Wings of Freedom Flitplane

Last updated

Flitplane
Role Ultralight aircraft
National origin United States
Manufacturer Wings of Freedom
Designer Ed Fisher
First flight1995
Introduction1995
StatusProduction ended (2019)
Number built50 (Dec 2011) [1]

The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio. [1] [2] [3] [4]

Contents

The Flitplane was designed as a low-cost aircraft with the look of an antique aircraft design for the US FAR 103 Ultralight Vehicles category with its maximum 254 lb (115 kg) empty weight requirement. [3] [5]

In late 2019 the company website had been taken down and it is likely that production had ended. [6]

Development

The Flitplane was designed in 1995 by Ed Fisher who also designed the Skylite ultralight and the Micro-Mong home-built aircraft. The design was acquired by Joe Naylor and Mark W. Klotz who formed Wings of Freedom Aviation Inc. in 1996 to develop the design and market it. [7]

Naylor and Klotz made many changes to the design but retained the antique look of the aircraft and its distinctive large triangular windshield. [2]

The Flitplane's fuselage is fabricated from a welded truss of 4130 steel tubing. The 27 ft (8.2 m) wings are of aluminum "ladder-type" construction, are strut-braced and utilize jury struts. The fuel tank is integrated into the wing centre-section. The wings and tail are covered in doped aircraft fabric. The engine is mounted in front of the high wing, above the cockpit. The original powerplant was a 35 hp (26 kW) Cuyuna 460 engine, with a 40 hp (30 kW) Rotax 447 optional. Later engine options added included the 28 hp (21 kW) Hirth F-33, the 45 hp (34 kW) Zanzottera MZ 201 and the Kawasaki 440 40 hp (30 kW) engine. [2] [4]

The conventional landing gear is suspended using fibreglass axles. The tailwheel is steerable. The controls are conventional three-axis and include full-span ailerons. The large, flat-plate triangular windshield protects the pilot from the propeller blast and has distinctive cut-outs for the rudder pedals. [2] [4]

The Flitplane is available as plans, a complete kit, partial kits or as a finished and ready-to-fly aircraft. The company claims that the aircraft can be built from the kit in 100 hours or 500 hours from plans. [2] [5]

Specifications (Flitplane)

Data from Company website [4]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

The Zenair Zipper is a Canadian ultralight high-wing, single seat aircraft that was designed by Chris Heintz and produced by Zenair.

Aero-Works Aerolite 103 American ultralight airplane

The Aero-Works Aerolite 103 is an American single seat, high-wing, pusher configuration ultralight aircraft, designed by Terry Raber and introduced by Aero-Works, Inc, of Millersburg, Ohio, in 1997. The aircraft's model number indicates that it was designed to comply with the Federal Aviation Administration FAR 103 ultralight rules.

ISON Airbike

The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.

Spectrum Beaver

The Spectrum Beaver is a family of single- and two-place, pusher configuration, high-wing ultralight aircraft that were first introduced by Spectrum Aircraft of Surrey, British Columbia, Canada, in 1983.

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

Flightstar

The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.

Fisher FP-202 Koala Canadian ultralight aircraft

The Fisher FP-202 Koala is a Canadian single-seat high wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

Fisher FP-101 American ultralight airplane

The Fisher FP-101 is an American single-seat, high-wing, conventional landing gear, tractor configuration single engine ultralight aircraft that was available in kit form from Lite Flite of South Webster, Ohio and later Fisher Flying Products of Edgeley, North Dakota.

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

CGS Hawk

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

Belite Aircraft Superlite

The Belite Superlite is a single-seat, high-wing, single-engine ultralight aircraft developed from the Kitfox Lite aircraft especially for the United States FAR 103 Ultralight Vehicles category.

The Teman Mono-Fly is an American ultralight aircraft that was designed by structural engineer Bob Teman and produced by Teman Aircraft Inc. The aircraft was supplied as a kit for amateur construction and later as a factory-completed aircraft.

Raceair Skylite American ultralight airplane

The Raceair Skylite is an American ultralight aircraft that was designed by Ed Fisher and made available in the form of plans for amateur construction, by Raceair Designs.

DAR Solo Bulgarian ultralight aircraft

The DAR Solo is a Bulgarian ultralight aircraft, designed by Tony Ilieff and produced by Aeroplanes DAR, first flying in August 2008.

The Norman Aviation Nordic II is a Canadian advanced ultralight aircraft, designed by Jacques Norman and produced by Norman Aviation of Saint-Anselme, Quebec, first flying in 1986. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft and remained in production through 2012.

The Wings of Freedom Phoenix 103 is an American amateur-built ultralight aircraft that was produced by Wings of Freedom of Hubbard, Ohio. When it was available it was supplied as a kit for amateur construction.

The Ivanov ZJ-Viera (Faith) is a Czech ultralight and light-sport aircraft that was designed by Marek Ivanov and produced by Ivanov Aero s.r.o. of Hradec Králové. The aircraft was supplied as a kit for amateur construction or complete and ready-to-fly.

References

  1. 1 2 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 76. Belvoir Publications. ISSN   0891-1851
  2. 1 2 3 4 5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-19. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  3. 1 2 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 295. BAI Communications. ISBN   0-9636409-4-1
  4. 1 2 3 4 Wings of Freedom Aviation Inc (2008). "Flitplane" . Retrieved October 14, 2009.
  5. 1 2 Wings of Freedom Aviation Inc (n.d.). "Flitplane - Homebuilding available". Archived from the original on June 17, 2009. Retrieved October 14, 2009.
  6. ↑ Wings of Freedom. "Wings of Freedom". www.wingsoffreedomaviation.com. Retrieved March 6, 2020.
  7. ↑ Wings of Freedom Aviation Inc (n.d.). "About us" . Retrieved October 14, 2009.[ dead link ]
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.