Wiard rifle

Last updated
6-pdr (2.72 kg) Wiard gun and carriage at the Arsenal (now Fort McNair), Washington, D.C. Wiard gun.jpg
6-pdr (2.72 kg) Wiard gun and carriage at the Arsenal (now Fort McNair), Washington, D.C.
6-pdr (2.72 kg) Wiard gun with reproduction non-Wiard carriage at Stones River National Battlefield in Tennessee 6-pounder Wiard cannon at Stones River National Battlefield.jpg
6-pdr (2.72 kg) Wiard gun with reproduction non-Wiard carriage at Stones River National Battlefield in Tennessee
6-pdr (2.72 kg) Wiard gun and carriage. Production weapons lacked the cascabel and used a different elevating screw under the breech. Annual report of the American Institute, of the City of New York (1862) (17811167564).jpg
6-pdr (2.72 kg) Wiard gun and carriage. Production weapons lacked the cascabel and used a different elevating screw under the breech.
Proposed Wiard 20 in (510 mm) gun on a pivot carriage Annual report of the American Institute, of the City of New York (1862) (18245885778).jpg
Proposed Wiard 20 in (510 mm) gun on a pivot carriage

The Wiard rifle refers to several weapons invented by Norman Wiard, most commonly a semi-steel light artillery piece in six-pounder and twelve-pounder calibers. About 60 were manufactured between 1861 and 1862 during the American Civil War, at O'Donnell's Foundry, New York City: "although apparently excellent weapons, [they] do not seem to have been very popular". [2] Wiard also designed a rifled steel version of the Dahlgren boat howitzer (a 12-pounder (5.44 kg) weapon with a 3.4 in (86 mm) bore), among other gun types. [1] [3] Further, Wiard unsuccessfully attempted to develop a 15 in (381 mm) rifled gun for the US Navy and proposed a 20 in (510 mm) gun. In 1881 he unsuccessfully proposed various "combined rifle and smoothbore" weapon conversions of Rodman guns and Parrott rifles. [4]

Contents

Wiard described two calibers: a six-pounder (2.72 kg) rifle with a 2.6 in (66 mm) bore, and a twelve-pounder (5.44 kg) smoothbore weapon with a 3.67 in (93 mm) bore. All survivors are rifled, though this may have occurred long after manufacture; this was a common practice during the war. [5] Surviving Wiard guns vary considerably in manufacturing details and markings. [1] Documentation survives for orders of 45 6-pounder Wiards, six 12-pounder 3.67 in (93 mm) Wiards (though at least 13 survive), and 12 12-pounder 3.4 in (86 mm) Wiard rifled howitzers. [6]

6-pounder rifle

The six-pounder's tube was 53 in (135 cm) long, weighed 725 pounds (329 kg) and had an effective range (at 35°) of 7,000 yards (6,400 m), with a standard powder charge of 0.75 pounds (0.34 kg) and 6 lb. (2.72 kg) Hotchkiss bolt-type projectiles. [2]

The 6-pdr Wiard rifle was cast in puddled wrought iron (semi-steel) and was mounted in a special Wiard field carriage that was unique in its design. [7] The rim base was spaced farther apart than any diameter of the tube, permitting unrestricted rotation on the trunnions without interference from the undercarriage. Wiard altered the shape of the carriage's cheeks, relocated the axle and provided a long elevating screw; this made firing at elevation of up to 35 degrees possible. [5] It also meant that one carriage could slide beneath the next, allowing for more efficient storage and transportation. Other innovations included a flat trail plate with a metal keel (preventing the rifle digging itself in the ground upon recoil), and a better system for braking the carriage without damaging the iron tires. [1] [2]

Reportedly, three artillery batteries associated with Union Major General Daniel Sickles' "Excelsior Brigade" were armed with 6-pdr and 12-pdr Wiard guns, possibly as a result of a friendship between Wiard and Sickles. Two batteries of six 6-pdr guns each were ordered specifically for that brigade in 1861. [8] None of Wiard's weapons were widely adopted, and few survive today. [1] [4]

15-inch experimental rifle

Wiard published pamphlets claiming that thermal stress was the primary reason for burst cannon. This was a significant problem during the Civil War, especially with Parrott rifles. The US Navy Ordnance Department under Rear Admiral John A. Dahlgren awarded Wiard a contract to produce two 15 in (381 mm) rifled guns of about the same weight as the smoothbore XV-inch (381 mm) Dahlgren shell gun. Wiard was to be paid $10,750 in 1860s money for each gun. The result was probably one of the most complex guns ever cast in one piece. The reinforce area around the breech was nine inches larger diameter than the bore and concave in profile. Running through the reinforce were numerous fluted passages for cooling, made with shallow S-curves. One gun did not survive the manufacturing process when the numerous casting cores resisted removal; the other gun burst at its first shot. It appears no further development occurred, though an artist's concept of a similar proposed 20 in (510 mm) weapon survives. [4]

1881 conversion proposals

In 1881 Wiard proposed to the Secretary of War the conversion of numerous existing Rodman and Parrott coast artillery weapons into considerably lengthened "combined rifle and smoothbore" guns, by cutting off the muzzle portions of the guns and bolting on a long rifled barrel extension. The conversions would be preceded by a number of experiments, including some breechloading conversions. His proposals were apparently rejected. [9]

Surviving examples

At least 24 6-pounder Wiard rifles survive. Examples can be seen on display in front of the Fayette County Courthouse in Uniontown, Pennsylvania, two in the US Army Field Artillery Museum at Fort Sill, Oklahoma, and four at Shiloh National Military Park with two at Stones River National Battlefield in Tennessee. [8]

At least 13 rifled 12-pdr (3.67-inch) Wiards survive, including four at Shiloh National Military Park in Tennessee and three in private hands. [10]

Two 12-pdr (3.4-inch) Wiard boat howitzers are at the National Museum of the United States Navy in the Washington Navy Yard, D.C. One each are in Charleston, South Carolina (at the Charleston Rifle Club) [1] and Bellevue, Ohio. [3]

Wiard-manufactured versions of the 3-inch Ordnance rifle are in Belchertown, Massachusetts and Ripley, Ohio. [11]

See also

Related Research Articles

<span class="mw-page-title-main">Rodman gun</span> Type of American Civil War–era cannon

The Rodman gun is any of a series of American Civil War–era columbiads designed by Union artilleryman Thomas Jackson Rodman (1815–1871). The guns were designed to fire both shot and shell. These heavy guns were intended to be mounted in seacoast fortifications. They were built in 8-inch, 10-inch, 13-inch, 15-inch, and 20-inch bore. Other than size, the guns were all nearly identical in design, with a curving bottle shape, large flat cascabels with ratchets or sockets for the elevating mechanism. Rodman guns were true guns that did not have a howitzer-like powder chamber, as did many earlier columbiads. Rodman guns differed from all previous artillery because they were hollow cast, a new technology that Rodman developed that resulted in cast-iron guns that were much stronger than their predecessors.

<span class="mw-page-title-main">Parrott rifle</span> Muzzle loading artillery weapon

The Parrott rifle was a type of muzzle-loading rifled artillery weapon used extensively in the American Civil War.

<span class="mw-page-title-main">Dahlgren gun</span> American naval gun of the 19th Century

Dahlgren guns were muzzle-loading naval artillery designed by Rear Admiral John A. Dahlgren USN, mostly used in the period of the American Civil War. Dahlgren's design philosophy evolved from an accidental explosion in 1849 of a 32 lb (14.5 kg) gun being tested for accuracy, killing a gunner. He believed a safer, more powerful naval cannon could be designed using more scientific design criteria. Dahlgren guns were designed with a smooth curved shape, equalizing strain and concentrating more weight of metal in the gun breech where the greatest pressure of expanding propellant gases needed to be met to keep the gun from bursting. Because of their rounded contours, Dahlgren guns were nicknamed "soda bottles", a shape which became their most identifiable characteristic.

<span class="mw-page-title-main">Brooke rifle</span>

The Brooke rifle was a type of rifled, muzzle-loading naval and coast defense gun designed by John Mercer Brooke, an officer in the Confederate States Navy. They were produced by plants in Richmond, Virginia, and Selma, Alabama, between 1861 and 1865 during the American Civil War. They served afloat on Confederate ships and ashore in coast defense batteries operated by the Confederate States Army.

<span class="mw-page-title-main">Field artillery in the American Civil War</span>

Field artillery in the American Civil War refers to the artillery weapons, equipment, and practices used by the Artillery branch to support the infantry and cavalry forces in the field. It does not include siege artillery, use of artillery in fixed fortifications, or coastal or naval artillery. Nor does it include smaller, specialized artillery classified as small arms.

<span class="mw-page-title-main">Columbiad</span> Type of large-caliber cannon from the 19th century

The columbiad was a large-caliber, smoothbore, muzzle-loading cannon able to fire heavy projectiles at both high and low trajectories. This feature enabled the columbiad to fire solid shot or shell to long ranges, making it an excellent seacoast defense weapon for its day. Invented by Colonel George Bomford, United States Army, in 1811, columbiads were used in United States seacoast defense from the War of 1812 until the early years of the 20th century. Very few columbiads were used outside of the U.S. and Confederate Armies; nevertheless, the columbiad is considered by some as the inspiration for the later shell-only cannons developed by Frenchman Henri-Joseph Paixhans some 30 years later.

<span class="mw-page-title-main">Charles Tillinghast James</span> American engineer and senator (1805–1862)

Charles Tillinghast James was a consulting manufacturing engineer, early proponent of steam mills, and United States Democratic Senator from the state of Rhode Island from 1851 to 1857.

<span class="mw-page-title-main">Siege artillery in the American Civil War</span>

Siege artillery is heavy artillery primarily used in military attacks on fortified positions. At the time of the American Civil War, the U.S. Army classified its artillery into three types, depending on the gun's weight and intended use. Field artillery were light pieces that often traveled with the armies. Siege and garrison artillery were heavy pieces that could be used either in attacking or defending fortified places. Seacoast artillery were the heaviest pieces and were intended to be used in permanent fortifications along the seaboard. They were primarily designed to fire on attacking warships. The distinctions are somewhat arbitrary, as field, siege and garrison, and seacoast artillery were all used in various attacks and defenses of fortifications. This article will focus on the use of heavy artillery in the attack of fortified places during the American Civil War.

<span class="mw-page-title-main">James rifle</span> Type of artillery gun

James rifle is a generic term to describe any artillery gun rifled to the James pattern for use in the American Civil War, as used in some period documentation. Charles T. James developed a rifled projectile and rifling system. Modern authorities such as Warren Ripley and James Hazlett have suggested that the term "James rifle" only properly applies to 3.8 in (97 mm) bore field artillery pieces rifled to fire James' projectiles. They contend that the term does not apply to smoothbores that were later rifled to take the James projectiles in 3.67 in (93 mm) caliber or other calibers, and that those should instead be referred to as "Rifled 6 pounder", etc. The rifle was created in 1861.

Blakely rifle or Blakely gun is the name of a series of rifled muzzle-loading cannon designed by British army officer Captain Theophilus Alexander Blakely in the 1850s and 1860s. Blakely was a pioneer in the banding and rifling of cannon but the British army declined to use Blakely's design. The guns were mostly sold to Russia and the Confederacy during the American Civil War. Blakely rifles were imported by the Confederacy in larger numbers than other Imported English cannon. The State of Massachusetts bought eight 9-inch and four 11-inch models.

<span class="mw-page-title-main">Sylvanus Sawyer</span> American inventor (1822–1895)

Sylvanus Sawyer was a United States inventor.

<span class="mw-page-title-main">Red River Campaign Union order of battle</span>

The following is the organization of the Union forces engaged in the Red River campaign, during the American Civil War in 1864. Order of battle compiled from the army organization during the campaign. The Confederate order of battle is listed separately.

<span class="mw-page-title-main">3-inch ordnance rifle</span> Rifled cannon

The 3-inch ordnance rifle, model 1861 was a wrought iron muzzleloading rifled cannon that was adopted by the United States Army in 1861 and widely used in field artillery units during the American Civil War. It fired a 9.5 lb (4.3 kg) projectile to a distance of 1,830 yd (1,670 m) at an elevation of 5°. The 3-inch rifle was not as effective in firing canister shot as the heavier 12-pounder Napoleon, but it proved to be highly accurate at longer ranges when firing common shell or spherical case shot. There was only one reported case of a 3-inch ordnance rifle bursting in action. This was in stark contrast to the similarly-sized cast iron 10-pounder Parrott rifles which occasionally burst without warning, inflicting injury on the gun crews. The Confederate States of America lacked the technology to manufacture reliable copies of the 3-inch ordnance rifle. However, the Confederate States Army respected the weapons and employed those captured from Federal forces.

<span class="mw-page-title-main">M1841 6-pounder field gun</span> Smoothbore cannon

The M1841 6-pounder field gun was a bronze smoothbore muzzleloading cannon that was adopted by the United States Army in 1841 and used from the Mexican–American War to the American Civil War. It fired a 6.1 lb (2.8 kg) round shot up to a distance of 1,523 yd (1,393 m) at 5° elevation. It could also fire canister shot and spherical case shot (shrapnel). The cannon proved very effective when employed by light artillery units during the Mexican–American War. The cannon was used during the early years of the American Civil War, but it was soon outclassed by newer field guns such as the M1857 12-pounder Napoleon. In the U.S. Army, the 6-pounders were replaced as soon as more modern weapons became available and none were manufactured after 1862. However, the Confederate States Army continued to use the cannon for a longer period because the lesser industrial capacity of the South could not produce new guns as fast as the North.

<span class="mw-page-title-main">M1841 12-pounder howitzer</span> Howitzer

The M1841 12-pounder howitzer was a bronze smoothbore muzzle-loading artillery piece that was adopted by the United States Army in 1841 and employed during the Mexican–American War and the American Civil War. It fired a 8.9 lb (4.0 kg) shell up to a distance of 1,072 yd (980 m) at 5° elevation. It could also fire canister shot and spherical case shot. The howitzer proved effective when employed by light artillery units during the Mexican–American War. The howitzer was used throughout the American Civil War, but it was outclassed by the 12-pounder Napoleon which combined the functions of both field gun and howitzer. In the U.S. Army, the 12-pounder howitzers were replaced as soon as more modern weapons became available. Though none were manufactured after 1862, the weapon was not officially discarded by the U.S. Army until 1868. The Confederate States of America also manufactured and employed the howitzer during the American Civil War.

<span class="mw-page-title-main">10-pounder Parrott rifle</span> Rifled cannon

The 10-pounder Parrott rifle, Model 1861 was a muzzle-loading rifled cannon made of cast iron that was adopted by the United States Army in 1861 and often used in field artillery units during the American Civil War. Like other Parrott rifles, the gun breech was reinforced by a distinctive band made of wrought iron. The 10-pounder Parrott rifle was capable of firing shell, shrapnel shell, canister shot, or solid shot. Midway through the war, the Federal government discontinued the 2.9 in (74 mm) version in favor of a 3.0 in (76 mm) version. Despite the reinforcing band, the guns occasionally burst without warning, which endangered the gun crews. The Confederate States of America manufactured a number of successful copies of the gun.

<span class="mw-page-title-main">20-pounder Parrott rifle</span> Type of rifled cannon

The 20-pounder Parrott rifle, Model 1861 was a cast iron muzzle-loading rifled cannon that was adopted by the United States Army in 1861 and employed in field artillery units during the American Civil War. As with other Parrott rifles, the gun breech was reinforced by a distinctive wrought iron reinforcing band. The gun fired a 20 lb (9.1 kg) projectile to a distance of 1,900 yd (1,737 m) at an elevation of 5°. The 20-pounder Parrott rifle could fire shell, shrapnel shell, canister shot, and more rarely solid shot. In spite of the reinforcing band, the 20-pounder earned a dubious reputation for bursting without warning, killing or injuring gunners. The Confederate States of America also manufactured copies of the gun.

<span class="mw-page-title-main">14-pounder James rifle</span> Rifled cannon

The 14-pounder James rifle or James rifled 6-pounder or 3.8-inch James rifle was a bronze muzzle-loading rifled cannon that was employed by the United States Army and the Confederate States Army during the American Civil War. It fired a 14 lb (6.4 kg) solid shot up to a distance of 1,530 yd (1,400 m) at 5° elevation. It could also fire canister shot and common shell. Shortly before the war broke out, the U.S. Army adopted a plan to convert M1841 6-pounder field guns from smoothbore to rifled artillery. Rifling the existing 6-pounders would both improve the gun's accuracy and increase the weight of the shell. There were two major types produced, both were bronze with a bore (caliber) of 3.8 in (97 mm) that would accommodate ammunition designed by Charles Tillinghast James. The first type looked exactly like an M1841 6-pounder field gun. The second type had a longer tube with a smooth exterior profile similar to a 3-inch Ordnance rifle. At first the rifles were quite accurate. However, it was discovered that the bronze rifling quickly wore out and accuracy declined. None of the rifles were manufactured after 1862, and many were withdrawn from service, though some artillery units employed the guns until the end of the war.

<span class="mw-page-title-main">M1841 24-pounder howitzer</span> Howitzer

The M1841 24-pounder howitzer was a bronze smoothbore muzzle-loading artillery piece adopted by the United States Army in 1841 and employed from the Mexican–American War through the American Civil War. It fired a 18.4 lb (8.3 kg) shell to a distance of 1,322 yd (1,209 m) at 5° elevation. It could also fire canister shot and spherical case shot. The howitzer was designed to be employed in a mixed battery with 12-pounder field guns. By the time of the American Civil War, the 24-pounder howitzer was superseded by the 12-pounder Napoleon, which combined the functions of both field gun and howitzer. The 24-pounder howitzer's use as field artillery was limited during the conflict and production of the weapon in the North ended in 1863. The Confederate States of America manufactured a few 24-pounder howitzers and imported others from the Austrian Empire.

<span class="mw-page-title-main">M1857 12-pounder Napoleon</span> Gun-Howitzer

The M1857 12-pounder Napoleon or Light 12-pounder gun or 12-pounder gun-howitzer was a bronze smoothbore muzzleloading artillery piece that was adopted by the United States Army in 1857 and extensively employed in the American Civil War. The gun was the American-manufactured version of the French canon obusier de 12 which combined the functions of both field gun and howitzer. The weapon proved to be simple to produce, reliable, and robust. It fired a 12.03 lb (5.5 kg) round shot a distance of 1,619 to 1,680 yd at 5° elevation. It could also fire canister shot, common shell, and spherical case shot. The 12-pounder Napoleon outclassed and soon replaced the M1841 6-pounder field gun and the M1841 12-pounder howitzer in the U.S. Army, while replacement of these older weapons was slower in the Confederate States Army. A total of 1,157 were produced for the U.S. Army, all but a few in the period 1861–1863. The Confederate States of America utilized captured U.S. 12-pounder Napoleons and also manufactured about 500 during the war. The weapon was named after Napoleon III of France who helped develop the weapon.

References

  1. 1 2 3 4 5 6 Ripley 1984, pp. 165-169
  2. 1 2 3 Artillery Profile: 6 pdr. Wiard Rifle
  3. 1 2 Olmstead 1997, pp. 177-178
  4. 1 2 3 Olmstead 1997, pp. 144-146
  5. 1 2 James C. Hazlett; Edwin Olmstead; M. Hume Parks (2004). Field Artillery Weapons of the Civil War, 2nd rev. ed. University of Illinois Press. pp. 165–168. ISBN   0-252-07210-3.
  6. Olmstead 1997, pp. 177-178, 268, 301
  7. A Primer on American Civil War Field Artillery
  8. 1 2 Olmstead 1997, p. 268
  9. Report of the Board on Heavy Ordnance and Projectiles. Washington: Government Printing Office. 1882. pp. 233–245.
  10. Olmstead 1997, p. 301
  11. Olmstead 1997, p. 281