Rocket mass heater

Last updated
A pebble style rocket mass heater installed at a home in Montana Rocket mass heater wooden pebble style.jpg
A pebble style rocket mass heater installed at a home in Montana

A rocket mass heater (RMH), also known as rocket stove mass heater, is a form of slow-release radiant heating system, designed to primarily heat people and secondarily to warm areas in line of sight around it. Variations of RMH can also be extended for the functions of cooking, heating water, and producing warm air for distribution. [1]

Contents

Rocket mass heaters are developed from rocket stoves, a type of wood-burning stove, and masonry heaters. A primary design of a rocket mass heater consists of an insulated combustion chamber where fuel is burned with high efficiency at high temperature, and a large thermal mass in contact with the exhaust gases, which absorbs most of the generated heat before the gases are released to the atmosphere. [2] According to anecdotes a rocket mass heater might reduce fuel consumption by 80–90% compared to "conventional" stoves. [3] [4]

In contrast to conventional wood-burning stoves and fireplaces, in a rocket mass heater, combustion is close to complete. In a rocket mass heater, by-products of combustion, such as smoke, soot, and creosote compounds, are sucked into the insulated tunnel of the unit, where some[ who? ] claim they further combust, releasing even more heat energy to drive the rocket process, unlike a normal fire, where they are blown out the chimney. [5]

History

The word rocket was adopted from the rocket stove developed by Aprovecho for cooking, described in 1982. [6] Mass refers to the mass of masonry where it stores heat. [1] Masonry heaters have been used since pre-historic times and have evolved into various designs in Europe, Russia, and China. The key principle is the incorporation of a large thermal mass built of masonry which absorbs heat from exhausting combustion products directed in a sinuous path through channels embedded in the masonry. [7]

Construction base of a rocket stove (L-tube) DIY - Timelapse. Rocketstove L tube v2 p1-3 - timelapse - alain van den hende - CC 4-0.gif
Construction base of a rocket stove (L-tube) DIY - Timelapse.
Rocket stove Type: L-Tube RocketStove Type L-Tube - Alain Van den Hende - Licence CC 4.0.gif
Rocket stove Type: L-Tube

The first prototype was built in the 1980s. Although in some sense simply a variation on a masonry heater, most rocket mass heaters are distinct in producing immediate radiant heat (from the metal "burn" barrel), in being constructed of much cheaper materials (usually a cob mass, 55 gallon steel drum, and small brick firebox), and in requiring less robust a base to be constructed on, since a rocket mass heater's weight is distributed over a larger area. [7]

Different types of rocket mass heaters

A cob-style rocket mass heater, with a heat exchange mass made with Cob Cob style rocket mass heater.jpg
A cob-style rocket mass heater, with a heat exchange mass made with Cob
A pebble style rocket mass heater, with a wooden frame which gives it a different aesthetic Pebble style rocket mass heater.jpg
A pebble style rocket mass heater, with a wooden frame which gives it a different aesthetic

There are several types of rocket mass heaters depending on how they are designed. In all designs, an internal insulated chimney called a "heat riser", produces an efficient high-temperature burn creating sufficient draft to push exhaust gases through the rest of the system. Flue gases are cooled to a relatively low temperature within the thermal store, approximately at 50 °C (122 °F). In some designs, steam within these gases condenses into liquid, releasing the associated latent heat of condensation which further increases the efficiency in the manner of a condensing (gas) boiler.

J-tube style

In the earliest and most popular form, wood is gravity-fed into a "J-shaped" combustion tube, from where the hot gases enter a well-insulated firebrick or ceramic refractory vertical secondary combustion chamber, the exhaust from which then passes along horizontal metal ducting embedded within a massive thermal store. The thermal store is large enough to retain heat for many hours and may form part of the structure of the building. They can be used with natural buildings and within permaculture designs; where they are normally self-built and are recognized by many (but not all) building codes which regulate the design and construction of heating systems within buildings. [5]

Batch-box style

More recent alternate developments have instituted a batch-fed horizontal firebox called "batch box", which feeds into the vertical heat riser or secondary combustion chamber. Compared to a conventional J-tube style RMH, a batch-box style RMH can be loaded with more wood at once so that it can run by itself for a longer period of time. The horizontal duct flow through the mass may be replaced by a heavy "bell" of larger cross section where the hot gases slow and stratify, where the cooled gases exit near the bottom as in some masonry heaters. [8] To allow proper airflow, the vertical port at the back of the box should never be blocked. Compared to j-tube style RMH, it can take more time to build a batch-box style RMH. [9]

Cob style

The heat riser of a cob style rocket mass heater is made of cob, which is a clay and sand mixture reinforced with straw. [10] Because of the relatively low thermal conductivity, a mass consisting of cob can absorb heat and retain it for a longer period. [11]

Pebble style

Invented by Paul Wheaton in 2010, a pebble-style rocket mass heater uses pebbles and rocks to facilitate its thermal mass. [12] Compared to cob style rocket mass heaters, pebble style heaters weigh less, allowing them to be moved and modified easily. The lightweight design also makes them more suitable for installing in places that have wood floor. A pebble core also provides a different aesthetic look compared to cob. [13]

Components

"J-style" combustion unit of a Rocket mass heater profile view (top) and top down view (bottom). 1: Wood feed. 2: Burn tunnel. 3: Heat riser. 5: Fire box (comprising the fuel feed, burn tunnel and heat riser). 4 and 6: Downdraft bell / barrel. 7: Manifold. Profil holzvergaserofen.pdf
"J-style" combustion unit of a Rocket mass heater profile view (top) and top down view (bottom). 1: Wood feed. 2: Burn tunnel. 3: Heat riser. 5: Fire box (comprising the fuel feed, burn tunnel and heat riser). 4 and 6: Downdraft bell / barrel. 7: Manifold.

Different types of rocket mass heaters are made with different components and different materials for specific purposes. All types of rocket mass heaters have three main components, named a wood feed, a heat riser and heat exchange mass. Depending on the design, a rocket mass heater can have different architecture within these components, and may also contain several other components designed for different purposes. [1]

Wood feed

The wood feed is the opening through which wood and air enter the system. In a J-tube design, the wood feed is a small and narrow opening that receives wood in a vertical orientation. [1] A wood feed is designed in a way that when wood sticks are inserted into the feed, only the bottom end of the sticks burn. Due to the direction of the airflow, the fire burns sideways, toward the combustion chamber and the heat riser. The horizontal direction of the fire prevents smoke from escaping the wood feed to the environment. As the bottom of the wood sticks burn, they get slowly pushed in to the feed. [14] The wood feed in a batch-box style rocket mass heater allows more wood to be loaded at the same time. [8]

Heat riser

The heat riser is an insulated, vertical channel that draws flames upward and powers the rest of the firebox. The heat riser should be insulated to help hold the flames at high temperatures for a complete combustion. [15] The low thermal conductivity of the insulation material allows temperature to build up within the heat riser to high temperatures. When the hot gases reach the enclosing barrel, it gives off a significantly higher amount of heat, which cools the hot air to a relatively lower temperature. This flow causes a strong convective current within the heat riser, which creates a forward airflow which helps wood to burn sideways in the wood feed. [14]

Barrel

The barrel which encloses the heat riser is typically of 0.2 m3 which serves as a radiation heat source for the space, and whose top can also serve as a cooking surface. To allow efficient convective currents, the barrel should be made of steel or materials with higher thermal conductivity. [7]

Heat exchange mass

The thermal mass which encloses the exhaust duct and absorbs heat from the hot combustion gases is the interface that radiates heat to the environment. It can be made of cob, rocks, sand, or pebbles. The thermal mass is often sculpted into a bench which can become an architectural feature of the home. [11]

Operation

J-tube rocket mass heater in operation. 1. Vertically inserted wood burns sideways. 2. High temperature creates strong convective currents in the heat riser. 3. Exhaust gas exits sideways. 4. Heat exchange mass absorbs, stores, and radiates away heat. 5. Final exhaust made of Carbon Dioxide and steam) Operation of a j-tube rocket mass heater.gif
J-tube rocket mass heater in operation. 1. Vertically inserted wood burns sideways. 2. High temperature creates strong convective currents in the heat riser. 3. Exhaust gas exits sideways. 4. Heat exchange mass absorbs, stores, and radiates away heat. 5. Final exhaust made of Carbon Dioxide and steam)

A rocket mass heater is powered by the heat of combustion of wood inserted into the wood feed in vertical orientation. [1] To start the combustion process, the bottom end of the bundle of wood should be set on fire. The fire can only burn sideways toward the direction of the heat riser, since the insulated tube which connects the wood feed to the heat riser is the only available path for the flow of air. [14]

When fire reaches the heat riser, the J-tube design diverts flames upwards into the highly insulated combustion chamber, which allows heat energy to accumulate and create high temperature gases. The higher temperature also allows complete combustion of wood fuel. [7] When the hot air comes in contact with the enclosing barrel, the high thermal conductivity of the barrel draws a significant amount of heat from the gas. Because the barrel has a high rate of heat loss, it quickly warms the room. [7]

The remaining exhaust gases, which mainly consists of carbon dioxide and steam, exit sideways through a serpentine duct through the heat exchange mass, giving up much of their heat in the process. [3] The heat absorbed by the heat exchange mass stores that energy and slowly radiates it away to the surrounding environment. [11] [16]

Benefits

A rocket mass heater inside a tipi at Paul Wheaton's permaculture homestead in Montana Rocket Mass Heater Inside a Tipi.jpg
A rocket mass heater inside a tipi at Paul Wheaton's permaculture homestead in Montana

Disadvantages

See also

Related Research Articles

<span class="mw-page-title-main">Liquid hydrogen</span> Liquid state of the element hydrogen

Liquid hydrogen (H2(l)) is the liquid state of the element hydrogen. Hydrogen is found naturally in the molecular H2 form.

<span class="mw-page-title-main">Thermal insulation</span> Minimization of heat transfer

Thermal insulation is the reduction of heat transfer between objects in thermal contact or in range of radiative influence. Thermal insulation can be achieved with specially engineered methods or processes, as well as with suitable object shapes and materials.

<span class="mw-page-title-main">Furnace (central heating)</span> Device used for heating buildings

A furnace, referred to as a heater or boiler in British English, is an appliance used to generate heat for all or part of a building. Furnaces are mostly used as a major component of a central heating system. Furnaces are permanently installed to provide heat to an interior space through intermediary fluid movement, which may be air, steam, or hot water. Heating appliances that use steam or hot water as the fluid are normally referred to as a residential steam boilers or residential hot water boilers. The most common fuel source for modern furnaces in North America and much of Europe is natural gas; other common fuel sources include LPG, fuel oil, wood and in rare cases coal. In some areas electrical resistance heating is used, especially where the cost of electricity is low or the primary purpose is for air conditioning. Modern high-efficiency furnaces can be up to 98% efficient and operate without a chimney, with a typical gas furnace being about 80% efficient. Waste gas and heat are mechanically ventilated through either metal flue pipes or polyvinyl chloride (PVC) pipes that can be vented through the side or roof of the structure. Fuel efficiency in a gas furnace is measured in AFUE.

<span class="mw-page-title-main">Chimney</span> Ventilation for hot gases or smoke

A chimney is an architectural ventilation structure made of masonry, clay or metal that isolates hot toxic exhaust gases or smoke produced by a boiler, stove, furnace, incinerator, or fireplace from human living areas. Chimneys are typically vertical, or as near as possible to vertical, to ensure that the gases flow smoothly, drawing air into the combustion in what is known as the stack, or chimney effect. The space inside a chimney is called the flue. Chimneys are adjacent to large industrial refineries, fossil fuel combustion facilities or part of buildings, steam locomotives and ships.

<span class="mw-page-title-main">Rocket engine</span> Non-air breathing jet engine used to propel a missile or vehicle

A rocket engine uses stored rocket propellants as the reaction mass for forming a high-speed propulsive jet of fluid, usually high-temperature gas. Rocket engines are reaction engines, producing thrust by ejecting mass rearward, in accordance with Newton's third law. Most rocket engines use the combustion of reactive chemicals to supply the necessary energy, but non-combusting forms such as cold gas thrusters and nuclear thermal rockets also exist. Vehicles propelled by rocket engines are commonly used by ballistic missiles and rockets. Rocket vehicles carry their own oxidiser, unlike most combustion engines, so rocket engines can be used in a vacuum to propel spacecraft and ballistic missiles.

<span class="mw-page-title-main">Stove</span> Device used to generate heat or to cook

A stove or range is a device that generates heat inside or on top of the device, for local heating or cooking. Stoves can be powered with many fuels, such as electricity, natural gas, gasoline, wood, and coal.

<span class="mw-page-title-main">Wood fuel</span> Wood used as fuel for combustion

Wood fuel is a fuel such as firewood, charcoal, chips, sheets, pellets, and sawdust. The particular form used depends upon factors such as source, quantity, quality and application. In many areas, wood is the most easily available form of fuel, requiring no tools in the case of picking up dead wood, or few tools, although as in any industry, specialized tools, such as skidders and hydraulic wood splitters, have been developed to mechanize production. Sawmill waste and construction industry by-products also include various forms of lumber tailings.

<span class="mw-page-title-main">Combined cycle power plant</span> Assembly of heat engines that work in tandem from the same source of heat

A combined cycle power plant is an assembly of heat engines that work in tandem from the same source of heat, converting it into mechanical energy. On land, when used to make electricity the most common type is called a combined cycle gas turbine (CCGT) plant. The same principle is also used for marine propulsion, where it is called a combined gas and steam (COGAS) plant. Combining two or more thermodynamic cycles improves overall efficiency, which reduces fuel costs.

<span class="mw-page-title-main">Flue</span> Exhaust for a fireplace, furnace etc

A flue is a duct, pipe, or opening in a chimney for conveying exhaust gases from a fireplace, furnace, water heater, boiler, or generator to the outdoors. Historically the term flue meant the chimney itself. In the United States, they are also known as vents for boilers and as breeching for water heaters and modern furnaces. They usually operate by buoyancy, also known as the stack effect, or the combustion products may be 'induced' via a blower. As combustion products contain carbon monoxide and other dangerous compounds, proper 'draft', and admission of replacement air is imperative. Building codes, and other standards, regulate their materials, design, and installation.

<span class="mw-page-title-main">Pellet stove</span> Stove that uses pellet fuel

A pellet stove is a stove that burns compressed wood or biomass pellets to create a source of heat for residential and sometimes industrial spaces. By steadily feeding fuel from a storage container (hopper) into a burn pot area, it produces a constant flame that requires little to no physical adjustments. Today's central heating systems operated with wood pellets as a renewable energy source can reach an efficiency factor of more than 90%.

<span class="mw-page-title-main">Masonry oven</span> Baking chamber made of fireproof brick, concrete, or stone

A masonry oven, colloquially known as a brick oven or stone oven, is an oven consisting of a baking chamber made of fireproof brick, concrete, stone, clay, or cob. Though traditionally wood-fired, coal-fired ovens were common in the 19th century, and modern masonry ovens are often fired with natural gas or even electricity. Modern masonry ovens are closely associated with artisan bread and pizza, but in the past they were used for any cooking task involving baking. Masonry ovens are built by masons.

<span class="mw-page-title-main">Masonry heater</span> Heating device

A masonry heater is a device for warming an interior space through radiant heating, by capturing the heat from periodic burning of fuel, and then radiating the heat at a fairly constant temperature for a long period. Masonry heaters covered in tile are called cocklestoves. The technology has existed in different forms, from back into the Neoglacial and Neolithic periods. Archaeological digs have revealed excavations of ancient inhabitants utilizing hot smoke from fires in their subterranean dwellings, to radiate into the living spaces. These early forms have evolved into modern systems.

Renewable heat is an application of renewable energy referring to the generation of heat from renewable sources; for example, feeding radiators with water warmed by focused solar radiation rather than by a fossil fuel boiler. Renewable heat technologies include renewable biofuels, solar heating, geothermal heating, heat pumps and heat exchangers. Insulation is almost always an important factor in how renewable heating is implemented.

<span class="mw-page-title-main">Wood-burning stove</span> Type of stove

A wood-burning stove is a heating or cooking appliance capable of burning wood fuel, often called solid fuel, and wood-derived biomass fuel, such as sawdust bricks. Generally the appliance consists of a solid metal closed firebox, often lined by fire brick, and one or more air controls. The first wood-burning stove was patented in Strasbourg in 1557. This was two centuries before the Industrial Revolution, so iron was still prohibitively expensive. The first wood-burning stoves were high-end consumer items and only gradually became used widely.

<span class="mw-page-title-main">Outdoor wood-fired boiler</span>

The outdoor wood boiler is a variant of the classic wood stove adapted for set-up outdoors while still transferring the heat to interior buildings.

<span class="mw-page-title-main">Rocket propellant</span> Chemical or mixture used as fuel for a rocket engine

Rocket propellant is the reaction mass of a rocket. This reaction mass is ejected at the highest achievable velocity from a rocket engine to produce thrust. The energy required can either come from the propellants themselves, as with a chemical rocket, or from an external source, as with ion engines.

<span class="mw-page-title-main">Storage water heater</span> Thermodynamic device that uses energy to raise the temperature of water

A storage water heater, or a hot water system (HWS), is a domestic water heating appliance that uses a hot water storage tank to maximize water heating capacity and provide instantaneous delivery of hot water. Conventional storage water heaters use a variety of fuels, including natural gas, propane, fuel oil, and electricity. Less conventional water heating technologies, such as heat pump water heaters and solar water heaters, can also be categorized as storage water heaters.

<span class="mw-page-title-main">Paul Wheaton</span> American permaculture author, master gardener, software engineer, and author

Paul Wheaton is an American permaculture author, master gardener, software engineer, and disciple of the natural agriculturist Sepp Holzer. He is known for writing his book, "Building a Better World in Your Backyard", founding Permies, the largest website devoted to permaculture, as well as for creating and publishing articles, videos, and podcasts on the subject of permaculture.

Ernie and Erica Wisner are a couple from Tonasket, Washington, United States, best known for their innovative rocket mass heater designs. They are often referred to as the worldwide leaders and trainers in rocket stove technology. They have made over 700 rocket stoves all over the world.

References

  1. 1 2 3 4 5 Wisner, Erica; Wisner, Ernie (2016). The Rocket Mass Heater Builder's Guide. New Society Publishers. ISBN   978-0865718234 . Retrieved 3 August 2020.
  2. Evans & Jackson, Rocket Mass Heaters, pp. 5, 20
  3. 1 2 3 Apps, Rozie (20 February 2015). "Permaculture magazine". Permaculture magazine. Retrieved 19 August 2020.
  4. 1 2 3 4 Cshimasaki (23 March 2019). "What's the Most Sustainable Way to Heat a House?". jizoku. Retrieved 19 August 2020.
  5. 1 2 Meadows, Joel; Palmer, Dan (14 November 2016). "The fundamentals of Rocket Stoves". Permaculture Principles. Retrieved 3 August 2020.
  6. Aprovecho, "Whole stoves"
  7. 1 2 3 4 5 Schumack, Mark (2016-01-25). "A computational model for a rocket mass heater". Applied Thermal Engineering. 93: 763–778. doi:10.1016/j.applthermaleng.2015.10.035. ISSN   1359-4311.
  8. 1 2 van den Berg, Peter. "Results of the 8 batch box thingy at the Innovators Gathering (rocket mass heater forum at permies)". permies.com. Retrieved 4 August 2020.
  9. van den Berg, Peter. "Batchrocket.eu - Building". batchrocket.eu. Retrieved 21 August 2020.
  10. Apps, Rozie (20 February 2015). "Permaculture magazine". Permaculture magazine. Retrieved 6 August 2020.
  11. 1 2 3 4 "8 things you need to know about rocket mass heaters". commonsensehome.com. Common Sense Home. 12 March 2015. Retrieved 6 August 2020.
  12. Wheaton, Paul. "pebble style rmh - in the fisher price house". permies.com. permies. Retrieved 6 August 2020.
  13. Wisner, Erica; Wisner, Ernie. "Rocket Mass Heaters: Build your own energy-efficient rocket mass heater stove". www.dirtcheapbuilder.com. DirtCheapBuilder. Retrieved 6 August 2020.
  14. 1 2 3 4 "rocket stove mass heater". richsoil.com. Richsoil. Retrieved 7 August 2020.
  15. Wisner, Erica; Wisner, Ernie (2016). The Rocket Mass Heater Builder's Guide. New Society Publishers. p. 8. ISBN   978-0865718234 . Retrieved 7 August 2020.
  16. 1 2 Roberts, Tobias; Writer, Rise (2 January 2019). "Rocket Mass Heater Guide: An Energy Efficient Heating Option". Rise. Retrieved 19 August 2020.