Waitangi crown

Last updated

Waitangi crown
New Zealand
Value5/— (5 shillings, or ¼ £NZ)
Mass28.27 g
Diameter38.61 mm
EdgeMilled
ShapeRound
Composition50% Ag
Years of minting1935
Mintage1,128
(including 468 proofs)
Obverse
1935 New Zealand Crown, Obverse, Proof.png
DesignCrowned bust of George V
Designer Percy Metcalfe
Reverse
1935 New Zealand Crown, Reverse, Proof.png
DesignHandshake between Tāmati Wāka Nene and William Hobson
Designer Percy Metcalfe

The Waitangi crown is a commemorative crown coin struck in 1935 by the British Royal Mint for the Dominion of New Zealand to commemorate the 1840 signing of the Treaty of Waitangi, often seen as New Zealand's founding constitutional document. It was the first five-shilling piece minted of the New Zealand pound and the nation's first coin minted primarily for collectors. Following the rejection of designs by James Berry and George Kruger Gray, Royal Mint designer Percy Metcalfe (who had also designed the bust of George V on the coin's obverse) was commissioned to design the reverse. Design disagreements plagued the production of the crown, and only an extremely small mintage of 1,128 (including 468 proofs) was struck and distributed to collectors. Released to muted media coverage and a general lack of interest in coin collecting during the economic aftermath of the Great Depression, the coin has become heavily sought by collectors of New Zealand coinage. Regularly selling for thousands of dollars, one pattern issue of the coin auctioned at over $70,000 USD, becoming the most expensive New Zealand coin ever sold.

Contents

Background

Chief Tamati Waka Nene, signatory of the Treaty of Waitangi Tamati Waka Nene, by Gottfried Lindauer.jpg
Chief Tāmati Wāka Nene, signatory of the Treaty of Waitangi

The Treaty of Waitangi is an 1840 treaty signed at the Bay of Islands between various Māori chiefs and British representative William Hobson. Succeeding New Zealand's earlier Declaration of Independence, the treaty established the sovereignty of the Crown over New Zealand as a portion of New South Wales alongside the recognition of autonomy and certain land rights for Māori. [1] The treaty, although not directly enforceable, would become a constitutional document for New Zealand and the relationship between Māori and Pākehā . [2]

While various foreign silver coinage was used in its initial period of colonisation, British silver coins became dominant following the confirmation of the pound sterling as the sole legal tender in 1858, alongside various locally issued copper tokens. [3] Although never a legal tender, the introduction of the Australian pound led to the occasional circulation of Australian coinage, accelerated by the Great Depression. By 1931, an estimated 30%-40% of circulating coins in New Zealand were Australian. The devaluation of the New Zealand pound relative to the pound sterling led to mass currency smuggling and coin shortages. [4] The Coinage Act, 1933, allowed the issue of independent coinage of the New Zealand pound. The act set out weight and purity specifications for six denominations of silver coinage, requiring all coinage to be produced at 50% silver by weight. [5] Although the crown was among the denominations listed in the act, the Royal Mint minted only the five smaller denominations for 1933 and 1934. No design was proposed for a crown denomination during the initial selection process. Any future crown issue were defined as a coin with a diameter of 1.525 inches, and a weight of 28.27 grams. [6] Like other New Zealand silver coinage, the rim of the coin was milled. [7]

All obverse designs in the series used a crowned bust portrait of George V initially designed by Percy Metcalfe for use on the Southern Rhodesian pound. This new portrait was adapted from an older portrait designed by Bertram Mackennal, featured on other British colonial coinage. [8]

Inception

Finance Minister Gordon Coates oversaw New Zealand's coinage design over the 1930s. Gordon Coates, 1926.jpg
Finance Minister Gordon Coates oversaw New Zealand's coinage design over the 1930s.

The New Zealand Numismatic Society served a significant role in the designs of the 1933 coinage series, with several members of the society placed on the Coinage Committee organised by Gordon Coates, organised to wrestle control over the designs from the Royal Mint Advisory Committee and Deputy Master Robert Johnson. [8] Royal Mint artist George Kruger Gray worked off Coinage Committee proposals during the later stages of the design process. [9] Allan Sutherland, honorary secretary of the Society and its representative to the Coinage Committee, first proposed a commemorative crown issue to Secretary to the Treasury Alexander Dallas Park in October 1933, during the final stages of the production of the initial issue of coinage. Sutherland cited precedence in the commemorative crown issues of the British pound alongside potential government profit. He proposed a mintage of at least 10,000 collectors' sets (through which the coin would be exclusively available), due to increased collector demand for a newly introduced coinage such as the New Zealand pound. [10]

The government was receptive to the proposal, and informed the Numismatic Society in January 1934, of their intention to produce such a coin to commemorate the Treaty of Waitangi. Allan Sutherland and Society president John Rankine Brown disapproved of the choice of subject matter, believing the upcoming 1940 centenary of the treaty more appropriate for such commemoration. [9] Finance Minister Gordon Coates publicly announced the coin in the Auckland Star on February 7, following the first official Waitangi Day celebrations. This announcement described an earlier version of the design, featuring several missionaries (including Reverend Henry Williams) alongside Nene and Hobson. Incorrectly stating it was to be designed by Kruger Gray, local artist James Berry had been commissioned to create the initial design. [11] [10]

Design

Model by Kruger Gray off a sketch by Berry, featuring the misspelling "Witangi" New Zealand Crown Design, Kruger Gray, 1933.png
Model by Kruger Gray off a sketch by Berry, featuring the misspelling "Witangi"

Berry's sketches were commissioned as blueprints for designers at the Royal Mint to work upon. A bas-relief on the base of the Wellington Queen Victoria monument, later featured on the reverse of the ten-shilling banknote, was used as inspiration for one of the designs, with Sutherland suggesting this would allow for the display of a number of figures without overcrowding the design. Another design by Berry was later modeled in plaster by Kruger Gray, showing a handshake between Hobson and Wāka Nene, with a misspelled "‘Witangi" above the motif. These designs were disliked by the Royal Mint and dismissed. [10]

On recommendation by Sir Goscombe John, Percy Metcalfe was eventually tasked to model the coin. Metcalfe had previously designed a series of rejected models for the 1933 issue. [8] In July 1934, six weeks after Berry's design was rejected, Metcalfe presented photographs of another model to a receptive Royal Mint. This design was possibly inspired by James Berry's work, who had previously mentioned an alternate design featuring the two figures standing beneath a crown. Another inspiration was a relief by 18th-century British sculptor John Flaxman, Mercury Uniting the Hands of Britain and France. The design featured a cloaked Wāka Nene, wearing and holding a taiaha , shaking hands with William Hobson beneath a royal crown. Unlike later designs, Nene lacks facial tattoos in the initial model. Metcalfe and Robert Johnson were relatively unfamiliar with the source material. Johnson was initially unaware if Captain Hobson should be depicted as bearded or clean-shaven. Despite production timelines stretching into late 1934, the model was dated 1933 in line with the other coins of the initial series. [10]

Some small suggestions, mainly regarding Hobson's uniform, were offered to Metcalfe by the Royal Mint, but work on the design was halted by Gordon Coates in early September 1934. In November, Coates alerted the Royal Mint of issues taken with the modelling of Nene's limbs and clothing. He requested the refinement of the chief's limbs into a less rigid position, regarding them as rigid and poorly-shaped; he additionally suggested that the crown motif be shrunk down and that Nene's cloak be replaced with a topless outfit featuring a piupiu . Coates described the figures' faces as "neither [...] bear any resemblance to personalities intended to be depicted." [10]

A relief by John Flaxman inspired the posing of the Waitangi crown Mercury Joining the Hands of Britain and France, 1787-1790, Wedgwood Pottery, Burslem, solid blue jasper on white relief with wood and gilt frame - Art Institute of Chicago - DSC09819.JPG
A relief by John Flaxman inspired the posing of the Waitangi crown

Unaware of Coates' issues with the coin, Metcalfe continued work on the design. His second model, dated 1934, resolved several of the issues, replacing Nene's cloak with the piupiu, refining his limbs, and adjusting the rendering of Hobson's trousers. Later alerted of Coates' proposals, Metcalfe was frustrated, stating that he would only decrease the size of the crown if forced to. On November 28, Coates sent a second telegram, describing Nene's limbs and hands as un-Māori. A frustrated Robert Johnson replied to another member of the Coinage Committee "I have no idea […] in what way the limbs and size of Maori hands differ from those of ordinary human beings." [10]

Metcalfe, being scheduled to visit Iraq to model King Ghazi's image for local coinage, hurried over the following few weeks a remodel of the coin. Conceding to Coates' demand for a smaller crown, he further altered Nene's limbs and garb. This redesign was well-received by the New Zealand-based committee, and by May 1935 pattern strikes of the coins were produced. Coates reviewed the coinage but was still disappointed by the figures' legs and requested revisions. In July 1935, Metcalfe completed the final revision of the coin, which was approved by Coates. Chief Nene's piupiu was raised to end at his knees, his legs were remodeled, and the crown was increased in size as a compromise between earlier revisions. Metcalfe, visiting the Mint production line in August 1935, expressed dislike of the final design. [10] The crown, like the later Centennial half-crown, was struck on silver sourced from the Martha Mine in Waihi. [12]

Release

The Waitangi crown was released to collectors in three formats: as an uncirculated coin, as a proof coin, and as part of a proof set of all 1935 coinage. In total, 1,128 crowns were produced, including 468 proofs. While the majority were exported to New Zealand, the New Zealand High Commission sold some to collectors in London. The first order of single crown pieces was shipped to New Zealand within unsecured mint bags, resulting in scratching and bag marks on many of the coins. Complaints by the High Commission were dismissed by the Royal Mint, claiming that they had not been informed the crowns were intended for collectors. [13]

I was astounded to find the Crowns were made up in Parcels of 20 pieces without even a piece of paper in-between each Coin to keep them from rubbing together.. These coins were made especially for collectors’ use and were proofed for that purpose and an extra charge of 50% was made. I have gone carefully through the 200 I have and cannot find one piece an advanced collector would with pleasure put into his cabinet.

H.G. Williams, proprietor of the New Zealand Coin Exchange, in a letter to Treasury Secretary A.D. Park, February 7th, 1936 [10]

The crowns were sold for seven shillings and six pence in New Zealand. Proof sets were sold for eighteen shillings and six pence in cardboard boxes, or for twenty-five shillings in leather cases. Such prices were high during the waning years of the Great Depression, and numismatics remained a relatively niche hobby in New Zealand during the period. [13] Only a single newspaper article mentioned the coin's release. There was a general apathy and lack of public interest towards the coin, contrasting much greater public demand in 1940 during the release of the Centennial half-crown. [10]

Legacy

Demand and pricing for the Waitangi crown slowly rose in the decades following the coin's release. By 1960, an example was estimated to be worth only NZ£30, although this was predicted to rise in the future. [14] The coins regularly sell for thousands of dollars, greatly increasing in uncirculated condition. [15] A Waitangi pattern featuring the smaller crown design, graded MS64 by NGC, [16] sold for US$72,000 in a 2021 Heritage auction, becoming the most expensive New Zealand coin. [17] The other known example of this pattern design is held by the Reserve Bank of New Zealand. [10]

Related Research Articles

<span class="mw-page-title-main">Coins of the pound sterling</span> British current and historic coinage

The standard circulating coinage of the United Kingdom, British Crown Dependencies and British Overseas Territories is denominated in pennies and pounds sterling, and ranges in value from one penny sterling to two pounds. Since decimalisation, on 15 February 1971, the pound has been divided into 100 (new) pence. Before decimalisation, twelve pence made a shilling, and twenty shillings made a pound.

<span class="mw-page-title-main">Five pounds (gold coin)</span> Gold five pound coin

The five pound British gold coin, or quintuple sovereign, has a nominal value of five pounds sterling. It has been struck intermittently since 1820, though as a circulation coin only in 1887, 1893 and 1902. Through most of its history, it has depicted, on its reverse, Benedetto Pistrucci's portrayal of St George and the Dragon, which has traditionally been used on the sovereign, or one-pound gold coin.

<span class="mw-page-title-main">Crown (British coin)</span> British coin introduced in 1707

The British crown was a denomination of sterling coinage worth 1⁄4 of one pound, or 5 shillings, or 60 (old) pence. The crown was first issued during the reign of Edward VI, as part of the coinage of the Kingdom of England.

<span class="mw-page-title-main">Half sovereign</span> British gold coin

The half sovereign is a British gold coin denominated at one-half of a pound sterling. First issued in its present form in 1817, it has been struck by the Royal Mint in most years since 1980 as a collector's and bullion piece.

There have been three sets of coins in Ireland since independence. In all three, the coin showed a Celtic harp on the obverse. The pre-decimal coins of the Irish pound had realistic animals on the reverse; the decimal coins retained some of these but featured ornamental birds on the lower denominations; and the euro coins used the common design of the euro currencies. The pre-decimal and original decimal coins were of the same dimensions as the same-denomination British coins, as the Irish pound was in currency union with the British pound sterling. British coins were widely accepted in Ireland, and conversely to a lesser extent. In 1979 Ireland joined the Exchange Rate Mechanism and the Irish pound left parity with sterling; coin designs introduced after this differed between the two countries.

Percy Metcalfe, CVO, RDI, was an English artist, sculptor and designer. He is recognised mostly for his coin designs and his contribution to the Ashtead Pottery Collection.

The coins of the South African pound were part of the physical form of South Africa's historical currency, the South African pound. Prior to the Union of 1910, various authorities issued their own pounds, some as independent entities. After the Union but before 1923, coins in circulation were mostly British, but the coins of Paul Kruger's South African Republic remained in circulation. In 1923, South Africa began to issue its own coins, adopting coins that were identical in size and value to those used in Great Britain: 12 pence (12d) = 1 shilling (1s), and 20s = 1 pound (£1). On 14 February 1961, the Union of South Africa adopted a decimal currency, replacing the pound with the Rand.

<span class="mw-page-title-main">Florin (New Zealand coin)</span> Coin of the New Zealand pound from 1933 to 1965

The florin is a coin issued for the New Zealand pound from 1933 to 1965, equal to two shillings or twenty-four pence. The coin features a kiwi on the reverse and the reigning monarch on the obverse. It was introduced in 1933 as part of the first issue of New Zealand pound coinage, due to shortages of British silver coins resulting from the devaluation of local currency relative to the pound sterling. A lengthy design process was further protracted due to differing proposed design motifs between the Royal Mint, supporting a reverse design featuring heraldic ships, and the Gordon Coates–appointed Coinage Committee's proposed kiwi design. This disagreement led to almost a dozen proposed designs and revisions before the finalised issue entered circulation in February 1934. Initially struck in silver by the Royal Mint to replace the previous imperial florin, it was struck in cupronickel from 1947 due to rising precious metal prices. While proposed as the base of a decimalised New Zealand coinage since the 1930s, the florin was ultimately replaced in 1967 by the coinage of the New Zealand dollar.

<span class="mw-page-title-main">Shilling (Australian)</span>

The shilling, informally called a "bob", was a type of silver coinage issued by the Commonwealth of Australia, that circulated prior to the decimalisation of Australian coinage. The Australian shilling was derived from the British pre-decimal sterling pound system and was first issued following the passing of the Australian Coinage Act 1909, which established Australia's first formal currency system. The shilling was issued as part of Australia's silver coinage, which included the two-shilling (florin), the sixpence and the threepence. The shilling was minted from 1910 until 1963. During this period there was one significant modification to the design of the Australian shilling, the change in its reverse design, which occurred in 1938 when the design was altered from the Australian coat of arms (1910–1936) to the visage of a Merino ram's head (1938–1963).

<span class="mw-page-title-main">Shilling (British coin)</span> Former official unit of currency of the United Kingdom and other territories

The British shilling, abbreviated "1s" or "1/-", was a unit of currency and a denomination of sterling coinage worth 1⁄20 of one pound, or twelve pence. It was first minted in the reign of Henry VII as the testoon, and became known as the shilling, from the Old English scilling, sometime in the mid-16th century. It circulated until 1990. The word bob was sometimes used for a monetary value of several shillings, e.g. "ten-bob note". Following decimalisation on 15 February 1971 the coin had a value of five new pence, and a new coin of the same value but labelled as "five new pence" or "five pence" was minted with the same size as the shilling until 1990, after which the shilling no longer remained legal tender. It was made from silver from its introduction in or around 1503 until 1946, and thereafter in cupronickel.

<span class="mw-page-title-main">Quarter sovereign</span> British gold bullion and collectors coin

The quarter sovereign is a British gold bullion and collector's coin, issued by the Royal Mint since 2009. The smallest in the sovereign range, it has a face value of 25 pence.

<span class="mw-page-title-main">Halfpenny (New Zealand coin)</span> Former denomination of New Zealand currency

The halfpenny was first issued in New Zealand in 1940, seven years after the first introduction of a domestic pound coinage. The coin's issuing was scheduled to align with the centennial of the Treaty of Waitangi and the New Zealand centennial, alongside the penny and centennial half-crown. Designed by Leonard Cornwall Mitchell after winning a government-sponsored design competition, the halfpenny features the head of the reigning monarch on the obverse, with a hei-tiki pedant ornamented with simplified kowhaiwhai woodcarvings on the reverse. The smallest of all denominations of the New Zealand pound, the copper coin was worth 1/480th of a pound, or 1/120th of a crown, the largest coinage denomination. It was discontinued alongside all other New Zealand currency following decimalisation in 1967.

<span class="mw-page-title-main">Coins of the New Zealand pound</span> Former New Zealand coinage

The first coinage of the New Zealand pound was introduced in 1933 in response to large-scale smuggling of prior British imperial coinage after devaluation of New Zealand exchange rates relative to the pound sterling and large influxes of other foreign coinage into circulation. The Coinage Act, 1933 outlined the weights and compositions of various denominations, out of which five silver issues entered circulation over the following year, after lengthy disagreement between rival coinage design committees. The copper penny and halfpenny entered circulation in 1940, corresponding to anniversary of the New Zealand centennial. An eighth denomination of coin, the five-shilling piece or crown, was produced solely through three commemorative issues. The first issue, the Waitangi crown, was produced in extremely limited quantities and sold to collectors. Later commemorative crown issues in 1949 and 1953 were produced for circulation.

<span class="mw-page-title-main">Penny (New Zealand pre-decimal coin)</span> New Zealand coin

The New Zealand penny is a large bronze coin issued from 1939 to 1965. Introduced seven years after the larger denominations of New Zealand pound coinage, the coin's issuing was scheduled to align with the centennial of the Treaty of Waitangi and the New Zealand centennial, alongside the halfpenny and centennial half-crown. Featuring the standard portrait of the ruling monarch on the obverse, the reverse features a tūī bird perched atop a kōwhai branch.

<span class="mw-page-title-main">Shilling (New Zealand coin)</span> Silver or cupronickel coin minted 1933–1965

The New Zealand shilling was first issued in 1933 alongside four other denominations of New Zealand pound coinage, introduced due to shortages of comparable British silver coinage following the devaluation of the New Zealand pound relative to the pound sterling. Roughly 24 mm in diameter, it is slightly larger than the British coin it replaced. Worth twelve pence, the denomination was equal to half a florin, two sixpence, or two-fifths of a half-crown.

<span class="mw-page-title-main">Threepence (New Zealand coin)</span> New Zealand coin

The New Zealand threepence is a coin of the New Zealand pound issued from 1933 to 1965. Equal to three pence, the coin was the smallest in size of all New Zealand pound coinage, and the smallest in denomination of the initial 1933 issue of New Zealand pound coinage, produced due to shortages of British silver coins resulting from the devaluation of local currency relative to the pound sterling. British artist George Kruger Gray designed the coin's reverse design after an earlier pattern design featuring a hei-tiki was rejected by a coinage design committee organised by Gordon Coates. It features two crossed patu below the label "3d". Initially struck in silver by the Royal Mint, it was struck in cupronickel from 1947 onward due to rising precious metal prices. Following decimalisation in 1967, the threepence was replaced by the coinage of the New Zealand dollar.

<span class="mw-page-title-main">Sixpence (New Zealand coin)</span> Former denomination of the New Zealand pound

The New Zealand sixpence is a coin of the New Zealand pound issued from 1933 to 1965. Equal to twice a threepence or half a shilling, the sixpence was one of five denominations of silver coins introduced in the initial issue of New Zealand coinage in 1933. Early designs for the coin featuring spears and silver ferns were rejected by design committees in Britain and New Zealand. The coin's final reverse, designed by George Kruger Gray, features a female huia, an extinct New Zealand bird, perched atop a branch. Issued in 50% silver until a postwar rise in silver prices triggered a shift to cupronickel in 1947, the coin was minted with relative consistency until 1965, when it was discontinued following decimalisation and the adoption of the New Zealand dollar.

<span class="mw-page-title-main">Half-crown (New Zealand coin)</span> Former denomination of the New Zealand pound

The half-crown is the largest of five denominations of New Zealand pound coinage first issued in 1933. Introduced due to shortages of comparable British silver coinage following the devaluation of the New Zealand pound relative to the pound sterling, the coin measures roughly 32 mm (1.3 in) in diameter. It was equal to thirty pence, two and a half shillings, or an eighth of a pound.

<span class="mw-page-title-main">Centennial half-crown</span> Commemorative coin of New Zealand

The Centennial half-crown is a commemorative coin of the New Zealand half-crown released in 1940 to coincide with the hundredth anniversary of the Treaty of Waitangi. Designed by New Zealand artist Leonard Cornwall Mitchell, the coin features a Māori woman surrounded by both traditional and modern architecture. Although a relatively large number, over a hundred thousand, were issued, the coin was obtainable at face value and quickly disappeared from circulation.

<span class="mw-page-title-main">1949 New Zealand crown</span> Commemorative coin of the New Zealand pound

A commemorative crown coin of the New Zealand pound was produced for a planned visit by King George VI in 1949. Having first visited the country in 1927 in his duties as the Duke of York, proposals for a visit by the monarch to New Zealand in 1940 were postponed by the outbreak of World War II. A 1949 tour by the king and queen to Australia and New Zealand was announced in early 1948, the first visit of a reigning monarch to the dominion.

References

  1. ↑ King 2003, pp. 151–167.
  2. ↑ "Te Tiriti o Waitangi – Treaty of Waitangi". New Zealand Ministry of Justice. 27 March 2023.
  3. ↑ Matthews 2003, pp. 40–49.
  4. ↑ Hargreaves 1972, pp. 141–160.
  5. ↑ "An act to make Provision with respect to Currency, Coinage, and Legal Tender in New Zealand". Coinage Act of 1933. New Zealand Parliament.
  6. ↑ Familton & McLintock 1966.
  7. ↑ "Proof Coin - Crown (5 Shillings), New Zealand, 1935". Museums Victoria. Retrieved 9 January 2024.
  8. 1 2 3 Stocker 2005, pp. 141–160.
  9. 1 2 Johnson, Robert A. (1934). Sixty-Fourth Annual Report of the Deputy Master and Comptroller of the Royal Mint – 1933 (Report). London: His Majesty's Stationery Office. pp. 6–8.
  10. 1 2 3 4 5 6 7 8 9 10 Stocker 2010, pp. 176–188.
  11. ↑ "Waitangi Emblem. New Five-Shilling Piece". Auckland Star . 7 February 1934. p. 9.
  12. ↑ "Minting of Crowns". Wanganui Chronicle . 11 October 1948. p. 4. Retrieved 14 January 2024.
  13. 1 2 Humble 1992, pp. 13–17.
  14. ↑ N.Z. Waitangi Crown 1935 1960, pp. 291–292.
  15. ↑ Cuhaj 2014, p. 1633.
  16. ↑ "New Zealand: George V silver Pattern "Waitangi" Crown 1935 MS64 NGC". Heritage Auctions. 26 March 2021.
  17. ↑ Howie, Cherie (27 March 2021). "Auction house's record sale for 85-year-old Kiwi coin". New Zealand Herald .

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.