Ruppeiner geometry

Last updated April 29, 2024

Ruppeiner geometry is thermodynamic geometry (a type of information geometry) using the language of Riemannian geometry to study thermodynamics. George Ruppeiner proposed it in 1979. He claimed that thermodynamic systems can be represented by Riemannian geometry, and that statistical properties can be derived from the model.

This geometrical model is based on the inclusion of the theory of fluctuations into the axioms of equilibrium thermodynamics, namely, there exist equilibrium states which can be represented by points on two-dimensional surface (manifold) and the distance between these equilibrium states is related to the fluctuation between them. This concept is associated to probabilities, i.e. the less probable a fluctuation between states, the further apart they are. This can be recognized if one considers the metric tensor g_ij in the distance formula (line element) between the two equilibrium states

ds^{2}=g_{ij}^{R}dx^{i}dx^{j},\,

where the matrix of coefficients g_ij is the symmetric metric tensor which is called a Ruppeiner metric, defined as a negative Hessian of the entropy function

g_{ij}^{R}=-\partial _{i}\partial _{j}S(U,N^{a})

where U is the internal energy (mass) of the system and N^a refers to the extensive parameters of the system. Mathematically, the Ruppeiner geometry is one particular type of information geometry and it is similar to the Fisher-Rao metric used in mathematical statistics.

The Ruppeiner metric can be understood as the thermodynamic limit (large systems limit) of the more general Fisher information metric.^[1] For small systems (systems where fluctuations are large), the Ruppeiner metric may not exist, as second derivatives of the entropy are not guaranteed to be non-negative.

The Ruppeiner metric is conformally related to the Weinhold metric via

ds_{R}^{2}={\frac {1}{T}}ds_{W}^{2}\,

where T is the temperature of the system under consideration. Proof of the conformal relation can be easily done when one writes down the first law of thermodynamics (dU=TdS+...) in differential form with a few manipulations. The Weinhold geometry is also considered as a thermodynamic geometry. It is defined as a Hessian of the internal energy with respect to entropy and other extensive parameters.

g_{ij}^{W}=\partial _{i}\partial _{j}U(S,N^{a})

It has long been observed that the Ruppeiner metric is flat for systems with noninteracting underlying statistical mechanics such as the ideal gas. Curvature singularities signal critical behaviors. In addition, it has been applied to a number of statistical systems including Van der Waals gas. Recently the anyon gas has been studied using this approach.

Application to black hole systems

This geometry has been applied to black hole thermodynamics, with some physically relevant results. The most physically significant case is for the Kerr black hole in higher dimensions, where the curvature singularity signals thermodynamic instability, as found earlier by conventional methods.

The entropy of a black hole is given by the well-known Bekenstein–Hawking formula

S={\frac {k_{B}c^{3}A}{4G\hbar }}

where $k_{B}$ is Boltzmann's constant, $c$ the speed of light, $G$ Newton's constant and $A$ is the area of the event horizon of the black hole. Calculating the Ruppeiner geometry of the black hole's entropy is, in principle, straightforward, but it is important that the entropy should be written in terms of extensive parameters,

S=S(M,N^{a})

where $M$ is ADM mass of the black hole and $N^{a}$ are the conserved charges and $a$ runs from 1 to n. The signature of the metric reflects the sign of the hole's specific heat. For a Reissner-Nordström black hole, the Ruppeiner metric has a Lorentzian signature which corresponds to the negative heat capacity it possess, while for the BTZ black hole, we have a Euclidean signature. This calculation cannot be done for the Schwarzschild black hole, because its entropy is

S=S(M)

which renders the metric degenerate.

Related Research Articles

Entropy is a scientific concept that is most commonly associated with a state of disorder, randomness, or uncertainty. The term and the concept are used in diverse fields, from classical thermodynamics, where it was first recognized, to the microscopic description of nature in statistical physics, and to the principles of information theory. It has found far-ranging applications in chemistry and physics, in biological systems and their relation to life, in cosmology, economics, sociology, weather science, climate change, and information systems including the transmission of information in telecommunication.

The second law of thermodynamics is a physical law based on universal empirical observation concerning heat and energy interconversions. A simple statement of the law is that heat always flows spontaneously from hotter to colder regions of matter. Another statement is: "Not all heat can be converted into work in a cyclic process."

In differential geometry, a Riemannian manifold or Riemannian space(M, g), so called after the German mathematician Bernhard Riemann, is a real, smooth manifold M equipped with a positive-definite inner product g_p on the tangent space T_pM at each point p.

In thermodynamics, the Gibbs free energy is a thermodynamic potential that can be used to calculate the maximum amount of work, other than pressure-volume work, that may be performed by a thermodynamically closed system at constant temperature and pressure. It also provides a necessary condition for processes such as chemical reactions that may occur under these conditions. The Gibbs free energy is expressed as

A thermodynamic potential is a scalar quantity used to represent the thermodynamic state of a system. Just as in mechanics, where potential energy is defined as capacity to do work, similarly different potentials have different meanings. The concept of thermodynamic potentials was introduced by Pierre Duhem in 1886. Josiah Willard Gibbs in his papers used the term fundamental functions.

In thermodynamics, the Helmholtz free energy is a thermodynamic potential that measures the useful work obtainable from a closed thermodynamic system at a constant temperature (isothermal). The change in the Helmholtz energy during a process is equal to the maximum amount of work that the system can perform in a thermodynamic process in which temperature is held constant. At constant temperature, the Helmholtz free energy is minimized at equilibrium.

In differential geometry, the Ricci curvature tensor, named after Gregorio Ricci-Curbastro, is a geometric object which is determined by a choice of Riemannian or pseudo-Riemannian metric on a manifold. It can be considered, broadly, as a measure of the degree to which the geometry of a given metric tensor differs locally from that of ordinary Euclidean space or pseudo-Euclidean space.

In physics, black hole thermodynamics is the area of study that seeks to reconcile the laws of thermodynamics with the existence of black hole event horizons. As the study of the statistical mechanics of black-body radiation led to the development of the theory of quantum mechanics, the effort to understand the statistical mechanics of black holes has had a deep impact upon the understanding of quantum gravity, leading to the formulation of the holographic principle.

The internal energy of a thermodynamic system is the energy contained within it, measured as the quantity of energy necessary to bring the system from its standard internal state to its present internal state of interest, accounting for the gains and losses of energy due to changes in its internal state, including such quantities as magnetization. It excludes the kinetic energy of motion of the system as a whole and the potential energy of position of the system as a whole, with respect to its surroundings and external force fields. It includes the thermal energy, i.e., the constituent particles' kinetic energies of motion relative to the motion of the system as a whole. The internal energy of an isolated system cannot change, as expressed in the law of conservation of energy, a foundation of the first law of thermodynamics.

A thermodynamic system is a body of matter and/or radiation separate from its surroundings that can be studied using the laws of thermodynamics.

In thermodynamics, the Onsager reciprocal relations express the equality of certain ratios between flows and forces in thermodynamic systems out of equilibrium, but where a notion of local equilibrium exists.

Non-equilibrium thermodynamics is a branch of thermodynamics that deals with physical systems that are not in thermodynamic equilibrium but can be described in terms of macroscopic quantities that represent an extrapolation of the variables used to specify the system in thermodynamic equilibrium. Non-equilibrium thermodynamics is concerned with transport processes and with the rates of chemical reactions.

In information geometry, the Fisher information metric is a particular Riemannian metric which can be defined on a smooth statistical manifold, i.e., a smooth manifold whose points are probability measures defined on a common probability space. It can be used to calculate the informational difference between measurements.

Thermodynamics is expressed by a mathematical framework of thermodynamic equations which relate various thermodynamic quantities and physical properties measured in a laboratory or production process. Thermodynamics is based on a fundamental set of postulates, that became the laws of thermodynamics.

Equilibrium Thermodynamics is the systematic study of transformations of matter and energy in systems in terms of a concept called thermodynamic equilibrium. The word equilibrium implies a state of balance. Equilibrium thermodynamics, in origins, derives from analysis of the Carnot cycle. Here, typically a system, as cylinder of gas, initially in its own state of internal thermodynamic equilibrium, is set out of balance via heat input from a combustion reaction. Then, through a series of steps, as the system settles into its final equilibrium state, work is extracted.

In thermodynamics, the internal energy of a system is expressed in terms of pairs of conjugate variables such as temperature and entropy, pressure and volume, or chemical potential and particle number. In fact, all thermodynamic potentials are expressed in terms of conjugate pairs. The product of two quantities that are conjugate has units of energy or sometimes power.

In differential geometry, normal coordinates at a point p in a differentiable manifold equipped with a symmetric affine connection are a local coordinate system in a neighborhood of p obtained by applying the exponential map to the tangent space at p. In a normal coordinate system, the Christoffel symbols of the connection vanish at the point p, thus often simplifying local calculations. In normal coordinates associated to the Levi-Civita connection of a Riemannian manifold, one can additionally arrange that the metric tensor is the Kronecker delta at the point p, and that the first partial derivatives of the metric at p vanish.

The partition function or configuration integral, as used in probability theory, information theory and dynamical systems, is a generalization of the definition of a partition function in statistical mechanics. It is a special case of a normalizing constant in probability theory, for the Boltzmann distribution. The partition function occurs in many problems of probability theory because, in situations where there is a natural symmetry, its associated probability measure, the Gibbs measure, has the Markov property. This means that the partition function occurs not only in physical systems with translation symmetry, but also in such varied settings as neural networks, and applications such as genomics, corpus linguistics and artificial intelligence, which employ Markov networks, and Markov logic networks. The Gibbs measure is also the unique measure that has the property of maximizing the entropy for a fixed expectation value of the energy; this underlies the appearance of the partition function in maximum entropy methods and the algorithms derived therefrom.

In physics, geometrothermodynamics (GTD) is a formalism developed in 2007 by Hernando Quevedo to describe the properties of thermodynamic systems in terms of concepts of differential geometry.

Quantum thermodynamics is the study of the relations between two independent physical theories: thermodynamics and quantum mechanics. The two independent theories address the physical phenomena of light and matter. In 1905, Albert Einstein argued that the requirement of consistency between thermodynamics and electromagnetism leads to the conclusion that light is quantized, obtaining the relation $. This paper is the dawn of quantum theory. In a few decades quantum theory became established with an independent set of rules. Currently quantum thermodynamics addresses the emergence of thermodynamic laws from quantum mechanics. It differs from quantum statistical mechanics in the emphasis on dynamical processes out of equilibrium. In addition, there is a quest for the theory to be relevant for a single individual quantum system.$

References

↑ Crooks, Gavin E. (2007). "Measuring Thermodynamic Length". Phys. Rev. Lett. 99: 100602. arXiv: 0706.0559 . Bibcode:2007PhRvL..99j0602C. doi:10.1103/PhysRevLett.99.100602.

Ruppeiner, George (1995). "Riemannian geometry in thermodynamic fluctuation theory". Reviews of Modern Physics. 67 (3): 605–659. Bibcode:1995RvMP...67..605R. doi:10.1103/RevModPhys.67.605..
Åman, John E.; Bengtsson, Ingemar; Pidokrajt, Narit; Ward, John (2008). "Thermodynamic Geometries of Black Holes". The Eleventh Marcel Grossmann Meeting. pp. 1511–1513. doi:10.1142/9789812834300_0182.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] Crooks, Gavin E. (2007). "Measuring Thermodynamic Length". Phys. Rev. Lett. 99: 100602. arXiv: 0706.0559 . Bibcode:2007PhRvL..99j0602C. doi:10.1103/PhysRevLett.99.100602.

[1]