Wheeltapper

Last updated
A wheeltapper at work on the Bulgarian railway in 2009. Wheel tapper.jpg
A wheeltapper at work on the Bulgarian railway in 2009.
A wheeltapper's hammer with the rings. Vozmistr Zilina 02.jpg
A wheeltapper's hammer with the rings.
A wheeltapper signing off after checking the wheels of a train at Budapest-Keleti railway station in 2014. He has placed his long hammer on the train's buffers. A wheeltapper signing off at Budapest-Keleti.jpg
A wheeltapper signing off after checking the wheels of a train at Budapest-Keleti railway station in 2014. He has placed his long hammer on the train's buffers.

A wheeltapper is a railway worker employed to check the structural integrity of train wheels and that axle boxes are not overheating.

Contents

Typically employed at large urban railway stations and in goods yards, they tap wheels with a long-handled hammer and listen to the sound made to determine the integrity of the wheel; cracked wheels, like cracked bells, do not sound the same as their intact counterparts (they do not "ring true").

Wheeltappers also check that the axle boxes are not too hot by using the back of their hand. [1] [2]

Although wheeltappers still operate in some eastern European countries, in countries with modern planned maintenance procedures and line-side defect detectors, such as hot box detectors, wheeltappers are redundant. The job is mostly associated with the steam age. Wheeltappers were vital to the smooth running of the railways as a cracked wheel or overheated axle bearing would lead to delays and the loss of revenue. These were particularly common in the 19th century, when axle bearings were lubricated by grease. At this time, metallurgy was a more haphazard science and thus it was impossible to test steel wheels for cracks: the role of the wheeltapper was of crucial importance. [3] [4]

Anecdote

There is an anecdote of a wheeltapper who had worked diligently for years wheeltapping without ever questioning or understanding the purpose. This originated with Rudyard Kipling in Delhi, and is referenced in his work "Captains Courageous" of 1897, [5] [6] [7] although it had spread to the United States by 1932. [3] [4] Another version of the tale is told in the 1937 Will Hay British comedy film Oh, Mr Porter!. A German version of the story was told by the German humourist Sigismund von Radecki. [8]

In Tolstoy's Anna Karenina, a railway worker is accidentally killed. He is probably a wheeltapper, and the man's gruesome death anticipates Anna's eventual suicide.

See also

Related Research Articles

<span class="mw-page-title-main">Bogie</span> Chassis for wheels and suspension under vehicles

A bogie is a chassis or framework that carries a wheelset, attached to a vehicle—a modular subassembly of wheels and axles. Bogies take various forms in various modes of transport. A bogie may remain normally attached or be quickly detachable. It may include a suspension component within it, or be solid and in turn be suspended ; it may be mounted on a swivel, as traditionally on a railway carriage or locomotive, additionally jointed and sprung, or held in place by other means.

<span class="mw-page-title-main">Rubber-tyred metro</span> Form of rapid transit

A rubber-tyred metro or rubber-tired metro is a form of rapid transit system that uses a mix of road and rail technology. The vehicles have wheels with rubber tires that run on rolling pads inside guide bars for traction, as well as traditional railway steel wheels with deep flanges on steel tracks for guidance through conventional switches as well as guidance in case a tyre fails. Most rubber-tyred trains are purpose-built and designed for the system on which they operate. Guided buses are sometimes referred to as 'trams on tyres', and compared to rubber-tyred metros.

<i>Puffing Billy</i> (locomotive) Preserved early British steam locomotive

Puffing Billy is the world's oldest surviving steam locomotive, constructed in 1813–1814 by colliery viewer William Hedley, enginewright Jonathan Forster and blacksmith Timothy Hackworth for Christopher Blackett, the owner of Wylam Colliery near Newcastle upon Tyne, in the United Kingdom. It was employed to haul coal chaldron wagons from the mine at Wylam to the docks at Lemington in Northumberland.

Rail transport terms are a form of technical terminology applied to railways. Although many terms are uniform across different nations and companies, they are by no means universal, with differences often originating from parallel development of rail transport systems in different parts of the world, and in the national origins of the engineers and managers who built the inaugural rail infrastructure. An example is the term railroad, used in North America, and railway, generally used in English-speaking countries outside North America and by the International Union of Railways. In English-speaking countries outside the United Kingdom, a mixture of US and UK terms may exist.

<span class="mw-page-title-main">Steam locomotive components</span> Glossary of the main components of a typical steam locomotive

Main components found on a typical steam locomotive include:

<span class="mw-page-title-main">4-2-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-2-0 represents the wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle and no trailing wheels. This type of locomotive is often called a Jervis type, the name of the original designer.

<span class="mw-page-title-main">Derailment</span> Form of train incident

In rail transport, a derailment is a type of train wreck that occurs when a rail vehicle such as a train comes off its rails. Although many derailments are minor, all result in temporary disruption of the proper operation of the railway system and they are a potentially serious hazard.

<span class="mw-page-title-main">4-2-4T</span> Tank locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-2-4 represents the wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle, and four trailing wheels on two axles.

<span class="mw-page-title-main">Meigs Elevated Railway</span>

The Meigs Elevated Railway was an experimental but unsuccessful 19th century elevated steam-powered urban rapid transit system, often described as a monorail but technically pre-electric third rail. It was invented in the US by Josiah Vincent Meigs, of Lowell, Massachusetts, and was demonstrated from 1886 to 1894 in a suburb of Boston called East Cambridge.

<span class="mw-page-title-main">Track circuit</span> Electrical device used to detect the presence of trains on rail tracks

A track circuit is an electrical device used to prove the absence of a train on rail tracks to signallers and control relevant signals. An alternative to track circuits are axle counters.

<span class="mw-page-title-main">Adhesion railway</span> Railway which relies on adhesion traction to move a train

An adhesion railway relies on adhesion traction to move the train, and is the most widespread and common type of railway in the world. Adhesion traction is the friction between the drive wheels and the steel rail. Since the vast majority of railways are adhesion railways, the term adhesion railway is used only when it is necessary to distinguish adhesion railways from railways moved by other means, such as by a stationary engine pulling on a cable attached to the cars or by railways that are moved by a pinion meshing with a rack.

<span class="mw-page-title-main">Coupling rod</span> Small metallic rod connecting driving wheels of a locomotive

A coupling rod or side rod connects the driving wheels of a locomotive. Steam locomotives in particular usually have them, but some diesel and electric locomotives, especially older ones and shunter locomotives, also have them. The coupling rods transfer the power of drive to all wheels.

<span class="mw-page-title-main">Hunting oscillation</span> Self-oscillation about an equilibrium that is usually unwanted

Hunting oscillation is a self-oscillation, usually unwanted, about an equilibrium. The expression came into use in the 19th century and describes how a system "hunts" for equilibrium. The expression is used to describe phenomena in such diverse fields as electronics, aviation, biology, and railway engineering.

William Bridges Adams was an English author, inventor and locomotive engineer. He is best known for his patented Adams axle – a successful radial axle design in use on railways in Britain until the end of steam traction in 1968 – and the railway fishplate. His writings, including English Pleasure Carriages (1837) and Roads and Rails (1862) covered all forms of land transport. Later he became a noted writer on political reform, under the pen name Junius Redivivus ; a reference to a political letter writer of the previous century.

A derailment of a night mail train from Scotland to London occurred on the North Eastern Railway when a tender axle suddenly fractured on 28 December 1869 near Dalton Junction, south of Darlington, England. There were only slight injuries among the staff, but the accident was a warning of the problem of premature axle failure.

<span class="mw-page-title-main">South African Class 21 2-10-4</span>

The South African Railways Class 21 2-10-4 of 1937 was a class of steam locomotives used in South Africa.

<span class="mw-page-title-main">South African Class 6Z 2-6-4</span>

The South African Railways Class 6Z 2-6-4 of 1901 was a steam locomotive from the pre-Union era in the Cape of Good Hope.

NGR 4-6-2TT <i>Havelock</i>

The Natal Government Railways 4-6-2TT Havelock of 1888 was a South African steam locomotive from the pre-Union era in the Natal Colony.

<span class="mw-page-title-main">Steam spring</span>

Steam springs or steam suspension are a form of suspension used for some early steam locomotives designed and built by George Stephenson. They were only briefly used and may have been used for fewer than ten locomotives.

<span class="mw-page-title-main">South African Dutton road-rail tractors</span>

The South African Railways Dutton road-rail tractors of 1923 were road-rail steam tractors.

References

  1. Tooke, Jon. "West Somerset Railway :: Bogies". www.wsr.org.uk. Stephen Edge. Retrieved 21 February 2014.
  2. "Railway signal: or, Lights along the line". Railway Mission. London. 12. 1894."It was as instinctively the duty of a Christian to check evil as it was that of a wheel tapper to report a hot box"
  3. 1 2 Blake, John (5 January 1932). "Fogs". Uncommon Sense. Schenectady Gazette . Retrieved 2 November 2019.
  4. 1 2 "Clippings on 5 January 1932 › Page 6". newspapers.com. No. 4616. Dauphin, Pennsylvania: Harrisburg Evening News. 5 January 1932. p. 6. Retrieved 22 February 2014. "... A young friend of mine told me the other day about some experiments he had been making with steel rails. By means of electricity it is now possible to examine rails for flaws before they are laid, and thus greatly to reduce the chance of serious accident on account of hidden defects. What is now being done with rails will soon be done with structural steel and all metal which goes into service where not only strength, but lasting strength is required. , - I remember in my childhood that when a train came into a station a man who had been waiting there with a hammer in his hand walked along the platform and tapped each wheel flange,' to ascertain whether or not there were any cracks in the wheel. ... That was the best test known then, but not a good one. And it had its drawbacks. Doubtless the reader remembers of the story of the railroad superintendent who was boasting to a friend of the efficiency of the organization he had built up. Pointing to a wheel tapper, he said, "That man has that job because of long faithfulness and experience." "Why does he tap the wheels?" asked the friend. The superintendent called the man over. "How long have you been with the road?" he asked. "Twenty years." "How long have you been tapping wheels?" "Eighteen years." "See," the superintendent said to his friend, "that's the kind of man we keep on an important job." Said the friend to the man: "Tell me why you tap the wheels." The workman looked puzzled. "Darned if I know," he said. To this man, whose type is nonexistent now in railroad operation, his job was his job, and there was no use trying to find out why he did it. , ... . He worked in the fog with which all uneducated and untrained people are surrounded, making no effort to get out of it..."
  5. At p. 223 line 6: "the clink-clink of hammers that tested the Krupp-steel wheels". "The Sons of Martha". The Kipling Society . 5 April 2012. Retrieved 21 February 2014.
  6. "Public Utilities Fortnightly". Public Utilities Fortnightly. 33. 1944. Retrieved 21 February 2014. "The late Rudyard Kipling once told a story about a native wheel tapper who worked in the railroad terminal at Delhi. Because someone had set him to work tapping locomotive wheels without telling him why, he had been hammering away at ..."
  7. Hospitals. American Hospital Association. 22. 1948.{{cite journal}}: Missing or empty |title= (help) "The first was an "ignorant wheel tapper" who routinely and carefully tapped all wheels of the trains just as he had been told. He tapped wheels and drew his pay for many years without ever learning the reason for his tapping"
  8. (in German) von Radecki, Sigismund (1953). Das ABC des Lachens: ein Anekdotenbuch zur Unterhaltung und Belehrung."Ein alter Mann kommt mit einem langen Hammer und klopft nach der bekannten Methode die Räder ab." ..."Der Mann: „Nächsten Juli werden's fünfzig Jahre." Passagier: «Dann sagen Sie mir, bitte, — was ist eigentlich der Grund, weshalb die Räder so beklopft werden?» Der Mann (kratzt sich den Kopf) : «Ich will verdammt sein, wenn ich's weiß!...» (An old man, a wheeltapper, was walking along, tapping the wheels with a long hammer. A passenger, his neighbour of fifty years, asked him that day: "Pray tell me : why do you tap the wheels?" The old man replied, scratching his head: "I'll be damned if I know.")