Sand filter

Last updated
Sand filter used for water treatment Sand filter.jpg
Sand filter used for water treatment

Sand filters are used as a step in the water treatment process of water purification.

Contents

There are three main types; rapid (gravity) sand filters, upward flow sand filters and slow sand filters. All three methods are used extensively in the water industry throughout the world. The first two require the use of flocculant chemicals to work effectively while slow sand filters can produce very high quality water with pathogens removal from 90% to >99% (depending on the strains), taste and odour without the need for chemical aids. [1] Sand filters can, apart from being used in water treatment plants, be used for water purification in singular households as they use materials which are available for most people. [2]

History

The history of separation techniques reaches far back, as filter materials were already in use during ancient periods. Rushes and genista plants were used to fill sieving vessels that separated solid and liquid materials. The Egyptians also used porous clay vessels to filter drinking water, wine and other liquids. [3]

Sand bed filtration concept

Sand filters on a tomato farm in California 20150415-NRCS-LSC-0526 (20027438519).jpg
Sand filters on a tomato farm in California

A sand bed filter is a kind of depth filter. Broadly, there are two types of filters for separating particulate solids from fluids:

In addition, there are passive and active devices for causing solid-liquid separation such as settling tanks, self-cleaning screen filters, hydrocyclones and centrifuges. [4]

There are several kinds of depth filters, some employing fibrous material and others employing granular materials. Sand bed filters are an example of a granular loose media depth filter. They are usually used to separate small amounts (<10 parts per million or <10 g per cubic metre) of fine solids (<100 micrometres) from aqueous solutions. [5] :302–303 In addition, they are usually used to purify the fluid rather than capture the solids as a valuable material. Therefore they find most of their uses in liquid effluent (wastewater) treatment.

Particulate solids capture mechanisms

Sand bed filters work by providing the particulate solids with many opportunities to be captured on the surface of a sand grain. As fluid flows through the porous sand along a tortuous route, the particulates come close to sand grains. They can be captured by one of several mechanisms:

In addition, particulate solids can be prevented from being captured by surface charge repulsion if the surface charge of the sand is of the same sign (positive or negative) as that of the particulate solid. Furthermore, it is possible to dislodge captured particulates although they may be re-captured at a greater depth within the bed. Finally, a sand grain that is already contaminated with particulate solids may become more attractive or repel addition particulate solids. This can occur if by adhering to the sand grain the particulate loses surface charge and becomes attractive to additional particulates or the opposite and surface charge is retained repelling further particulates from the sand grain.

In some applications it is necessary to pre-treat the effluent flowing into a sand bed to ensure that the particulate solids can be captured. This can be achieved by one of several methods:

Operating regimes

They can be operated either with upward flowing fluids or downward flowing fluids the latter being much more usual. For downward flowing devices the fluid can flow under pressure or by gravity alone. Pressure sand bed filters tend to be used in industrial applications and often referred to as rapid sand bed filters. Gravity fed units are used in water purification especially drinking water and these filters have found wide use in developing countries (slow sand filters).

Overall, there are several categories of sand bed filter:

The sketch illustrates the general structure of a rapid pressure sand filter. The filter sand takes up most space of the chamber. It sits either on a nozzle floor or on top of a drainage system which allows the filtered water to exit. The pre-treated raw water enters the filter chamber on the top, flows through the filter medium and the effluent drains through the drainage system in the lower part. Large process plants have also a system implemented to evenly distribute the raw water to the filter. In addition, a distribution system controlling the air flow is usually included. It allows a constant air and water distribution and prevents too high water flows in specific areas. A typical grain distribution exits due to the frequent backwashing. Grains with smaller diameter are dominant in the upper part of the sand layer while coarse grain dominates in the lower parts.

Two processes influencing the functionality of a filter are ripening and regeneration.
At the beginning of a new filter run, the filter efficiency increases simultaneously with the number of captured particles in the medium. This process is called filter ripening. During filter ripening the effluent might not meet quality criteria and must be reinjected at previous steps in the plant. [6] Regeneration methods allow the reuse of the filter medium. Accumulated solids from the filter bed are removed. [6] During backwashing, water (and air) is pumped backwards through the filter system. Backwash water may partially be reinjected in front of the filter process and generated sewage needs to be discarded. The backwashing time is determined by either the turbidity value behind the filter, which must not exceed a set threshold, or by the head loss across the filter medium, which must also not exceed a certain value.

Rapid pressure sand bed filter design

Rapid pressure filter 1=raw water, 2=filtered water, 3=tank, 4=outlet flushing water, 5=inlet flushing water, 6=retraction line, 7=scavenging air, 8=injector, 9=supporting layer, 10=filter sand, 11=flushing funnel, 12=ventilation Kiesbettfilter.svg
Rapid pressure filter 1=raw water, 2=filtered water, 3=tank, 4=outlet flushing water, 5=inlet flushing water, 6=retraction line, 7=scavenging air, 8=injector, 9=supporting layer, 10=filter sand, 11=flushing funnel, 12=ventilation

Smaller sand grains provide more surface area and therefore a higher decontamination of the inlet water, but it also requires more pumping energy to drive the fluid through the bed. A compromise is that most rapid pressure sand bed filters use grains in the range 0.6 to 1.2 mm although for specialist applications other sizes may be specified. Larger feed particles (>100 micrometres) will tend to block the pores of the bed and turn it into a surface filter that blinds rapidly. Larger sand grains can be used to overcome this problem, but if significant amounts of large solids are in the feed they need to be removed upstream of the sand bed filter by a process such as settling. [5] :302–303

The depth of the sand bed is recommended to be around 0.6–1.8 m (2–6 ft) regardless of the application. This is linked to the maximum throughput discussed below. [5] :302–303

Guidance on the design of rapid sand bed filters suggests that they should be operated with a maximum flow rate of 9 m3/m2/hr (220 US gal/ft2/hr). [7] Using the required throughput and the maximum flow rate, the required area of the bed can be calculated.

The final key design point is to be sure that the fluid is properly distributed across the bed and that there are no preferred fluid paths where the sand may be washed away and the filter be compromised.

Rapid pressure sand bed filters are typically operated with a feed pressure of 2 to 5 bar(a) (28 to 70 psi(a)). The pressure drop across a clean sand bed is usually very low. It builds as particulate solids are captured on the bed. Particulate solids are not captured uniformly with depth, more are captured higher up with bed with the concentration gradient decaying exponentially. [5] :302–303

This filter type will capture particles down to very small sizes, and does not have a true cut off size below which particles will always pass. The shape of the filter particle size-efficiency curve is a U-shape with high rates of particle capture for the smallest and largest particles with a dip in between for mid-sized particles. [7]

The build-up of particulate solids causes an increase in the pressure lost across the bed for a given flow rate. For a gravity fed bed when the pressure available is constant, the flow rate will fall. When the pressure loss or flow is unacceptable and the filter is not working effectively any longer, the bed is backwashed to remove the accumulated particles. For a pressurized rapid sand bed filter this occurs when the pressure drop is around 0.5 bar. The backwash fluid is pumped backwards through the bed until it is fluidized and has expanded by up to about 30% (the sand grains start to mix and as they rub together they drive off the particulate solids). The smaller particulate solids are washed away with the backwash fluid and captured usually in a settling tank. The fluid flow required to fluidize the bed is typically 3 to 10 m3/m2/hr but not run for long (a few minutes). [5] :224–235 Small amounts of sand can be lost in the backwashing process and the bed may need to be topped up periodically.

Slow sand filter design

As the title indicates, the speed of filtration is changed in the slow sand filter, however, the biggest difference between slow and rapid sand filter, is that the top layer of sand is biologically active, as microbial communities are introduced to the system. The recommended and usual depth of the filter is 0.9 to 1.5 meters. Microbial layer is formed within 10–20 days from the start of the operation. During the process of filtration, raw water can percolate through the porous sand medium, stopping and trapping organic material, bacteria, viruses and cysts such as Giardia and Cryptosporidium . The regeneration procedure for slow sand filters is called scraping and is used to mechanically remove the dried out particles on the filter. However, this process can also be done under water, depending on the individual system. Another limiting factor for the water being treated is turbidity, which is for slow sand filters defined to be 10 NTU (Nephelometric Turbidity Units). Slow sand filters are a good option for limited budget operations as the filtration is not using any chemicals and requires little or no mechanical assistance. However, because of a continuous growing population in communities, slow sand filters are being replaced for rapid sand filters, mostly due to the running period length.

Characteristics of rapid and slow sand filters [6]

CharacteristicsRapid sand filterSlow sand filter
Filtration rate [m/h]5–150.08–0.25
Media effective size [mm]0.5–1.20.15–0.30
Bed depth [m]0.6–1.90.9–1.5
Run length1–4 days1–6 months
Ripening period15 min – 2 hSeveral days
Regeneration methodBackwashingScraping
Maximum raw-water turbidityUnlimited with proper pretreatment10 NTU

Upflow bed filter design

The continuously backflushing or upflow sand filter is the newest operating regime. The clearest difference with respect to the previous ones, is that the water to be filtered is fed from the bottom and the filtered water is obtained at the top. This reverse flow allows the backwash process to be integrated in the filtration process, thus decreasing the amount of rinse water to be used and reducing cleaning time. The maximum loading is about 5.4 lps/m2 with a constant head loss of 0.6 m. [8]

Mixed bed filters

Filters that have different filtering layers, are called mixed bed filters or multimedia filters. Sand is a common filter material, but anthracite, granular activated carbon (GAC), garnet and ilmenite are also common filter materials. Anthracite is a harder material and has less volatile compared to other coals. Ilmenite and garnet are heavy compared to sand. Garnet consists of several minerals, causing a shifting red colour. Ilmenite is an oxide of iron and titanium. GAC can be used in the process of adsorption and filtration at the same time. These materials can be used both alone, or combined with other media. But the filtering layers will be always arranged by density, heavier compounds will be settled in the bottom, while the lighter ones will be located on top. Different combinations give different filter classification and also different porosity throughout the filter, which is translated into different pressure drop. A very common arrangement for these filers is composed of: anthracite on top, sand and garnet, with a support of gravel at the bottom. The depth of these filters is normally between 0.6-1 m, above 1 m the pressure drop rises sharply and less than 0.6 m reduces the thickness of each filtering layer, thus reducing its efficienciy. Nomal operating flux and pressure drop are between 3-7 gpm/ft2 and 3-7 psi. When pressure drop increases above 10 psi, a backwash operation ins needed, which consist of reversing the flow (water goes upwards) in order to remove the particles trapped in the filtering media, and this will exit from the top of the filter with the backwash water. Common for the backwash is around 3 times the normal filtering flux (must be high enough to lift the filtering media to remove the particles trapped in it). Monomedia is a one layered filter, commonly consisting of sand and is today replaced by newer technology. Deep-bed monomedia is also a one layered filter which consist of either anthracite or GAC. The deep-bed monomedia filter is used when there is a consistent water quality and this gives a longer run time. Dual media (two layered) often contain a sand layer in the bottom with an anthracite or GAC layer on top. Trimedia or mixed media is a filter with three layers. Trimedia often have garnet or ilmenite in the bottom layer, sand in the middle and anthracite at the top.

Uses in water treatment

All of these methods are used extensively in the water industry throughout the world. The first three in the list above require the use of flocculant chemicals to work effectively. Slow sand filters produce high-quality water without the use of chemical aids.

Passing flocculated water through a rapid gravity sand filter strains out the floc and the particles trapped within it, reducing numbers of bacteria and removing most of the solids. The medium of the filter is sand of varying grades. Where taste and odor may be a problem (organoleptic impacts), the sand filter may include a layer of activated carbon to remove such taste and odor.

Sand filters become clogged with floc or bioclogged after a period in use. Slow sand filters are then scraped (see above) while rapid sand filters are backwashed or pressure washed to remove the floc. This backwash water is run into settling tanks so that the floc can settle out and it is then disposed of as waste material. The supernatant water is then run back into the treatment process or disposed of as a waste-water stream. In some countries, the sludge may be used as a soil conditioner. Inadequate filter maintenance has been the cause of occasional drinking water contamination.

Sand filters are occasionally used in the sewage treatment as a final polishing stage. In these filters the sand traps residual suspended material and bacteria and provides a physical matrix for bacterial decomposition of nitrogenous material, including ammonia and nitrates, into nitrogen gas.

Sand filters are one of the most useful treatment processes as the filtering process (especially with slow sand filtration) combines within itself many of the purification functions. [9]

Advantages and limitations

One of the advantages of sand filters is that they are useful for different applications. Moreover, the different types of operation modes: rapid, slow and Upflow, allow some flexibility to adapt the filtration method to the necessities and requirements of the users. Sand filters allow a high efficiency for color and microorganisms removal, and as they are very simple, operating costs are very low. What is more, its simplicity makes the automation of the processes easier, thus requiring less human intervention.

The main limitations of this technology would be related to the clogging, that is, the obstruction of the filter media, which requires a significant amount of water to carry out the backflush operation and the use of chemicals in the pretreatment. Furthermore, slow sand filters usually require larger land areas compared to the rapid flow, especially if the raw water is highly contaminated. However, despite these limitations, they offer much more capabilities and that is why they are extensively used in the industry. [10] [11]

Challenges in the application process

In the process of water treatment, one should be aware of certain factors that might cause serious problems if not treated properly. Aforementioned processes such as filter ripening and backwashing influence not only the water quality but also the time needed for the full treatment. Backwashing reduces also the volume of the effluent. If a certain amount of water has to be delivered to e.g. a community, this water loss needs to be considered. In addition, backwashing waste needs to be treated or properly discarded. From the chemical perspective, varying raw water qualities and changes in the temperature effect, already at the entrance to the plant, the efficiency of the treatment process.

Considerable uncertainty is involved regarding models used to construct sand filters. This is due to mathematical assumptions that have to be made such as all grains being spherical. The spherical shape affects the interpretation of the size since the diameter is different for spherical and non-spherical grains. The packing of the grains within the bed is also dependent on the shape of the grains. This then affects the porosity and hydraulic flow. [6]

Uses in industry

Sand filters are used in various sectors and processes, where far-reaching removal of suspended matter from water or wastewater is required.

Sectors where sand filtration is implemented include drinking water production, swimming pools, car washes, groundwater treatment, RWZI, slaughterhouses, fruit and vegetable processing industry, drinks, food industry, surface treatment of metals, …

Cooling water production, drinking water preparation, pre-filtration in active carbon treatments and membrane systems, and the filtration of swimming pool water.

See also

Related Research Articles

<span class="mw-page-title-main">Filtration</span> Process that separates solids from fluids

Filtration is a physical separation process that separates solid matter and fluid from a mixture using a filter medium that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter medium are described as oversize and the fluid that passes through is called the filtrate. Oversize particles may form a filter cake on top of the filter and may also block the filter lattice, preventing the fluid phase from crossing the filter, known as blinding. The size of the largest particles that can successfully pass through a filter is called the effective pore size of that filter. The separation of solid and fluid is imperfect; solids will be contaminated with some fluid and filtrate will contain fine particles. Filtration occurs both in nature and in engineered systems; there are biological, geological, and industrial forms.

Water purification is the process of removing undesirable chemicals, biological contaminants, suspended solids, and gases from water. The goal is to produce water that is fit for specific purposes. Most water is purified and disinfected for human consumption, but water purification may also be carried out for a variety of other purposes, including medical, pharmacological, chemical, and industrial applications. The history of water purification includes a wide variety of methods. The methods used include physical processes such as filtration, sedimentation, and distillation; biological processes such as slow sand filters or biologically active carbon; chemical processes such as flocculation and chlorination; and the use of electromagnetic radiation such as ultraviolet light.

Microfiltration is a type of physical filtration process where a contaminated fluid is passed through a special pore-sized membrane filter to separate microorganisms and suspended particles from process liquid. It is commonly used in conjunction with various other separation processes such as ultrafiltration and reverse osmosis to provide a product stream which is free of undesired contaminants.

<span class="mw-page-title-main">Media filter</span>

A media filter is a type of filter that uses a bed of sand, peat, shredded tires, foam, crushed glass, geo-textile fabric, anthracite, crushed granite or other material to filter water for drinking, swimming pools, aquaculture, irrigation, stormwater management, oil and gas operations, and other applications.

<span class="mw-page-title-main">Water filter</span> Device that removes impurities in water

A water filter removes impurities by lowering contamination of water using a fine physical barrier, a chemical process, or a biological process. Filters cleanse water to different extents, for purposes such as: providing agricultural irrigation, accessible drinking water, public and private aquariums, and the safe use of ponds and swimming pools.

In the oil industry, waterflooding or water injection is where water is injected into the oil reservoir, to maintain the pressure, or to drive oil towards the wells, and thereby increase production. Water injection wells may be located on- and offshore, to increase oil recovery from an existing reservoir.

<span class="mw-page-title-main">Slow sand filter</span> Water purification device

Slow sand filters are used in water purification for treating raw water to produce a potable product. They are typically 1–2 m (3.3–6.6 ft) deep, can be rectangular or cylindrical in cross section and are used primarily to treat surface water. The length and breadth of the tanks are determined by the flow rate desired for the filters, which typically have a loading rate of 200–400 litres (0.20–0.40 m3) per square metre per hour.

<span class="mw-page-title-main">Backwashing (water treatment)</span>

In terms of water treatment, including water purification and sewage treatment, backwashing refers to pumping water backwards through the filters media, sometimes including intermittent use of compressed air during the process. Backwashing is a form of preventive maintenance so that the filter media can be reused. In water treatment plants, backwashing can be an automated process that is run by local programmable logic controllers (PLCs). The backwash cycle is triggered after a set time interval, when the filter effluent turbidity is greater than a treatment guideline or when the differential pressure across the filter exceeds a set value.

<span class="mw-page-title-main">Rapid sand filter</span>

The rapid sand filter or rapid gravity filter is a type of filter used in water purification and is commonly used in municipal drinking water facilities as part of a multiple-stage treatment system. These systems are complex and expensive to operate and maintain, and therefore less suitable for small communities and developing nations.

<span class="mw-page-title-main">Cross-flow filtration</span>

In chemical engineering, biochemical engineering and protein purification, crossflow filtration is a type of filtration. Crossflow filtration is different from dead-end filtration in which the feed is passed through a membrane or bed, the solids being trapped in the filter and the filtrate being released at the other end. Cross-flow filtration gets its name because the majority of the feed flow travels tangentially across the surface of the filter, rather than into the filter. The principal advantage of this is that the filter cake is substantially washed away during the filtration process, increasing the length of time that a filter unit can be operational. It can be a continuous process, unlike batch-wise dead-end filtration.

<span class="mw-page-title-main">Aquarium filter</span>

Aquarium filters are critical components of both freshwater and marine aquaria. Aquarium filters remove physical and soluble chemical waste products from aquaria, simplifying maintenance. Furthermore, aquarium filters are necessary to support life as aquaria are relatively small, closed volumes of water compared to the natural environment of most fish.

Depth filters are filters that use a porous filtration medium to retain particles throughout the medium, rather than just on the surface of the medium. Depth filtration, typified by multiple porous layers with depth, is used to capture the solid contaminants from the liquid phase. These filters are commonly used when the fluid to be filtered contains a high load of particles because, relative to other types of filters, they can retain a large mass of particles before becoming clogged.

Moving Bed Heat Exchangers are widely used in industry, on applications involving heat recovery and filtering.

<span class="mw-page-title-main">Membrane</span> Thin, film-like structure separating two fluids, acting as a selective barrier

A membrane is a selective barrier; it allows some things to pass through but stops others. Such things may be molecules, ions, or other small particles. Membranes can be generally classified into synthetic membranes and biological membranes. Biological membranes include cell membranes ; nuclear membranes, which cover a cell nucleus; and tissue membranes, such as mucosae and serosae. Synthetic membranes are made by humans for use in laboratories and industry.

Spa filters work continuously to keep debris and sediments from the water in a spa pool.

Gravity filtration is a method of filtering impurities from solutions by using gravity to pull liquid through a filter. The two main kinds of filtration used in laboratories are gravity and vacuum/suction. Gravity filtration is often used in chemical laboratories to filter precipitates from precipitation reactions as well as drying agents, inadmissible side items, or remaining reactants. While it can also be used to separate out strong products, vacuum filtration is more commonly used for this purpose.

The Walton water treatment works are an advanced purification works supplied with raw water and producing and delivering potable water to the locality and into the Thames Water ring main. The Walton water treatment works were initially built in 1907 north of the Bessborough and Knight reservoirs which supply the water works.

<span class="mw-page-title-main">Coppermills Water Treatment Works</span> Water treatment works in east London

The Coppermills Water Treatment Works is a large water treatment works in the Lea Valley in east London. Completed in 1969 by the Metropolitan Water Board, it is now owned and operated by Thames Water. In 2009, Coppermills was connected to the Thames Water Ring Main via the Northern Extension Tunnel, enabling the facility to be a major supplier of water to the whole London area. It is capable of supplying a maximum of 680 million litres of water per day.

Pile Cloth Media Filtration is a mechanical process for the separation of organic and inorganic solids from liquids. It belongs to the processes of surface filtration and cake filtration where, in addition to the sieve effect, real filtration effects occur over the depth of the pile layer. Pile Cloth Media Filtration represents a branch of cloth filtration processes and is used for water and wastewater treatment in medium and large scale. In Pile Cloth Media Filtration, three-dimensional textile fabrics are used as filter media. During the filter cleaning of the pile layer the filtration process continues and is not interrupted.

Diatomaceous earth (DE) filtration is a special filtration process that removes particles from liquids as it passes through a layer of fossilized remains of microscopic water organism called diatoms. These diatoms are mined from diatomite deposits which are located along the Earth's surface as they have accumulated in sediment of open and moving bodies of water. Obtained diatomaceous earth is then purified using acid leaching or liquid-liquid extraction in order for it to be used in any form of application. The process of D.E. filtration is composed of three main stages: pre-coating, body feed, and cleaning.

References

  1. "Slow Sand Filtration" (PDF). National Drinking Water Clearinghouse.
  2. "Household Sand Filters for Arsenic Removal" (PDF). EAWAG.
  3. Anlauf, Harald (2003). "Mechanische Fest/Flüssig-Trennungim Wandel der Zeit". Chemie Ingenieur Technik. 75 (10): 1460–1463. doi:10.1002/cite.200303283.
  4. 1 2 3 A. Rushton, A. S. Ward, R. G. Holdich (1996). Introduction to Solid-Liquid Filtration and Separation Technology. Wiley VCH. ISBN   978-3-527-28613-3
  5. 1 2 3 4 5 Coulson, J. M.; Richardson, J. F.; Backhurst, J. R., Harker, J. H. (1991). Chemical Engineering. Vol.2, 4th ed. ISBN   0-7506-2942-8.
  6. 1 2 3 4 Crittenden, John C.; Trussell, R. Rhodes; Hand, David W.; Howe, Kerry J.; Tchobanoglous, George (2012). MWH's water treatment: principles and design (3rd ed.). Hoboken, N.J.: John Wiley & Sons. ISBN   9780470405390.
  7. 1 2 K. J. Ives (1990). "Deep Bed Filtration". Chap. 11 of Solid-Liquid Separation, 3rd ed., L. Svarovsky (ed). Butterworths. ISBN   0-408-03765-2
  8. "Chapter 10 Suspended solids removal". Design and Operating Guide for Aquaculture Seawater Systems. Developments in Aquaculture and Fisheries Science. Vol. 33. 2002. pp. 137–149. doi:10.1016/S0167-9309(02)80010-2. ISBN   9780444505774.
  9. Huisman, L.; Wood, W. E. (1974). Slow sand filtration. Geneva: World Health Organization. ISBN   978-9241540377.
  10. "Slow Sand Filter | Working, Efficiency, Advantages & Disadvantages of Slow Sand Filter". 6 December 2021.
  11. "Sand filtration | EMIS".
  12. "Sand filtration | EMIS".