Rotary car dumper

Last updated
Rotary Railcar Dumper at 45-Degree Rotation Heyl & Patterson Rotary Railcar Dumper.jpg
Rotary Railcar Dumper at 45-Degree Rotation

A rotary car dumper or wagon tippler (UK) is a mechanism used for unloading certain railroad cars such as hopper cars, gondolas or mine cars (tipplers, UK). It holds the rail car to a section of track and then rotates the track and car together to dump out the contents. Used with gondola cars, it is making open hopper cars obsolete. Because hopper cars require sloped chutes in order to direct the contents to the bottom dump doors (hatches) for unloading, gondola cars allow cars to be lower, thus lowering their center of gravity, while carrying the same gross rail load. Cars are equipped with rotary couplers to allow dumping them while they are still coupled; a "Double Rotary" gondola or hopper has rotary couplers on both ends to allow it to be unloaded while it remains coupled to stationary cars at each end.

Contents

History

In 1893, Timothy Long filed for a patent on a rotary car dumper. [1] This dumper required the car to be uncoupled because the dumper rolled the car to the side as it dumped. In 1901, Erskine Ramsay filed for a patent on a rotary dumper where the center of rotation of the dumper was aligned with the coupling. [2] When combined with Janney couplers that were free to rotate, this permitted dumping cars without uncoupling them from the train.

The rotary mine-car dumper offered by the Ottumwa Box-Car Loader Company in 1909 could dump five relatively small mine cars per minute. Prior to this, the common method of dumping mine cars was to tip them endwise. [3]

By 1921, the Car Dumper Equipment Company was offering a wide variety of rotary dumpers, including not only standard gauge dumpers, but also dumpers for use on mine railways; some of the latter were designed to dump an entire train in one operation. [4]

Examples

Alternatives

The primary alternative to rotary dumping has long been provided by a wide variety of self-unloading cars. Most of these are bottom-dump cars of various sorts, equipped with doors of one sort or another at the bottom to allow bulk cargo to be unloaded by gravity. Drop-bottom gondolas, for example, are low-sided open-topped cars where much of the floor of the car is composed of trapdoors. [5] [6] While drop-bottom cars could usually be used for other purposes, side-dump cars and hopper cars with sloping floors to guide the cargo to unloading doors can only be used for bulk cargo. [7] [8] All of these have the advantage that they can be unloaded anywhere, but the disadvantage that any imperfection in the seals of the doors allows material to spill onto the track.

In the mining industry, the long established standard for dumping mine cars was to run them into horns at the ends of the rails at the tipple. The inertia of the car would cause it and sometimes a short segment of hinged rail to tip forward, dumping the load out the end of the car. [9] Some of these dump mechanisms completely overturned the car end-for-end, and some allowed the car to continue onward after being dumped. [10] In the 19th century, a patent was issued for a machine to tip entire railroad cars endwise for unloading. [11]

Bulk cargo such as grain shipped in boxcars poses particular problems. The Ottumwa Box Car Loader Company built boxcar unloaders that both tipped the car sideways and rocked it end for end so that the cargo would spill out the side door. [12] One of these machines was in use in Portland, Oregon in 1921. [13]

See also

Related Research Articles

<span class="mw-page-title-main">Railroad car</span> Vehicle used for carrying cargo or passengers on rail transport system

railroad car, railcar, railway wagon, railway carriage, railway truck, railwagon, railcarriage or railtruck, also called a train car, train wagon, train carriage or train truck, is a vehicle used for the carrying of cargo or passengers on a rail transport network. Such cars, when coupled together and hauled by one or more locomotives, form a train. Alternatively, some passenger cars are self-propelled in which case they may be either single railcars or make up multiple units.

<span class="mw-page-title-main">Dump truck</span> Truck which can tip its bed, dumping its contents

A dump truck, known also as a dumping truck, dump trailer, dumper trailer, dump lorry or dumper lorry or a dumper for short, is used for transporting materials for construction as well as coal. A typical dump truck is equipped with an open-box bed, which is hinged at the rear and equipped with hydraulic rams to lift the front, allowing the material in the bed to be deposited ("dumped") on the ground behind the truck at the site of delivery. In the UK, Australia, South Africa and India the term applies to off-road construction plants only and the road vehicle is known as a tip lorry, tipper lorry, tipper truck, tip truck, tip trailer or tipper trailer or simply a tipper.

<span class="mw-page-title-main">Refrigerator car</span> Railroad car designed to carry perishable freight at specific temperatures

A refrigerator car is a refrigerated boxcar (U.S.), a piece of railroad rolling stock designed to carry perishable freight at specific temperatures. Refrigerator cars differ from simple insulated boxcars and ventilated boxcars, neither of which are fitted with cooling apparatus. Reefers can be ice-cooled, come equipped with any one of a variety of mechanical refrigeration systems, or use carbon dioxide as a cooling agent. Milk cars may or may not include a cooling system, but are equipped with high-speed trucks and other modifications that allow them to travel with passenger trains.

<span class="mw-page-title-main">Hopper car</span> Railroad freight car used for transporting loose bulk commodities

A hopper car (US) or hopper wagon (UIC) is a type of railroad freight car used to transport loose bulk commodities such as coal, ore, grain, and track ballast. Two main types of hopper car exist: covered hopper cars, which are equipped with a roof, and open hopper cars, which do not have a roof.

<span class="mw-page-title-main">Bulk material handling</span>

Bulk material handling is an engineering field that is centered on the design of equipment used for the handling of dry materials. Bulk materials are those dry materials which are powdery, granular or lumpy in nature, and are stored in heaps. Examples of bulk materials are minerals, ores, coal, cereals, woodchips, sand, gravel, clay, cement, ash, salt, chemicals, grain, sugar, flour and stone in loose bulk form. It can also relate to the handling of mixed wastes. Bulk material handling is an essential part of all industries that process bulk ingredients, including: food, beverage, confectionery, pet food, animal feed, tobacco, chemical, agricultural, polymer, plastic, rubber, ceramic, electronics, metals, minerals, paint, paper, textiles and more.

<span class="mw-page-title-main">Gondola (rail)</span> Open-top railroad freight car used for carrying loose bulk materials

In North American railroad terminology, a gondola is an open-topped rail vehicle used for transporting loose bulk materials. Because of their low side walls, gondolas are also suitable for the carriage of such high-density cargos as steel plates or coils, or of bulky items such as prefabricated sections of rail track. Gondolas are distinct from hopper cars in that they do not have doors on their floor to empty cargo.

<span class="mw-page-title-main">Covered hopper</span> Railroad freight car

A covered hopper is a self-clearing, enclosed, weatherproof railroad freight car. It has a fixed roof, sides, and ends with openings for loading through the top and unloading through the bottom. Covered hopper cars are designed for carrying dry bulk loads, such as grain, sand, clay and Portland cement.

<span class="mw-page-title-main">Tipple</span> Mine structure used to load coal or ore

A tipple is a structure used at a mine to load the extracted product for transport, typically into railroad hopper cars. In the United States, tipples have been frequently associated with coal mines, but they have also been used for hard rock mining.

<span class="mw-page-title-main">Rail freight transport</span> Practice of transporting cargo by rail

Rail freight transport is the use of railways and trains to transport cargo as opposed to human passengers.

<span class="mw-page-title-main">Bulk cargo</span> Commodity cargo transported unpackaged in large quantities

Bulk cargo is commodity cargo that is transported unpackaged in large quantities.

Type H Tightlock couplers are a variety of Janney coupler, typically used on North American mainline passenger rail cars. They have mechanical features that reduce slack in normal operation and prevent telescoping in derailments, yet remain compatible with other Janney types used by North American freight railroads.

<span class="mw-page-title-main">Hopper barge</span>

A hopper barge is a type of barge commonly designed to transport commodities like coal, steel, rocks, sand, soil and waste. 'Hopper barge' can also refer to a barge that dumps cargo at sea. These are now commonly called 'split hopper barge', because they split along the length of the hull. Split hopper barges can be non-propelled or self-propelled.

<span class="mw-page-title-main">Semi-trailer</span> Trailer vehicle without a front axle

A semi-trailer is a trailer without a front axle. The combination of a semi-trailer and a tractor truck is called a semi-trailer truck.

<span class="mw-page-title-main">Minecart</span> Type of rail vehicle used with mine railways

A minecart, mine cart, or mine car is a type of rolling stock found on a mine railway, used for transporting ore and materials procured in the process of traditional mining. Minecarts are seldom used in modern operations, having largely been superseded in underground operations by more efficient belt conveyor systems that allow machines such as longwall shearers and continuous miners to operate at their full capacity, and above ground by large dumpers.

A specialized set of jargon describe the tools, equipment, and employment sectors used in the trucking industry in the United States. Some terms may be used within other English-speaking countries, or within the freight industry in general. For example, shore power is a term borrowed from shipping terminology, in which electrical power is transferred from shore to ship, instead of the ship relying upon idling its engines. Drawing power from land lines is more efficient than engine idling and eliminates localized air pollution. Another borrowed term is "landing gear", which refers to the legs which support the front end of a semi-trailer when it is not connected to a semi-truck. Some nicknames are obvious wordplay, such as "portable parking lot", in reference to a truck that carries automobiles.

Heyl & Patterson Inc. is an American specialist engineering company, founded in 1887 and based in Pittsburgh, Pennsylvania.

<span class="mw-page-title-main">Open wagon</span> Railway wagons for transportation of bulk goods

Open wagons form a large group of railway goods wagons designed primarily for the transportation of bulk goods that are not moisture-retentive and can usually be tipped, dumped or shovelled. The International Union of Railways (UIC) distinguishes between ordinary wagons and special wagons (F/6). Open wagons often form a significant part of a railway company's goods wagon fleet; for example, forming just under 40% of the Deutsche Bahn's total goods wagon stock in Germany.

<span class="mw-page-title-main">Freight house</span>

A freight house, in North America, is a building owned and operated by a railroad for receiving, loading, unloading, and temporary storage of less-than-car load (LCL) freight. Having a protected area for temporary freight storage improves efficiency by allowing railroads to accommodate customers' delivery and pickup schedules without leaving boxcars idle at loading points and destinations. A typical freight house has at least one trackside door with one or more doors for trucks or wagons to load and unload on the opposite side of the building.

<span class="mw-page-title-main">Reliance Tipple</span> United States historic place

The Reliance Tipple is the site of two coal tipples associated with coal production at Reliance, Wyoming. The first tipple was built in 1910 and used until 1936. The wood structure was built on a sandstone foundation and served Reliance Mines No. 1 through No. 6. The perishable portions of the earlier tipple have disappeared, leaving only the sandstone foundations and some artifacts buried in the tailings pile.

A Helix Dumper is a rail transport and unloading solution, designed for continuous rolling discharge of bulk commodities. Originally developed for the iron ore industry, the Helix Dumper system can handle many types of fine-grained and potentially sticky commodities. When the Helix Dumper wagon enters the unloading area, a wheel at the top of the wagon makes contact with the spiral-shaped rigid guide that constitutes the unloading station. As the wheel travels along the path of the guide, the wagon chassis remains on the rails while the body of the wagon is rotated 148 degrees to dump its load. After the rotation, the direction of the guide changes and the wagon body is returned to its normal position. The Helix Dumper has a discharge rate of up to 25,000 tonnes per hour.

References

  1. Timothy Long, Dumping apparatus for railway cars, U.S. patent 527,117 , granted Oct. 9, 1894.
  2. Erskine Ramsay, Revolvable Car Dumping Structure, U.S. patent 701,764 , granted June 3, 1902.
  3. Revolving Car Dump, Mines and Minerals, Vol. XXIX, No. 9 (April 1909); page 413.
  4. Car Dumper Equipment Company, The Mining Catalog (Metal and Quarry Ed.), Keystone, Pittsburgh, 1921; page 295.
  5. Cars, Freight: General Views, Car Builders' Cyclopedia of American Practice, Vol. 3; Figs. 21-23., see also the definition of drop-bottom on page 48.
  6. Spencer Otis, Drop Bottom Dump Car, U.S. patent 780,762 , granted Jan. 24, 1905.
  7. Car-bodies, Freight: Goldola Cars, Car Builders' Cyclopedia of American Practice, Vol. 3; Figs. 21-23., see also the definition of hopper-bottom car on page 68.
  8. Halbert Powers Gillette, Chapter X: Methods and Cost with Cars, Earthwork and Its Cost, McGraw Hill, New York, 1920; pages 335-338 discuss side-dump cars.
  9. Les Benedict, director, The Last Pony Mine, part 2, Film Production Unit, Iowa State University, Ames, 1972; at 10:37 (2:12 in part 2), the film shows a mine car being dumped.
  10. International Correspondence Schools, The Elements of Mining Engineering Vol. 3, The Colliery Engineer Co., Scranton, 1900; pages 63-69, paragraphs 2644-2653.
  11. Patrick H. Kane, Car Loading and Unloading Device, U.S. patent 305,600 , granted Sept. 23, 1884.
  12. William E. Hunt, Car Unloader, U.S. patent 1,266,474 , issued May 14, 1918.
  13. A Mechanical Box Car Loader and Unloader, Railway Review, Vol. 68, No. 16 (April 16, 1921); pages 606-607.