Write Once Read Forever

Last updated
W.O.R.F.
Write Once, Read Forever
WORF media illustrating many data types.pdf
Example of one possible WORF slide illustrating data, human readable microtext, indexing codes, a full-spectrum color image, and instructions for building a reader and decoding the data. WORF media is agnostic.
AbbreviationWORF
StatusPublished
OrganizationCreative Technology
CommitteeRichard Solomon, Eric Rosenthal, Jonathan Smith, Clark Johnson, Melitte Buchman
Domainarchival digital storage
Websitecreative-technology.net

Write Once Read Forever (WORF) is a data storage method which allows users to write data once and allows storage of the users data without ever being refreshed. This differs from common digital storage techniques such as drives that need to be re-written often to prevent loss or corruption of data. WORF was tested on the International Space Station in 2019.

Contents

Method

WORF uses a novel high-density patented [1] [2] [3] [4] [5] data storage mechanism based on silver halide, which after substantial testing has been determined to last for more than a century under conventional ambient environmental conditions. [6] [7] WORF digital data is stored as microscopic, metallic, interference-created standing waves (representing narrowband ‟colors” ) embedded in a modern, super-resolution, dye-free, photosensitive emulsion. Wavelengths encode multiple superimposed states allowing complex data permutations to be stored per data region. Permutations enable extremely high data density to be stored on WORF media. Multi-state data architecture within each domain also enhances data integrity, error-checking, and accelerates parallel writing and reading for the entire media module. [7] [8] [9] [10] Once data is written to WORF, energy is needed only for reading—no periodic refresh is necessary, and data is both immutable and truly permanent. Human readable text and images are embedded in the WORF module adjacent to the digital data. This text and imagery contain meta- information about the media's content, and instructions for decoding for future generations.

NASA Experiment

WORF payload was delivered and docked to the International Space Station (ISS) via SpaceX CRS-17 on May 9, 2019. NASA's ISS test will determine if WORF media can survive a hostile space environment during long-term space missions, such as Lunar, Mars missions, and beyond. The WORF media payload will stay on the ISS for up to one year. [6] [11]

Due to a previous NASA mission already named WORF, NASA renamed the experiment HELIOS (Hardened Extremely Long Life Information Optical Storage). The HELIOS mission returned to Earth and was deemed a success with the stored data showing no significant decay after six months of space conditions and solar radiation. WORF technology for the HELIOS experiment uses a proven archival media, redesigned, re-purposed and patented by CTech to store digital data for long periods, measured in decades and possibly centuries.[ citation needed ]

Related Research Articles

<span class="mw-page-title-main">International Space Station</span> Largest modular space station in low Earth orbit

The International Space Station, commonly referred to as the ISS, is the largest modular space station in low Earth orbit. The project involves five space agencies: the United States' NASA, Russia's Roscosmos, Japan's JAXA, Europe's ESA, and Canada's CSA. The ownership and use of the space station is established by intergovernmental treaties and agreements. The station serves as a microgravity and space environment research laboratory in which scientific research is conducted in astrobiology, astronomy, meteorology, physics, and other fields. The ISS is suited for testing the spacecraft systems and equipment required for possible future long-duration missions to the Moon and Mars.

<i>Kibō</i> (ISS module) Japanese ISS module, used on ISS press conferences

The Japanese Experiment Module (JEM), nicknamed Kibō, is a Japanese science module for the International Space Station (ISS) developed by JAXA. It is the largest single ISS module, and is attached to the Harmony module. The first two pieces of the module were launched on Space Shuttle missions STS-123 and STS-124. The third and final components were launched on STS-127.

<span class="mw-page-title-main">Multi-Purpose Logistics Module</span> Large pressurized container for cargo resupply of the International Space Station

A Multi-Purpose Logistics Module (MPLM) is a large pressurized container that was used on Space Shuttle missions to transfer cargo to and from the International Space Station (ISS). Two MPLMs made a dozen trips in the Shuttle cargo bay and initially berthed to the Unity module and later the Harmony module on the ISS. From there, supplies were offloaded, and finished experiments and waste were reloaded. The MPLM was then reberthed in the Shuttle for return to Earth. Three modules were built by the Italian Space Agency (ASI): Leonardo, Raffaello, and Donatello.

<span class="mw-page-title-main">STS-121</span> 2006 American crewed spaceflight to the ISS

STS-121 was a 2006 NASA Space Shuttle mission to the International Space Station (ISS) flown by Space ShuttleDiscovery. The main purposes of the mission were to test new safety and repair techniques introduced following the Columbia disaster of February 2003 as well as to deliver supplies, equipment and German European Space Agency (ESA) astronaut Thomas Reiter to the ISS.

<i>Destiny</i> (ISS module) Primary US ISS module

The Destiny module, also known as the U.S. Lab, is the primary operating facility for U.S. research payloads aboard the International Space Station (ISS). It was berthed to the Unity module and activated over a period of five days in February, 2001. Destiny is NASA's first permanent operating orbital research station since Skylab was vacated in February 1974.

<span class="mw-page-title-main">Dextre</span> Robotic Arm

Dextre, also known as the Special Purpose Dexterous Manipulator (SPDM), is a two-armed robot, or telemanipulator, which is part of the Mobile Servicing System on the International Space Station (ISS), and does repairs that would otherwise require astronauts to do spacewalks. It was launched on March 11, 2008, on the mission STS-123.

<span class="mw-page-title-main">Helios (spacecraft)</span> Pair of sun-orbiting probes launched in 1974-76 by the American and West German space agencies

Helios-A and Helios-B are a pair of probes that were launched into heliocentric orbit to study solar processes. As a joint venture between German Aerospace Center (DLR) and NASA, the probes were launched from Cape Canaveral Air Force Station, Florida, on December 10, 1974, and January 15, 1976, respectively.

<span class="mw-page-title-main">Douglas H. Wheelock</span> American engineer and astronaut (born 1960)

Douglas Harry "Wheels" Wheelock is an American engineer and astronaut. He has flown in space twice, logging 178 days on the Space Shuttle, International Space Station, and Russian Soyuz. On July 12, 2011, Wheelock announced that he would be returning to active duty with the United States Army in support of Operation Enduring Freedom. He is currently working with NASA to test the Orion spacecraft at the Glenn Research Center in Plum Brook, Ohio.

<span class="mw-page-title-main">Holographic data storage</span> Data storage technology

Holographic data storage is a potential technology in the area of high-capacity data storage. While magnetic and optical data storage devices rely on individual bits being stored as distinct magnetic or optical changes on the surface of the recording medium, holographic data storage records information throughout the volume of the medium and is capable of recording multiple images in the same area utilizing light at different angles.

<span class="mw-page-title-main">Ultra Density Optical</span> Optical disc designed for the storage of digital video

Ultra Density Optical (UDO) is an optical disc format designed for high-density storage of high-definition video and data.

<span class="mw-page-title-main">STS-131</span> 2010 American crewed spaceflight to the ISS

STS-131 was a NASA Space Shuttle mission to the International Space Station (ISS). Space ShuttleDiscovery launched on April 5, 2010, at 6:21 am from LC-39A, and landed at 9:08 am on April 20, 2010, on runway 33 at the Kennedy Space Center's Shuttle Landing Facility. The mission marked the longest flight for Space Shuttle Discovery.

<span class="mw-page-title-main">ExPRESS Logistics Carrier</span> Module on the International Space Station

An EXpedite the PRocessing of Experiments to Space Station (ExPRESS) Logistics Carrier (ELC) is an unpressurized attached payload platform for the International Space Station (ISS) that provides mechanical mounting surfaces, electrical power, and command and data handling services for Orbital Replacement Units (ORUs) as well as science experiments on the ISS. The ELCs were developed primarily at the Goddard Space Flight Center in Greenbelt, Maryland, with support from JSC, KSC, and MSFC. ELC was formerly called "Express Pallet" and is the unpressurized counterpart to the pressurized ExPRESS Rack. An ELC provides scientists with a platform and infrastructure to deploy experiments in the vacuum of space without requiring a separate dedicated Earth-orbiting satellite.

<span class="mw-page-title-main">Nikon NASA F4</span> Digital camera

The Nikon NASA F4 Electronic Still Camera is one of the first and rarest fully digital cameras with development started in 1987. While Nikon delivered a modified Nikon F4 body, most of the electronics for the digital camera and housings were designed and manufactured by NASA at the Johnson Space Center and other suppliers. It was first flown in September 1991 on board the Space Shuttle Discovery, mission STS-48. Later the cameras were flown on several other Shuttle missions including STS-44, 45, 42, 49, 53, 56 and 61.

<span class="mw-page-title-main">US Orbital Segment</span> US components of the International Space Station

The US Orbital Segment (USOS) is the name given to the components of the International Space Station (ISS) constructed and operated by the United States National Aeronautics and Space Administration (NASA), European Space Agency (ESA), Canadian Space Agency (CSA) and Japan Aerospace Exploration Agency (JAXA). The segment consists of eleven pressurized components and various external elements, all of which were delivered by the Space Shuttle.

<span class="mw-page-title-main">Window Observational Research Facility</span> Experiment rack facility manufactured by the Brazilian Space Agency

The Window Observational Research Facility (WORF) is an experiment rack facility manufactured by the Brazilian Space Agency, which remotely operated payloads and crew members can perform Earth and space science research, including hand held photography, at the U.S. Laboratory Science Window on the International Space Station. WORF is based on an International Standard Payload Rack (ISPR) and utilizes avionics and hardware adapted from the EXPRESS Rack program. The rack provides a payload volume equivalent to 0.8 m3 (28 cu ft), and will be able to support up to three payloads simultaneously, depending on available resources and space available at the window. The WORF will also provide access and equipment for crew Earth observations, such as crew restraints, camera/camcorder brackets, and condensation prevention. WORF payloads include those focusing on geology, agriculture, ranching, environmental and coastal changes, and education.

<span class="mw-page-title-main">NASA Launch Services Program</span> NASA program

The NASA Launch Services Program (LSP) is responsible for procurement of launch services for NASA uncrewed missions and oversight of launch integration and launch preparation activity, providing added quality and mission assurance to meet program objectives. LSP operates under the NASA Space Operations Mission Directorate (SOMD).

Worf is a fictional character from the Star Trek franchise.

<span class="mw-page-title-main">SpaceX CRS-4</span> 2014 American resupply spaceflight to the ISS

SpaceX CRS-4, also known as SpX-4, was a Commercial Resupply Service mission to the International Space Station (ISS), contracted to NASA, which was launched on 21 September 2014 and arrived at the space station on 23 September 2014. It was the sixth flight for SpaceX's uncrewed Dragon cargo spacecraft, and the fourth SpaceX operational mission contracted to NASA under a Commercial Resupply Services contract. The mission brought equipment and supplies to the space station, including the first 3D printer to be tested in space, a device to measure wind speed on Earth, and small satellites to be launched from the station. It also brought 20 mice for long-term research aboard the ISS.

<span class="mw-page-title-main">BioSentinel</span> US experimental astrobiology research satellite

BioSentinel is a lowcost CubeSat spacecraft on a astrobiology mission that will use budding yeast to detect, measure, and compare the impact of deep space radiation on DNA repair over long time beyond low Earth orbit.

Crew Dragon <i>Endeavour</i> SpaceX Crew Dragon spacecraft

Crew Dragon Endeavour is a Crew Dragon spacecraft manufactured and operated by SpaceX and used by NASA's Commercial Crew Program. As of 2022 it has successfully completed three crewed missions to the International Space Station (ISS). It was first launched into orbit atop a Falcon 9 rocket on 30 May 2020 and successfully docked to the International Space Station (ISS) as part of the Crew Dragon Demo-2 mission. This was the first crewed flight test of a Dragon capsule, carrying Doug Hurley and Bob Behnken on first crewed orbital spaceflight from the United States since STS-135 in July 2011 and the first crewed orbital spaceflight by a private company. On 2 August 2020 it returned to Earth. The spacecraft was named by Hurley and Behnken after the Space ShuttleEndeavour, aboard which they first flew into space during the STS-127 and STS-123 missions, respectively. The name Endeavour is also shared by the command module of Apollo 15. The spacecraft's second mission, Crew-2, ended 8 November 2021 after having spent almost 200 days in orbit. Crew Dragon Endeavour set the record for the longest spaceflight by a U.S. crew vehicle previously set by her sibling Crew Dragon Resilience on 2 May 2021. Collectively, Endeavour has spent 280 days in orbit and is the crewed space capsule with most time spent in orbit so far.

References

  1. US 6985294,"Full spectrum color projector" for generating narrowband wavelengths.
  2. US 7437000,"Full spectrum color detecting pixel camera" for accurate color detection.
  3. US 7521680,"Electromagnetic Spectral-Based Imaging Devices And Methods" for accurate color detection of WORF data regions
  4. US 8891344,"Wave-based optical data storage" specifying in detail WORF methods and procedures.
  5. US 9330706,"Write Once Read Forever Archival Data Storage"
  6. 1 2 "NASA TechPort". techport.nasa.gov. Retrieved 2019-05-11.
  7. 1 2 "Write Once, Read Forever (WORF): Low-energy storage in perpetuity of high-density, multi-state data". Archiving Conference. 2014: 118–122. June 2014.
  8. "Write Once, Read Forever (WORF)—Proof-Of-Concept Demonstrated for Archival Data Storage Using Interference Spectra". Archiving Conference. 2015: 92–97. May 2015.
  9. Solomon, Richard J.; Buchman, Melitte; Rosenthal, Eric; Smith, Jonathan M.; Johnson, Clark; Butterfield, William; Carlin, Donald (2016). "Test Data Reader for Write Once, Read Forever (WORF) Interference Spectra Archival Media". Archiving Conference. 2016: 61–65. doi:10.2352/issn.2168-3204.2016.1.0.61.
  10. Solomon, Richard J.; Buchman, Melitte; Rosenthal, Eric; Smith, Jonathan M.; Johnson, Clark (2019). "Toward a "Digital Noah's Archive" (DNA)". Archiving Conference. 2019 (1): 66–71. doi:10.2352/issn.2168-3204.2019.1.0.15. S2CID   194404237.
  11. "WORF/NASA Press Release".