Snaphance

Last updated
Swedish snaphance guns from the mid 17th century Snaphaunce guns-Sweedish-mid17cent.jpg
Swedish snaphance guns from the mid 17th century

A snaphance or snaphaunce is a type of firearm lock in which a flint struck against a striker plate above a steel pan ignites the priming powder which fires the gun. [1] It is the mechanical progression of the wheellock firing mechanism, and along with the miquelet lock and doglock are predecessors of the flintlock mechanism.

Contents

The name is Dutch in origin but the mechanism cannot be attributed to the Netherlands with certainty.

Examples of this firearm can be found in Europe, North Africa, and the Middle East.

Design

A snaphance lock cocked and ready to fire
Snaphance Lock, External View, Cocked.png
External view, showing the cock and frizzen rotated back
Snaphance Lock, Internal View, Cocked.png
Internal view, showing the flash pan cover closed and the lateral sear engaged
The same lock, fired
Snaphance Lock, External View, Fired.png
External view, showing the cock and frizzen rotated forward
Snaphance Lock, Internal View, Fired.png
Internal view, showing the flash pan cover pushed forward to open the pan and the lateral sear disengaged
Snaphance sparking Snaphaunce sparking.gif
Snaphance sparking

Like the earlier snaplock and later flintlock, the snaphance drives flint onto steel to create a shower of sparks to ignite the priming powder in the pan, the flash partly passing through the touch hole into the barrel where it ignites the main charge (propellant).

The flint is held in a clamp at the end of a bent lever called the cock. Upon pulling the trigger, this moves forward under the pressure of a strong spring and strikes a curved plate of hardened steel (called simply the steel, or in 17th century English dialect the frizzen) to produce a shower of sparks (actually white-hot steel shavings). These fall into a flash pan holding priming powder. The flash from the pan travels through the touch hole to cause the main charge of gunpowder to explode. The steel is at the end of an arm that can be moved independently of the pan cover.

The snaphance first appeared in the late 1550s as an improvement of the earlier snaplock in one or more of the following countries: Spain, Holland, Germany, Scotland, or Sweden. [2] The main improvement was that the pan-cover opened automatically (to keep the priming dry until the exact moment of firing), as in the wheel-lock. (The snaplock had a manually operated pan cover similar to that of the matchlock. Some definitions class the snaphaunce as a sub-type of snaplock.) Also like the wheel-lock, the snaphance used a lateral sear mechanism to connect the trigger to cock. Later models had a variety of safety mechanisms to prevent accidental discharge of the gun. Without these the weapons, like any firearm, could be highly dangerous: Hakluyt's Voyages records the death of one of the men on Cavendish's circumnavigation in the 1580s due to an accidental discharge during a hurried re-embarkation on the coast of Ecuador, specifically mentioning the weapon was a snaphance. The snaphaunce has a form of safety built into its design, since the steel (frizzen) could be manually moved forward so that if the cock should be released accidentally it would not strike sparks. This led to an inherent disadvantage: in the flintlock when at half-cock and the frizzen is closed, the flint is in close proximity to the steel and can easily be adjusted to strike square to and in the center of the steel; in the snaphaunce the cock can only be at full-cock or down, where it prevents the steel from being brought back to the firing position, so the flint is more difficult to align. The development of the snaphance occurred separately but at the same time as the creation of the miquelet. [2]

Use

The snaphance was used from the mid 16th century, most commonly in pistol form as a weapon for officers and cavalry. It was used alongside the inferior wheellock in the 16th and 17th centuries, with different countries favoring different mechanisms. James Turners' Pallas Armata, written in the 1630s, noted that the snaphance (and other flintlocks) reigned supreme among cavalry in France, Britain, and the Dutch Republic, while the wheellock was still more common in the German lands: "The French use locks with half bends (snaphaunces), and so do for the most part the English and Scots; the Germans rore or wheel-locks; the Hollanders make use of both."

Fragility, complexity, and cost kept it from replacing the matchlock in the hands of infantry, though the latter issue became less prominent as technology improved. By 1645 a matchlock musket cost 10 shillings in Britain compared to 15 shillings for a flintlock musket. However, flintlocks were still much cheaper than wheellocks; in 1631 the Royal Armoury's purchase records show the going rate as 3 pounds (60 shillings) for a pair of wheellock pistols versus 2 pounds (40 shillings) for a pair of flintlock pistols. [3]

By about 1680, it was gradually superseded and was still occasionally issued to reinforcements for Portugal for the British Army in the Wars of the Spanish Succession of 1703 and in Northern Italy where it was still in use until the 1750s. In Europe, and especially France, the snaphance was replaced by the flintlock with its combined steel/pan cover starting from about 1620. In England, a hybrid mechanism called the English Lock replaced the snaphance from the same date. Both the flintlock and the English lock were cheaper and less complex than the snaphance.

The snaphance dominated the New England gun market until it fell out of favor in the middle of the 17th century. Virginia, Massachusetts, and Connecticut outlawed the outdated mechanism by the late 17th century. [4]

Name

The origin of the name snaphance is thought to come from the Dutch Snaphaan, which roughly means "pecking rooster" and relates to the shape of the mechanism and its downward-darting action (and would also explain the name "cock" for the beak-shaped mechanism which holds the flint). In German, the calque Schnapphahn moved away from the earlier definitions and has traditionally referred to a mounted highwayman, who would have been likely to use a firearm of that nature. The French chenapan also changed its meaning in the seventeenth century to define a rogue or scoundrel. During the Second Northern and Scanian Wars, a "Snapphane" was a pro-Danish Guerilla-man in Scania, which had just been annexed by Sweden, as they wanted to belong to Denmark instead.

In Swedish the word Snapphane is first recorded 1558 in a letter from King Gustav I to his son Duke John of Finland "reffvelske snaphaner" (Snapphanar from Tallinn-Reval), earlier correspondence were discussing Estonian privateers and problems created by them in Russian commerce. In the inventories of the Royal Armoury in Stockholm the term snapphanelås (snaphance lock) appears first in 1730, after the conquest of the former Danish provinces of Skåne, Halland and Blekinge in the 1670s. The local peasant warriors were then called snapphanar and their typical smallbore rifles (see picture) were described as having snapphanelås: locks or rifles used by the Snapphanar. In the earlier inventories the term used is always snapplås (snaplock).

See also

Related Research Articles

<span class="mw-page-title-main">Percussion cap</span> Ignition source in a type of firearm mechanism

The percussion cap or percussion primer, introduced in the early 1820s, is a type of single-use percussion ignition device for muzzle loader firearm locks enabling them to fire reliably in any weather condition. Its invention gave rise to the cap lock mechanism or percussion lock system which used percussion caps struck by the hammer to set off the gunpowder charge in rifles and cap and ball firearms. Any firearm using a caplock mechanism is a percussion gun. Any long gun with a cap-lock mechanism and rifled barrel is a percussion rifle. Cap and ball describes cap-lock firearms discharging a single bore-diameter spherical bullet with each shot.

A muzzleloader is any firearm in which the user loads the projectile and the propellant charge into the muzzle end of the gun. This is distinct from the modern designs of breech-loading firearms, in which user loads the ammunition into the breech end of the barrel. The term "muzzleloader" applies to both rifled and smoothbore type muzzleloaders, and may also refer to the marksman who specializes in the shooting of such firearms. The firing methods, paraphernalia and mechanism further divide both categories as do caliber.

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

<span class="mw-page-title-main">Flintlock</span> Firearm with flint-striking ignition

Flintlock is a general term for any firearm that uses a flint-striking ignition mechanism, the first of which appeared in Western Europe in the early 16th century. The term may also apply to a particular form of the mechanism itself, also known as the true flintlock, that was introduced in the early 17th century, and gradually replaced earlier firearm-ignition technologies, such as the matchlock, the wheellock, and the earlier flintlock mechanisms such as the snaplock and snaphaunce.

<span class="mw-page-title-main">Wheellock</span> Firearm action

A wheellock, wheel-lock, or wheel lock is a friction-wheel mechanism which creates a spark that causes a firearm to fire. It was the next major development in firearms technology after the matchlock and the first self-igniting firearm. Its name is from its rotating steel wheel to provide ignition. Developed in Europe around 1500, it was used alongside the matchlock and later the snaplock (1540s), the snaphance (1560s), and the flintlock.

<span class="mw-page-title-main">Flintlock mechanism</span> Ignition system for early firearms

The flintlock mechanism is a type of lock used on muskets, rifles, and pistols from the early 17th to the mid-19th century. It is commonly referred to as a "flintlock". The term is also used for the weapons themselves as a whole, and not just the lock mechanism.

<span class="mw-page-title-main">Ranged weapon</span> Any weapon that can engage targets beyond hand-to-hand distance

A ranged weapon is any weapon that can engage targets beyond hand-to-hand distance, i.e. at distances greater than the physical reach of the user holding the weapon itself. The act of using such a weapon is also known as shooting. It is sometimes also called projectile weapon or missile weapon because it typically works by launching solid projectiles ("missiles"), though technically a fluid-projector and a directed-energy weapon are also ranged weapons. In contrast, a weapon intended to be used in hand-to-hand combat is called a melee weapon.

<span class="mw-page-title-main">Miquelet lock</span> Type of firearm mechanism

Miquelet lock is a modern term used by collectors and curators for a type of firing mechanism used in muskets and pistols. It is a distinctive form of snaplock, originally as a flint-against-steel ignition form, once prevalent in the Spanish, Portuguese, and Ottoman empires, Italy, North Africa, and the Balkans from the late 16th to the mid-19th century.

<span class="mw-page-title-main">Lock (firearm)</span>

The lock of a firearm is the mechanism used to initiate firing. It is a historical term, in that it generally refers to such mechanisms used in muzzle-loading and early breech-loading firearms. Side-lock refers to the type of construction, in which the individual components of the mechanism are mounted either side of a single plate. The assembly is then mounted to the stock on the side of the firearm. In modern firearm designs, the mechanism to initiate firing is generally constructed within the frame or receiver of the firearm and is referred to as the firing or trigger mechanism.

<span class="mw-page-title-main">Snaplock</span>

A snaplock is a type of lock for firing a gun or is a gun fired by such a lock.

The flash pan or priming pan is a small receptacle for priming powder, found next to the touch hole on muzzle-loading guns. Flash pans are found on gonnes, matchlocks, wheellocks, snaplocks, snaphances, and flintlocks.

<span class="mw-page-title-main">Culverin</span> Early gun; small arm and then a cannon

A culverin was initially an ancestor of the hand-held arquebus, but later was used to describe a type of medieval and Renaissance cannon. The term is derived from the antiquated "culuering" and the French "couleuvrine" From its origin as a hand-held weapon it was adapted for use as artillery by the French in the 15th century, and for naval use by the English in the 16th century. The culverin as an artillery piece had a long smoothbore barrel with a relatively long range and flat trajectory, using solid round shot projectiles with high muzzle velocity.

<span class="mw-page-title-main">Frizzen</span>

The frizzen, historically called the "hammer" or the steel, is an "L"-shaped piece of steel hinged at the front used in flintlock firearms. The frizzen is held in one of two positions, opened or closed, by a leaf spring. When closed, it is positioned over the flash pan so as to enclose a small priming charge of black powder next to the flash hole that is drilled through the barrel into which the main charge has been loaded. When the trigger is pulled, the hammer or cock which includes a shaped piece of flint held in a set of jaws with a scrap of leather or thin piece of lead, snaps forward causing the flint to scrape downward along the frizzen's face, throwing it forward into the open position and exposing the priming powder. The flint scraping along the steel causes a shower of sparks to be thrown into the pan, thereby igniting the priming powder therein and sending flames through the touch hole, which in turn ignites the main charge of black powder in the breech of the barrel, driving the projectile out of the muzzle.

<span class="mw-page-title-main">Hammer (firearms)</span> Part of a Firearm

The hammer is a part of a firearm that is used to strike the percussion cap/primer, or a separate firing pin, to ignite the propellant and fire the projectile. It is so called due to the fact that it resembles a hammer in both form and function. The hammer itself is a metal piece that forcefully rotates about a pivot point.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">History of the firearm</span> Aspect of history

The history of firearms begins in 10th-century China, when bamboo tubes containing gunpowder and pellet projectiles were mounted on spears to make portable fire lances, operable by one person. This was later used effectively as a shock weapon in the Siege of De'an in 1132. In the 13th century, fire lance barrels were replaced with metal tubes and transformed into metal-barreled hand cannons. The technology gradually spread throughout Eurasia during the 14th century and evolved into flintlocks, blunderbusses, and other variants. The 19th and 20th centuries saw an acceleration in this evolution, with the introduction of the magazine, belt-fed weapons, metal cartridges, and the automatic firearm. Older firearms typically used black powder as a propellant, but modern firearms use smokeless powder or other propellants. Most modern firearms have rifled barrels.

<span class="mw-page-title-main">Kalthoff repeater</span> Weapon

The Kalthoff repeater was a type of repeating firearm that was designed by members of the Kalthoff family around 1630, and became the first repeating firearm to be brought into military service. At least nineteen gunsmiths are known to have made weapons following the Kalthoff design. Some early Kalthoff guns were wheellocks, but the rest were flintlocks. The capacity varied between 5 and 30 rounds, depending on the style of the magazines. A single forward and back movement of the trigger guard, which could be done in 1–2 seconds, readied the weapon for firing. The caliber of Kalthoff guns generally varied between 0.4–0.8 in (10–20 mm), though 0.3 in (7.6 mm) caliber examples also exist.

<span class="mw-page-title-main">Doglock</span>

A doglock is a type of lock for firearms that preceded the 'true' flintlock in rifles, muskets, and pistols in the 17th century. Commonly used throughout Europe in the late seventeenth century, it gained popular favor in the British and Dutch military. A doglock carbine was the principal weapon of the harquebusier, the most numerous type of cavalry in the armies of the Thirty Years' War and English Civil War era. Like the snaphance, it was largely supplanted by the flintlock.

<span class="mw-page-title-main">Moukahla</span> Musket

The Moukahla or moukalla was a type of musket widely used in North Africa, produced by many tribes, clans and nations.

In firearms and artillery, the primer is the chemical and/or device responsible for initiating the propellant combustion that will propel the projectiles out of the gun barrel.

References

  1. Godwin, Brian. "Brian Godwin on The English Snaphance". Archived from the original on 12 August 2013. Retrieved 26 November 2012.
  2. 1 2 Chapel, Charles Edward (2002). Guns of the Old West : an illustrated guide . Mineola, N.Y.: Dover Publications. p.  12. ISBN   9780486421612 . Retrieved 26 November 2012. Snaphance.
  3. Keith Dowen. "Arms and Armour of the English Civil Wars." Royal Armouries 2019. Pages 45 and 68
  4. Russell, Carl P. (2005). "Arming the American Indian". Guns on the early frontiers : from colonial times to the years of the Western fur trade. New York: Dover. p. 9. ISBN   978-0486436814.

Brian Godwin, The English Snaphance Lock, London Park Lane Arms Fair catalog, Spring 2006, and Classic Arms and Militaria Magazine, volume XVI Issue 1, page 48