Westinghouse Atom Smasher

Last updated
Westinghouse Atom Smasher
WestinghouseAtomSmasher.jpg
The Atom Smasher on May 9, 2010, before the 2015 demolition
Westinghouse Atom Smasher
General information
AddressF Avenue & West
Town or city Forest Hills, Pennsylvania
Coordinates 40°24′39″N79°50′35″W / 40.4108661°N 79.8430295°W / 40.4108661; -79.8430295
Opened1937
Closed1958
DemolishedJanuary 20, 2015
DesignatedAugust 28, 2010

The Westinghouse Atom Smasher was a 5 million volt Van de Graaff electrostatic nuclear accelerator operated by the Westinghouse Electric Corporation at their Research Laboratories in Forest Hills, Pennsylvania. [1] It was instrumental in the development in practical applications of nuclear science for energy production. [2] [3] [4] In particular, it was used in 1940 to discover the photofission of uranium and thorium, [5] [6] and was most cited for certain nuclear physics measurements. [7] The Westinghouse Atom Smasher was able to make precise measurements of nuclear reactions for research in nuclear power. [8] It was the first industrial Van de Graaff generator in the world, [9] and marked the beginning of nuclear research for civilian applications. [10] [11] Built in 1937, it was a 65-foot-tall (20 m) pear-shaped tower. [9] [12] It went dormant in 1958. [12] In 1985, it was named an Electrical Engineering Milestone by the Institute of Electrical and Electronics Engineers. [6]

Contents

History

The Westinghouse Atom Smasher was created due to the interest and development of physics in the early 1900s. [13] In the year 1932, there were some major advancements in the research of nuclear physics. The technology of the particle accelerator has been categorized into three lines of research. The first started with Ernest Rutherford's studies into the properties of atomic particles in the 1920s. [14] Then with John D. Cockroft and Ernest Walton producing the first nuclear disintegrations using artificially accelerated particles. [14] The second line of research was focused on high-energy accelerators and the development of resonant acceleration. [14] The third line of research was the invention of the betatron by Rolf Wideroe in 1923. [14] With the discovery of the nucleus being fresh, much research was being done on how to commercialize it. With the help of particle accelerators, scientists were able to see charged particles and how they are shaped. [15] The use of the particle accelerator allowed scientists to better understand how atoms, atomic nuclei, and nucleons are held together. [15] It also helped scientists learn about quantum physics and how the world works. [15] The Westinghouse atom smasher was the first particle accelerator built to be industrialized. [16] The atom smasher was made to perform the same tasks as the Van de Graaff generator but at a much larger scale with higher voltages. [13] It was used to force atoms to collide with each other at speeds close to the speed of light to create new particles and radiation. [17] These new particles were able to help scientists learn about the basics of matter. [17] The atom smasher remained upright until 1958, but it saw little use after the end of World War II. [18]

How it worked

Drawing of the machine with part of the tank cut away, showing the belts and high voltage electrode. Westinghouse Van de Graaff atom smasher - cutaway.png
Drawing of the machine with part of the tank cut away, showing the belts and high voltage electrode.
A view of the atom smasher in the 1930s or 1940s, when it was operational. Forest Hills atom smasher postcard.jpg
A view of the atom smasher in the 1930s or 1940s, when it was operational.

In a Van de Graaff generator, invented in 1929 by Robert J. Van de Graaff, an endless rubber or fabric belt carries electric charges from a roller at the base of the device and deposits them inside a hollow metal electrode at the top. This causes a high voltage to develop between electrodes at the top and bottom of the apparatus. [19]

In the Westinghouse machine, two high-speed belts traveled up a 47-foot shaft to a mushroom-shaped electrode near the top of the bulb-shaped enclosure, where electric charges were accumulated (see cutaway schematic). [20] Various ions, like those generated from hydrogen gas (protons) or helium gas (alpha particles), were injected into the upper part of an accelerator tube. The high electrostatic potential between the top and bottom of the tube then caused these subatomic particles to accelerate to extremely high velocities as they traveled down a 17-inch-diameter evacuated cylinder 40 feet in height, which was a sealed stack of many individual glass segments that collectively composed the largest vacuum tube in the world at the time of construction. [6] The accelerator tube ran between and parallel to the whirling belts to the base of the machine, where the accelerated particles bombarded experimental targets placed inside the tube, inducing various nuclear reactions. [19] [21]

The energy of the particles was measured through the gamma rays that the beam produced when its particles hit a fluorine target, which was directly related to the voltage potential between the machine's electrodes. [21]

The maximum voltage that a Van de Graaff generator can produce is limited by leakage of the charge off the upper electrode due to corona discharge and arcing. At atmospheric pressure, a Van de Graaff machine is generally limited to around 1 megavolt. Thus this instrument was installed inside a pear-shaped 65-foot tall, 30-foot diameter air tank which was pressurized during operation to 120 pounds per square inch. [20] High pressure improved the insulating qualities of the air and reduced charge leakage, allowing the machine to achieve a voltage potential of 5 megavolts. This allowed a beam energy of 5 MeV, although it was originally hoped to reach 10 MeV.

Wartime efforts

During the second world war, Westinghouse suspended fundamental research efforts, and instead focused on researching microwave radar. [22] This is similar to how M.I.T and Harvard also began their own organizations to study radiation and radio during the war. The atom smasher was shut down so that Westinghouse could focus on the electronics department. [22] Many of the contributors to the Westinghouse project moved onto find other jobs during this period of shut down, but stayed closely connected to the nuclear research that was happening during the time. [22]

Westinghouse's Lamp Division in Bloomfield, NJ began production of uranium metal which was used in the first atomic pile. Prior to becoming Director of Research in the Lamp Division, Harvey Rentschler developed a method of reducing uranium salts into metal to study possible use as a lamp filament. He found that the melting point was too low to be used and decided to shut down the project, until the atomic pile in Chicago began. The only immediate source for uranium metals was the Bloomfield facility. Rentschler was asked to begin production of these metals again for this new project. He started with a crude, low-level production line using galvanized wash tubs as vessels before enlarging the project to further production. [22] E. U. Condon as well as some other atom smasher workers, were sent to work closely on the Manhattan Project to develop uranium isotope separation techniques. The atom smasher itself was used as a compressed air tank for jet engine development during the war. [22]

As the war ended, Westinghouse returned to its normal research activities, bringing back many workers and the refurbished atom smasher. It was found, however, that the iron used for the atom smasher became brittle in low temperatures and the atom smasher may have been damaged during the war.[ citation needed ] This fact was found when several Liberty ships sailed through the freezing waters of Alaska, their exteriors began to crack and break up, causing the ships to sink due to metal failure.[ citation needed ]

Preservation efforts

The Atom Smasher in 2022, dislodged from its supports Demolished Westinghouse Atom Smasher 02.jpg
The Atom Smasher in 2022, dislodged from its supports

In 2012, the property surrounding the atom smasher was purchased by P&L Investments, LLC. [1] The company was run by Gary Silversmith, a developer who intended to build apartments and expressed an interest in saving the smasher. [23] In 2013, the Young Preservationists Association of Pittsburgh named it as one of the city's top 10 preservation opportunities. [23] During 2013, plans had been discussed of the Woodland Hills School District establishing a STEM educational facility with the atom smasher as the centerpiece, but the $4 to $5 million cost was prohibitive and the project never moved forward. [23]

By 2015, the structure was in significant disrepair and was dislodged from its supports, due to vandalism and age. [23] On January 20, 2015, Silversmith had the atom smasher removed from its supports and laid on its side. [2] Workers laid bricks to brace the fall, and tipped it over. [12] In an email to the Pittsburgh Post-Gazette , Silversmith pronounced his continuing commitment to refurbishing and restoring the atom smasher, saying "The iconic Atom Smasher bulb survives." [23] As of 2023, the atom smasher remains at the demolition site, exposed to the elements.

See also

Related Research Articles

<span class="mw-page-title-main">Fusor</span> An apparatus to create nuclear fusion

A fusor is a device that uses an electric field to heat ions to a temperature in which they undergo nuclear fusion. The machine induces a potential difference between two metal cages, inside a vacuum. Positive ions fall down this voltage drop, building up speed. If they collide in the center, they can fuse. This is one kind of an inertial electrostatic confinement device – a branch of fusion research.

<span class="mw-page-title-main">Van de Graaff generator</span> Electrostatic particle accelerator operating on the triboelectric effect

A Van de Graaff generator is an electrostatic generator which uses a moving belt to accumulate electric charge on a hollow metal globe on the top of an insulated column, creating very high electric potentials. It produces very high voltage direct current (DC) electricity at low current levels. It was invented by American physicist Robert J. Van de Graaff in 1929. The potential difference achieved by modern Van de Graaff generators can be as much as 5 megavolts. A tabletop version can produce on the order of 100 kV and can store enough energy to produce visible electric sparks. Small Van de Graaff machines are produced for entertainment, and for physics education to teach electrostatics; larger ones are displayed in some science museums.

<span class="mw-page-title-main">Forest Hills, Pennsylvania</span> Borough in Pennsylvania, United States

Forest Hills is a borough in Allegheny County, Pennsylvania, United States. The population was 6,429 at the 2020 census. It is a suburb of the Pittsburgh metropolitan area. The borough was named after Forest Hills, Queens.

<span class="mw-page-title-main">Robert J. Van de Graaff</span> American physicist (1901–1967)

Robert Jemison Van de Graaff was an American physicist, noted for his design and construction of high-voltage Van de Graaff generators. He spent most of his career in the Massachusetts Institute of Technology (MIT).

<span class="mw-page-title-main">Linear particle accelerator</span> Type of particle accelerator

A linear particle accelerator is a type of particle accelerator that accelerates charged subatomic particles or ions to a high speed by subjecting them to a series of oscillating electric potentials along a linear beamline. The principles for such machines were proposed by Gustav Ising in 1924, while the first machine that worked was constructed by Rolf Widerøe in 1928 at the RWTH Aachen University. Linacs have many applications: they generate X-rays and high energy electrons for medicinal purposes in radiation therapy, serve as particle injectors for higher-energy accelerators, and are used directly to achieve the highest kinetic energy for light particles for particle physics.

<span class="mw-page-title-main">Corona discharge</span> Ionization of air around a high-voltage conductor

A corona discharge is an electrical discharge caused by the ionization of a fluid such as air surrounding a conductor carrying a high voltage. It represents a local region where the air has undergone electrical breakdown and become conductive, allowing charge to continuously leak off the conductor into the air. A corona discharge occurs at locations where the strength of the electric field around a conductor exceeds the dielectric strength of the air. It is often seen as a bluish glow in the air adjacent to pointed metal conductors carrying high voltages, and emits light by the same mechanism as a gas discharge lamp. Corona discharges can also happen in weather, such as thunderstorms, where objects like ship masts or airplane wings have a charge significantly different from the air around them.

<span class="mw-page-title-main">Neutron generator</span> Source of neutrons from linear particle accelerators

Neutron generators are neutron source devices which contain compact linear particle accelerators and that produce neutrons by fusing isotopes of hydrogen together. The fusion reactions take place in these devices by accelerating either deuterium, tritium, or a mixture of these two isotopes into a metal hydride target which also contains deuterium, tritium or a mixture of these isotopes. Fusion of deuterium atoms results in the formation of a helium-3 ion and a neutron with a kinetic energy of approximately 2.5 MeV. Fusion of a deuterium and a tritium atom results in the formation of a helium-4 ion and a neutron with a kinetic energy of approximately 14.1 MeV. Neutron generators have applications in medicine, security, and materials analysis.

A thermionic converter consists of a hot electrode which thermionically emits electrons over a potential energy barrier to a cooler electrode, producing a useful electric power output. Caesium vapor is used to optimize the electrode work functions and provide an ion supply to neutralize the electron space charge.

A magnetohydrodynamic generator is a magnetohydrodynamic converter that transforms thermal energy and kinetic energy directly into electricity. An MHD generator, like a conventional generator, relies on moving a conductor through a magnetic field to generate electric current. The MHD generator uses hot conductive ionized gas as the moving conductor. The mechanical dynamo, in contrast, uses the motion of mechanical devices to accomplish this.

An atomic battery, nuclear battery, radioisotope battery or radioisotope generator is a device which uses energy from the decay of a radioactive isotope to generate electricity. Like nuclear reactors, they generate electricity from nuclear energy, but differ in that they do not use a chain reaction. Although commonly called batteries, they are technically not electrochemical and cannot be charged or recharged. They are very costly, but have an extremely long life and high energy density, and so they are typically used as power sources for equipment that must operate unattended for long periods of time, such as spacecraft, pacemakers, underwater systems and automated scientific stations in remote parts of the world.

<span class="mw-page-title-main">Pelletron</span>

A Pelletron is a type of electrostatic generator, structurally similar to a Van de Graaff generator. Pelletrons have been built in many sizes, from small units producing voltages up to 500 kilovolts (kV) and beam energies up to 1 megaelectronvolt (MeV) of kinetic energy, to the largest system, which has reached a DC voltage of over 25 megavolts and produced ion beams with energies over 900 MeV.

The Research School of Physics (RSPhys) was established with the creation of the Australian National University (ANU) in 1947. Located at the ANU's main campus in Canberra, the school is one of the four founding research schools in the ANU's Institute of Advanced Studies.

The Triangle Universities Nuclear Laboratory, abbreviated as TUNL, is a tripartite research consortium operated by Duke University, the University of North Carolina at Chapel Hill, North Carolina State University and North Carolina Central University. The laboratory is located on the West Campus of Duke University in Durham, North Carolina. Researchers are now drawn from several other universities around the United States in addition to members from the founding universities. TUNL also participates in long term collaborations with universities and laboratories around the world. Funding for TUNL comes primarily from the United States Department of Energy Office of Nuclear Physics.

<span class="mw-page-title-main">Denys Wilkinson Building</span>

The Denys Wilkinson Building is a prominent 1960s building in Oxford, England, designed by Philip Dowson at Arup in 1967.

<span class="mw-page-title-main">Particle accelerator</span> Research apparatus for particle physics

A particle accelerator is a machine that uses electromagnetic fields to propel charged particles to very high speeds and energies, and to contain them in well-defined beams.

<span class="mw-page-title-main">Pakistan Atomic Research Reactor</span> Pair of research nuclear reactors in Nilore, Islamabad, Pakistan

The Pakistan Atomic Research Reactor or (PARR) are two nuclear research reactors and two other experimental neutron sources located in the PINSTECH Laboratory, Nilore, Islamabad, Pakistan.

Terrestrial Physics is a sculpture by American artist Jim Sanborn which includes a full-scale working particle accelerator. It was displayed in the Museum of Contemporary Art as part of Denver's Biennial of the Americas from June–September 2010.

<span class="mw-page-title-main">Photofission</span> Fission of a nucleus via absorption of a gamma ray

Photofission is a process in which a nucleus, after absorbing a gamma ray, undergoes nuclear fission and splits into two or more fragments.

<span class="mw-page-title-main">Electrostatic particle accelerator</span> Accelerates particles with a static electric field

An electrostatic particle accelerator is a particle accelerator in which charged particles are accelerated to a high energy by a static high voltage potential. This contrasts with the other major category of particle accelerator, oscillating field particle accelerators, in which the particles are accelerated by oscillating electric fields.

<span class="mw-page-title-main">Nuclear power in Pennsylvania</span>

Nuclear power has been widely established in Pennsylvania since the 1950s and has grown to provide almost 25% of the energy produced in PA. This is achieved through the four active reactors currently operating. There are five inactive reactors in PA, including Three Mile Island, which had a partial meltdown and caused a reevaluation of nuclear reactor safety practices.

References

  1. 1 2 Walter, Marni Blake (September 1, 2015). "An Unlikely Atomic Landscape: Forest Hills and the Westinghouse Atom Smasher". Western Pennsylvania History Magazine. Senator John Heinz History Center. 98 (3): 36–49. Retrieved December 3, 2019.
  2. 1 2 Klein, Barbara (Winter 2016). "Reconstructing Pittsburgh's Atomic Past". Carnegie Magazine. Carnegie Museums of Pittsburgh. 83 (4). Retrieved December 8, 2019.
  3. ↑ "Van de Graaff particle accelerator, Westinghouse Electric and Manufacturing Co., Pittsburgh, PA, August 7, 1945". Explore PA History. WITF-TV . Retrieved February 19, 2015.
  4. ↑ "Westinghouse Electric Corporation [Science and Invention] Historical Marker". Explore PA History. WITF-TV . Retrieved February 19, 2015.
  5. ↑ Haxby, R.O.; Shoupp, W.E.; Stephens, W.E.; Wells, W.H. (January 1, 1941). "Photo-Fission of Uranium and Thorium". Physical Review. 59 (1): 57–62. Bibcode:1941PhRv...59...57H. doi:10.1103/PhysRev.59.57 . Retrieved December 3, 2019.
  6. 1 2 3 "Milestones: Westinghouse Atom Smasher, 1937". Engineering and Technology History Wiki . ETHW Partnership. May 29, 1985. Retrieved December 3, 2019. includes link to 1985 videotape: 'IEEE Milestone Dedication Ceremony'
  7. ↑ Haxby, R.O.; Shoupp, W.E.; Stephens, W.E.; Wells, W.H. (December 15, 1940). "Threshold for the Proton-Neutron Reactions of Lithium, Beryllium, Boron, and Carbon". Physical Review. 58 (12): 1035–1042. Bibcode:1940PhRv...58.1035H. doi:10.1103/PhysRev.58.1035 . Retrieved October 2, 2021.
  8. ↑ Coltman, John W. (February 1987). "The Westinghouse Atom Smasher???An IEEE Historical Milestone". IEEE Transactions on Education. E-30 (1): 37–42. doi:10.1109/TE.1987.5570584. S2CID   20864894 – via IEEE.
  9. 1 2 "PHMC Historical Markers Search" (Searchable database). Pennsylvania Historical and Museum Commission. Commonwealth of Pennsylvania. Retrieved 2015-02-15.
  10. ↑ Toker, Franklin (2009). Pittsburgh: A New Portrait. p. 470. ISBN   9780822943716.
  11. ↑ Fey, Maury; Dollard, Walt (April 3, 2015). "The Echoes from Westinghouse at Forest Hills / Forest Hills Nuclear History". Atomic Confluence. Retrieved December 7, 2019.
  12. 1 2 3 O'Neill, Brian (January 25, 2015). "Brian O'Neill: With Forest Hills atom smasher's fall, part of history tumbles". Pittsburgh Post-Gazette .
  13. 1 2 Coltman, John W. (February 1987). "The Westinghouse Atom Smasher???An IEEE Historical Milestone". IEEE Transactions on Education. E-30 (1): 37–39. doi:10.1109/TE.1987.5570584. S2CID   20864894 – via IEEE.
  14. 1 2 3 4 "Particle accelerators". ETHW. 2014-04-28. Retrieved 2023-04-14.
  15. 1 2 3 "DOE Explains...Particle Accelerators". Energy.gov. Retrieved 2023-04-14.
  16. ↑ "Historic Westinghouse Atom Smasher Fate Unclear - Nuclear Museum". ahf.nuclearmuseum.org/. 2023-03-24. Retrieved 2023-03-24.
  17. 1 2 Tanya Lewis (2013-08-12). "Incredible Technology: How Atom Smashers Work". livescience.com. Retrieved 2023-03-17.
  18. ↑ Cheney, Jim (2022-01-02). "The Amazing Story of the Abandoned Westinghouse Atom Smasher in Pittsburgh". Uncovering PA. Retrieved 2023-03-24.
  19. 1 2 "Mightiest Atom Smasher At East Pittsburgh, PA". Life . Vol. 3, no. 9. August 30, 1937. pp. 36–39. Retrieved December 14, 2019.
  20. 1 2 "Huge generator to smash atoms". Popular Science . 131 (1): 35. July 1937. Retrieved April 28, 2015.
  21. 1 2 Chubb, L.W. (November 1941). "Giving Atoms the Third Degree". Popular Mechanics . 76 (5): 8–11. Retrieved December 14, 2019.
  22. 1 2 3 4 5 Coltman, John (1987). "The Westinghouse Atom Smasher-An IEEE Historical Milestone". IEEE Transactions on Education. E-30 (1): 40. doi:10.1109/TE.1987.5570584. S2CID   20864894.
  23. 1 2 3 4 5 Harkins, Jill (January 21, 2015). "Atom smasher in Forest Hills torn down; restoration promised". Pittsburgh Post-Gazette .
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.