Wortley Top Forge

Last updated

Wortley Top Forge
Wortley Top Forge - geograph.org.uk - 257518.jpg
Wortley Top Forge
South Yorkshire UK location map.svg
Red pog.svg
Location within South Yorkshire
General information
Location Wortley, South Yorkshire
CountryEngland
Coordinates 53°29′41″N1°33′29″W / 53.494669°N 1.557946°W / 53.494669; -1.557946 Coordinates: 53°29′41″N1°33′29″W / 53.494669°N 1.557946°W / 53.494669; -1.557946
Website
http://www.topforge.co.uk/
Designated30 July 1952 [1]
Reference no.1018262
Listed Building – Grade I
Designated18 March 1968 [2]
Reference no.1018262
Belly helve hammer, water-powered forging hammer Belly helve hammer, Wortley Top Forge - geograph.org.uk - 257521.jpg
Belly helve hammer, water-powered forging hammer

Wortley Top Forge is an historic former finery forge and ironworks originally dating back to the seventeenth century, although evidence suggests iron working took place in the vicinity as early as the fourteenth century. It is situated in the metropolitan borough of Barnsley, in South Yorkshire, England, on a loop of the River Don near the village of Wortley.

Contents

The Top Forge was always closely related to Wortley Low Forge, a short distance downstream. One of the forges was probably built about 1639 (possibly both of them) and certainly existed by 1641, from which time the ironmasters at Wortley were Thomas Cotton, and his son William Cotton (1627–1674); [3] the latter being the father of Thomas Cotton. Cannonballs are said to have been made here during the English Civil War. After that the finery forges usually belonged to a network of ironmasters led by members of the Spencer family of Cannon Hall, Cawthorne, but not between 1676 and 1690, when they were rented by other ironmasters. The two forges were always leased together with a blast furnace, Nether Bank Furnace, until the latter's closure probably about 1780, all of them being rented from the Wortley family.

In 1744, the forge was let to John Cockshutt (died 1774), who ran it with a partner. He also had a 'tinmill'. He was followed by his son, another John, who was succeeded by his brother James about 1800. James had worked at Merthyr Tydfil as a partner of William Crawshay in the Cyfarthfa Ironworks and when he returned to Wortley in 1791 after the dissolution of their partnership, he introduced puddling to Wortley, the tinmill probably being altered to roll blooms into bars of iron. After James' death in 1820, the works passed to relatives and then through various hands, coming into the hands of Thomas Andrews in 1849. On his death in 1871 he was followed by his son another Thomas Andrews, who died in 1907.

One of the buildings at Top Forge includes a date stone for 1713. [4] However, the current layout of the building dates from the 1850s when the forge was turned over to the production of shafts and axles mainly for use on railway wagons. Some of the earliest metallurgical experiments in the world were conducted at the site by the engineer and metallurgist Thomas Andrews. Railway axles of the highest quality were manufactured at the site in the nineteenth century and exported all over the world.

Production ceased around 1912, but parts of the site remained in use until 1929. One of the Top Forge hammers was run as a demonstration in 1933 or 1934. In 1955, the dream of C. R. Andrews (the son of the second Thomas) was fulfilled, the forge being reopened as an industrial museum by Sheffield Trades Historical Society (now South Yorkshire Industrial History Society). From the mid-1960s the Honorary Curator of the forge for over 40 years was Ken Hawley, who was the driving force behind a team of volunteer workers who preserved and restored the forge into its present condition – work that was recognised when he was appointed MBE in 1998. [5]

Of particular interest is that the site only ever used waterwheels to power the machinery. All three waterwheels have been restored to working order. Its buildings are used to house a variety of industrial machinery, including a Marshall twin-cylinder steam engine.

Heritage designations

The whole of the site is a Scheduled Monument [1] and the main forge is a Grade I listed building. [2] Top Forge Cottage, and two other cottages south of the forge, are listed separately at Grade II. [6] [7]

See also

Related Research Articles

Coalbrookdale Human settlement in England

Coalbrookdale is a village in the Ironbridge Gorge in Shropshire, England, containing a settlement of great significance in the history of iron ore smelting. It lies within the civil parish called the Gorge.

Wealden iron industry

The Wealden iron industry was located in the Weald of south-eastern England. It was formerly an important industry, producing a large proportion of the bar iron made in England in the 16th century and most British cannon until about 1770. Ironmaking in the Weald used ironstone from various clay beds, and was fuelled by charcoal made from trees in the heavily wooded landscape. The industry in the Weald declined when ironmaking began to be fuelled by coke made from coal, which does not occur accessibly in the area.

Ironworks Building or site where iron is smelted

An ironworks or iron works is an industrial plant where iron is smelted and where heavy iron and steel products are made. The term is both singular and plural, i.e. the singular of ironworks is ironworks.

Saugus Iron Works National Historic Site National Historic Site of the United States

Saugus Iron Works National Historic Site is a National Historic Site about 10 miles northeast of Downtown Boston in Saugus, Massachusetts. It is the site of the first integrated ironworks in North America, founded by John Winthrop the Younger and in operation between 1646 and approximately 1670. It includes the reconstructed blast furnace, forge, rolling mill, shear, slitter and a quarter-ton trip hammer.

Grosmont, North Yorkshire Village and civil parish in North Yorkshire, England

Grosmont is a village and civil parish situated in Eskdale in the North York Moors National Park, within the boundaries of the Scarborough district of the county of North Yorkshire, England.

Finery forge

A finery forge is a forge used to produce wrought iron from pig iron by decarburization in a process called "fining" which involved liquifying cast iron in a fining hearth and removing carbon from the molten cast iron through oxidation. Finery forges were used as early as the 3rd century BC in China. The finery forge process was replaced by the puddling process and the roller mill, both developed by Henry Cort in 1783–4, but not becoming widespread until after 1800.

Philip Foley was the youngest of the three surviving sons of the British ironmaster Thomas Foley. His father transferred all his ironworks in the Midlands to him in 1668 and 1669 for £60,000. He also settled an estate at Prestwood near Stourbridge on him on his marriage, to which Philip added the manor of Kinver.

Tannehill Ironworks United States state park and historic place

The Tannehill Ironworks is the central feature of Tannehill Ironworks Historical State Park near the unincorporated town of McCalla in Tuscaloosa County, Alabama. Listed on the National Register of Historic Places as Tannehill Furnace, it was a major supplier of iron for Confederate ordnance. Remains of the old furnaces are located 12 miles (19 km) south of Bessemer off Interstate 59/Interstate 20 near the southern end of the Appalachian Mountains. The 2,063-acre (835 ha) park includes: the John Wesley Hall Grist Mill; the May Plantation Cotton Gin House; and the Iron & Steel Museum of Alabama.

Derwentcote Steel Furnace Cementation furnace near Newcastle, England

Derwentcote Steel Furnace, Rowlands Gill, near Newcastle upon Tyne, England, built in 1720, is an example of an early cementation furnace which produced high-grade steel. A Grade I listed building, it is part of an industrial and mining site that has been protected as a scheduled monument.

Cornwall Iron Furnace Historic district in Pennsylvania, United States

Cornwall Iron Furnace is a designated National Historic Landmark that is administered by the Pennsylvania Historical and Museum Commission in Cornwall, Lebanon County, Pennsylvania in the United States. The furnace was a leading Pennsylvania iron producer from 1742 until it was shut down in 1883. The furnaces, support buildings and surrounding community have been preserved as a historical site and museum, providing a glimpse into Lebanon County's industrial past. The site is the only intact charcoal-burning iron blast furnace in its original plantation in the western hemisphere. Established by Peter Grubb in 1742, Cornwall Furnace was operated during the Revolution by his sons Curtis and Peter Jr. who were major arms providers to George Washington. Robert Coleman acquired Cornwall Furnace after the Revolution and became Pennsylvania's first millionaire. Ownership of the furnace and its surroundings was transferred to the Commonwealth of Pennsylvania in 1932.

Oregrounds iron

Oregrounds iron was a grade of iron that was regarded as the best grade available in 18th century England. The term was derived from the small Swedish city of Öregrund, the port from which the bar iron was shipped. It was produced using the Walloon process.

The Medway and its tributaries and sub-tributaries have been used for over 1,150 years as a source of power. There are over two hundred sites where the use of water power is known. These uses included corn milling, fulling, paper making, iron smelting, pumping water, making gunpowder, vegetable oil extraction, and electricity generation. Today, there is just one watermill working for trade. Those that remain have mostly been converted. Such conversions include a garage, dwellings, restaurants, museums and a wedding venue. Some watermills are mere derelict shells, lower walls or lesser remains. Of the majority, there is nothing to be seen. A large number of tributaries feed into the River Medway. The tributaries that powered watermills will be described in the order that they feed in. The mills are described in oder from source to mouth. Left bank and right bank are referred to as though the reader is facing downstream. This article covers the tributaries that feed in above Penshurst.

The Medway and its tributaries and sub-tributaries have been used for over 1,150 years as a source of power. There are over two hundred sites where the use of water power is known. These uses included corn milling, fulling, paper making, iron smelting, pumping water, making gunpowder, vegetable oil extraction, and electricity generation. Today, there is just one watermill working for trade. Those that remain have mostly been converted. Such conversions include a garage, dwellings, restaurants, museums and a wedding venue. Some watermills are mere derelict shells, lower walls or lesser remains. Of the majority, there is nothing to be seen. A large number of tributaries feed into the River Medway. The tributaries that powered watermills will be described in the order that they feed in. The mills are described in order from source to mouth. Left bank and right bank are referred to as though the reader is facing downstream. This article covers the watermills on the tributaries that feed in below Penshurst and above Yalding.

Ifield Water Mill Historic site in West Sussex , United Kingdom

Ifield Water Mill is a 19th-century weatherboarded watermill in the Ifield neighbourhood of Crawley, a town and borough in West Sussex, England. Built on the site of an earlier, smaller flour mill, which itself replaced an iron forge—one of many in the Crawley area—it fell into disuse in the 1930s. The local council, which acquired the land for housing development in the 1970s, leased the mill to local enthusiasts, who restored it to working order. The mill and an associated house are listed buildings, and there is also a cottage on the site.

Blaenavon Ironworks Former ironworks transformed into a museum

Blaenavon Ironworks is a former industrial site which is now a museum in Blaenavon, Wales. The ironworks was of crucial importance in the development of the ability to use cheap, low quality, high sulphur iron ores worldwide. It was the site of the experiments by Sidney Gilchrist Thomas and his cousin Percy Gilchrist that led to "the basic steel process" or "Gilchrist–Thomas process".

The firm of Harrison Ainslie & Co. was a British firm of ironmasters and iron ore merchants, selling high quality haematite from their mines on Lindal Moor to smelters in Glasgow, Scotland, South Wales and the Midlands. From a 21st-century perspective, they are more interesting as the last operators of charcoal-fired blast furnaces in Great Britain. Their furnaces were stone-built, water-powered, and much smaller than the coke-fired furnaces of the same era.

Parkend Ironworks Historic site in England, UK

Parkend Ironworks, also known as Parkend Furnace, in the village of Parkend, in the Forest of Dean, Gloucestershire, England, was a coke-fired furnace built in 1799. Most of the works were demolished between 1890 and 1908, but the engine house survived and is arguably the best preserved example of its kind to be found in the United Kingdom.

Barree Forge and Furnace United States historic place

Barree Forge and Furnace, now known as Greene Hills Methodist Camp, is a national historic district located at Porter Township in Huntingdon County, Pennsylvania. It consists of two contributing buildings, one contributing site, and one contributing structure associated with a former ironworks. They are the ironmaster's mansion, furnace stack, a barn, and the site of the Barree iron forge built about 1797. The ironmaster's mansion was built in the 1830s, and is a 2 1/2-story brick house painted white. The furnace stack dates to 1864, and is a 30-foot square, coursed limestone structure. It measures between 6 and 15 feet tall. The ironworks closed in the 1880s. The property was acquired in 1963, by the United Methodist Church for use as a church camp.

Museum of the Gorge, Ironbridge

The Museum of the Gorge, originally the Severn Warehouse, is one of the ten museums of the Ironbridge Gorge Museum Trust. It portrays the history of the Ironbridge Gorge and the surrounding area of Coalbrookdale, Shropshire, England.

Hunshelf is a civil parish in the metropolitan borough of Barnsley, South Yorkshire, England. The ward contains 23 listed buildings that are recorded in the National Heritage List for England. Of these, one is listed at Grade I, the highest of the three grades, and the others are at Grade II, the lowest grade. Apart from the hamlet of Green Moor, the parish is entirely rural. There are remnants of its industrial past in Wortley Top Forge, which is "one of only three water-powered hammer forges surviving in the United Kingdom". This is listed together with associated buildings. Most of the other listed buildings in the parish are farmhouses, farm buildings, and associated structures. The rest of the listed buildings consist of a guide post, a deer paddock, three bridges, and a set of stocks.

References

  1. 1 2 Historic England. "Wortley Top Forge (1018262)". National Heritage List for England . Retrieved 29 January 2019.
  2. 1 2 Historic England. "Wortley Top Forge (Grade I) (1315032)". National Heritage List for England. Retrieved 29 January 2019.
  3. Letter from the Corporation of Doncaster, 1674, enquiring into how much "iron had been delivered to their wharf during the preceding fourteen years by Mr Cotton of Watley Forge." [Doncaster Archives].
  4. Taylor, John (1879). The illustrated guide to Sheffield. Pawson and Brailsford. p.  320.
  5. Barley, Simon (19 August 2014). "Ken Hawley obituary". The Guardian. Retrieved 8 September 2014.
  6. Historic England. "Top Forge Cottage (Grade II) (1233963)". National Heritage List for England. Retrieved 29 January 2019.
  7. Historic England. "Two cottages adjoining and to south of Wortley Top Forge (Grade II) (1151114)". National Heritage List for England. Retrieved 29 January 2019.

Further reading