Surfskating

Last updated

Surfskating, or surf skateboarding, is a form of skateboarding that replicates the experience of surfing on dry land. [1] A surfskate system is distinguished from a traditional skateboard system by the utilization of two different trucks, front and back, with specific functions and geometries that, together, yield thrust, just like a surfboard. [2]

Contents

Surfskates, or surf skateboards, were invented by surfers who wanted a way to surf on days with no waves. [3] Surfskates are often used by surfers to train for surfing. [4] An increasing number of non-surfers are drawn to surfskating because of the unique abilities and feel enabled by surfskate truck systems. [5] The sport is also gaining popularity with snowboarders. [6]

Surfskating is differentiated from carveboarding, which refers to riding a Carveboard specifically, which are no longer in production. Since Carveboards use the same trucks on front and rear, they do not generate thrust in the same way that surfskates do.

Function

Standard "traditional kingpin" (TKP) or "reverse kingpin" (RKP) skateboard or longboard trucks only turn on their kingpin axis. Skateboards and longboards also typically have the same trucks on the front and rear.

On a surfskate system, the front truck has a rotation arm that allows a normal truck to turn on an additional vertical axis, parallel to the deck. The rear truck acts as a pivot point [7] that the board rotates around, performing a similar function as the back fins on a surfboard. [8]

Surfskate systems enable pumping and carving

When riding standard TKP or RKP skateboard or longboard trucks, riders must push the ground with their feet to continue moving on a flat surface. With surfskate trucks, riders are able to pump their surfskate in the same way that surfers pump surfboards to generate speed on waves. [9] This means you can ride for long distances on a surfskate without ever touching the ground, as if you were "surfing" the streets.

With the additional axis of rotation on the front truck, surfskates are also able to turn much more sharply than standard TKP or RKP trucks. This allows riders to perform the type of tight carving maneuvers typically seen in surfing. [10]

Construction

There are many different types of surfskate systems, but they all follow the same principle of combining a rotating arm on the front truck with a stable rear truck. Typically, bushings or springs are used to enable the additional axis of rotation on a front surfskate truck. [11] One exception is the Curfboard, which swivels on hinges. [12] The first surfskate company, Carver Skateboards, released its first surfskate truck, the C7, in 1996. Since then, many other companies have released dozens of different original surfskate truck designs. These include, but are not limited to: [13]

History of surfskating

Skateboarding is rooted in surfing. It was started in the 1950s by surfers looking for a way to surf on "flat" days with no waves. These early skateboarders were called "asphalt surfers." [14]

As skateboarding evolved, it drifted away from its surfing roots and focused heavily on street skating and technical tricks.

In the mid-1990s, various attempts were made to create skateboard trucks that simulated more of a "surf-like" experience. During this time, surfer friends Neil Stratton and Greg Falk [15] in Venice Beach, California were among those in the quest to create a functional skateboard truck that felt like surfing. Among their key insights was the realization that adding more turn to the front truck must be combined with a stable rear truck, which acts as a pivot point for the radically turning front truck.

After many iterations, they finalized their "carving truck" design and launched it under the name Carver Skateboards in 1996. [16] The called their new carving truck the C1 and secured a patent on the design. Based on feedback from riders, they fine-tuned their design and called the new improved version the C7. The Carver C7, which uses a compression spring to drive the rotating arm, is largely recognized as the first official "surfskate" truck. Carver later released their CX surfskate truck, which uses bushings instead of a compression spring, is also among the most well-known and popular surfskate trucks. [17]

Since Carver launched, the sport has grown in popularity and many other companies have released many different surfskate truck designs.

The sport is most popular in well-known surfing locations. However, as more non-surfers take up the sport, it is becoming increasingly international and inclusive. Ryan Theobald VP Sales and Marketing at Landyachtz explains, "It's also well promoted by influencers to have a completely inclusive vibe. Low barriers to entry help as well, no tricks, just turning, people see that and believe they could enjoy it too." [18]

Jordi Quinto, Skate Specialist at Hydroponic agrees, saying, "Riders of all ages see it as an easier practice to master than traditional street and skatepark skating, and especially older riders and those who have been surfing for a while have embraced it quickly and passionately." [19]

Steve Douglas at Rolling Thunder Distribution (OP Skateboards) added, "From avid surfers to surfer wannabe's to older guys that just want to keep the momentum and balance going. It really reaches a broad demographic." [20]

Regarding how he has seen the surfskate audience evolve, Benoit Brecq at Flying Wheels said, "At the beginning, the market was for surfers looking to improve their surf tricks when the waves weren't good. Now, more and more people are using surfskates because the surfing sensation is really close to real surfing in water." [21]

Between 2020 and 2021, surfskating surged in popularity across the world as a result of the COVID-19 pandemic, when lockdowns made travel difficult. [22] [23] Thailand in particular experienced an explosive growth of surfskating during this time. [24]

Surfskating is also on the uprise in China. [25]

Related Research Articles

<span class="mw-page-title-main">Surfing</span> Sport of riding waves

Surfing is a surface water sport in which an individual, a surfer, uses a board to ride on the forward section, or face, of a moving wave of water, which usually carries the surfer towards the shore. Waves suitable for surfing are primarily found on ocean shores, but can also be found in standing waves in the open ocean, in lakes, in rivers in the form of a tidal bore, or in wave pools.

Boardsports are active outdoor sports that are played with some sort of board as the primary equipment. These sports take place on a variety of terrains, from paved flat-ground and snow-covered hills to water and air. Most boardsports are considered action sports or extreme sports, and thus often appeal to youth. Some board sports were marginalized in the past. However, many board sports are gaining mainstream recognition, and with this recognition, they have enjoyed wider broadcast, sponsorship and inclusion in institutional sporting events, including the Olympic Games.

<span class="mw-page-title-main">Surfboard</span> Platform board used in the sport of surfing

A surfboard is a narrow plank used in surfing. Surfboards are relatively light, but are strong enough to support an individual standing on them while riding an ocean wave. They were invented in ancient Hawaii, where they were known as papa he'e nalu in the Hawaiian language, and were usually made of wood from local trees, such as koa. They were often over 460 cm (15 ft) in length and extremely heavy. Major advances over the years include the addition of one or more fins (skegs) on the bottom rear of the board to improve directional stability, and numerous improvements in materials and shape.

<span class="mw-page-title-main">Longboard (skateboard)</span> Type of sports equipment similar to skateboard

A longboard is a type of skateboard typified by longer decks and wheelbases, larger-diameter and softer (lower-durometer) wheels, and often lower riding height compared to street skateboards, though there is wide variation in the geometry and construction of longboards. Among the earliest types of skateboards, longboards were inspired by surfing, with early longboards drawing from the design of surfboards, resembling and mimicking the motion of riding a surfboard, but adapted to riding on streets in a practice known as sidewalk surfing.

<span class="mw-page-title-main">Longboarding</span> Subdiscipline of skateboarding

Longboarding is a variation of skateboarding typified by the use of longer boards ("decks") with longer wheelbases and softer wheels. While longboards vary widely in shape and size, compared to street skateboards longboards are designed to be more stable at speed and to have more traction due to larger wheel sizes and softer wheel durometers. While standard street skateboards may typically be between 28 to 34 inches long, longboards can range anywhere from 32 to 50 inches in length. Ride characteristics of longboards generally differ from that of street skateboards due to the use of specialized longboard trucks that have different properties than those typically used with skateboards; while street skateboards use "traditional kingpin" (TKP) trucks that are optimized for tight turning radii, ollie and flip tricks, slides, grinds, and transition skating, longboards are typically paired with "reverse kingpin" (RKP) trucks that are designed for increased stability at higher speeds, more "surfy" carving characteristics, and/or greater ride comfort for commuting over longer distances.

<span class="mw-page-title-main">Mavericks, California</span> Surfing location in Northern California, United States

Mavericks is a surfing location in northern California outside Pillar Point Harbor, just north of the town of Half Moon Bay at the village of Princeton-by-the-Sea. After a strong winter storm in the northern Pacific Ocean, waves can routinely crest at over 25 ft (8 m) and top out at over 60 ft (18 m). Routinely, waves that break can be recorded on seismometers. The break is caused by an unusually shaped underwater rock formation.

<span class="mw-page-title-main">Mountainboarding</span> Action sport

Mountainboarding, also known as dirtboarding, off-road boarding, and All-Terrain Boarding (ATB), is a well-established but little-known action sport, derived from snowboarding. It could be more extreme. The sport was initially pioneered by James Stanley during a visit to the Matterhorn in the 1990s, where snow was not available. A mountainboard is made up of components including a deck, bindings, four wheels with pneumatic tires, and two steering mechanisms known as trucks. Mountainboarders, also known as riders, ride specifically designed boardercross tracks, slopestyle parks, grass hills, woodlands, gravel tracks, streets, skateparks, ski resorts, BMX courses, and mountain bike trails. It is this ability to ride such a variety of terrain that makes mountainboarding unique from other board sports.

<span class="mw-page-title-main">Skip Frye</span> American surfer

Skip Frye is an American surfer, surfboard designer and shaper, and environmental activist.

Warren Edward Bolster was an American skateboard photographer during the mid-1970s rebirth of skateboarding.

Skurfing is a towed water sport in which an individual is pulled behind a boat on a tow rope. The sport uses a skurfboard, which is a floating platform the user balances on, similar to a surfboard but typically much shorter, with two foot-straps that prevent falling off the board and three fins positioned on the bottom that make it easier to maneuver when the board is being towed. The word itself is a portmanteau of skiing and surfing. Skurfing is often considered the precursor to wakeboarding.

Pumping is a skateboarding technique used to accelerate without the rider's feet leaving the board. Pumping can be done by turning or on a transition, like a ramp or quarter pipe. When applied to longboards, it is also known as Long distance skateboard pumping or LDP. Pumping is a technique similar to pumping a surfboard.

<span class="mw-page-title-main">Skateboard</span> Wheeled wooden board used for skateboarding

A skateboard is a type of sports equipment used for skateboarding. It is usually made of a specially designed 7–8-ply maple plywood deck and has polyurethane wheels attached to the underside by a pair of skateboarding trucks.

<span class="mw-page-title-main">Electric skateboard</span> Type of skateboard powered by an electric motor

An electric skateboard is a personal transporter based on a skateboard. The speed is usually controlled by a wireless hand-held throttle remote, or rider body weight-shifting between front of the board for forward motion and rear for braking. As for the direction of travel to the right or left, it is adjusted by tilting the board to one side or the other. The classification of electric skateboards and legality of their use on roads or pavements varies between countries.

Oxbow is a brand of clothing and athletic equipment. Since its creation in 1985 in Pont-Audemer, France, Oxbow has positioned itself in the world of boardsports as an international brand. Oxbow restarted the World Longboard Championship in 1992, and sponsors athletes such as surfer Laird Hamilton and windsurfer Jason Polakow. Oxbow's Back to Powder winter event draws some of the best skiers and snowboarders in the world. The business is involved in five sports: surfing, windsurfing, kitesurfing, snowboarding, and skiing. Oxbow became an affiliate of the French group Lafuma in 2005.

<span class="mw-page-title-main">Glossary of surfing</span> Vocabulary used to describe various aspects of the sport of surfing

This glossary of surfing includes some of the extensive vocabulary used to describe various aspects of the sport of surfing as described in literature on the subject.[a][b] In some cases terms have spread to a wider cultural use. These terms were originally coined by people who were directly involved in the sport of surfing.

Carveboarding is a boardsport that takes place on hard surfaces such as roads and sidewalks. It combines elements of surfing, snowboarding, and skateboarding, providing a riding experience that resembles surfing and snowboarding.

Donald Moke Takayama was an American professional surfer and surfboard shaper. Originally a longboard surfer, Takayama won the Master's division of the United States Surfing Champions in 1971, 1972 and 1973. Hawaiian born, Takayama learned to surf at Waikiki Beach and moved to California in the mid-1950s. Takayama died of complications from heart surgery; he is survived by his wife and four daughters.

Hamboards manufactures and sells rail-to-rail Surfskates, SUPskates, Paddles and Accessories. Most Hamboards are longer, wider and sit higher off the ground than conventional skateboards and longboards. Hamboards also turn much more than conventional skateboards. The enabling technology are the patented Hamboards Surfskate Trucks (HST), featuring 30 degrees of roll, which allows these huge boards to track and pump aggressive surf-style carving maneuvers. The patented Street Sweeper SUPskate Paddle flexes significantly, allowing the user to spring themselves along with comfort.

References

  1. Ringer, Lauren (2021-11-22). "Surf Skating: Does It Work? And Is It ACTUALLY Good For your Surfing?". House of Surf. Retrieved 2023-02-08.
  2. "What are Surfskates, and why everybody loves them ★ Wake-Style.com". www.wake-style.com. Retrieved 2023-02-13.
  3. "What is a Surf Skate?". longboardlovesg. 24 December 2021. Retrieved 2023-02-09.
  4. "Surfskate — The best way to improve your surfing". Surf the Greats. Retrieved 2023-02-09.
  5. "Surf/Skate 2023 Retail Buyer's Guide". Boardsport SOURCE. Retrieved 2023-02-10.
  6. "Is surfskate useful for snowboarding? Pros and cons of using the surfskate to train snowboarding". tabularasa. 3 April 2022. Retrieved 2023-02-11.
  7. "What is a surfskate and why are so many people riding one?". Odyssey Boards. 2 June 2021. Retrieved 2023-02-09.
  8. "10 things you should know about Surfskate". THE INDIAN FACE. 2 July 2021. Retrieved 2023-02-09.
  9. "Surfskate for Beginners: The ultimate buyer's guide". Surfers Hype. Retrieved 2023-02-09.
  10. Kahuna, Big (2021-09-10). "Surfskate vs Longboard: An Obvious Choice?". Riding Boards. Retrieved 2023-02-09.
  11. "The Different Types of Surfskate Trucks and Why They Matter". Shred MFG. Retrieved 2023-02-10.
  12. "Curfboard: a closer look". Changing Angles. 2021-06-02. Retrieved 2023-02-09.
  13. "Best Skateboards For surf skate Training | OMBE". www.ombe.co. Retrieved 2023-02-09.
  14. "History of Skateboarding | skatedeluxe Blog" . Retrieved 2023-02-09.
  15. "Surf/Skate 2023 Retail Buyer's Guide". Boardsport SOURCE. Retrieved 2023-02-10.
  16. "About Us". carverskateboards.com. Retrieved 2023-02-09.
  17. "Best Surfskate [An Exhaustive Guide]". Stoked Ride Shop. Retrieved 2023-02-09.
  18. "Surf/Skate 2023 Retail Buyer's Guide". Boardsport SOURCE. Retrieved 2023-02-12.
  19. "Surf/Skate 2023 Retail Buyer's Guide". Boardsport SOURCE. Retrieved 2023-02-10.
  20. "Surfskate SS20". Boardsport SOURCE. Retrieved 2023-02-12.
  21. "Surfskate SS20". Boardsport SOURCE. Retrieved 2023-02-10.
  22. 关晓萌. "Surfing on land gains ground among youth". global.chinadaily.com.cn. Retrieved 2023-02-10.
  23. "Surfing without waves". Bangkok Post. Retrieved 2023-02-10.
  24. "Everyone is surf skating: Thai skaters explain the soaring popularity of the latest lifestyle fad". bk.asia-city.com. 2021-03-26. Retrieved 2023-02-09.
  25. "Surf skating trend makes waves in China". Dao Insights. 2022-08-15. Retrieved 2023-02-09.