Remote ID

Last updated

The Federal Aviation Administration (FAA) set the effective date of March 16, 2021 for Remote ID, the rule and regulation applied to operations of any unmanned aircraft (UA) required to register a unique remote identification number to the FAADroneZone registration portal for unmanned aircraft. [1] United States Congress elected the FAA with the ability to do so as the authority of aviation safety regulation and enforcement. [2] FAA's Remote ID along with all other federal agency rules and regulation are published first published in the Federal Register (FR) and then their respective chapters in Code of Federal Regulations (CFR) when the date the final rules enactment arrives. Two types of remote ID are available to UA operators that comply with Remote Identification of Unmanned Aircraft, standard remote identification and remote identification modules. [3]

Contents

Federal Register to Code of Federal Regulations

The Federal Register is where notices of rule-making and regulation propositions will be published on a daily basis, no weekend or holiday publication. This is a place of discourse when for public comments and response during specified stages of the rule making process. Dates the rules will become effective in the Code of Federal Regulation are published with the final rule on the proposal. Once codified, the changes to the CFR are effective.

Final Rule [4]

14 CFR Part 89

Unofficial remote ID compliance label Remote-ID-Compliant-01.svg
Unofficial remote ID compliance label

The Federal Aviation Administration classifies UAS under 55 pounds as small unmanned aircraft systems (sUAS). [5] Small unmanned aircraft systems can operate in one of two ways never both, either a limited recreational operation or part 107 commercial operation, so long as one of the three remote identification methods are used. Standard remote identification hardware factory manufactured pre-sale is one remote identification satisfying operation. If the operator of a sUAS that is not standard remote ID can still be compliant with a remote ID module. Remote ID modules are removable and can be added to whichever UA in the operators inventory needing it.

Subsection C - FAA-Recognized Identification Areas (FRIA)

Amendment 19 which was published as 14 CFR Part 89 Subpart C [6] September 16, 2022, outlines FAA Recognized Identification Areas (FRIA), the only airspace where limited recreational operation of unregistered sUAS can occur. Operators of sUAS were expected to comply with 14 CFR Part 89 on the day of September 16, 2023 and after. System notifications published on FAADroneZones website notifies all operators, part 107 certified and limited use recreational, that any sUAS operating outside of part 89 compliance on or after March 16, 2024 is violating enforceable code. Enforcing violation of 14 CFR Part 89 means penalties up to $25,000 can be applied and or revocation of certifications under part 61 and part 107 depending on the factors FAA will be considering when making decisions. [7]

Related Research Articles

The Federal Aviation Regulations (FARs) are rules prescribed by the Federal Aviation Administration (FAA) governing all aviation activities in the United States. The FARs comprise Title 14 of the Code of Federal Regulations. A wide variety of activities are regulated, such as aircraft design and maintenance, typical airline flights, pilot training activities, hot-air ballooning, lighter-than-air aircraft, human-made structure heights, obstruction lighting and marking, model rocket launches, commercial space operations, model aircraft operations, Unmanned Aircraft Systems (UAS) and kite flying. The rules are designed to promote safe aviation, protecting pilots, flight attendants, passengers and the general public from unnecessary risk.

<span class="mw-page-title-main">Aerial photography</span> Taking images of the ground from the air

Aerial photography is the taking of photographs from an aircraft or other airborne platforms. When taking motion pictures, it is also known as aerial videography.

<span class="mw-page-title-main">Pilot certification in the United States</span> Pilot certification

Pilot certification in the United States is typically required for an individual to act as a pilot-in-command of an aircraft. It is regulated by the Federal Aviation Administration (FAA), a branch of the U.S. Department of Transportation (USDOT). A pilot may be certified under 14 Code of Federal Regulations (CFR) Part 61 or 14 CFR Part 141. Pilots may also be certified under 14 CFR Part 107 for commercial drone operations.

Parts Manufacturer Approval (PMA) is an approval granted by the United States Federal Aviation Administration (FAA) to a manufacturer of aircraft parts.

<span class="mw-page-title-main">Airworthiness</span> Measure of an aircrafts suitability for safe flight

In aviation, airworthiness is the measure of an aircraft's suitability for safe flight. Initial airworthiness is demonstrated by a certificate of airworthiness issued by the civil aviation authority in the state in which the aircraft is registered, and continuing airworthiness is achieved by performing the required maintenance actions.

In the United States, skydiving is a self-regulated sport, which means skydivers, in the US, voluntarily follow a set of basic safety requirements established by the U.S. Parachute Association. Federal requirements can be found in the Federal Aviation Regulations. Most of the regulations concern the aircraft, pilot and rules of flight. However, 14 CFR Part 105, "Parachute Operations" regulates when and where jumps may be made and designates the requirements for parachute equipment and packing. For example, 14 CFR Part 105 requires the person packing either the main chute or the reserve parachute to be a certificated rigger, which means he or she has taken an FAA-approved training course and has passed rigorous FAA testing.

In United States aviation, a special flight rules area (SFRA) is a region in which the normal regulations of flight do not apply in whole or in part, especially regulations concerning airspace classification, altitude, course, and speed restrictions, and the like.

<span class="mw-page-title-main">First-person view (radio control)</span> Controlling a radio-controlled vehicle from the driver or pilots view point

First-person view (FPV), also known as remote-person view (RPV), or video piloting, is a method used to control a radio-controlled vehicle from the driver or pilot's viewpoint. Most commonly it is used to pilot a radio-controlled aircraft or other type of unmanned aerial vehicle (UAV) such as a military drone. The operator gets a first-person perspective from an onboard camera that feeds video to FPV goggles or a monitor. More sophisticated setups include a pan-and-tilt gimbaled camera controlled by a gyroscope sensor in the pilot's goggles and with dual onboard cameras, enabling a true stereoscopic view.

The Next Generation Air Transportation System (NextGen) is an ongoing United States Federal Aviation Administration (FAA) project to modernize the National Airspace System (NAS). The FAA began work on NextGen improvements in 2007 and plans to finish the final implementation segment by 2030. The goals of the modernization include using new technologies and procedures to increase the safety, efficiency, capacity, access, flexibility, predictability, and resilience of the NAS while reducing the environmental impact of aviation.

<span class="mw-page-title-main">Air Defense Identification Zone (North America)</span> Air defense identification zone

The Air Defense Identification Zone of North America is an air defense identification zone (ADIZ) that covers the airspace surrounding the United States and Canada – in which the ready identification, location, and control of civil aircraft over land or water is required in the interest of national security. This ADIZ is jointly administered by the civilian air traffic control authorities and the militaries of both nations, under the auspices of the North American Aerospace Defense Command (NORAD). The Federal Aviation Administration (FAA) handles the requests of international aircraft and Transport Canada handles Canadian requests. Any aircraft flying in these zones without authorization may be identified as a threat and treated as an enemy aircraft, potentially leading to interception by fighter aircraft.

<span class="mw-page-title-main">V speeds</span> Standard terms to define airspeeds

In aviation, V-speeds are standard terms used to define airspeeds important or useful to the operation of all aircraft. These speeds are derived from data obtained by aircraft designers and manufacturers during flight testing for aircraft type-certification. Using them is considered a best practice to maximize aviation safety, aircraft performance, or both.

Unmanned aircraft system simulation focuses on training pilots to control an unmanned aircraft or its payload from a control station. Flight simulation involves a device that artificially re-creates aircraft flight and the environment in which it flies for pilot training, design, or other purposes. It includes replicating the equations that govern how aircraft fly, how they react to applications of flight controls, the effects of other aircraft systems, and how the aircraft reacts to external factors such as air density, turbulence, wind shear, cloud, precipitation, etc.

The US Federal Aviation Administration has adopted the name small unmanned aircraft system (sUAS) to describe aircraft systems without a flight crew on board weighing less than 55 pounds. More common names include UAV, drone, remotely piloted vehicle (RPV), remotely piloted aircraft (RPA), and remotely operated aircraft (ROA). These unmanned aircraft flown in the USA's National Airspace System must operate under the rules of a Community Based Organization for recreational purposes or 14 CFR Part 107 for commercial operations. All UAVs weighing more than 250 grams flown for any purpose must be registered with the FAA.

<span class="mw-page-title-main">Regulation of unmanned aerial vehicles</span>

Regulation of unmanned aerial vehicles (UAVs) involves setting safety requirements, outlining regulations for the safe flying of drones, and enforcing action against errant users.

<span class="mw-page-title-main">Commercial UAS Modernization Act</span>

The Commercial UAS Modernization Act is a bill introduced in the 114th Congress by U.S. Senators Cory Booker (D-NJ) and John Hoeven (R-ND) that would create temporary guidelines for the use of unmanned aircraft systems and regulations for the commercial drone industry. Most commercial use of drones in the U.S. is currently banned by the Federal Aviation Administration (FAA).

An agricultural drone is an unmanned aerial vehicle used in agriculture operations, mostly in yield optimization and in monitoring crop growth and crop production. Agricultural drones provide information on crop growth stages, crop health, and soil variations. Multispectral sensors are used on agricultural drones to image electromagnetic radiation beyond the visible spectrum, including near-infrared and short-wave infrared.

The Drone Federalism Act of 2017 is a bill introduced in the 115th Congress by U.S. Senators Tom Cotton (R-AR), Dianne Feinstein (D-CA), Mike Lee (R-UT), and Richard Blumenthal (D-CT) on May 25, 2017. The bill would "affirm state regulatory authority regarding the operation of unmanned aerial systems (UAS), or drones."

<span class="mw-page-title-main">Unmanned aircraft system traffic management</span>

Unmanned aircraft system traffic management (UTM) is an air traffic management ecosystem under development for autonomously controlled operations of unmanned aerial systems (UAS) by the FAA, NASA, other federal partner agencies, and industry. They are collaboratively exploring concepts of operation, data exchange requirements, and a supporting framework to enable multiple UAS operations beyond visual line-of-sight at altitudes under 400 ft above ground level in airspace where FAA air traffic services are not provided.

According to the Civil Aviation Authority of Singapore (CAAS), an unmanned aircraft (UA), commonly known as a drone, is operated without a pilot on board. An unmanned aircraft system (UAS) comprises the UA and associated elements such as the remote control equipment.

<i>RaceDayQuads v. FAA</i> American federal court case regarding drones

RaceDayQuads, LLC v. FAA, also known as Brennan v. Dickson, was a 2022 United States court case heard in the DC Federal Court of Appeals in which the online store RaceDayQuads attempted to challenge the constitutionality and legality of the Federal Aviation Administration's recent remote ID ruling and decision to require that all unmanned aerial vehicles (drones) in US airspace to continuously transmit the location of both the drone and its operator during all operations. The suit, filed by RaceDayQuads owner and CEO Tyler Brennan, was intended to "save the drone industry", including drone racing by using "FPV drones".

References

  1. "FAADroneZone". faadronezone-access.faa.gov. Retrieved 2023-10-27.
  2. General Counsel, Office of the Secretary of Transportation. (2023). State and Local Regulation of Unmanned Aircraft [Fact Sheet]. U.S. Department of Transportation. Retrieved October 27, 2023
  3. "Remote Identification of Unmanned Aircraft" (PDF). Fed. Reg. 2021. pp. 4404–4406. Retrieved October 27, 2023.
  4. Remote Identification of Unmanned Aircraft, 86 Fed. Reg. 4390 (October 27, 2023)(to be codified at 14 C.F.R. pts. 1, 11, 47, 48, 89, 91 & 107).
  5. "Appendix 3 Abbreviations/Acronyms". Aeronautical Information Manual. 2021. Retrieved October 26, 2023.
  6. "Federal Register :: Remote Identification of Unmanned Aircraft". Federal Register. 2022. Retrieved October 23, 2023.
  7. lidardrones.net. "PSA: Remote ID-14 CFR Part 89 & FAADroneZone System Notification". lidardrones.net. Retrieved 2023-10-26.