Regrowth inside ballast tanks

Last updated
Ballast water discharge from other sides of the world cause a certain type of pollution different from an emission type pollution as it introduces invasive species that can literally cause domestic species to go extinct. Ballast water en.svg
Ballast water discharge from other sides of the world cause a certain type of pollution different from an emission type pollution as it introduces invasive species that can literally cause domestic species to go extinct.

After delivering their cargo, empty commercial ships need to take up water from the port of arrival in order to maintain stability and ensure safe navigation conditions before heading back to the port of departure. This water, called ballast water, which contains aquatic organisms typical of the port of arrival, is stored in ballast tanks and is ultimately discharged at the port of departure when the ship is ready to be re-loaded. During this process, aquatic organisms capable of surviving in ballast water are released into new environments and can therefore become invasive species, causing serious economic and public health issues. [1] [2]

Contents

Following the ratification of the International Maritime Organization (IMO)’s Ballast Water Management (BWM) Convention, commercial ships will have to treat their ballast water in order to comply with maximum discharge standards established for organisms in different size categories (IMO’s D-2 Standards and US Coast Guard Standards). However, some organisms are capable of surviving or even recovering after harsh treatments, leading to regrowth in ballast water tanks before discharge. In order to minimise regrowth and hence avoid exceeding discharge limits, different criteria such as duration of the journey, ballast water tanks capacity and water flow rate at intake and discharge, among others, should be considered when choosing an appropriate type-approved ballast water treatment system (BWTS).

Ballast water treatment systems (BWTS)

As of 2012, no single ballast water treatment method, or even a combination of primary (e.g. mechanical/physical separation) and secondary (e.g. active chemical substances) methods, can remove or inactivate all organisms in ballast water. [3] [4] [5] Furthermore, some treatments are more effective in removing microorganisms such as bacteria, whereas others are better at killing larger organisms such as phytoplankton (e.g. diatoms) and zooplankton (e.g., copepods). [3] [6] [7]

There are currently over 50 IMO type-approved BWTS on the market to choose from. These include the use of technologies such as UV irradiation, ozonation, electrochlorination, hydrodynamic cavitation and ultrasound, among others, applied as stand-alone or combined treatments. [6] [8] The US Coast Guard requires BWTS as per 46 CFR 162.060, [9] [10] and began approving in 2016. [11]

Regrowth

Surviving organisms have the potential to regrow after treatment and, depending on the duration of the voyage and the prevailing conditions, this regrowth could lead to exceeding the maximum number of aquatic organisms that can be discharged according to the established standards.

Both phytoplankton and zooplankton have been shown to be capable of surviving in ballast water tanks for up to 23 days. [12] [13] There is also evidence showing that different phytoplanktonic organisms can regrow within 4 to 20 days of incubating in favourable conditions. [14] [15] [16] Bacteria that survive treatment have an even higher potential for regrowth, as they benefit from the death of other organisms in two different ways (i) nutrients essential for bacterial growth are released in the form of dissolved organic matter and, (ii) there is a decrease in the number of predators that would otherwise eat them. [17] [18] [19] Overall, bacterial regrowth has been observed after 18 hrs to 7 days of applying different treatments. [20] [19] [21]

Therefore, the scientific evidence currently available supports the idea that it is not an issue of “IF regrowth” but “WHEN regrowth”.

Considerations

Timescales are very important when considering regrowth. For instance, if ballast water is treated at intake and held in ballast tanks for over a week before discharge, then the organisms surviving the treatment could have enough time to increase in numbers and potentially exceed discharge standards before the end of the voyage.

Every BWTS has its advantages and disadvantages [8] and ship owners and ship operators should consider the benefits and limitations of different systems before making an educated choice based on their requirements. The issue of regrowth should be taken seriously and should be taken into account when choosing an appropriate BWTS. [22]

See also

Related Research Articles

<span class="mw-page-title-main">Plankton</span> Organisms that are in the water column and are incapable of swimming against a current

Plankton are the diverse collection of organisms found in water that are unable to propel themselves against a current. The individual organisms constituting plankton are called plankters. In the ocean, they provide a crucial source of food to many small and large aquatic organisms, such as bivalves, fish, and baleen whales.

<span class="mw-page-title-main">Algal bloom</span> Spread of planktonic algae in water

An algal bloom or algae bloom is a rapid increase or accumulation in the population of algae in freshwater or marine water systems. It is often recognized by the discoloration in the water from the algae's pigments. The term algae encompasses many types of aquatic photosynthetic organisms, both macroscopic multicellular organisms like seaweed and microscopic unicellular organisms like cyanobacteria. Algal bloom commonly refers to the rapid growth of microscopic unicellular algae, not macroscopic algae. An example of a macroscopic algal bloom is a kelp forest.

<span class="mw-page-title-main">Phytoplankton</span> Autotrophic members of the plankton ecosystem

Phytoplankton are the autotrophic (self-feeding) components of the plankton community and a key part of ocean and freshwater ecosystems. The name comes from the Greek words φυτόν, meaning 'plant', and πλαγκτός, meaning 'wanderer' or 'drifter'.

<span class="mw-page-title-main">Eutrophication</span> Excessive plant growth in response to excess nutrient availability

Eutrophication is the process by which an entire body of water, or parts of it, becomes progressively enriched with minerals and nutrients, particularly nitrogen and phosphorus. It has also been defined as "nutrient-induced increase in phytoplankton productivity". Water bodies with very low nutrient levels are termed oligotrophic and those with moderate nutrient levels are termed mesotrophic. Advanced eutrophication may also be referred to as dystrophic and hypertrophic conditions. Eutrophication can affect freshwater or salt water systems. In freshwater ecosystems it is almost always caused by excess phosphorus. In coastal waters on the other hand, the main contributing nutrient is more likely to be nitrogen, or nitrogen and phosphorus together. This depends on the location and other factors.

<span class="mw-page-title-main">Biological pump</span> Carbon capture process in oceans

The biological pump (or ocean carbon biological pump or marine biological carbon pump) is the ocean's biologically driven sequestration of carbon from the atmosphere and land runoff to the ocean interior and seafloor sediments. In other words, it is a biologically mediated process which results in the sequestering of carbon in the deep ocean away from the atmosphere and the land. The biological pump is the biological component of the "marine carbon pump" which contains both a physical and biological component. It is the part of the broader oceanic carbon cycle responsible for the cycling of organic matter formed mainly by phytoplankton during photosynthesis (soft-tissue pump), as well as the cycling of calcium carbonate (CaCO3) formed into shells by certain organisms such as plankton and mollusks (carbonate pump).

<span class="mw-page-title-main">MARPOL 73/78</span> International marine environmental convention

The International Convention for the Prevention of Pollution from Ships, 1973 as modified by the Protocol of 1978, or "MARPOL 73/78" is one of the most important international marine environmental conventions. It was developed by the International Maritime Organization with an objective to minimize pollution of the oceans and seas, including dumping, oil and air pollution.

Ballast is used in ships to provide moment to resist the lateral forces on the hull. Insufficiently ballasted boats tend to tip or heel excessively in high winds. Too much heel may result in the vessel capsizing. If a sailing vessel needs to voyage without cargo, then ballast of little or no value will be loaded to keep the vessel upright. Some or all of this ballast will then be discarded when cargo is loaded.

<span class="mw-page-title-main">Marine pollution</span> Pollution of oceans from substances discarded by humans

Marine pollution occurs when substances used or spread by humans, such as industrial, agricultural and residential waste, particles, noise, excess carbon dioxide or invasive organisms enter the ocean and cause harmful effects there. The majority of this waste (80%) comes from land-based activity, although marine transportation significantly contributes as well. It is a combination of chemicals and trash, most of which comes from land sources and is washed or blown into the ocean. This pollution results in damage to the environment, to the health of all organisms, and to economic structures worldwide. Since most inputs come from land, either via the rivers, sewage or the atmosphere, it means that continental shelves are more vulnerable to pollution. Air pollution is also a contributing factor by carrying off iron, carbonic acid, nitrogen, silicon, sulfur, pesticides or dust particles into the ocean. The pollution often comes from nonpoint sources such as agricultural runoff, wind-blown debris, and dust. These nonpoint sources are largely due to runoff that enters the ocean through rivers, but wind-blown debris and dust can also play a role, as these pollutants can settle into waterways and oceans. Pathways of pollution include direct discharge, land runoff, ship pollution, bilge pollution, atmospheric pollution and, potentially, deep sea mining.

<span class="mw-page-title-main">Ballast tank</span> Compartment for holding liquid ballast

A ballast tank is a compartment within a boat, ship or other floating structure that holds water, which is used as ballast to provide hydrostatic stability for a vessel, to reduce or control buoyancy, as in a submarine, to correct trim or list, to provide a more even load distribution along the hull to reduce structural hogging or sagging stresses, or to increase draft, as in a semi-submersible vessel or platform, or a SWATH, to improve seakeeping. Using water in a tank provides easier weight adjustment than the stone or iron ballast used in older vessels, and makes it easy for the crew to reduce a vessel's draft when it enters shallower water, by temporarily pumping out ballast. Airships use ballast tanks mainly to control buoyancy and correct trim.

<span class="mw-page-title-main">Lake ecosystem</span> Type of ecosystem

A lake ecosystem or lacustrine ecosystem includes biotic (living) plants, animals and micro-organisms, as well as abiotic (non-living) physical and chemical interactions. Lake ecosystems are a prime example of lentic ecosystems, which include ponds, lakes and wetlands, and much of this article applies to lentic ecosystems in general. Lentic ecosystems can be compared with lotic ecosystems, which involve flowing terrestrial waters such as rivers and streams. Together, these two ecosystems are examples of freshwater ecosystems.

An oily water separator (OWS) (marine) is a piece of equipment specific to the shipping or marine industry. It is used to separate oil and water mixtures into their separate components. This page refers exclusively to oily water separators aboard marine vessels. They are found on board ships where they are used to separate oil from oily waste water such as bilge water before the waste water is discharged into the environment. These discharges of waste water must comply with the requirements laid out in Marpol 73/78.

<span class="mw-page-title-main">Neuston</span> Organisms that live at the surface of a body of water

Neuston, also called pleuston, are organisms that live at the surface of a body of water, such as an ocean, estuary, lake, river, or pond. Neuston can live on top of the water surface or may be attached to the underside of the water surface. They may also exist in the surface microlayer that forms between the top side and the underside. Neuston have been defined as "organisms living at the air/water interface of freshwater, estuarine, and marine habitats or referring to the biota on or directly below the water’s surface layer."

<span class="mw-page-title-main">Ballast water regulation in the United States</span>

Ballast water discharge typically contains a variety of biological materials, including plants, animals, viruses, and bacteria. These materials often include non-native, nuisance, exotic species that can cause extensive ecological and economic damage to aquatic ecosystems. Ballast water discharges are believed to be the leading source of invasive species in U.S. marine waters, thus posing public health and environmental risks, as well as significant economic cost to industries such as water and power utilities, commercial and recreational fisheries, agriculture, and tourism. Studies suggest that the economic cost just from introduction of pest mollusks to U.S. aquatic ecosystems is more than $6 billion per year.

<span class="mw-page-title-main">Marine snow</span> Shower of organic detritus in the ocean

In the deep ocean, marine snow is a continuous shower of mostly organic detritus falling from the upper layers of the water column. It is a significant means of exporting energy from the light-rich photic zone to the aphotic zone below, which is referred to as the biological pump. Export production is the amount of organic matter produced in the ocean by primary production that is not recycled (remineralised) before it sinks into the aphotic zone. Because of the role of export production in the ocean's biological pump, it is typically measured in units of carbon. The term was coined by explorer William Beebe as observed from his bathysphere. As the origin of marine snow lies in activities within the productive photic zone, the prevalence of marine snow changes with seasonal fluctuations in photosynthetic activity and ocean currents. Marine snow can be an important food source for organisms living in the aphotic zone, particularly for organisms that live very deep in the water column.

<span class="mw-page-title-main">Environmental effects of shipping</span> Ocean pollution

The environmental effects of shipping include air pollution, water pollution, acoustic, and oil pollution. Ships are responsible for more than 18% of nitrogen oxides pollution, and 3% of greenhouse gas emissions.

<span class="mw-page-title-main">Ballast water discharge and the environment</span> Harmful effects of ballast water discharge

Ballast water discharges by ships can have a negative impact on the marine environment. The discharge of ballast water and sediments by ships is governed globally under the Ballast Water Management Convention, since its entry into force in September 2017. It is also controlled through national regulations, which may be separate from the Convention, such as in the United States.

Biodilution, sometimes referred to as bloom dilution, is the decrease in concentration of an element or pollutant with an increase in trophic level. This effect is primarily observed during algal blooms whereby an increase in algal biomass reduces the concentration of pollutants in organisms higher up in the food chain, like zooplankton or daphnia.

<span class="mw-page-title-main">Planktivore</span> Aquatic organism that feeds on planktonic food

A planktivore is an aquatic organism that feeds on planktonic food, including zooplankton and phytoplankton. Planktivorous organisms encompass a range of some of the planet's smallest to largest multicellular animals in both the present day and in the past billion years; basking sharks and copepods are just two examples of giant and microscopic organisms that feed upon plankton. Planktivory can be an important mechanism of top-down control that contributes to trophic cascades in aquatic and marine systems. There is a tremendous diversity of feeding strategies and behaviors that planktivores utilize to capture prey. Some planktivores utilize tides and currents to migrate between estuaries and coastal waters; other aquatic planktivores reside in lakes or reservoirs where diverse assemblages of plankton are present, or migrate vertically in the water column searching for prey. Planktivore populations can impact the abundance and community composition of planktonic species through their predation pressure, and planktivore migrations facilitate nutrient transport between benthic and pelagic habitats.

<span class="mw-page-title-main">Particulate organic matter</span>

Particulate organic matter (POM) is a fraction of total organic matter operationally defined as that which does not pass through a filter pore size that typically ranges in size from 0.053 millimeters (53 μm) to 2 millimeters.

<span class="mw-page-title-main">Ballast Water Management Convention</span>

The International Convention for the Control and Management of Ships' Ballast Water and Sediments is a 2004 international maritime treaty which requires signatory flag states to ensure that ships flagged by them comply with standards and procedures for the management and control of ships' ballast water and sediments. The Convention aims to prevent the spread of harmful aquatic organisms from one region to another and halt damage to the marine environment from ballast water discharge, by minimising the uptake and subsequent discharge of sediments and organisms. From 2024, all ships are required to have approved Ballast Water Management Treatment System, according to the D2 standard. Existing ships are required to install an approved system, which may cost up to 5 million USD per ship to install. To assist with implementation, the IMO has released 14 Guidance documents in regards to the Convention including the G2 Guidelines for Ballast Water Sampling, G4 Guidelines for Ballast Water management and G6 Guidelines for Ballast Water Exchange. As of 15 July 2021, 86 countries were contracting States to the BWM Convention.

References

  1. "Silent Invasion" (PDF). WWF International. 2009.
  2. "Control and management of ballast water". gov.uk. 2012.
  3. 1 2 Chase, C., Reilly, C., Pederson, J. (2001) Marine bioinvasions fact sheet: ballast water treatment options. MIT Sea Grant Centre for Coastal Resources, Cambridge, MA. Marine bioinvasions fact sheet.
  4. Tsolaki, Efi; Diamadopoulos, Evan (2010). "Technologies for ballast water treatment: A review". Journal of Chemical Technology & Biotechnology. 85: 19–32. doi:10.1002/jctb.2276.
  5. Veldhuis, M., ten Hallers, C., de la Rivière, E.B., Fuhr, F., Finke, J., Stehouwer, P.P., van de Star, I., van Slooten, C. (2010). “Ballast water treatment systems: “Old” and “New” ones”. In: Emerging ballast water management systems. Proceedings of the IMO-WMU Research and Development Forum, Malmö, Sweden.
  6. 1 2 Gregg, Matthew; Rigby, Rigby; Hallegraeff, Gustaaf (2009). "Review of two decades of progress in the development of management options for reducing or eradicating phytoplankton, zooplankton and bacteria in ship's ballast water" (PDF). Aquatic Invasions. 4 (3): 521–565. doi: 10.3391/ai.2009.4.3.14 .
  7. Wright, D., Dawson, R. (2002). “Shipboard Trial of Primary and Secondary Ballast Water Treatment Systems”. In: Ballast Water Treatment R&D Directory.
  8. 1 2 Ballast water treatment technologies and current system availability (2015). Part of Lloyd's Register's Understanding Ballast Water Management Series.
  9. "Title 46 → Chapter I → Subchapter Q → Part 162 → Subpart 162.060". United States Coast Guard. December 6, 2016. Retrieved December 8, 2016.
  10. "Homeport: Ballast Water Management Program". United States Coast Guard . Retrieved December 8, 2016.
  11. "Marine Safety Center issues Ballast Water Management System (BWMS) type-approval certificate to Optimarin AS". United States Coast Guard. December 2, 2016. Retrieved December 8, 2016.
  12. Kang, Jung-Hoon; Hyun, Bong-Gil; Shin, Kyoungsoon (2010). "Phytoplankton viability in ballast water from international commercial ships berthed at ports in Korea". Marine Pollution Bulletin. 60 (2): 230–237. doi:10.1016/j.marpolbul.2009.09.021. PMID   19857877.
  13. Gollasch, S. (2000). "Survival of tropical ballast water organisms during a cruise from the Indian Ocean to the North Sea". Journal of Plankton Research. 22 (5): 923–937. doi: 10.1093/plankt/22.5.923 .
  14. Stehouwer, P.P., Fuhr, F., Veldhuis, M. (2010). “A novel approach to determine ballast water vitality and viability after treatment”. In: Emerging ballast water management systems. Proceedings of the IMO-WMU Research and Development Forum, Malmö, Sweden.
  15. van der Star, I., Liebich, V., Stehouwer, P.P. (2011). “The forgotten fraction: The importance of organisms smaller than 10 µm when evaluating ballast water treatment systems”. Ballast Water Management Systems41.
  16. Martínez, Lucía F.; Mahamud, Manuel M.; Lavín, Antonio G.; Bueno, Julio L. (2013). "The regrowth of phytoplankton cultures after UV disinfection". Marine Pollution Bulletin. 67 (1–2): 152–157. doi:10.1016/j.marpolbul.2012.11.019. PMID   23200304.
  17. Carney, K.J.; Delany, J.E.; Sawant, S.; Mesbahi, E. (2011). "The effects of prolonged darkness on temperate and tropical marine phytoplankton, and their implications for ballast water risk management". Marine Pollution Bulletin. 62 (6): 1233–1244. doi:10.1016/j.marpolbul.2011.03.022. PMID   21489565.
  18. Lasternas, S.; Agustí, S. (2014). "The percentage of living bacterial cells related to organic carbon release from senescent oceanic phytoplankton" (PDF). Biogeosciences. 11 (22): 6377–6387. Bibcode:2014BGeo...11.6377L. doi: 10.5194/bg-11-6377-2014 .
  19. 1 2 Hess-Erga, Ole-Kristian; Blomvågnes-Bakke, Bente; Vadstein, Olav (2010). "Recolonization by heterotrophic bacteria after UV irradiation or ozonation of seawater; a simulation of ballast water treatment". Water Research. 44 (18): 5439–5449. doi:10.1016/j.watres.2010.06.059. PMID   20655082.
  20. Waite, T.D., Kazumi, J., Lane, P.V.Z., Farmer, L.L., Smith, S.G., Smith, S.L., Hitchcock, G., Capo, T.R. (2003). Waite, T.D., Kazumi, J., Lane, P.V.Z., Farmer, L.L., Smith, S.G., Smith, S.L., Hitchcock, G., Capo, T.R. (2003). “Removal of natural populations of marine plankton by a large-scale ballast water treatment system”. Marine Ecology Progress Series258: 51-63.
  21. First, Matthew R.; Drake, Lisa A. (2014). "Life after treatment: Detecting living microorganisms following exposure to UV light and chlorine dioxide". Journal of Applied Phycology. 26: 227–235. doi:10.1007/s10811-013-0049-9. S2CID   17627881.
  22. Grob, Carolina; Pollet, Bruno G. (2016). "Regrowth in ship's ballast water tanks: Think again!". Marine Pollution Bulletin. 109 (1): 46–48. doi:10.1016/j.marpolbul.2016.04.061. PMID   27184126.