Wine gallon

Last updated

A wine gallon is a unit of capacity that was used routinely in England as far back as the 14th century, and by statute under Queen Anne since 1707. [1] [2] Britain abandoned the wine gallon in 1826 when it adopted imperial units for measurement. The 1707 wine gallon is the basis of the United States' gallon, as well as other measures. [3]

Contents

The Imperial gallon was defined with yet another set of temperature and pressure values (62 °F (17 °C) and 30.0 inHg (102 kPa)).

To convert a number of wine gallons to the equivalent number of Imperial gallons, multiply by 0.833111. To convert a number of Imperial gallons to the equivalent number of wine gallons, multiply by 1.200320.

Some research concludes that the wine gallon was originally meant to hold 8 troy pounds of wine. [3] The 1707 British statute defines the wine gallon as 231 cubic inches (3,790 cm3) – e.g. a cylinder 7 inches (178 mm) in diameter and 6 inches (152 mm) high, [nb 1] c. 3.785 litre – and was used to measure the volume of wine and other commercial liquids such as cooking oils and honey. [4] A 14th-century barrel of wine contained 31.5 US gal (119 L; 26.2 imp gal), which equals one-eighth of the tun of 252 US gallons (954 L; 210 imp gal).

See also

Notes

  1. π was often approximated 3+17 at the time.

Related Research Articles

<span class="mw-page-title-main">Gallon</span> Units of volume

The gallon is a unit of volume in British imperial units and United States customary units. Three different versions are in current use:

<span class="mw-page-title-main">Hogshead</span> Unit of volume

A hogshead is a large cask of liquid. More specifically, it refers to a specified volume, measured in either imperial or US customary measures, primarily applied to alcoholic beverages, such as wine, ale, or cider.

<span class="mw-page-title-main">Imperial units</span> System of measurements

The imperial system of units, imperial system or imperial units is the system of units first defined in the British Weights and Measures Act 1824 and continued to be developed through a series of Weights and Measures Acts and amendments.

<span class="mw-page-title-main">United States customary units</span> System of units of measurement commonly used in the United States

United States customary units form a system of measurement units commonly used in the United States and most U.S. territories, since being standardized and adopted in 1832. The United States customary system developed from English units that were in use in the British Empire before the U.S. became an independent country. The United Kingdom's system of measures was overhauled in 1824 to create the imperial system, which was officially adopted in 1826, changing the definitions of some of its units. Consequently, while many U.S. units are essentially similar to their imperial counterparts, there are significant differences between the systems.

<span class="mw-page-title-main">Pint</span> Unit of volume in the imperial and US systems

The pint is a unit of volume or capacity in both the imperial and United States customary measurement systems. In both of those systems it is traditionally one eighth of a gallon. The British imperial pint is about 20% larger than the American pint because the two systems are defined differently. Almost all other countries have standardized on the metric system, so although some of them still also have traditional units called pints, the volume varies by regional custom.

The quart is an English unit of volume equal to a quarter of a gallon. Three kinds of quarts are currently used: the liquid quart and dry quart of the US customary system and the imperial quart of the British imperial system. All are roughly equal to one liter. It is divided into two pints or four cups. Historically, the exact size of the quart has varied with the different values of gallons over time and in reference to different commodities.

<span class="mw-page-title-main">Fluid ounce</span> Unit of volume in imperial and US customary

A fluid ounce is a unit of volume typically used for measuring liquids. The British Imperial, the United States customary, and the United States food labeling fluid ounce are the only three that are still in common use, although various definitions have been used throughout history.

<span class="mw-page-title-main">Bushel</span> Unit of volume with numerous different definitions

A bushel is an imperial and US customary unit of volume based upon an earlier measure of dry capacity. The old bushel is equal to 2 kennings (obsolete), 4 pecks, or 8 dry gallons, and was used mostly for agricultural products, such as wheat. In modern usage, the volume is nominal, with bushels denoting a mass defined differently for each commodity.

<span class="mw-page-title-main">Barrel (unit)</span> Series of units for volume measurement

A barrel is one of several units of volume applied in various contexts; there are dry barrels, fluid barrels, oil barrels, and so forth. For historical reasons the volumes of some barrel units are roughly double the volumes of others; volumes in common use range approximately from 100 to 200 litres. In many connections the term drum is used almost interchangeably with barrel.

<span class="mw-page-title-main">Barrel</span> Hollow cylindrical container

A barrel or cask is a hollow cylindrical container with a bulging center, longer than it is wide. They are traditionally made of wooden staves and bound by wooden or metal hoops. The word vat is often used for large containers for liquids, usually alcoholic beverages; a small barrel or cask is known as a keg.

The tun is an English unit of liquid volume, used for measuring wine, oil or honey. Typically a large vat or vessel, most often holding 252 wine gallons, but occasionally other sizes were also used. The modern tun is about 954 litres.

English units are the units of measurement used in England up to 1826, which evolved as a combination of the Anglo-Saxon and Roman systems of units. Various standards have applied to English units at different times, in different places, and for different applications.

<span class="mw-page-title-main">Comparison of the imperial and US customary measurement systems</span>

Both the British imperial measurement system and United States customary systems of measurement derive from earlier English unit systems used prior to 1824 that were the result of a combination of the local Anglo-Saxon units inherited from Germanic tribes and Roman units.

Alcohol measurements are units of measurement for determining amounts of beverage alcohol.

Capacities of wine casks were formerly measured and standardised according to a specific system of English units. The various units were historically defined in terms of the wine gallon so varied according to the definition of the gallon until the adoption of the Queen Anne wine gallon in 1707. In the United Kingdom and its colonies the units were redefined with the introduction of the imperial system whilst the Queen Anne wine gallon was adopted as the standard US liquid gallon.

Capacities of brewery casks were formerly measured and standardised according to a specific system of English units. The system was originally based on the ale gallon of 282 cubic inches. In United Kingdom and its colonies, with the adoption of the imperial system in 1824, the units were redefined in terms of the slightly smaller imperial gallon. The older units continued in use in the United States.

<span class="mw-page-title-main">Imperial and US customary measurement systems</span> English (pre 1824), Imperial (post 1824) and US Customary (post 1776) units of measure

The imperial and US customary measurement systems are both derived from an earlier English system of measurement which in turn can be traced back to Ancient Roman units of measurement, and Carolingian and Saxon units of measure.

The quarter was used as the name of several distinct English units based on ¼ sizes of some base unit.

A number of units of measurement were used in South Africa to measure quantities like length, mass, capacity, etc. The Imperial system of measurements was made standard in 1922 and the metric system was adopted in 1970.

The Exchequer Standards may refer to the set of official English standards for weights and measures created by Queen Elizabeth I, and in effect from 1588 to 1825, when the Imperial units system took effect, or to the whole range of English unit standards maintained by the Court of the Exchequer from the 1200s, or to the physical reference standards physically kept at the Exchequer and used as the legal reference until the such responsibility was transferred in the 1860s, after the Imperial system had been established.

References

  1. "Wine Gallon". Sizes.com. Retrieved 6 September 2016.
  2. "The Carysfort Committee & the Wine Gallon, 1758" (PDF). Retrieved 6 September 2016.
  3. 1 2 Rowlett, Russ (September 13, 2001). "Gallon". How Many? A Dictionary of Units of Measurement. University of North Carolina at Chapel Hill . Retrieved 2020-01-16.
  4. "wine barrel". Sizes.com. 2009-02-02. Retrieved 2010-07-29.