Tectonic burial

Last updated

Tectonic Burial is the deformation of rocks caused by extreme pressure over millions of years. [1] It often causes temperature evolutions and deep burials. [2] Tectonic burial is usually the result of continental collisions or subduction in a region. [3] An increase in burial depth leads to a weakened basin and basement but creates better preservation structure within the basement. [4]

Contents

Geologic Processes

Sedimentary Burial

Sedimentary burial diagram Burial.png
Sedimentary burial diagram

Sedimentary burial is more typical when thinking of burial processes. Sedimentary burial is the deposition of sediments on and area of interest such as a sedimentary basin, oceans, or other locations typically leading to Diagenesis.

Tectonic Burial

Tectonic Burial specifically refers to burial of material on a area of interest as a result of tectonic processes such as a Thrust fault or other processes of crustal thickening. Tectonic burial is common in orogenic systems such as mountain belts or collisional zones. This is a critical part of the rock cycle and can lead to burial metamorphism and heating.

Evidence for tectonic burial

Radiometric Dating

One way of identifying a tectonic burial event is through radiometric dating. [5] Burial events may be radiometric dated by looking at the cooling of the event and its impact on the minerals within the formation. [5]

Metamorphism

When rocks or sediments get buried they begin to increase in temperature and pressure as the mass above accumulates. Metamorphism occurs at temperatures greater than 200 °C and pressures greater than 300 MPa. [3] Burial metamorphism overlaps with diagenesis with an increase in pressure and temperature. [3] Sedimentary rocks buried at depths of a couple kilo meters will begin generating temperatures above 300 °C without differential stress. [3]

Thermochronology

Tectonic burial events can be distinguished by Thermochronology. During a tectonic burial event rocks increase in heat until they reach their Closure temperature . These closure temperatures are an indication of burial depth history and are used by thermochronogists in dating a tectonic burial event.

Vitrinite Reflectance

Sediment deposition over a basin with organic material can create a primary component of coal, Vitrinite. High temperatures and pressures associated with Tectonic burial could produce vitrinite from woody organic material thus the presence of vitrinite may be a good indicator for a tectonic burial event.

Effects

Coalification

It has been debated that burial depth may play a role into the advancement of coalification. [6] [7] Early in the 19th century it was thought to be caused purely by the pressure caused by burial, in some coal fields high ranking coal was found that made some geologists think that burial pressure increased the coalification rate. [7]

Oil

Oil can be another product of tectonic burial. Oil is created in this fashion over a series of steps starting with the deposition of carbonate sediments followed by cracking and multiple stages of filling of oil like inclusions. [8]

Pressure-Temperature-Time paths

One of the largest effects that tectonic burial has is a change in the pressure-temperature time paths, this can be identified by looking for metamorphism or by using thermochronology. [9]

Burial of greater depths have the ability to reset fission track dates. [10]

Examples

Tectonic burial in southern Apennines. [11]

In the southern Apennines fold and thrust belts, indicators record timing of exhumation of sedimentary units.

Tectonic burial in the Persian Gulf. [8]

Evidence for the timing of diagenesis and oil migration.

Tectonic burial and Coal production. [7]

Tectonic burial and its relationship to the advancement of coalification.

Related Research Articles

<span class="mw-page-title-main">Sandstone</span> Type of sedimentary rock

Sandstone is a clastic sedimentary rock composed mainly of sand-sized silicate grains. Sandstones comprise about 20–25% of all sedimentary rocks.

<span class="mw-page-title-main">Shale</span> Fine-grained, clastic sedimentary rock

Shale is a fine-grained, clastic sedimentary rock formed from mud that is a mix of flakes of clay minerals (hydrous aluminium phyllosilicates, e.g. kaolin, Al2Si2O5(OH)4) and tiny fragments (silt-sized particles) of other minerals, especially quartz and calcite. Shale is characterized by its tendency to split into thin layers (laminae) less than one centimeter in thickness. This property is called fissility. Shale is the most common sedimentary rock.

<span class="mw-page-title-main">Sedimentary rock</span> Rock formed by the deposition and subsequent cementation of material

Sedimentary rocks are types of rock that are formed by the accumulation or deposition of mineral or organic particles at Earth's surface, followed by cementation. Sedimentation is the collective name for processes that cause these particles to settle in place. The particles that form a sedimentary rock are called sediment, and may be composed of geological detritus (minerals) or biological detritus. The geological detritus originated from weathering and erosion of existing rocks, or from the solidification of molten lava blobs erupted by volcanoes. The geological detritus is transported to the place of deposition by water, wind, ice or mass movement, which are called agents of denudation. Biological detritus was formed by bodies and parts of dead aquatic organisms, as well as their fecal mass, suspended in water and slowly piling up on the floor of water bodies. Sedimentation may also occur as dissolved minerals precipitate from water solution.

<span class="mw-page-title-main">Diagenesis</span> Physico-chemical changes in sediments occurring after their deposition

Diagenesis is the process that describes physical and chemical changes in sediments first caused by water-rock interactions, microbial activity, and compaction after their deposition. Increased pressure and temperature only start to play a role as sediments become buried much deeper in the Earth's crust. In the early stages, the transformation of poorly consolidated sediments into sedimentary rock (lithification) is simply accompanied by a reduction in porosity and water expulsion, while their main mineralogical assemblages remain unaltered. As the rock is carried deeper by further deposition above, its organic content is progressively transformed into kerogens and bitumens.

<span class="mw-page-title-main">Metamorphism</span> Change of minerals in pre-existing rocks without melting into liquid magma

Metamorphism is the transformation of existing rock to rock with a different mineral composition or texture. Metamorphism takes place at temperatures in excess of 150 °C (300 °F), and often also at elevated pressure or in the presence of chemically active fluids, but the rock remains mostly solid during the transformation. Metamorphism is distinct from weathering or diagenesis, which are changes that take place at or just beneath Earth's surface.

The Nevadan orogeny occurred along the western margin of North America during the Middle Jurassic to Early Cretaceous time which is approximately from 155 Ma to 145 Ma. Throughout the duration of this orogeny there were at least two different kinds of orogenic processes occurring. During the early stages of orogenesis an "Andean type" continental magmatic arc developed due to subduction of the Farallon oceanic plate beneath the North American Plate. The latter stages of orogenesis, in contrast, saw multiple oceanic arc terranes accreted onto the western margin of North America in a "Cordilleran type" accretionary orogen. Deformation related to the accretion of these volcanic arc terranes is mostly limited to the western regions of the resulting mountain ranges and is absent from the eastern regions. In addition, the deformation experienced in these mountain ranges is mostly due to the Nevadan orogeny and not other external events such as the more recent Sevier and Laramide Orogenies. It is noted that the Klamath Mountains and the Sierra Nevada share similar stratigraphy indicating that they were both formed by the Nevadan orogeny. In comparison with other orogenic events, it appears that the Nevadan Orogeny occurred rather quickly taking only about 10 million years as compared to hundreds of millions of years for other orogenies around the world.

<span class="mw-page-title-main">Rock cycle</span> Transitional concept of geologic time

The rock cycle is a basic concept in geology that describes transitions through geologic time among the three main rock types: sedimentary, metamorphic, and igneous. Each rock type is altered when it is forced out of its equilibrium conditions. For example, an igneous rock such as basalt may break down and dissolve when exposed to the atmosphere, or melt as it is subducted under a continent. Due to the driving forces of the rock cycle, plate tectonics and the water cycle, rocks do not remain in equilibrium and change as they encounter new environments. The rock cycle explains how the three rock types are related to each other, and how processes change from one type to another over time. This cyclical aspect makes rock change a geologic cycle and, on planets containing life, a biogeochemical cycle.

<span class="mw-page-title-main">Grenville orogeny</span> Mesoproterozoic mountain-building event

The Grenville orogeny was a long-lived Mesoproterozoic mountain-building event associated with the assembly of the supercontinent Rodinia. Its record is a prominent orogenic belt which spans a significant portion of the North American continent, from Labrador to Mexico, as well as to Scotland.

<span class="mw-page-title-main">Sevier orogeny</span> Mountain-building episode in North America

The Sevier orogeny was a mountain-building event that affected western North America from northern Canada to the north to Mexico to the south.

The Lewis Overthrust is a geologic thrust fault structure of the Rocky Mountains found within the bordering national parks of Glacier in Montana, United States and Waterton Lakes in Alberta, Canada. The structure was created due to the collision of tectonic plates about 59-75 million years ago that drove a several mile thick wedge of Precambrian rock 50 mi (80 km) eastwards, causing it to overlie softer Cretaceous age rock that is 1300 to 1400 million years younger.

A river anticline is a geologic structure that is formed by the focused uplift of rock caused by high erosion rates from large rivers relative to the surrounding areas. An anticline is a fold that is concave down, whose limbs are dipping away from its axis, and whose oldest units are in the middle of the fold. These features form in a number of structural settings. In the case of river anticlines, they form due to high erosion rates, usually in orogenic settings. In a mountain building setting, like that of the Himalaya or the Andes, erosion rates are high and the river anticline's fold axis will trend parallel to a major river. When river anticlines form, they have a zone of uplift between 50-80 kilometers wide along the rivers that form them.

<span class="mw-page-title-main">Wernecke Mountains Group</span>

The Wernecke Mountains are located in the East-central Yukon Territory of Canada. They have provided important wildlife habitat for animals such as grizzly bears and caribou as well as trapping and hunting land for the indigenous people of the Yukon for many centuries. They are the northernmost expression of the North American Cordillera, a chain of mountains stretching from Alaska to southern Mexico. This area has a northern climate characterized by short summers and long winters, with average temperatures from −26 °C (−15 °F) in the winter to 22 °C (72 °F) in the summer While essentially unpopulated, this area is well known for its rich mineral deposits, including gold, silver and copper.

Provenance in geology, is the reconstruction of the origin of sediments. The Earth is a dynamic planet, and all rocks are subject to transition between the three main rock types: sedimentary, metamorphic, and igneous rocks. Rocks exposed to the surface are sooner or later broken down into sediments. Sediments are expected to be able to provide evidence of the erosional history of their parent source rocks. The purpose of provenance study is to restore the tectonic, paleo-geographic and paleo-climatic history.

In geology, the term exhumation refers to the process by which a parcel of rock, approaches Earth's surface.

<span class="mw-page-title-main">Pre-collisional Himalaya</span>

Pre-collisional Himalaya is the arrangement of the Himalayan rock units before mountain-building processes resulted in the collision of Asia and India. The collision began in the Cenozoic and it is a type locality of a continental-continental collision. The reconstruction of the initial configuration of the rock units and the relationship between them is highly controversial, and major concerns relate to the arrangements of the different rock units in three dimensions. Several models have been advanced to explain the possible arrangements and petrogenesis of the rock units.

<span class="mw-page-title-main">Pressure-temperature-time path</span>

The Pressure-Temperature-time path is a record of the pressure and temperature (P-T) conditions that a rock experienced in a metamorphic cycle from burial and heating to uplift and exhumation to the surface. Metamorphism is a dynamic process which involves the changes in minerals and textures of the pre-existing rocks (protoliths) under different P-T conditions in solid state. The changes in pressures and temperatures with time experienced by the metamorphic rocks are often investigated by petrological methods, radiometric dating techniques and thermodynamic modeling.

<span class="mw-page-title-main">Geology of Italy</span> Overview of the geology of Italy

The geology of Italy includes mountain ranges such as the Alps and the Apennines formed from the uplift of igneous and primarily marine sedimentary rocks all formed since the Paleozoic. Some active volcanoes are located in Insular Italy.

The geology of Venezuela includes ancient Precambrian igneous and metamorphic basement rocks, layered with sedimentary rocks from the Paleozoic and Mesozoic and thick geologically recent Cenozoic sediments with extensive oil and gas.

<span class="mw-page-title-main">Junggar Basin</span> Sedimentary basin in Xinjiang, China

The Junggar Basin, also known as the Dzungarian Basin or Zungarian Basin, is one of the largest sedimentary basins in Northwest China. It is located in Dzungaria in northern Xinjiang, and enclosed by the Tarbagatai Mountains of Kazakhstan in the northwest, the Altai Mountains of Mongolia in the northeast, and the Heavenly Mountains in the south. The geology of Junggar Basin mainly consists of sedimentary rocks underlain by igneous and metamorphic basement rocks. The basement of the basin was largely formed during the development of the Pangea supercontinent during complex tectonic events from Precambrian to late Paleozoic time. The basin developed as a series of foreland basins – in other words, basins developing immediately in front of growing mountain ranges – from Permian time to the Quaternary period. The basin's preserved sedimentary records show that the climate during the Mesozoic era was marked by a transition from humid to arid conditions as monsoonal climatic effects waned. The Junggar basin is rich in geological resources due to effects of volcanism and sedimentary deposition. According to Guinness World Records it is a land location remotest from open sea with great-circle distance of 2,648 km from the nearest open sea at 46°16′8″N86°40′2″E.

<span class="mw-page-title-main">Geology of Himachal Pradesh</span>

The geology of Himachal Pradesh is dominated by Precambrian rocks that were assembled and deformed during the India-Asia collision and the subsequent Himalayan orogeny. The Northern Indian State Himachal Pradesh is located in the Western Himalaya. It has a rugged terrain, with elevation ranging from 320m to 6975m. Rock materials in the region are largely from the Indian craton, and their ages range from the Paleoproterozoic to the present day. It is generally agreed that the Indian craton collided with Asia 50-60 million years ago (Ma). Rock sequences were thrust and folded immensely during the collision. The area has also been shaped by focused orographic precipitation, glaciation and rapid erosion.

References

  1. Lynch, Gregory (1996). "Tectonic burial, thrust emplacement, and extensional exhumation of the Cabot nappe in the Appalachian hinterland of Cape Breton Island, Canada". Tectonics. 15 (1): 94–105. Bibcode:1996Tecto..15...94L. doi:10.1029/95TC02289. ISSN   1944-9194.
  2. Hardebol, N. J.; Callot, J. P.; Bertotti, G.; Faure, J. L. (June 2009). "Burial and temperature evolution in thrust belt systems: Sedimentary and thrust sheet loading in the SE Canadian Cordillera". Tectonics. AGU. 28 (23): n/a. Bibcode:2009Tecto..28.3003H. doi:10.1029/2008TC002335. S2CID   16037207 . Retrieved 22 May 2012.
  3. 1 2 3 4 Nelson, Stephen (12 April 2018). "Types of Metamorphism". tulane.
  4. Lafosse, Manfred; Boutoux, Alexandre; Bellahsen, Nicolas; Le Pourhiet, Laetitia (September 2016). "Role of tectonic burial and temperature on the inversion of inherited extensional basins during collision". Geological Magazine. 153 (5–6): 811–826. Bibcode:2016GeoM..153..811L. doi: 10.1017/S0016756816000510 . ISSN   0016-7568.
  5. 1 2 Egawa, Kosuke; Lee, Yong Il (June 2011). "K-Ar dating of illites for time constraint on tectonic burial metamorphism of the Jurassic Nampo Group (West Korea)". Geosciences Journal. 15 (2): 131–135. Bibcode:2011GescJ..15..131E. doi:10.1007/s12303-011-0016-x. ISSN   1226-4806. S2CID   129306691.
  6. "Coal", Wikipedia, 2020-04-01, retrieved 2020-04-09
  7. 1 2 3 Shibaoka, M.; Bennett, A. J. R. (February 1976). "Effect of depth of burial and tectonic activity on coalification". Nature. 259 (5542): 385–386. Bibcode:1976Natur.259..385S. doi:10.1038/259385a0. ISSN   0028-0836. S2CID   4152397.
  8. 1 2 Burruss, R. C.; Cercone, K. R.; Harris, P. M. (1983-10-01). "Fluid inclusion petrography and tectonic-burial history of the Al Ali No. 2 well: Evidence for the timing of diagenesis and oil migration, northern Oman Foredeep". Geology. 11 (10): 567–570. Bibcode:1983Geo....11..567B. doi:10.1130/0091-7613(1983)11<567:FIPATH>2.0.CO;2. ISSN   0091-7613.
  9. England, P. C.; Thompson, A. B. (1984-11-01). "Pressure--Temperature--Time Paths of Regional Metamorphism I. Heat Transfer during the Evolution of Regions of Thickened Continental Crust". Journal of Petrology. 25 (4): 894–928. Bibcode:1984JPet...25..894E. doi:10.1093/petrology/25.4.894. hdl: 20.500.11850/422845 . ISSN   0022-3530.
  10. Tinker, Justine; de Wit, Maarten; Brown, Roderick (July 2008). "Mesozoic exhumation of the southern Cape, South Africa, quantified using apatite fission track thermochronology". Tectonophysics. 455 (1–4): 77–93. Bibcode:2008Tectp.455...77T. doi:10.1016/j.tecto.2007.10.009.
  11. Mazzoli, S.; D'Errico, M.; Aldega, L.; Corrado, S.; Invernizzi, C.; Shiner, P.; Zattin, M. (2008-03-01). "Tectonic burial and "young" (". Geology. 36 (3): 243–246. doi:10.1130/G24344A.1. ISSN   0091-7613.