Team Philips

Last updated

Team Philips
Designer(s) Adrian Thomson and Paragon Mann
BuilderGoss Challenge
Dartmouth, England
Launched29 February 2000
Racing career
Skippers Pete Goss
Specifications
TypeCatamaran

Team Philips was a catamaran sailing vessel built to try to take Pete Goss around the world in record time.

The design consisted of two thin, wave piercing hulls, each with its own sail, connected by high placed bridges between the hulls to minimise wave drag. It was built in Totnes, England to compete in The Race, a no-holds-barred drag race around the world. It was the biggest ocean racing yacht ever built, and there was enough space between the hulls to park 80 cars. Overall dimensions were 120 ft long (37 m), 70 ft wide (21 m) and 135 ft tall (41 m).

It pushed the boundaries and challenged the norms of ocean racing yachts in three main ways:

  1. 40-foot (12 m) unsupported wave-piercing bow sections.
  2. huge unstayed windsurfer-style rig.
  3. two masts mounted abeam of each other (side by side), one on each hull.

It initially ran into trouble during its trials in March 2000 due to errors in the computer modelling of the composite hull. The first 40 feet (12 m) of the port hull broke off. It was repaired with the addition of internal bracing. It then suffered from problems with the pioneering bearings that supported the massive 130-foot-tall (40 m) masts which required further repairs.

It was abandoned during a freak storm in the mid-Atlantic in December 2000. 70-knot (130 km/h) winds and 10-metre (33 ft) waves started to produce cracks in the crew's central safety pod and forced Pete Goss to send out a mayday signal. He abandoned ship with the rest of his crew, and the vessel broke up several days later.

Related Research Articles

<span class="mw-page-title-main">Multihull</span> Ship or boat with more than one hull

A multihull is a boat or ship with more than one hull, whereas a vessel with a single hull is a monohull. The most common multihulls are catamarans, and trimarans. There are other types, with four or more hulls, but such examples are very rare and tend to be specialised for particular functions.

<span class="mw-page-title-main">Sailing</span> Propulsion of a vehicle by wind power

Sailing employs the wind—acting on sails, wingsails or kites—to propel a craft on the surface of the water, on ice (iceboat) or on land over a chosen course, which is often part of a larger plan of navigation.

<span class="mw-page-title-main">Yacht</span> Recreational boat or ship

A yacht is a sailing or power vessel used for pleasure, cruising, or racing. There is no standard definition, though the term generally applies to vessels with a cabin intended for overnight use. To be termed a yacht, as opposed to a boat, such a pleasure vessel is likely to be at least 33 feet (10 m) in length and may have been judged to have good aesthetic qualities.

<span class="mw-page-title-main">Catamaran</span> Watercraft with two parallel hulls of equal size

A catamaran is a watercraft with two parallel hulls of equal size. The distance between a catamaran's hulls imparts resistance to rolling and overturning. Catamarans typically have less hull volume, smaller displacement, and shallower draft (draught) than monohulls of comparable length. The two hulls combined also often have a smaller hydrodynamic resistance than comparable monohulls, requiring less propulsive power from either sails or motors. The catamaran's wider stance on the water can reduce both heeling and wave-induced motion, as compared with a monohull, and can give reduced wakes.

<span class="mw-page-title-main">Proa</span> Type of multihull sailboat

Proas are various types of multi-hull outrigger sailboats of the Austronesian peoples. The terms were used for native Austronesian ships in European records during the Colonial era indiscriminately, and thus can confusingly refer to the double-ended single-outrigger boats of Oceania, the double-outrigger boats of Island Southeast Asia, and sometimes ships with no outriggers or sails at all.

<span class="mw-page-title-main">Small-waterplane-area twin hull</span> Ship configuration with submerged twin-hulls

A small waterplane area twin hull, better known by the acronym SWATH, is a catamaran design that minimizes hull cross section area at the sea's surface. Minimizing the ship's volume near the surface area of the sea, where wave energy is located, minimizes a vessel's response to sea state, even in high seas and at high speeds. The bulk of the displacement necessary to keep the ship afloat is located beneath the waves, where it is less affected by wave action. Wave excitation drops exponentially as depth increases, so wave action normally does not affect a submerged submarine at all. Placing the majority of a ship's displacement under the waves is similar in concept to creating a ship that rides atop twin submarines.

The Global Challenge was a round the world yacht race run by Challenge Business, the company started by Sir Chay Blyth in 1989. It was held every four years, and took a fleet of one-design steel yachts, crewed by ordinary men and women who have paid to take part, round Cape Horn and through the Southern Ocean where winds can reach 70 kn (130 km/h). The fee for the last race proposed was £28,750. It was unique in that the race took the westabout route around the world against prevailing winds and currents – often referred to as the ‘wrong way’ route.

<span class="mw-page-title-main">Hobie Cat</span> Small sailing catamaran

Hobie Cat is a company that manufactures sailing catamarans, surfboards, sailboats, kayaks, stand-up paddle boards, and pedalboards as the Hobie Cat Company. It was founded in 1961 by Hobart Alter, who originally manufactured surfboards. Its line of products has included more than twenty sailing craft, plus a variety of other watercraft.

<span class="mw-page-title-main">Canting keel</span>

A canting keel is a form of sailing ballast, suspended from a rigid canting strut beneath the boat, which can be swung to windward of a boat under sail, in order to counteract the heeling force of the sail. The canting keel must be able to pivot to either port or starboard, depending on the current tack.

A mast-aft rig is a sailboat sail-plan that uses a single mast set in the aft half of the hull. The mast supports fore-sails that may consist of a single jib, multiple staysails, or a crab claw sail. The mainsail is either small or completely absent. Mast-aft rigs are uncommon, but are found on a few custom, and production sailboats.

<span class="mw-page-title-main">Bermuda Fitted Dinghy</span>

The Bermuda Fitted Dinghy is a type of racing-dedicated sail boat used for competitions between the yacht clubs of Bermuda. Although the class has only existed for about 130 years, the boats are a continuance of a tradition of boat and ship design in Bermuda that stretches back to the earliest decades of the 17th century.

<span class="mw-page-title-main">Sailing yacht</span> Private sailing vessel with overnight accommodations

A sailing yacht, is a leisure craft that uses sails as its primary means of propulsion. A yacht may be a sail or power vessel used for pleasure, cruising, or racing. There is no standard definition, so the term applies here to sailing vessels that have a cabin with amenities that accommodate overnight use. To be termed a "yacht", as opposed to a "boat", such a vessel is likely to be at least 33 feet (10 m) in length and have been judged to have good aesthetic qualities. Sailboats that do not accommodate overnight use or are smaller than 30 feet (9.1 m) are not universally called yachts. Sailing yachts in excess of 130 feet (40 m) are generally considered to be superyachts.

<i>Cisne Branco</i>

Cisne Branco is a tall ship of the Brazilian Navy based at Rio de Janeiro, Brazil, to diplomatic operations worldwide. The name means "white swan." It is a full-rigged ship built in Amsterdam, Netherlands by Damen Shipyard. Her keel was laid on 9 November 1998, and she was christened and launched on 4 August 1999, delivered to the Brazilian Navy on 4 February 2000. The vessel was commissioned as a Brazilian naval vessel on 9 March 2000. Its sister ship is Stad Amsterdam.

The WoodPussy is a 13½’ catboat designed by Philip Rhodes. The first boats were constructed in 1945 by Palmer Scott Boat Works. These boats were wood with wooden masts. The class switched to fiberglass hulls, dacron sails and aluminum masts in the early 1960s. It is estimated that 800-850 hulls were constructed by Palmer Scott, MarScott and O'Day. The Weeks Yacht Yard in New York is now building new fiberglass WoodPussys.

MV <i>Brigitte Bardot</i> 35m wave-piercing power trimaran

MV Brigitte Bardot is a high-tech 35 m (115 ft) stabilized monohull twin diesel engine powered vessel designed by Nigel Irens. Construction of the vessel began in June 1997 and she was launched on 16 March 1998. The official naming ceremony took place on 3 April 1998 in London's West India Dock. In 2021, the vessel was sold to a private owner.

<i>Wyvern</i> (vessel)

Wyvern is a 60-foot (18 m) open sea sailing ship operated by Stavanger Maritime Museum. The ship was designed by Colin Archer on a commission from British-born Frederick Croft and was launched on 10 August 1897. She sailed under the German flag from 1909. The Norwegian newspaper editor Rolf Thommessen bought her in 1924 and renamed her Havfruen III. This name was kept by the English owners, Anne and Terrence Carr, who acquired her in 1947 and sold her to Christian-Frederick Mattner in 1970--who renamed her to the original 'Wyvern'.She was contracted for sale to a Norwegian consortium for £ 50 000 //of which £30 000 is still owed// after having been hijacked from San Antonio Ibiza.

<span class="mw-page-title-main">Dismasting</span> Loss of a sailing ships mast

Dismasting, also spelled demasting, occurs to a sailing ship when one or more of the masts responsible for hoisting the sails that propel the vessel breaks. Dismasting usually occurs as the result of high winds during a storm acting upon masts, sails, rigging, and spars. Over compression of the mast owing to tightening the rigger too much and g-forces as a consequence of wave action and the boat swinging back and forth can also result in a dismasting. Dismasting does not necessarily impair the vessel's ability to stay afloat, but rather its ability to move under sail power. Frequently, the hull of the vessel remains intact, upright and seaworthy.

<i>Alfa Romeo II</i>

Alfa Romeo II is a maxi yacht designed in 2005 by Reichel/Pugh for yachtsman Neville Crichton. First-to-finish in the 2009 Transpacific Yacht Race, she also set a new elapsed-time Transpac race record for monohulls.

<span class="mw-page-title-main">C&C 37/40</span> Sailboat class

The C&C 37/40 is a Canadian 12.05 metres (39.5 ft) LOA fibreglass monohull sailing yacht, designed in 1988 by Robert W. Ball of Cuthbertson & Cassian as a replacement for the earlier C&C 37 dating from 1981. The C&C 37/40 is a recreational keelboat of moderate displacement, intended as a cruiser/racer or oceangoing racer. The yachts have a masthead sloop rig, with a fin keel and an internally-mounted spade-type rudder. Over 110 of the 37/40 type were built before the Canadian plant closed in 1994. The design is no longer produced.

<span class="mw-page-title-main">Sampan panjang</span>

Sampan panjang was a type of Malay fast boat from the 19th century. It was used especially by the sampan-men, or "Orang Laut". Historically, they can be found in Malaysia, Singapore, and Indonesia. This type of boat was used by Malay people as racing boat and as transport boat. The sampan panjang appeared at the first quarter of the 19th century, and disappeared at the turn of that century. These boats proved to be superior than European boats in racing purposes; they were easy winners when racing against the European yachts of that time.