USS Meredith (DD-165)

Last updated
USS Meredith (DD-165) at Boston, Massachusetts (USA), on 4 February 1919 (NH 50021).jpg
History
US flag 48 stars.svgUnited States
Namesake Jonathan Meredith
Builder Fore River Shipbuilding Company, Quincy, Massachusetts
Laid down26 June 1918
Launched22 September 1918
Commissioned29 January 1919
Decommissioned28 June 1922
Stricken7 January 1936
FateSold for scrapping 29 September 1936
General characteristics
Class and type Wickes-class destroyer
Displacement
  • 1,202–1,208 long tons (1,221–1,227 t) (standard)
  • 1,295–1,322 long tons (1,316–1,343 t) (deep load)
Length314 ft 4 in (95.8 m)
Beam30 ft 11 in (9.42 m)
Draught9 ft 10 in (3.0 m)
Installed power
Propulsion2 shafts, 2 steam turbines
Speed35 knots (65 km/h; 40 mph) (design)
Range2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph) (design)
Complement6 officers, 108 enlisted men
Armament

USS Meredith (DD-165) was a Wickes-class destroyer built for the United States Navy during World War I. She was the first destroyer in the United States Navy that named for a marine.

Contents

Description

The Wickes class was an improved and faster version of the preceding Caldwell-class. Two different designs were prepared to the same specification that mainly differed in the turbines and boilers used. The ships built to the Bethlehem Steel design, built in the Fore River and Union Iron Works shipyards, mostly used Yarrow boilers that deteriorated badly during service and were mostly scrapped during the 1930s. [1] The ships displaced 1,202–1,208 long tons (1,221–1,227 t) at standard load and 1,295–1,322 long tons (1,316–1,343 t) at deep load. They had an overall length of 314 feet 4 inches (95.8 m), a beam of 30 feet 11 inches (9.4 m) and a draught of 9 feet 10 inches (3.0 m). They had a crew of 6 officers and 108 enlisted men. [2]

Performance differed radically between the ships of the class, often due to poor workmanship. The Wickes class was powered by two steam turbines, each driving one propeller shaft, using steam provided by four water-tube boilers. The turbines were designed to produce a total of 27,000 shaft horsepower (20,000 kW) intended to reach a speed of 35 knots (65 km/h; 40 mph). The ships carried 225 long tons (229 t) of fuel oil which was intended gave them a range of 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph). [3]

The ships were armed with four 4-inch (102 mm) guns in single mounts and were fitted with two 1-pounder guns for anti-aircraft defense. Their primary weapon, though, was their torpedo battery of a dozen 21 inch (533 mm) torpedo tubes in four triple mounts. In many ships a shortage of 1-pounders caused them to be replaced by 3-inch (76 mm) anti-aircraft (AA) guns. [1] They also carried a pair of depth charge rails. A "Y-gun" depth charge thrower was added to many ships. [4]

Construction and career

Meredith, named for Jonathan Meredith, was laid down 26 June 1918 by Fore River Shipbuilding Company, Quincy, Massachusetts; launched 22 September 1918; sponsored by Mrs. William F. Meredith, wife of the great-grandnephew of Sergeant Meredith; and commissioned at Boston 29 January 1919, Commander H. H. Michaels in command. Assigned to Destroyer Force, Atlantic Fleet, Meredith proceeded to Newport, Rhode Island, for torpedoes and 18 February began a shakedown cruise to Cuba. However, she received orders 22 February to join five other destroyers as escort to George Washington, returning President Woodrow Wilson from France to Boston. On 26 February, she resumed her shakedown.

Meredith departed New York 1 May for Trepassey Bay, Newfoundland, to serve as a guide post for the first transoceanic flight, as Navy Curtis flying boats spanned the Atlantic from Long Island to Plymouth, England. Returning to Boston 22 May, Meredith cruised the east and gulf coasts with Destroyer Flotilla 2 until November, then served out of Newport for training, particularly target practice, until November, when she went into repair at Norfolk.

Rejoining her division at Charleston, South Carolina, 26 January 1922, she participated in maneuvers until 5 April when she went into Philadelphia Navy Yard for inactivation. Decommissioned 28 June 1922, Meredith remained at Philadelphia until, in accordance with the London Naval Treaty, she was sold for scrapping 29 September 1936.

Notes

  1. 1 2 Gardiner & Gray, p. 124
  2. Friedman, pp. 401–03
  3. Friedman, pp. 39–42, 401–03
  4. Friedman, p. 45

Related Research Articles

USS <i>Murray</i> (DD-97) Wickes-class destroyer

USS Murray (DD-97) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Kimberly</i> (DD-80) Wickes-class destroyer

USS Kimberly (DD-80) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Dyer</i> (DD-84) Wickes-class destroyer

USS Dyer (DD-84) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>McKee</i> (DD-87) Wickes-class destroyer

USS McKee (DD-87) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Bell</i> (DD-95) Wickes-class destroyer

USS Bell (DD-95) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Mugford</i> (DD-105) Wickes-class destroyer

USS Mugford (DD-105) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Hazelwood</i> (DD-107) Wickes-class destroyer

USS Hazelwood (DD-107) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Champlin</i> (DD-104) Wickes-class destroyer

USS Champlin (DD-104) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Hart</i> (DD-110) Wickes-class destroyer

USS Hart (DD-110) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Ingraham</i> (DD-111) Wickes-class destroyer

USS Ingraham (DD-111) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Ludlow</i> (DD-112) Wickes-class destroyer

USS Ludlow (DD-112) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>DeLong</i> (DD-129) Wickes-class destroyer

USS DeLong (DD-129) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Bush</i> (DD-166) Wickes-class destroyer

USS Bush (DD-166) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Burns</i> (DD-171) Wickes-class destroyer

USS Burns (DD-171) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Anthony</i> (DD-172) Wickes-class destroyer

USS Anthony (DD-172) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>Sproston</i> (DD-173) Wickes-class destroyer of the United States Navy

USS Sproston (DD-173) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>OBannon</i> (DD-177) Wickes-class destroyer

USS O'Bannon (DD-177) was a Wickes-class destroyer built for the United States Navy during World War I.

USS <i>McCawley</i> (DD-276) Clemson-class destroyer

USS McCawley (DD-276) was a Clemson-class destroyer built for the United States Navy during World War I. She was armed with 4 × 4 inch and 2 × 1 pounder guns. She was commissioned on 22 September 1919, served with the Pacific Fleet for 3 years and was laid up on 7 June 1922. McCawley was recommissioned on 27 September 1923, again serving in the Pacific, and decommissioned in 1930 before being sold for scrap.

USS <i>Preston</i> (DD-327) Clemson-class destroyer

USS Preston (DD-327) was a Clemson-class destroyer built for the United States Navy during World War I.

USS <i>Lamson</i> (DD-328) Clemson-class destroyer

USS Lamson (DD-328) was a Clemson-class destroyer built for the United States Navy during World War I.

References