Shelby Can-Am

Last updated
Shelby Can-Am
Category Sports car
Constructor Racefab Inc.
Designer(s) Carroll Shelby
Pete Brock (bodywork)
David Bruns (chassis)
Technical specifications
Suspension (front)Upper & lower unequal length tubular steel A-arms, adjustable hollow anti-roll bars and aluminum uprights
Suspension (rear)Upper & lower unequal length tubular steel A-arms, adjustable hollow anti-roll bars and aluminum uprights
Length168.5 in (428.0 cm)
Width77.5 in (196.9 cm)
Height41 in (104.1 cm)
Engine Dodge (1991-1996)
Nissan VQ35 (2000-present)
3,300 cc (201.4 cu in) (1991-1996)
3,500 cc (213.6 cu in) (2010-present) V6 mid
Weight850 kg (1,873.9 lb)
Competition history
Debut1991

The Shelby Can-Am is a sports car that had its own racing class in the United States between 1991 and 1996. Some of the models were shipped off to South Africa to race there, where they continued to be campaigned until about 2015.

Contents

History

Shelby Dodge Pro Series (1991-1996)
MSA Shelby Can-Am (2000-2015)
Category Sports cars
CountryUSA
South Africa
Inaugural season1991 (USA)
Folded1996 (USA)
2015 (South Africa)
Constructors Racefab Inc.
Engine suppliers Dodge (1991-1996)
Nissan (2000-present)
Tyre suppliers Goodyear (1991-1996)
Hoosier (2000-present)

United States

A Shelby Can-Am race car Shelby can am.jpg
A Shelby Can-Am race car

After the original Can-Am folded after the 1987 season the SCCA looked for a new sports car class. In 1989 Caroll Shelby joined the SCCA to design a new single make sports car racing car. The car, built by Racefab Inc., went in production in 1990. The first race was a demonstration event during the SCCA National Championship Runoffs. The Shelby Can-Am class, and a pro series were launched by the SCCA in 1991. [1] The pro series ran for six years. Memo Gidley made his pro racing debut in 1993. It also was a class at the SCCA National Championship Runoffs between 1991 and 1996. 20 drivers started the 1991 Runoffs race. David Tenny, who started from pole-position, won the race. [2] The following year the field was drastically reduced to 14 drivers. [3] Only four drivers started the last Shelby Can-Am Runoffs race in 1996. [4] Chassis number #066 was converted into a Le Mans Prototype. [5] The car, the LR-93, was entered by Cliff Rassweiler and James Lee in the 1993 IMSA GT Championship. The car failed to finish both races it was entered due to mechanical failure. [6] The car was restored to the original Shelby Can-Am specifications and shipped off to South Africa.

The 1997 Oldsmobile Aurora V8-powered prototype 1997 Shelby Aurora V8 Can-Am prototype, Bonhams.jpg
The 1997 Oldsmobile Aurora V8-powered prototype

In 1997, Shelby finished an Oldsmobile-powered prototype meant to continue the Can-Am series, but it remained a one-off. It had the new four-cam Aurora V8 engine, tuned to about 500 hp (370 kW). [7]

South Africa

In 1998 there was a need for a Development class in SA and the Sports 2000 class was used for this vision and South Africa's motorsports sanctioning body was looking for an alternative to replace the successful Sports 2000 class with 32 cars on National level. 28 Shelby Can-Am cars were bought up and shipped to South Africa. The aging Dodge engine was replaced by a Nissan VQ35 engine. The series was launched with financial support from Vodacom which would be a naming sponsor of the series until 2005. The inaugural season saw 39 different drivers at least competing in at least one race. The series was part of the Pro-Tour at first, joining the other national racing classes of South Africa. In 2008 Jeroen Bleekemolen raced one weekend in the series in preparation of the A1GP weekend at Kyalami. The Dutch driver achieved a pole position but had no luck in the races with two DNF's. [8] He returned the following year again achieving a pole position. This converted in a win in the first race. [9] Both times Bleekemolen replaced regular driver Bertil Hoffman, whom also races under a Dutch licence.

For 2008 the Can-Am cars got a new bodywork. This bodywork made the cars look more like a modern-day Le Mans Prototype. [10] As of the 2013 season the class merged with a GT series to form the SA Sports & V8 GT. To limit costs tyre usage and car modifications are strictly regulated. The Shelby Can-Am made its first appearance in The African Six Hour in 2013. A Juno Group CN car won the race but Shelby Can-Am cars filled the rest of the top five. [11] At Phakisa Freeway, Thomas Reib and Sean Greve were classified in second place, the best result of the Shelby Can-Am cars.2014 Final round of 2014 Regional Races at Killarney as well as the Africa 3 Hour which finished with a fantastic tussle between the two local Juno entries. Francis Carruthers (Scotland) and Nick Adcock (England), Malta Juno SS3 3.0 taking a 10.048 second victory from Steve Humble and Ferdi van Niekerk Jnr in their Malta Juno CN 2.0. Third overall went to Mark Lauth and Mike Verrier, Black Chrome Shelby Can-Am. In 2014 Alan Eve is the overall winner of the 2014 Shelby Can-Am Racing National Championship, Master Champion and the overall 2014 SA Sports and V8 Supercars Champion. 2015 Shelby Can-Am Racing competitors will run in the African Endurance series with the 6 Hour Phakisa Freeway race first up on 28 February 2015.

Car

A Shelby Can Am tube frame chassis on the surface plate at Racefab Inc. Racefab Inc. Shelby Can Am Chassis.jpg
A Shelby Can Am tube frame chassis on the surface plate at Racefab Inc.

Initially two prototypes were built, chassis numbers PX-1 and PX-2. [12] [13] Steve Hope was one of the testdrivers. The first complete chassis was bought by W. Jerry Gillis, who would win the 1996 Pro Series title. The cars were built by Racefab Inc. from Rusk, Texas. The tube frame chassis, designed by David Bruns was fitted with a four-speed Weismann transaxle. The engine was production based derived from a Dodge Intrepid. The Dodge engine was upgraded to produce 255hp. [14] Pete Brock designed the wedge-shaped body.

When the car was introduced in South Africa the Dodge engine was replaced by a Nissan VQ engine as used on the Nissan 350Z. The engine capacity increased to 3500cc and the horsepower increased to 300 hp. The bodywork designed by Peter Brock in 1989 was replaced by a modern redesign in 2006 by Gregary Bailey giving it a more modern Le Mans Prototype look. In 2012 a second version body design was completed again by Bailey. This design incorporated front splitter and a rear venturi tunnel. The design was based on the Bailey LMP2. The new body was built in South Africa by Bailey Cars. The new design increased downforce and reduced drag with reduced lap times by 2 seconds per lap at Zwartkops Raceway. The Bodywork was made out of fibreglass.

Champions

YearDriverChassisNational Championship RunoffsChassisJune SprintsChassis
1991 Flag of the United States.svg David Tenney #032 Flag of the United States.svg David Tenney #032
1992 Flag of the United States.svg Scott Harrington #008 Flag of the United States.svg David Tenney #032
1993 Flag of the United States.svg Kyle Konzer #043 Flag of the United States.svg Mike Davies #055 Flag of the United States.svg Jim Heule #058
1994 Flag of the United States.svg Mike Davies #055 Flag of the United States.svg Mike Davies #055
1995 Flag of the United States.svg Mike Davies #055 Flag of the United States.svg Mike Davies #055
1996 Flag of the United States.svg W. Jerry Gillis #001 Flag of the United States.svg Jeffrey Tyler #046
Shelby Can-Am South Africa
1999 Flag of South Africa.svg Francois Gerber #042
2000 Flag of South Africa.svg Francois Gerber #042
2001 Flag of South Africa.svg George Ferreira #072 [15]
2002 Flag of South Africa.svg Bernard Tilanus #003
2003 Flag of South Africa.svg Neil Lobb #066
2004 Flag of South Africa.svg Garth Waberski #050
2005 Flag of South Africa.svg Neil Lobb #066
2006 Flag of South Africa.svg Ruan Pretorius #050
2007 Flag of South Africa.svg Darryn Lobb #062
2008 Flag of South Africa.svg Flag of Portugal.svg Rui Campos #048
2009 Flag of South Africa.svg Darryn Lobb #066
2010 Flag of South Africa.svg Darryn Lobb #066
2011 Flag of South Africa.svg Flag of Portugal.svg Rui Campos #048
2012 Flag of South Africa.svg Flag of Portugal.svg Rui Campos #048
2013 Flag of South Africa.svg Flag of Portugal.svg Rui Campos #048
2014 Flag of South Africa.svg Alan Eve #058 [16]

Other notable drivers

United States

South Africa

Related Research Articles

<span class="mw-page-title-main">Ford GT40</span> High-performance endurance racing car

The Ford GT40 is a high-performance endurance racing car designed and built by the Ford Motor Company. It grew out of the "Ford GT" project, an effort to compete in European long-distance sports car races, against Ferrari, who had won the prestigious 24 Hours of Le Mans race from 1960 to 1965. Ford succeeded with the GT40, winning the 1966 through 1969 races.

<span class="mw-page-title-main">Carroll Shelby</span> American racing driver and automotive designer (1923–2012)

Carroll Hall Shelby was an American automotive designer, racing driver and entrepreneur. Shelby is best known for his involvement with the AC Cobra and Mustang for Ford Motor Company, which he modified during the late 1960s and early 2000s. He established Shelby American in 1962 to manufacture and market performance vehicles. His autobiography, The Carroll Shelby Story, was published in 1967.

<span class="mw-page-title-main">Formula Vee</span> Race car class

Formula Vee or Formula Volkswagen is a popular open wheel, single-seater junior motor racing formula, with relatively low costs in comparison to Formula Ford.

<span class="mw-page-title-main">Mark Donohue</span> American racing driver (1937–1975)

Mark Neary Donohue Jr., nicknamed "Captain Nice," and later "Dark Monohue," was an American race car driver and engineer known for his ability to set up his own race car as well as driving it to victories.

<span class="mw-page-title-main">Can-Am</span> Sports car racing series from 1966 to 1987

The Canadian-American Challenge Cup, or Can-Am, was an SCCA/CASC sports car racing series from 1966 to 1974, and again from 1977 to 1987.

<span class="mw-page-title-main">Formula 5000</span> Former Single-Seater Racing class

Formula 5000 was an open wheel, single seater auto-racing formula that ran in different series in various regions around the world from 1968 to 1982. It was originally intended as a low-cost series aimed at open-wheel racing cars that no longer fit into any particular formula. The '5000' denomination comes from the maximum 5.0 litre engine capacity allowed in the cars, although many cars ran with smaller engines. Manufacturers included McLaren, Eagle, March, Lola, Lotus, Elfin, Matich and Chevron.

<span class="mw-page-title-main">Le Mans Prototype</span> Sportscar endurance racing class

A Le Mans Prototype (LMP) is a type of sports prototype race car used in various races and championships, including the 24 Hours of Le Mans, FIA World Endurance Championship, IMSA SportsCar Championship, European Le Mans Series and Asian Le Mans Series. Le Mans Prototypes were created by the Automobile Club de l'Ouest (ACO). The technical requirements for an LMP include bodywork covering all mechanical elements of the car. As of 2023, there are two classes within Le Mans Prototypes, designated LMP2 and LMP3.

<span class="mw-page-title-main">Formula Ford</span> Race car class

Formula Ford, also known as F1600 and Formula F, is an entry-level class of single-seater, open-wheel formula racing. The various championships held across the world form an important step for many prospective Formula One drivers. Formula Ford has traditionally been regarded as the first major stepping stone into formula racing after karting. The series typically sees career-minded drivers enter alongside amateurs and enthusiasts. Success in Formula Ford can lead directly to other junior formula series such as a Formula Renault 2.0 and Formula Three, or the W Series for female drivers.

<span class="mw-page-title-main">Daytona Prototype</span> Prototype racing car

A Daytona Prototype was a type of sports prototype racing car developed specifically for the Grand American Road Racing Association's Rolex Sports Car Series as their top class of car, which replaced their main prototype racing class, specifically Le Mans Prototypes (LMPs). The cars later competed in the merged series of the IMSA SportsCar Championship, from 2014 to 2016, before being phased out and replaced by the Daytona Prototype International class in 2017. They are named after the main series event, the Rolex 24 at Daytona.

<span class="mw-page-title-main">Riley Technologies</span> American auto racing constructor and team

Riley Technologies LLC is an American auto racing constructor and team specializing in the design and manufacture of complete race cars, as well as prototype development for racing and manufacturing applications.

<span class="mw-page-title-main">Shelby American</span> American automobile manufacturer

Shelby American, Inc. is an American high performance automobile company founded by driver Carroll Shelby. The Shelby American name has been used by several legally distinct corporations founded by Shelby since his original shop in Venice, California began operation in 1962. The current iteration is a wholly owned subsidiary of Carroll Shelby International, Inc., a holding company formed in 2003. Carroll Shelby International's other wholly owned subsidiary is Carroll Shelby Licensing, which licenses the name and trademarks associated with Shelby to other companies. Shelby American was the first automobile manufacturer in the state of Nevada. Shelby American manufactures component automobiles, including replicas of the small-block and large-block AC Cobras, the Shelby GT350 and the GT500 Super Snake. Since 2005, Shelby American has released new models each year.

<span class="mw-page-title-main">USF2000 Championship</span> American racing series

The USF2000 Championship Presented by Continental Tire is an American racing series using an American variation of the Formula Ford standard, "F2000", that resumed operation for the 2010 season. As of 2022, it is sanctioned by the United States Auto Club, and is the second rung of the Road to Indy.

<span class="mw-page-title-main">Formula Enterprises</span> Single-Seater Racing Championship

Formula Enterprises or Formula SCCA is a class of open wheel race car sanctioned by the Sports Car Club of America. A spec racing class, all chassis are produced by SCCA Enterprises in association with Van Diemen and include a sealed Mazda MZR powerplant. The chassis can also be fitted with closed-wheel bodywork and converted into a sportscar to race in C Sports Racer or the L3 class of IMSA Prototype Lites. For the 2012 season, the car was also accepted into the U.S. F2000 National Championship's National Class. According to the manufacturer's website, as of March 2010, 120 of the cars have been sold.

SCCA Pro Racing is the pro racing division of the Sports Car Club of America. SCCA Pro Racing was formed in 1963; the company is a fully owned subsidiary of SCCA.

Carbir Race Cars is an American race car constructor.

Crawford Composites is an American manufacturer of carbon fiber and composite parts company based in Denver, North Carolina. Crawford designs and manufacture structural and non-structural composite components in industries such as aerospace, aviation, motor sports, health care, defense and structural construction.

<span class="mw-page-title-main">Racefab Inc.</span>

Racefab Inc. is a company formed by Joel Jackson in 1991.

Bill Rutan was a racing driver and hillclimb racer. Rutan was the winner of the Climb to the Clouds hillclimb in 1961. Rutan also won the SCCA National Championship Runoffs twice in the Formula C class.

Autodynamics Inc. is a former American racecar manufacturer based in Marblehead, Massachusetts. The company mainly produced Formula Vee and Formula Ford chassis. The company was also active in the Trans-Am Series entering Dodge Challengers in the 1970 season.

<span class="mw-page-title-main">Ferrari SP</span> Series of Italian sports prototype racing cars produced by Ferrari during the early 1960s

The Ferrari SP was a series of Italian sports prototype racing cars produced by Ferrari during the early 1960s. All featured a rear mid-engine layout, a first for a Ferrari sports car. Major racing accolades include the 1962 European Hill Climb Championship, two overall Targa Florio victories, in 1961 and 1962, and "1962 Coupe des Sports" title.

References

  1. "Shelby Can-Am". Old Racing Cars. Retrieved 22 February 2014.
  2. "SCCA National Championship Runoffs Shelby Can-Am 1991". DriverDB.com. Retrieved 22 February 2014.
  3. "SCCA National Championship Runoffs Shelby Can-Am 1992". DriverDB.com. Retrieved 22 February 2014.
  4. "SCCA National Championship Runoffs Shelby Can-Am 1996". DriverDB.com. Retrieved 22 February 2014.
  5. "Chassis #066". Shelby Can-Am Registry. Retrieved 24 February 2014.
  6. "International Motor Sport Association 1993". World Sports Racing Prototypes. Archived from the original on 1 February 2014. Retrieved 24 February 2014.
  7. "One-of-One – The 1997 Shelby Aurora V8 Can-Am Prototype". Silodrome. 22 May 2018. Retrieved 2018-06-25.
  8. "Div: Ondanks pech mooie ervaring Jeroen Bleekemolen in Shelby Can-Am". Autosport.nl. Retrieved 24 February 2014.
  9. "Jeroen Bleekemolen rolt Shelby CanAm concurrentie op: "Ze willen me hier hebben"". RaceXpress. Retrieved 24 February 2014.
  10. "Development". Shelby Can-Am. Archived from the original on August 24, 2012. Retrieved 24 February 2014.
  11. "African Six Hour" (PDF). Pro Timing. Retrieved 24 February 2014.
  12. "Chassis #PX1". Shelby Can-Am Registry. Retrieved 24 February 2014.
  13. "Chassis #PX2". Shelby Can-Am Registry. Retrieved 24 February 2014.
  14. "Hemmings Motor News". Former Shelby Can-Am screamer is a satisfying weekend steed. Retrieved 24 February 2014.
  15. Robert Johnston, Historian, SCA
  16. Robert Johnston, Historian, SCA