Angkasa dan Teknologi Singapura Ltd (Malay) 新加坡航天科技有限公司 (Chinese) சிங்கப்பூர் விண்வெளி மற்றும் தொழில்நுட்ப லிமிடெட் (Tamil) | |
Agency overview | |
---|---|
Abbreviation | SSTL |
Formed | 22 February 2007 |
Type | Space agency |
Headquarters | 318 Tanglin Road (Phoenix Park), #01-39, Singapore 247979 |
Key people | Jonathan Hung (President) Lynette Tan (Chief Executive) |
Website | https://www.space.org.sg/ |
Singapore Space and Technology Ltd (SSTL) is a non-governmental space organization based in Singapore within the aerospace industry. [1] [2] [3] [4] SSTL is recognized by the International Astronautical Federation. [1] [ citation needed ]
The SSTL board of directors is currently led by Jonathan Hung as its current executive chairman, and includes an advisory council composed of representatives of stakeholders in the Singapore Aerospace industry. [5]
Name | Position |
---|---|
Lui Pao Chuen (Chairman of the Advisory Board) | Advisor, National Research Foundation, Prime Minister's Office |
Cheong Chee Hoo | Chief Executive Officer, DSO National Laboratories |
Dan Hastings | Head of Aeronautics and Astronautics Department, MIT |
Edwin Chow | Assistant Chief Executive Officer, Enterprise Singapore |
Kwoh Leong Keong | Director, Centre for Remote Imaging, Sensing and Processing (CRISP) |
Tan Boon Khai | Chief Executive Officer, JTC Corporation |
On 15 November 2017, SSTL signed a contract with the Japan Aerospace Exploration Agency (JAXA) [6] to launch the "SpooQy - 1" CubeSAT developed by the National University of Singapore (NUS) via the Kibo Program on board the International Space Station. SpooQy-1 will attempt to demonstrate quantum entanglement using a CubeSat in Low Earth Orbit (LEO). [7]
SSTL is Singapore’s administrator for the utilization of the Japanese Experiment Module (JEM) on the International Space Station (ISS) for education and technical development. JEM, also known as Kibo (the Japanese word for "hope") is the Japanese science module of the ISS and the largest ISS module. The Japan Experiment Module (JEM) serves as a hub for experiments spanning scientific, medical, and educational domains. This includes experiments performed by Japanese astronauts, in-orbit trials of emerging technologies within the conditions of space, and the deployment of CubeSats along with other diminutive satellites.
SSTL co-organizes the regional rotational APRSAF conference with JAXA whenever Singapore plays host to the annual conference. It co-organized the 18th and 25th edition of APRSAF in 2011 and 2018 respectively. [8] [9]
SSTL organizes the Global Space and Technology Conference (GSTC) annually in February. [10] The GSTC is the Asia's premier space and technology event[ citation needed ], facilitating trade and regional collaboration for space and satellite businesses.
Speakers and Moderators for previous GSTCs have included:
SSTL works in collaboration with the National Trade Union Council (NTUC) Employment and Employability Institute to organise space exposure talks to bring the space industry to the general public. [12]
Each year, SSTL organizes the International Space Challenge (ISC) [13] – a global space design contest, invites student teams to apply space technology creatively to solve practical challenges on Earth. The initiative, known as the STL, seeks to build an interest in space technology and its earthly applications among the youth. It also seeks to discover future commercial products.
Initially launched as the Singapore Space Challenge (SSC) in 2007, the contest has since expanded and rebranded to the International Space Challenge (ISC) in 2021. The challenge encourages young people to work in teams to address problems devised in collaboration with industry experts. The 2021 edition witnessed the participation of over 2000 young individuals and attracted attention from more than 20 countries globally[ citation needed ].
SSTL co-ordinates Singaporean submissions for the Asian Try-Zero G Challenge sent to JAXA. In 2016, a Singaporean mission idea was successfully selected and the experiment was performed aboard the International Space Station. [14]
Across the world, countries have recognized the need of utilizing remote sensing satellite technologies as a critical tool in real-time disaster management. SSTL launched the Humanitarian Assistance and Disaster Relief (HADR) challenge [15] to invoice companies, start-ups, research groups or students and identify solutions to problems of coordination and technology usage within the context of HADR.
Current and previous participating organizations have included World Bank, GISTDA, and National University of Singapore.
Intended to teach participants aged 18 years and above the basics of building a nanosatellite.
In 2020, SSTL began a space-based accelerator programme [16] in Singapore to support space tech startups in the sector. The accelerator programme is supported by Enterprise Singapore (ESG). Through the programme, SSTL works with local and international startups of varying maturity levels from pre-seed up to Series B, who are working on space hardware products and services. It currently has over 30 international and local startups in its program[ citation needed ].
SSTL, in conjunction with Cap Vista, have developed a specialised track called Project Cyclotron, [17] which supports early-stage high-risk space hardware startups that are developing deep[ clarification needed ] technologies.
The Japanese Experiment Module (JEM), nicknamed Kibō, is a Japanese science module for the International Space Station (ISS) developed by JAXA. It is the largest single ISS module, and is attached to the Harmony module. The first two pieces of the module were launched on Space Shuttle missions STS-123 and STS-124. The third and final components were launched on STS-127.
The H-II Transfer Vehicle (HTV), also called Kounotori, is an expendable, automated cargo spacecraft used to resupply the Kibō Japanese Experiment Module (JEM) and the International Space Station (ISS). The Japan Aerospace Exploration Agency (JAXA) has been working on the design since the early 1990s. The first mission, HTV-1, was originally intended to be launched in 2001. It launched at 17:01 UTC on 10 September 2009 on an H-IIB launch vehicle. The name Kounotori was chosen for the HTV by JAXA because "a white stork carries an image of conveying an important thing, therefore, it precisely expresses the HTV's mission to transport essential materials to the ISS". The HTV is very important for resupplying the ISS because after the retirement of the Space Shuttle it is the only vehicle that can transfer new 41.3 in (105 cm) wide International Standard Payload Racks (ISPRs) and dispose old ISPRs that can fit the 51 in (130 cm) wide tunnels between modules in the US Orbital Segment.
RAIKO is a Japanese satellite which was built and operated by Tohoku and Wakayama Universities. A two-unit CubeSat, RAIKO was deployed from the International Space Station (ISS) on 4 October 2012, having been launched on 21 July 2012.
The Extreme Universe Space Observatory onboard Japanese Experiment Module (JEM-EUSO) is the first space mission concept devoted to the investigation of cosmic rays and neutrinos of extreme energy (E > 5×1019 eV). Using the Earth's atmosphere as a giant detector, the detection is performed by looking at the streak of fluorescence produced when such a particle interacts with the Earth's atmosphere.
The Minus Eighty-Degree Laboratory Freezer for ISS (MELFI) is a European-built experiment storage freezer for the International Space Station. It comprises four independent dewars which can be set to operate at different temperatures. Currently temperatures of −80 °C, −26 °C, and +4 °C are used during on-orbit ISS operations. Both reagents and samples will be stored in the freezer. As well as storage the freezer is designed to be used to transport samples to and from the ISS in a temperature controlled environment. The total capacity of the unit is 300 litres.
Akihiko Hoshide is a Japanese engineer, JAXA astronaut, and former commander of the International Space Station. On August 30, 2012, Hoshide became the third Japanese astronaut to walk in space.
HTV-1, also known as the HTV Demonstration Flight or HTV Technical Demonstration Vehicle, was the first flight of the Japanese Space Agency (JAXA) H-II Transfer Vehicle, launched in September 2009 to resupply the International Space Station and support the JAXA Kibō module or Japanese Experiment Module (JEM). It was an uncrewed cargo spacecraft carrying a mixture of pressurised and unpressurised cargo to the International Space Station. After a 52-day successful mission, HTV departed the ISS on 31 October 2009 after being released by the station's robotic arm. The spacecraft re-entered in the atmosphere of Earth on 1 November 2009 and disintegrated on re-entry as planned.
Kounotori 3, also known as HTV-3, was the third flight of the Japanese H-II Transfer Vehicle. It was launched on 21 July 2012 to resupply the International Space Station (ISS) aboard the H-IIB Launch Vehicle No. 3 manufactured by Mitsubishi Heavy Industries (MHI) and JAXA. Kounotori 3 arrived at the ISS on 27 July 2012, and Expedition 32 Flight Engineer and JAXA astronaut Akihiko Hoshide used the International Space Station's Canadarm2 robotic arm to install Kounotori 3, to its docking port on the Earth-facing side (nadir) of the Harmony module at 14:34 UTC.
Nanoracks LLC is a private in-space services company which builds space hardware and in-space repurposing tools. The company also facilitates experiments and launches of CubeSats to Low Earth Orbit.
WE WISH was a small commercial CubeSat which was deployed from the International Space Station (ISS) in October 2012 and which deorbited in March 2013. It was built by the Japanese technology company Meisei Electric and the Meisei Amateur Radio Club, and could transmit pictures taken by a small infrared camera via radio at 437.515 MHz. WE WISH travelled to orbit aboard Kounotori 3 (HTV-3) on 21 July 2012, along with other CubeSats including RAIKO, FITSAT-1, F-1, and TechEdSat-1.
Origins of the International Space Station covers the origins of ISS. The International Space Station programme represents a combination of three national space station projects: the Russian/Soviet Mir-2, NASA's Space Station Freedom including the Japanese Kibō laboratory, and the European Columbus space stations. Canadian robotics supplement these projects.
The Nanoracks CubeSat Deployer (NRCSD) is a device to deploy CubeSats into orbit from the International Space Station (ISS).
AESP-14 is a Brazilian 1U Cubesat developed by multiple Brazilian institutions. It was launched on 10 January 2015 aboard the SpaceX CRS-5 mission on a Falcon 9 v1.1 rocket. It was the first Brazilian Cubesat ever launched into space.
Kounotori 9 (こうのとり9号機), also known as HTV-9 was the 9th flight of the H-II Transfer Vehicle, a robotic cargo spacecraft to resupply the International Space Station (ISS). It was launched on 20 May 2020, at 17:31:00 UTC.
RemoveDEBRIS was a satellite research project intending to demonstrate various space debris removal technologies. The mission was led by the Surrey Space Centre from the University of Surrey with the satellite's platform manufactured by Surrey Satellite Technology Ltd (SSTL). Partners on the project included Airbus, ArianeGroup, Swiss Center for Electronics and Microtechnology, Inria, Innovative Solutions In Space, Surrey Space Centre, and Stellenbosch University.
UBAKUSAT was a Turkish nanosatellite that was developed by Istanbul Technical University. It was launched into space on board a Falcon-9 rocket in April 2018 and was deployed into its orbit from the International Space Station in May 2018. It was built as a technology demonstration and Earth observation satellite to provide voice communications for amateur radio stations around the world. It carried an experimental card, TAMSAT Simplesat, which allowed scientists to test its accuracy of measuring radiation from space. It was the fifth satellite to be built by students of Istanbul Technical University.
BHUTAN-1 was the first Bhutanese nanosatellite to be launched into space. The satellite was built during Kyushu Institute of Technology's Birds-2 program. The Birds program helps countries fly their first satellite. BHUTAN-1 was launched into orbit aboard the SpaceX CRS-15 mission on 29 June 2018. It was deployed from the Kibō module of the International Space Station (ISS) on 10 August 2018. The satellite had cameras to image the Earth.
Birds-2 is the second iteration of a multinational program called the Joint Global Multi-Nations Birds Satellite project, or Birds project, to help countries build their first satellite. The Japanese Kyushu Institute of Technology (KIT) supported the design and fabrication of the satellites. The satellites were launched by the Falcon 9 Full Thrust rocket as a part of the SpaceX CRS-15 mission on 29 June 2018. The satellites were released from the Kibō module of the International Space Station (ISS) in August 2018.
The Japanese Module, also known as the Kibō successor module, is a commercial space module for scientific research being studied by the Japanese space agency JAXA and private conglomerate Mitsui & Co. that will be docked to a yet-to-be-identified American commercial space station. The module will be placed in low Earth orbit and will primarily be used for biological and material physics research.