Saab H engine

Last updated
Saab H engine
1986 Saab B202 (na) engine, right side.jpg
Naturally aspirated B202 16 valve engine in a 1986 Saab 900
Overview
Manufacturer Saab Automobile (1981-2009)
Also called
  • Ecopower
  • Family III engine
Production19812010
Layout
Configuration Inline-4
Displacement
  • 1,799 cc (109.8 cu in)
  • 1,985 cc (121.1 cu in)
  • 2,119 cc (129.3 cu in)
  • 2,290 cc (140 cu in)
Cylinder bore
  • 85.7 mm (3.37 in)
  • 90 mm (3.54 in)
  • 93 mm (3.66 in)
Piston stroke
  • 78 mm (3.07 in)
  • 90 mm (3.54 in)
Block material Cast iron
Head material Aluminum
Valvetrain
Compression ratio
  • 8.8:1
  • 9.2:1
  • 9.25:1
  • 10.0:1
  • 10.1:1
  • 10.5:1
Combustion
Turbocharger
  • Garrett T25
  • Garrett GT1752S
  • MHI TD04HL-15G-6 (in some versions)
Fuel system Carburetor, Fuel injection
Management
Fuel type Gasoline
Oil system Wet sump
Cooling system Water-cooled
Output
Power output 92–310 hp (69–231 kW; 93–314 PS)
Torque output 177–440 N⋅m (131–325 lb⋅ft)
Emissions
Emissions target standard Euro 6 (BAIC)
Emissions control technology Catalytic converter, EGR
Chronology
Predecessor Saab B engine
Successor GM Ecotec engine

The Saab H engine is a redesign of the Saab B engine, which in turn was based on the Triumph Slant-4 engine.

Contents

Despite the name it is not an H engine or horizontally opposed engine, but a slanted inline-4. The H engine was introduced in 1981 in the Saab 900 and was also used in the Saab 99 from 1982 onwards. H stood for high compression; higher compression was part of the update from B to H engine. It continued in use in the 900/9-3, 9000, and 9-5. The 2003 GM Epsilon-based 9-3 switched to the GM Ecotec engine, leaving the 9-5 as the sole user of the H engine. The H family of engine was used in the first-generation 9-5 until it was discontinued in 2010. The tooling and know-how was sold to BAIC. The latter B2X4 and B2X5 engines have in practice nothing in common with the early B engines except cylinder spacing.

All versions feature a grey cast iron block and an aluminum head with a single or double overhead chain driven camshafts. SOHC engines use two valves per cylinder and DOHC versions use four valves per cylinder with a pentroof chamber, the valve angle being 22 degrees from vertical. All engines use flat inverted bucket type valve lifters, hydraulic in the case of DOHC engines.

The engines were given numbers, for instance B201 is a 2.0-litre (20) engine with one camshaft.

B201

Saab H engine (B201) in a 1987 Saab 90 SaabHengine.jpg
Saab H engine (B201) in a 1987 Saab 90

B201 is the original H engine with two valves per cylinder and a single overhead camshaft. It was introduced in 1981 and unlike the B engine it did not have the central shaft which used to power the distributor, oil- and coolant pump. Instead the distributor is located at the front of the cylinder head and directly driven by the camshaft, while the integrated waterpump was replaced with a separate unit to the rear of the engine.

It was available with 100 PS (74 kW; 99 hp) at 5200 rpm using a single carburettor, 108 PS (79 kW; 107 hp) at 5200 rpm using a dual carburettor, 118 PS (87 kW; 116 hp) at 5500 rpm using Bosch K-Jetronic fuel injection and a turbocharged, fuel injected version with 145 PS (107 kW; 143 hp) at 5000 rpm. In 1986 an intercooled version of the turbo engine also became available, it produces 155 PS (114 kW; 153 hp) at 5500 rpm.

Valmet Automotive in Uusikaupunki also planned a downsized 1.6 liter version of B201, to better suit Finnish vehicle tax laws. Downsizing was made by using a narrower cylinder bore. The prototype engine produced 92 PS (68 kW; 91 hp) at 5400 rpm, fitted with Bosch K-Jetronic fuel injection. One such prototype engine is displayed in the Uusikaupunki Saab museum.

B202 and B212

Saab B202 turbo 16-valve engine in a 1993 Saab 900T 1993 Saab 900T Convertible B202 engine.jpg
Saab B202 turbo 16-valve engine in a 1993 Saab 900T

In 1984, Saab added a 16 valve cylinder head with double overhead camshafts. They retroactively renamed the 8-valve version the B201 and used B202 as the name of the new multi-valve unit. Another notable addition to the B202 was hydraulic valve lifters and Ecopower ("ep" in Italy, "(900)S" elsewhere), with a pre-heated catalytic converter for reduced emissions.

1991 Saab B212 engine. It is longitudinally mounted in a SAAB 900. 91-900-2,1.jpg
1991 Saab B212 engine. It is longitudinally mounted in a SAAB 900.

In 1991, Saab introduced a 140 bhp (104 kW) 2.1-litre naturally aspirated 16 valve version of this engine, with an increased displacement of (2.1 L; 129.3 cu in (2,119 cc)) and a resulting name of B212. The inlet manifold was enlarged and redesigned for better and greater flow. The intake manifold and the head from the 2.1-litre constitute a well-known replacement for 1985-1993 16 valve, 2.0-litre turbocharged Saabs. Power increase is modest at stock boost but becomes much more evident at higher boost levels.

Engine builder John Nicholson also developed a Formula Three engine from the B202, for use in a Reynard 853 chassis. [1] This version one of the first to use Saab's direct ignition system (SDI) and produced 165 PS (121 kW) at 5600 rpm. Its other strength was high power in an unusually broad powerband for a naturally aspirated racing engine. [1]

B204 and B234

Saab B204L engine in a 1995 Saab 900 (NG) SE convertible. Note the red Saab Direct Ignition module, which was common to B204 and B234 engines with Trionic 5 engine management system. Only naturally aspirated NG900 and OG9-3 versions had Motronic engine management system with distributor ignition. SaabB204engine.jpg
Saab B204L engine in a 1995 Saab 900 (NG) SE convertible. Note the red Saab Direct Ignition module, which was common to B204 and B234 engines with Trionic 5 engine management system. Only naturally aspirated NG900 and OG9-3 versions had Motronic engine management system with distributor ignition.

A major redesign of the H engine came in 1990 in the form of the new B234 for the Saab 9000. The B234 featured an increase in stroke from 78 mm (3.07 in) to 90 mm (3.54 in), increasing the displacement to 2.3 liters. With this increased stroke also came a new engine block with increased deck height to make sufficient room for the increased stroke length without being forced to use shorter connecting rods, and in-block counter-rotating balance shafts for reduced vibration (NVH). There are two generations of B234 engine, one made from 1990-1993, the other from 1994 to 1998. The later motors had a revised oil sump system, head, timing cover, and different bell housing pattern. Unlike the previous B202, the block was no longer angled, but straight, something that made it unsuitable for the 900 model with its gearbox under the engine, built into the engine oil sump. The longer stroke B234 was last produced in 1998, that being the last year for the 9000 model. The B234 was selected as one of Ward's 10 Best Engines for 1995 and 1996.

The B202 was still being produced in 1993, but for the new generation Saab 900 being released in 1994 a new 2.0L engine was required. This new engine, the B204, was based on the 9000's B234, but in order to make the engine fit in the 900 the engine had to be shortened. This meant that a new chain drive for the camshafts was required to reduce the length of the engine. The B204 engine was available with natural aspiration in 900, 9000 and 9-3 in the form of 2.0i (B204i), with a low pressure turbo in the form of 9000 and 9-3 2.0t (B204E) or Saab 900 and 9-3 2.0T (B204L). B204R was briefly available in the 1999 9-3 Aero (U.S. market 'SE') model. B204 was in production in the Saab 9-3 until 2000, when it was replaced by B205.

With the introduction of the OBDII compliant B204 (also coincidental with the introduction of Trionic T5.5) Saab embarked on a new concept they termed as "Ecopower" where engines were designed for high power output while also delivering exceptional economy and low environmental impact. [2]

Turbocharged engines used Garrett T25 turbochargers and the B234R (9000 Aero manual) used a Mitsubishi Heavy Industries TD04HL-15G-6 in model year -93 and TD04HL-15T-6 later on.

The B204 and B234 are regarded by engine tuners as the preferable engine for performance tuning over the later B205 and B235 engines as the internals are of a higher strength. The later models had lightened internal components to improve efficiency and fuel economy but limit the total power output when the engine's software is revised to increase the boost pressures and specific power output. The B204 engine became a very popular engine swap for Vauxhall and Opel Astra, Calibra, Cavalier and Vectras with the GM T-body platform, in Scandinavia in the mid 2000s—the engine uses the same mounting positions due to sharing the same platform. In the UK it is swapped into rotary equipped Mazda RX8, in Ukraine and Russia it is a swap option for Daewoo (now Chevrolet) models of similar age.

Specifications
EnginePowerTorque CR. Bore × StrokeRod LengthBoost pressure
B204i130 hp (97 kW) @ 5500 rpm177 N⋅m (131 lb⋅ft) @ 4300 rpm10.1:190 mm × 78 mm
(3.54 in × 3.07 in)
153 mm (6.0 in)
B204E154 hp (115 kW) @ 5500 rpm219 N⋅m (162 lb⋅ft) @ 3600 rpm9.2:10.4 bar (5.8 psi)
B204L185 hp (138 kW) @ 5500 rpm263 N⋅m (194 lb⋅ft) @ 2100 rpm0.73 bar (10.6 psi)
B204R205 hp (153 kW) @ 5500 rpm280 N⋅m (207 lb⋅ft) @ 2200 rpm1 bar (15 psi)
B234i (19901993)150 hp (112 kW) @ 5500 rpm212 N⋅m (156 lb⋅ft) @ 3800 rpm10.1:190 mm × 90 mm
(3.54 in × 3.54 in)
147 mm (5.8 in)
B234i (1994)150 hp (112 kW) @ 5600 rpm210 N⋅m (155 lb⋅ft) @ 4300 rpm10.5:1153 mm (6.0 in)
B234E170 hp (127 kW) @ 5700 rpm260 N⋅m (192 lb⋅ft) @ 2100 rpm9.25:1147 mm (5.8 in)0.55 bar (8.0 psi)
B234L (19901993)194 hp (145 kW) @ 5500 rpm329 N⋅m (243 lb⋅ft) @ 1900 rpm (5MT)8.5:10.8 bar (12 psi)
B234L (19941998)200 hp (149 kW) @ 5500 rpm323 N⋅m (238 lb⋅ft) @ 1800 rpm (5MT)9.25:1
B234R225 hp (168 kW) @ 5500 rpm342 N⋅m (252 lb⋅ft) @ 1950 rpm1.08 bar (15.7 psi)

Note: The primary difference between the B204L and the B204R is with the intercooler, the turbo, the wastegate 'base boost' setting.

B206

The B206 is a version of the B204 but without the dual balance shafts. It was only offered as a naturally aspirated engine B206I producing 133 hp (99 kW), seemingly a Europe-only option in 1994 non-turbo 900 NGs. This engine is popular among Saab tuners in Sweden (e.g. Trollspeed) due to the lack of balance shafts but with presumably equal strength as the turbo blocks with balance shafts.

B205 and B235

The B205 and B235 engines are an evolution of the B204 and B234 engines. They were introduced in the 1998 Saab 9-5 giving reduced fuel consumption and emissions with improved refinement. The changes included lightweight internal components:lighter valves, softer valve springs, lighter pistons, and lower-drag oil pump. Another development was the introduction of the Trionic 7 torque demand type engine management system. Trionic 7 equipped engines have the black direct ignition casing on top of the engine rather than the red of the Trionic 5.

BAIC

BAIC offers the Saab H engine in various configurations on several of its models. The B205RGA and B235RGA, 2.0 and 2.3 litre turbo engines are available similar to those used in Saabs. Further BAIC offers a smaller 1.8 litre displacement version named B185RGA. This version was developed to meet requirement for government vehicle with maximum displacement of 1.8 litres. BAIC continued the development of the Saab H engine. In 2015, a B236R prototype was unveiled at the Shanghai Autoshow. This engine design incorporates variable valve timing and an EGR system which allows the engine to comply with Euro 6 emission standards. [3]

The BAIC BJ40L is available with a 201 hp (150 kW) engine named B201R and a 231 hp (172 kW) engine named B231R. [4] A 177 hp (132 kW) engine named B205EFA is offered in the Senova X65. [5] The BAIC BJ80 is also available with the 231 hp (172 kW) B231R engine variant. The B201R and B231R models do not use Saab's Trionic engine management system and direct ignition cassette.

BAIC H engine models
EngineDisplacementPowerTorque CR. Bore × Stroke
B185RGA [6] 1,799 cc (109.8 cu in)177 hp (132 kW) @ 5500 rpm240 N⋅m (177 lb⋅ft) @ 18004800 rpm9.2:185.7 mm × 78 mm
(3.37 in × 3.07 in)
B201R1,992 cc (121.6 cu in)201 hp (150 kW) @ 5500 rpm270 N⋅m (199 lb⋅ft) @ 19004500 rpm8.8:190 mm × 78 mm
(3.54 in × 3.07 in)
B205EFA177 hp (132 kW) @ 5500 rpm240 N⋅m (177 lb⋅ft) @ 18004800 rpm9.0:1
B205RGA204 hp (152 kW) @ 5500 rpm290 N⋅m (214 lb⋅ft) @ 1800 rpm8.8:1
B231R2,290 cc (140 cu in)231 hp (172 kW) @ 5500 rpm350 N⋅m (258 lb⋅ft) @ 19004300 rpm9.1:190 mm × 90 mm
(3.54 in × 3.54 in)
B235RGA250 hp (186 kW) @ 5300 rpm350 N⋅m (258 lb⋅ft) @ 1900 rpm9.3:1
B236R [7] 250 hp (186 kW) @ 5300 rpm350 N⋅m (258 lb⋅ft) @ 1900 rpm9.3:1

Successor to the Saab H-Engine

The H-engine ended production with the 1st Generation Saab 9-5 in 2009 when the intellectual property was transferred to BAIC. Starting in 2003 with the 9-3 Sport Sedan, Saab began utilizing the L850 engine Ecotec. Beginning in 2010 with the 2nd generation 9-5, all Saabs utilized the Ecotec. There were some technologies carried over into the Ecotec line from the Saab H-engine, but for the most part there is very little similarity between the two engine families. Saab continued to use its Trionic engine management system with the Ecotec.

See also

Related Research Articles

<span class="mw-page-title-main">Cosworth</span> British automotive engineering company

Cosworth is a British automotive engineering company founded in London in 1958, specialising in high-performance internal combustion engines, powertrain, and electronics for automobile racing (motorsport) and mainstream automotive industries. Cosworth is based in Northampton, England, with facilities in Cottenham, England, Silverstone, England, and Indianapolis, IN, US.

<span class="mw-page-title-main">Saab 900</span> Car model

The Saab 900 is a mid-sized automobile which was produced by Saab from 1978 until 1998 in two generations; the first from 1978 to 1993, and the second from 1994 to 1998.

<span class="mw-page-title-main">Saab 9-3</span> Swedish compact executive car

The Saab 9-3 is a compact executive car initially developed and manufactured by the Swedish automaker Saab.

<span class="mw-page-title-main">Saab 9000</span> Motor vehicle

The Saab 9000 is an automobile produced by the Swedish company Saab from 1984 to 1998. Representing the company's foray into the executive car scene, it was developed as a result of the successes of the turbocharged 99 and 900 models. The 9000 remained in production until May 1998 and it was replaced by the Saab 9-5 in late 1997, although some final cars were produced into 1998. The Saab 9000 was only available with petrol engines, as 5-door hatchback or 4-door notchback and never as a convertible or a Coupé.

<span class="mw-page-title-main">Opel Vectra</span> Compact executive car manufactured by Opel

The Opel Vectra is a mid-size car that was engineered and produced by the German automaker Opel from 1988 until 2010. Available in saloon, hatchback and estate body styles, the Vectra was also sold by the Vauxhall marque in the United Kingdom as the Vauxhall Cavalier from 1988 to 1995 and then as the Vauxhall Vectra from 1995 to 2008, and it was also sold by Holden in Australia as the Holden Vectra, by Chevrolet in Latin America as the Chevrolet Vectra.

The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.4 and 2.5 litres. While these engines were based on the GM Family II engine, the architecture was substantially re-engineered for the new Ecotec application produced since 2000. This engine family replaced the GM Family II engine, the GM 122 engine, the Saab H engine, and the Quad 4 engine. It is manufactured in multiple locations, to include Spring Hill Manufacturing, in Spring Hill, Tennessee while the engine block and cylinder heads are cast at Saginaw Metal Casting Operations in Saginaw, Michigan.

<span class="mw-page-title-main">Nissan RB engine</span> Motor vehicle engine

The RB engine is an oversquare 2.0–3.0 L straight-6 four-stroke gasoline engine from Nissan, originally produced from 1985 to 2004. The RB followed the 1983 VG-series V6 engines to offer a full, modern range in both straight or V layouts.

<span class="mw-page-title-main">General Motors 54° V6 engine</span> Motor vehicle engine

General Motors' Opel subsidiary in Europe designed a compact V6 engine with an unusual 54° vee angle. It was an iron block/aluminum head DOHC design with 4 valves per cylinder. All 54° engines were assembled at Ellesmere Port in England.

<span class="mw-page-title-main">Multi-valve</span> Type of car engine

In automotive engineering a multi-valve or multivalve engine is one where each cylinder has more than two valves. A multi-valve engine has better breathing and may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, delivering more power.

<span class="mw-page-title-main">Mitsubishi 6G7 engine</span> Motor vehicle engine

The 6G7 series or Cyclone V6 engine is a series of V6 piston engines from Mitsubishi Motors. Five displacement variants were produced from 1986 to 2021, with both SOHC and DOHC, naturally aspirated and turbo charged layouts. While MIVEC variable valve timing has also been implemented in some versions the 2.5, 3.0 and 3.5 L versions were also available with gasoline direct injection. This engine has been the flagship powerplant of the company except when they briefly built a V8 in 1999–2001. The staple of their high-end sedans, it was given twin-turbos for the Mitsubishi GTO, and became the most powerful car ever built by the company at the time.

<span class="mw-page-title-main">Toyota JZ engine</span> Motor vehicle engine

The Toyota JZ engine family is a series of inline-6 automobile engines produced by Toyota Motor Corporation. As a replacement for the M-series inline-6 engines, the JZ engines were 24-valve DOHC engines in 2.5- and 3.0-litre versions.

<span class="mw-page-title-main">Mercedes-Benz M104 engine</span> Motor vehicle engine

The Mercedes-Benz M104 is a straight-6 automobile engine produced from 1989 through 1999. It has a double overhead cam design with 4 valves per cylinder, and used a crossflow cylinder head. It replaced the M103 and was replaced by the M112 V6 starting in 1997. The bore spacing on all M104 engines is the same as M103 engines.

Multijet is Fiat Chrysler Automobiles' term for its current common rail direct injection turbodiesel engine range. Most of the Fiat, Alfa Romeo, Lancia range as well as certain Chrysler, RAM Trucks, Jeep and Maserati vehicles are equipped with Multijet engines. Ownership of some Fiat Multijet designs is shared with General Motors as part of a settlement of the failed merger between the two auto conglomerates. GM Powertrain Torino group in Turin, Italy manages their interest in these engines. Some PSA Peugeot Citroën diesel engines are also rebadged JTD units, and vice versa. Fiat's common rail diesel engine is also known as JTD, an initialism of Jet Turbo Diesel.

<span class="mw-page-title-main">Volvo Redblock Engine</span> Motor vehicle engine

The Volvo B21 is a slanted straight-four engine first used in the Volvo 200 series, meant to replace the B20. The B21 and all derived engines are often referred to as red block engines for the red paint applied to the block. The primary differences when compared to the B20 was the switch to a SOHC in place of the older pushrod configuration, and an aluminum crossflow cylinder head versus the iron head of the B20.

<span class="mw-page-title-main">Prince engine</span> Motor vehicle engine

Prince is the codename for a family of straight-four 16-valve all-aluminium gasoline engines with variable valve lift and variable valve timing developed by PSA Peugeot Citroën and BMW. It is a compact engine family of 1.4–1.6 L in displacement and includes most modern features such as gasoline direct injection and turbocharger.

<span class="mw-page-title-main">Subaru EJ engine</span> Motor vehicle engine

The Subaru EJ engine is a series of four-stroke automotive engines manufactured by Subaru. They were introduced in 1989, intended to succeed the previous Subaru EA engine. The EJ series was the mainstay of Subaru's engine line, with all engines of this series being 16-valve horizontal flat-fours, with configurations available for single, or double-overhead camshaft arrangements. Naturally aspirated and turbocharged versions are available, ranging from 96 to 320 hp. These engines are commonly used in light aircraft, kit cars and engine swaps into air-cooled Volkswagens, and are also popular as a swap into copy wasserboxer engined Volkswagen T3/Vanagon. Primary engineering on the EJ series was done by Masayuki Kodama, Takemasa Yamada and Shuji Sawafuji of Fuji Heavy Industries, Subaru's parent company.

The Family II is a straight-4 piston engine that was originally developed by Opel in the 1970s, debuting in 1981. Available in a wide range of cubic capacities ranging from 1598 to 2405cc, it simultaneously replaced the Opel CIH and Vauxhall Slant-4 engines, and was GM Europe's core mid-sized powerplant design for much of the 1980s, and provided the basis for the later Ecotec series of engines in the 1990s.

<span class="mw-page-title-main">Volvo 900 Series</span> Range of executive cars made by Volvo Cars

The Volvo 900 Series is a range of executive cars produced by the Swedish manufacturer Volvo Cars from 1990 to 1998. The 900 Series was introduced in 1990 to replace the 700 Series from which it derived. Prior to the end of its production, the 960 was renamed as the Volvo S90 (saloon) and Volvo V90 (estate), and the 940 was renamed 940 Classic, becoming the last rear-wheel-drive cars from Volvo.

<span class="mw-page-title-main">Opel cam-in-head engine</span> Motor vehicle engine

The Opel cam-in-head engine (CIH) is a family of automobile engines built by former General Motors subsidiary Opel from 1965 until 1998, appearing extensively in Opel/Vauxhall badged cars during this period. Both four- and six-cylinder inline configurations were produced. The name derives from the location of the camshaft, which was neither cam-in-block nor a true overhead camshaft. In the CIH engine the camshaft is located in the cylinder head but sits alongside the valves rather than above them, so therefore effectively is still an overhead valve design. The valves are actuated through very short tappets and rocker arms. The four-cylinder CIH was largely supplanted by the Family II unit as Opel/Vauxhall's core mid-size engine in the 1980s. A four-cylinder version of the CIH remained in limited production until 1998, and six-cylinder versions of the CIH until 1995.

GM referred to many of its diesel engines as Ecotec including the GM Medium Diesel engine and the Isuzu-derived Circle L engine. This page describes the SOHC 16 valve turbocharged engines which GM introduced in 1997. and which were used extensively in its European models.

References

  1. 1 2 "Brefs" [In brief]. Echappement (in French). Paris, France: Michael Hommell (198): 23. April 1985.
  2. saabhistory.com
  3. "这款国产发动机不输帕萨特3.0L的V6,车长近5米,但没人买_手机搜狐网".
  4. Bedienungsanleitung-BJ40
  5. Bedienungsanleitung-X65
  6. "【图】萨博平台是主力 北京汽车平台技术解读_绅宝D70_汽车之家".
  7. "【图】国货当自强 评上海车展中国品牌发动机 _汽车之家".