Wind controller

Last updated
San Francisco musician Onyx Ashanti playing a wind controller Onyx The Digital Pied Piper.jpg
San Francisco musician Onyx Ashanti playing a wind controller

A wind controller, sometimes referred to as a wind synthesizer, is an electronic wind instrument. It is usually a MIDI controller associated with one or more music synthesizers. [1] Wind controllers are most commonly played and fingered like a woodwind instrument, usually the saxophone, with the next most common being brass fingering, particularly the trumpet. Models have been produced that play and finger like other acoustic instruments such as the recorder or the tin whistle. The most common form of wind controller uses electronic sensors to convert fingering, breath pressure, bite pressure, finger pressure, and other gesture or action information into control signals that affect musical sounds. The control signals or MIDI messages generated by the wind controller are used to control internal or external devices such as analog synthesizers or MIDI-compatible synthesizers, synth modules, softsynths, sequencers, or even non-instruments such as lighting systems.

Contents

Simpler breath controllers are also available. Unlike wind controllers, they do not trigger notes and are intended for use in conjunction with a keyboard or synthesizer. [2] A breath controller can be used with a keyboard MIDI controller to add articulation and expression to notes sounded on the keyboard. For example, a performer who has pressed a long-held note on the keyboard with a sustained sound, such as a string pad, could blow harder into the breath controller set to control volume to make this note crescendo or gradually blow more and more gently to make the volume die away.

Some wind controllers contain a built-in sound generator and can be connected directly to an amplifier or a set of headphones. Some even include small built-in speakers such as the Roland Aerophone series and the Akai EWI SOLO, however their small speaker systems cannot reproduce bass notes correctly or provide adequate sound levels for serious live performance, so these built in sound systems are strictly for home practice at modest playback levels. Some wind controllers such as EWI USB, Berglund NuEVI, and NuRAD are strictly "controllers" and do not make a sound on their own, and thus must be connected via MIDI or USB to a sound generating device (or a soft synth). For this reason, a wind controller can sound like almost anything (depending on the capabilities of its sound generator). Wind controller models such as the Akai EWI5000, EWI SOLO, and Roland Aerophones have built-in onboard sample sounds, as well as the MIDI and/or USB outputs. The now discontinued EWI 4000s had a DSP subtractive synthesizer built in rather than sampled instruments and so remains popular on the second hand market.

The fingering and shape of the wind controller put no acoustic limitations on how the wind controller actually sounds. For example, a wind controller can be made to sound like a trumpet, saxophone, violin, piano, pipe organ, choir, synthesizers or even a barnyard rooster. Whether designed primarily to appeal to woodwind, brass, or harmonica players, controllers can produce any virtual instrument sound. Some virtual instruments and hardware synthesizers are better suited to adaption for wind controller performance than others. A hardware or software synthesizer's suitability is largely dependent on the control options available. MIDI CC mapping options allow the player to control elements like the filter cut off via breath control for expressive dynamics. Custom patches (or presets) are required for optimal expressivity, to take advantage of the considerable benefits of wind control.

History

Predecessors

Already in the 1930s Benjamin F. Miessner was working on various electroacoustic instruments. Among these was an electroacoustic clarinet, that featured an electromagnetic pickup for the reed vibration and was connected to a variety of electronic filters. Miessner's patent from 1938 [3] [4] marks the birth of the electronic wind instrument family. [5]

Early experiments with fully electronic instruments started in the 1940s. Leo F. J. Arnold invented an electronic clarinet that featured an on/off-switch controlled by the human breath. This instrument is documented in Arnold's patent from 1942. [6] [7] [5]

The Frenchman Georges Jenny and the German engineer Ernst Zacharias played an essential role in the development of the first analog wind controllers in the 1950s. Jenny received his patent for an electronic wind instrument in 1954. [8] [9] It features a breath transducer for variable volume control, that works with a piezo element. The prototypes of Zacharias, who started to work on electronic wind instruments in 1956, lead to the first commercially produced wind synthesizer – the Hohner Electra-Melodica, released in 1967. [5]

Analog wind controllers

Computone Wind Synthesizer Controller
(essentially, Lyricon II without synthesizer) Computone Wind Synthesizer.jpg
Computone Wind Synthesizer Controller
(essentially, Lyricon II without synthesizer)

The first widely played wind controller was the Lyricon from Computone which came about in the 1970s era of analog synthesizers. The Lyricon was based on the fingerings of the saxophone and used a similar mouthpiece. It set the standard for hardware-based wind controllers with a number of features that have been preserved in today's MIDI wind controllers, including the ability to correctly interpret the expressive use of reed articulation, breath-controlled dynamics, and embouchure-controlled pitch variation. The Lyricon also expanded the playing range several octaves beyond the accustomed range for woodwind players. Tone generation on the Lyricon was limited to a dedicated analog synthesizer designed specifically to interpret various wired analog outputs from the instrument. Notable early recording artists on the Lyricon include Roland Kirk and Tom Scott. Third-party adaptations would later bring the Lyricon into the MIDI era.

The next wind controller of note was the brass style Steiner EVI invented by wind controller pioneer Nyle Steiner. Steiner was the inventor of the brass style EVI (electronic valve instrument) wind controller designed for brass players, as well as the EWI (electronic woodwind instrument) designed for woodwind players. Steiner made many very important contributions to the development wind controllers. His research started in the late 1960s and his first wind controller was the Steiner Parker EVI released in 1975. Originally this EVI was only a "controller" which sent control voltages only for pitch and gate and was to be connected to commercial analog synthesizers. The breath sensor on this early original model EVI was very crude consisting of a simple on/off switch activated by the player's breath pressure. Steiner went on to refine and develop new expressive methods of sensing the player's gestures which have since become standard wind controller features such as an expressive proportional type breath sensor (as compared to earlier switch on/off type breath sensing), tonguing velocity sensing, a vibrato lever for the right hand thumb, pitch bend up and down thumb sensors, glide sensing for portamento effects, bite sensing, lip sensing, and others. Steiner's analog wind controller systems eventually included his own analog synthesizer design bundled into a complete self-contained system (Steinerphone). Steiner was also a studio musician and he played his EVI on the soundtrack of the film "Apocalypse Now". Shortly after the release of the Steiner EVI, woodwind musicians asked Steiner to make a woodwind version of the EVI, and Steiner designed the EWI. The EWI was made famous in the mid 1980s by jazz musician Michael Brecker with the group Steps Ahead when he played the Steinerphone EWI with dazzling bravura. Around 1985 Steiner developed a sophisticated MIDI interface for his EVI and EWI by modifying the JL Cooper Wind Driver box. In 1987, Akai licensed Steiner's EVI and EWI designs and released the Akai EVI1000 brass style and woodwind style EWI1000 wind controllers along with a companion EWV2000 sound module. The EWV2000 featured a MIDI output jack which allowed it to connect to additional MIDI synthesizers opening up a universe of possibilities and numerous recordings in both movie and television soundtracks as well as pop music recordings. The EVI1000 or EWI1000 controllers combined with the EWV2000 sound generator were actually a hybrid digital/analog system. Analog signals were derived from the various sensors (e.g., key, bite, bend, glide, etc.) on the EVI1000/EWI1000 controller unit, then converted to digital signals by a front-end microprocessor in the EWV2000. These digital signals were then altered by the microprocessor and D/A converted to internal analog control voltages appropriate for the analog synthesizer ICs within the EWV2000. The D/A used within the EWV2000 used a very high resolution and conversion rate, such that the responsiveness to the player felt immediate, i.e. "analog". The subsequent EWI3000, EWI3020, and EWI3030m systems also used this A/D/A scheme within their dedicated tone modules, though these later models of the EWI would support MIDI in and out.

MIDI controller revolution

With the advent of MIDI and computer-based digital samplers in the early 1980s, the new music technology ushered in a variety of "alternative" MIDI controllers. In the 1960s and 1970s, the main way for a musician to play synthesizers was with a keyboard. With MIDI, it became possible for non-keyboardists to play MIDI synthesizers and samplers for the first time. These new controllers included, most notably: MIDI drums, MIDI guitar synthesizers, and MIDI wind controllers. Leading the way to demonstrate the virtuosic potential of this new arsenal of MIDI technology on the world stage through extensive touring and big-label recordings were guitarist Pat Metheny playing the guitar synthesizer and saxophonist Michael Brecker playing the wind controller, each leading their own bands.

Digital wind controllers and MIDI

The most widely played[ citation needed ] purely digital wind controllers include the Yamaha WX series and the Akai EWI series. These instruments are capable of generating a standard MIDI data stream, thereby eliminating the need for dedicated synthesizers and opening up the possibility of controlling any MIDI-compatible synthesizer or other device. These instruments, while usually shaped something like a clarinet with a saxophone-like key layout, offer the option to recognize fingerings for an assortment of woodwinds and brass. The major distinction between the approach taken by the two companies is in the action of their keys. Yamaha WX series instruments have moving keys like a saxophone or flute that actuate small switches when pressed. Akai EWI series instruments have immovable, touch-sensitive keys that signal when the player is merely making contact with the keys. In the hands of skilled players each of these instruments has proved its ability to perform at a high level of artistry.

The now defunct Casio DH series were toy-like wind controllers introduced in the mid-1980s and had a built-in speaker (with limited sound sources) as well as being usable as MIDI controllers.

A recent addition to the wind controller category is the Synthophone, an entirely electronic wind controller embedded in the shell of an alto saxophone. Since the electronic components take up the open space of the saxophone, it is not playable as an acoustic instrument; however, since the exterior matches that of the acoustic instrument, it is significantly more familiar to play.

Additionally, keyboard-based breath controllers are also available. These modulate standard keyboards, computers and other midi devices, meaning they are not played like a woodwind, but like a keyboard, but with a breath controller (similar to a pump organ.) Yamaha's BC series can be used to control DX and EX units. Midi Solutions makes a converter box that allows any midi device to be controlled by the Yamaha BC controllers. TEControl also makes a USB device that is simply a jump drive with a breath tube attached that can be plugged into any standard computer.

Acoustic wind instrument conversion to software MIDI as wind control

Through the 1990s the major hardware-based wind controllers improved through successive models and a number of minor, and less commercially successful, controllers were introduced. These software solutions for a time were the only viable bridge between the woodwind or brass player and the synthesizer. But dating back to the 1980s a lesser known software-based alternative began to emerge. With a software-based conversion program the musician plays an ordinary wind instrument into a microphone at which point a software program (sometimes with dedicated computer hardware) interpreted the pitch, dynamics, and expression of this acoustic sound and generates a standard MIDI data stream just in time to play along with the performer through a synthesizer.

While the first commercial product attempting this approach dates back to the Fairlight Voicetracker VT-5 of 1985, a more successful modern approach using software on personal computers (combined with a digital audio workstation and softsynths) is relatively new. Two more recent examples of this highly unusual archaic approach were Thing-1 from ThingTone Software, and Digital Ear Realtime from Epinoisis Software.

Range of expression

Due in part to their fast and sensitive key switching and breath sensing systems both the hardware and software based wind controllers put precise demands on a player who hopes to play with technical mastery. An accomplished woodwind or brass player may find that a hardware or software based wind controller will produce an unwanted note (called a "glitch") even at the slightest imperfection in fingering or articulation technique. As the better recordings show, these difficulties can be overcome with practice.

In contrast to live performance with a wind controller, and in response to these technical challenges, some "performances" in recordings are achieved through careful post-processing or note-by-note insertion and editing using a notation or sequencer program.[ original research? ]

Virtually all current synthesizers and their sound libraries are designed to be played primarily with a keyboard controller, whereby the player often reserves one hand to manipulate the many real-time controls to determine how the instrument sounds, perhaps using a foot to manipulate an expression pedal.[ original research? ]

Wind controller players do not have access to as many of these controls and thus are often limited in exploiting all of the potential voicings and articulation changes of their synthesizers, but the technologies of physical modeling (Yamaha VL70-m), sample modeling and hybrid technologies (SWAM engine) promise more expression control for wind controller players. Furthermore, sound designers are paying more attention to the different playing idioms in which their sounds will be used. For example, certain percussion sounds do not work well with a wind controller simply because playing a struck instrument it is not idiomatic to the woodwind, whereas synthesized instruments that model the acoustic properties of a woodwind will seem fitting and natural to a wind controller player.[ original research? ]

A few of the many hardware (Yamaha, Roland, Akai, Kurzweill, Aodyo) and software (Native Instruments, Garritan, SampleModeling, Sample Logic, LinPlug, Audio Modeling) synthesizers provide specific support for wind controllers, and they vary widely with respect to how well they emulate acoustic wind, brass, and string instruments. The SWAM technology, devised by Audio Modeling, has specific settings for Yamaha, EWI, Sylphyo and Aerophone wind controllers and has succeeded in producing very rapid natural responsiveness with their woodwinds and bowed strings virtual instruments. Also Samplemodeling has specific settings for wind controllers on their Kontakt-based brass. That said, virtually all current synthesizers respond to MIDI continuous controllers and the data provided by wind controller breath and lip input can usually be routed to them in an expressive way.[ original research? ]

An example of a hardware synthesizer with wind controller support is the Yamaha VL70-m which uses physical modeling synthesis. Physical modeling allows for a unique level of responsiveness to the control signals sent from a wind controller. The emulation of acoustic instrument sounds varies in quality. The VL70-m is able to connect directly to the Yamaha WX series of controllers and via MIDI to the Akai and other wind controllers. Similarly, an example of a software synthesizer with support for wind controller playing is the Zebra synthesizer from Urs Heckmann, Apple's ES2 softsynth, Korg's Mono/Poly softsynth, Audio Modeling's SWAM instruments, and many others. It is important to note that whatever synth is used, it will need to be set up with specially designed breath responsive patches for optimal response to a wind controller.

Manufacturers

The major manufacturers of wind controllers are Akai, Roland, and Yamaha. As of the beginning of 2022 the available mass production wind controllers include the Akai EWI SOLO, EWI5000, Roland Aerophone models AE-01, AE-05, AE-10, AE-20 and AE-30, Aodyo Sylphyo. Less commonly available model is Synthophone. Also there are ultra low volume handmade instruments that are nonethelss advanced (owing to clever use of off the shelf electronics) such as the Berglund NuRad, NuEVI and WARBL from Mowry Stringed Instruments.

Models out of production and discontinued include the Akai EWI USB (discontinued 2022), 4000s (discontinued 2019). Also 20th century (part analogue) models from Akai such as the 3020, 3000 and 1000. Older discontinued models from Yamaha include WX11, WX7 and WX5. Casio offered more toy-like offerings including the DH-100, DH-200, DH-500 and DH-800.

Wind controllers with saxophone fingerings

Synthophone

The Synthophone is a Wind Controller synthesizer. It is a MIDI sax offering real sax fingerings and a standard sax embouchure. The MIDI hardware allows the key action as well as breath and lip pressure to be read as MIDI data. Since it is a saxophone, the fingerings are the same with some additions - Several combinations allow real-time editing of patches and harmony. The instrument has made several appearances at the NAMM Show, including in 1997. [10]

Others

After the Synthophone, several other MIDI saxes have been released that offer real sax fingerings: in 2019 the Travel Sax by Odisei Music, [11] in 2020 the YDS-150 digital saxophone by Yamaha [12] and also in 2020 the Emeo. [13] These MIDI saxes have sensors for breath pressure to adjust the volume, but they do not read lip pressure and thus do not allow the pitch to be controlled by the embouchure or by the manner of breathing. With the YDS-150, pitch bend can be achieved using a separate input on the instrument. The Travel Sax, the YDS-150 and the Emeo provide for settings customisation using a Bluetooth-connected mobile app.

See also

Related Research Articles

<span class="mw-page-title-main">MIDI</span> Electronic musical instrument connection standard

MIDI is a technical standard that describes a communication protocol, digital interface, and electrical connectors that connect a wide variety of electronic musical instruments, computers, and related audio devices for playing, editing, and recording music.

<span class="mw-page-title-main">Music technology (electronic and digital)</span>

Digital music technology encompasses digital instruments, computers, electronic effects units, software, or digital audio equipment by a performer, composer, sound engineer, DJ, or record producer to produce, perform or record music. The term refers to electronic devices, instruments, computer hardware, and software used in performance, playback, recording, composition, mixing, analysis, and editing of music.

A music sequencer is a device or application software that can record, edit, or play back music, by handling note and performance information in several forms, typically CV/Gate, MIDI, or Open Sound Control, and possibly audio and automation data for digital audio workstations (DAWs) and plug-ins.

Akai is a Hong Kong manufacturer of consumer electronics. It was founded as Akai Electric Company Ltd in Tokyo, Japan, in 1946.

A music workstation is an electronic musical instrument providing the facilities of:

<span class="mw-page-title-main">Electronic keyboard</span> Musical instrument

An electronic keyboard, portable keyboard, or digital keyboard is an electronic musical instrument based on keyboard instruments. Electronic keyboards include synthesizers, digital pianos, stage pianos, electronic organs and digital audio workstations. In technical terms, an electronic keyboard is a rompler-based synthesizer with a low-wattage power amplifier and small loudspeakers.

<span class="mw-page-title-main">Ableton Live</span> Digital audio workstation

Ableton Live, also known as Live or sometimes colloquially as "Ableton", is a digital audio workstation for macOS and Windows developed by the German company Ableton.

Keytar is a keyboard instrument similar to a synthesizer or MIDI controller that is supported by a strap around the neck and shoulders, similar to the way a guitar is held.

<span class="mw-page-title-main">MIDI controller</span> Device that produces MIDI data

A MIDI controller is any hardware or software that generates and transmits Musical Instrument Digital Interface (MIDI) data to MIDI-enabled devices, typically to trigger sounds and control parameters of an electronic music performance. They most often use a musical keyboard to send data about the pitch of notes to play, although a MIDI controller may trigger lighting and other effects. A wind controller has a sensor that converts breath pressure to volume information and lip pressure to control pitch. Controllers for percussion and stringed instruments exist, as well as specialized and experimental devices. Some MIDI controllers are used in association with specific digital audio workstation software. The original MIDI specification has been extended to include a greater range of control features.

<span class="mw-page-title-main">Sound module</span> Externally controlled electronic musical instrument

A sound module is an electronic musical instrument without a human-playable interface such as a piano-style musical keyboard. Sound modules have to be operated using an externally connected device, which is often a MIDI controller, of which the most common type is the musical keyboard. Another common way of controlling a sound module is through a sequencer, which is computer hardware or software designed to record and playback control information for sound-generating hardware. Connections between sound modules, controllers, and sequencers are generally made with MIDI, which is a standardized interface designed for this purpose.

An analog modeling synthesizer is a synthesizer that generates the sounds of traditional analog synthesizers using digital signal processing components and software algorithms. Analog modeling synthesizers simulate the behavior of the original electronic circuitry in order to digitally replicate their tone.

<span class="mw-page-title-main">Lyricon</span> Electronic wind instrument

The Lyricon is an electronic wind instrument, the first wind controller to be constructed.

Arturia is a French electronics company founded in 1999 and based in Grenoble, France. The company designs and manufactures audio interfaces and electronic musical instruments, including software synthesizers, drum machines, analog synthesizers, digital synthesizers, MIDI controllers, sequencers, and mobile apps.

EWI is a type of wind controller, an electronic musical instrument invented by Nyle Steiner. The EWI has been used by many artists across many different genres.

<span class="mw-page-title-main">Guitar synthesizer</span> Electronic system to modify guitar sound

A guitar synthesizer is any one of a number of musical instrument systems that allow a guitarist to access synthesizer capabilities.

Orchestral enhancement is the technique of using orchestration techniques, architectural modifications, or electronic technologies to modify the sound, complexity, or color of a musical theatre, ballet or opera pit orchestra. Orchestral enhancements are used both to create new sounds and to add capabilities to existing orchestral ensembles.

<span class="mw-page-title-main">Roland JX-8P</span>

Roland JX-8P is a 61-key, velocity- and aftertouch-sensitive, six-note polyphonic, almost entirely analog synthesizer released by Roland in 1985. In a time of rising popularity of digital frequency modulation synthesizers, such as Yamaha DX7, JX-8P was marketed as the best of both worlds: while it was possible to create classic analog synth sounds, several new modulation parameters and redesigned hardware enabled it to produce certain types of sounds associated with FM synthesis, such as metallic percussive sounds. Likewise, traditional hands-on controls were replaced with a Yamaha DX7-style interface with membrane buttons and one "edit" slider.

<span class="mw-page-title-main">Synthesizer</span> Electronic musical instrument

A synthesizer is an electronic musical instrument that generates audio signals. Synthesizers typically create sounds by generating waveforms through methods including subtractive synthesis, additive synthesis and frequency modulation synthesis. These sounds may be altered by components such as filters, which cut or boost frequencies; envelopes, which control articulation, or how notes begin and end; and low-frequency oscillators, which modulate parameters such as pitch, volume, or filter characteristics affecting timbre. Synthesizers are typically played with keyboards or controlled by sequencers, software or other instruments and may be synchronized to other equipment via MIDI.

<i>Rockoon</i> (T-Square album) 1980 studio album by T-Square

Rockoon is the fourth studio album by Japanese Jazz fusion band T-Square. It was released on April 1, 1980.

References

  1. "Four Wind Controllers That Are Worth Owning | Vintage Synth Explorer". www.vintagesynth.com. Retrieved 2022-08-25.
  2. "Breath Controller". Sweetwater. Aug 14, 2003. Retrieved 2020-01-14.
  3. Miessner, Benjamin F. (November 29, 1938). "United States Patent: 2138500". www.uspto.gov. USPTO . Retrieved May 3, 2021.
  4. Miessner, Benjamin F. (November 29, 1938). "Apparatus for the production of music" . Retrieved May 3, 2021., US002138500, 1938.
  5. 1 2 3 Swoboda, Andreas (2017). Die Anfänge der elektronischen Blasinstrumente (1 ed.). Osnabrück: epOs. ISBN   9783940255709. OCLC   978263084.
  6. Arnold, Leo F. J. (November 10, 1942). "United States Patent: 2301184". www.uspto.gov. USPTO . Retrieved May 3, 2021.
  7. Arnold, Leo F. J. (November 10, 1942). "Electrical clarinet" . Retrieved May 3, 2021., US002301184, 1942.
  8. Jenny, Georges (1954-02-10). "The Patent Office, Patent Specification: 703733". Espacenet . UK IPO . Retrieved May 3, 2021.
  9. Jenny, Georges (1954-02-10). "Improvements in or relating to electronic musical instruments" . Retrieved May 3, 2021., GB703733, 1954.
  10. "Wind Controller Summit At 1997 NAMM". www.patchmanmusic.com.
  11. Julian Horsey (2019-03-14). "Travel Sax super small electronic saxophone" . Retrieved 2020-10-10.
  12. Paul Ridden (2020-09-24). "Yamaha blows out authentic-sounding digital saxophone" . Retrieved 2020-10-10.
  13. "Israeli start-up develops digital practice saxophone". ajuede.com. 2020-07-03. Retrieved 2023-02-06.