rifling for a greater explanation.

Firearm barrels

For projectiles that are launched by firearms and artillery, the nature of the gun's barrel is also important. Longer barrels allow more of the propellant's energy to be given to the projectile, yielding greater range. Rifling, while it may not increase the average (arithmetic mean) range of many shots from the same gun, will increase the accuracy and precision of the gun.

Very large ranges

Some cannons or howitzers have been created with a very large range.

During World War I the Germans created an exceptionally large cannon, the Paris Gun, which could fire a shell more than 80 miles (130 km). North Korea has developed a gun known in the West as Koksan, with a range of 60 km using rocket-assisted projectiles. (And see Trajectory of a projectile.)

Such cannons are distinguished from rockets, or ballistic missiles, which have their own rocket engines, which continue to accelerate the missile for a period after they have been launched.

See also

Related Research Articles

<span class="mw-page-title-main">Spherical coordinate system</span> 3-dimensional coordinate system

In mathematics, a spherical coordinate system is a coordinate system for three-dimensional space where the position of a point is specified by three numbers: the radial distance of that point from a fixed origin; its polar angle measured from a fixed polar axis or zenith direction; and the azimuthal angle of its orthogonal projection on a reference plane that passes through the origin and is orthogonal to the fixed axis, measured from another fixed reference direction on that plane. When radius is fixed, the two angular coordinates make a coordinate system on the sphere sometimes called spherical polar coordinates.

In electrodynamics, elliptical polarization is the polarization of electromagnetic radiation such that the tip of the electric field vector describes an ellipse in any fixed plane intersecting, and normal to, the direction of propagation. An elliptically polarized wave may be resolved into two linearly polarized waves in phase quadrature, with their polarization planes at right angles to each other. Since the electric field can rotate clockwise or counterclockwise as it propagates, elliptically polarized waves exhibit chirality.

In linear algebra, two vectors in an inner product space are orthonormal if they are orthogonal unit vectors. A set of vectors form an orthonormal set if all vectors in the set are mutually orthogonal and all of unit length. An orthonormal set which forms a basis is called an orthonormal basis.

<span class="mw-page-title-main">Trajectory</span> Path of a moving object

A trajectory or flight path is the path that an object with mass in motion follows through space as a function of time. In classical mechanics, a trajectory is defined by Hamiltonian mechanics via canonical coordinates; hence, a complete trajectory is defined by position and momentum, simultaneously.

<span class="mw-page-title-main">Inverse trigonometric functions</span> Inverse functions of the trigonometric functions

In mathematics, the inverse trigonometric functions are the inverse functions of the trigonometric functions. Specifically, they are the inverses of the sine, cosine, tangent, cotangent, secant, and cosecant functions, and are used to obtain an angle from any of the angle's trigonometric ratios. Inverse trigonometric functions are widely used in engineering, navigation, physics, and geometry.

<span class="mw-page-title-main">Rabi cycle</span> Quantum mechanical phenomenon

In physics, the Rabi cycle is the cyclic behaviour of a two-level quantum system in the presence of an oscillatory driving field. A great variety of physical processes belonging to the areas of quantum computing, condensed matter, atomic and molecular physics, and nuclear and particle physics can be conveniently studied in terms of two-level quantum mechanical systems, and exhibit Rabi flopping when coupled to an optical driving field. The effect is important in quantum optics, magnetic resonance and quantum computing, and is named after Isidor Isaac Rabi.

<span class="mw-page-title-main">Cissoid of Diocles</span> Cubic plane curve

In geometry, the cissoid of Diocles is a cubic plane curve notable for the property that it can be used to construct two mean proportionals to a given ratio. In particular, it can be used to double a cube. It can be defined as the cissoid of a circle and a line tangent to it with respect to the point on the circle opposite to the point of tangency. In fact, the curve family of cissoids is named for this example and some authors refer to it simply as the cissoid. It has a single cusp at the pole, and is symmetric about the diameter of the circle which is the line of tangency of the cusp. The line is an asymptote. It is a member of the conchoid of de Sluze family of curves and in form it resembles a tractrix.

<span class="mw-page-title-main">Projectile motion</span> Motion of launched objects due to gravity


Projectile motion is a form of motion experienced by an object or particle that is projected in a gravitational field, such as from Earth's surface, and moves along a curved path under the action of gravity only. In the particular case of projectile motion on Earth, most calculations assume the effects of air resistance are passive and negligible. The curved path of objects in projectile motion was shown by Galileo to be a parabola, but may also be a straight line in the special case when it is thrown directly upward or downward. The study of such motions is called ballistics, and such a trajectory is a ballistic trajectory. The only force of mathematical significance that is actively exerted on the object is gravity, which acts downward, thus imparting to the object a downward acceleration towards the Earth’s center of mass. Because of the object's inertia, no external force is needed to maintain the horizontal velocity component of the object's motion. Taking other forces into account, such as aerodynamic drag or internal propulsion, requires additional analysis. A ballistic missile is a missile only guided during the relatively brief initial powered phase of flight, and whose remaining course is governed by the laws of classical mechanics.

<span class="mw-page-title-main">Tangent half-angle formula</span> Relates the tangent of half of an angle to trigonometric functions of the entire angle

In trigonometry, tangent half-angle formulas relate the tangent of half of an angle to trigonometric functions of the entire angle. The tangent of half an angle is the stereographic projection of the circle onto a line. Among these formulas are the following:

<span class="mw-page-title-main">Strophoid</span> Geometric curve constructed from another curve and two points

In geometry, a strophoid is a curve generated from a given curve C and points A and O as follows: Let L be a variable line passing through O and intersecting C at K. Now let P1 and P2 be the two points on L whose distance from K is the same as the distance from A to K. The locus of such points P1 and P2 is then the strophoid of C with respect to the pole O and fixed point A. Note that AP1 and AP2 are at right angles in this construction.

In geometry, various formalisms exist to express a rotation in three dimensions as a mathematical transformation. In physics, this concept is applied to classical mechanics where rotational kinematics is the science of quantitative description of a purely rotational motion. The orientation of an object at a given instant is described with the same tools, as it is defined as an imaginary rotation from a reference placement in space, rather than an actually observed rotation from a previous placement in space.

There are several equivalent ways for defining trigonometric functions, and the proof of the trigonometric identities between them depend on the chosen definition. The oldest and somehow the most elementary definition is based on the geometry of right triangles. The proofs given in this article use this definition, and thus apply to non-negative angles not greater than a right angle. For greater and negative angles, see Trigonometric functions.

<span class="mw-page-title-main">Lateral earth pressure</span> Pressure of soil in horizontal direction

Lateral earth pressure is the pressure that soil exerts in the horizontal direction. The lateral earth pressure is important because it affects the consolidation behavior and strength of the soil and because it is considered in the design of geotechnical engineering structures such as retaining walls, basements, tunnels, deep foundations and braced excavations.

<span class="mw-page-title-main">Differentiation of trigonometric functions</span> Mathematical process of finding the derivative of a trigonometric function

The differentiation of trigonometric functions is the mathematical process of finding the derivative of a trigonometric function, or its rate of change with respect to a variable. For example, the derivative of the sine function is written sin′(a) = cos(a), meaning that the rate of change of sin(x) at a particular angle x = a is given by the cosine of that angle.

In mathematics, vector spherical harmonics (VSH) are an extension of the scalar spherical harmonics for use with vector fields. The components of the VSH are complex-valued functions expressed in the spherical coordinate basis vectors.

In fluid dynamics, the Oseen equations describe the flow of a viscous and incompressible fluid at small Reynolds numbers, as formulated by Carl Wilhelm Oseen in 1910. Oseen flow is an improved description of these flows, as compared to Stokes flow, with the (partial) inclusion of convective acceleration.

<span class="mw-page-title-main">Integral of the secant function</span> Antiderivative of the secant function

In calculus, the integral of the secant function can be evaluated using a variety of methods and there are multiple ways of expressing the antiderivative, all of which can be shown to be equivalent via trigonometric identities,

In fluid dynamics, Taylor scraping flow is a type of two-dimensional corner flow occurring when one of the wall is sliding over the other with constant velocity, named after G. I. Taylor.

References

  1. Gallant, Joseph (2012). Doing Physics with Scientific Notebook: A Problem Solving Approach. John Wiley & Sons. p. 132. ISBN   978-1-119-94194-1. Extract of page 132. Note that the source's y-y0 is replaced with the article's y0