The Bootie Folding Cycle, or 'Bootie', is a rare folding bicycle produced in West Yorkshire UK from 1965 to 1973. [1]
The Bootie Folding Cycle, or 'Bootie', is a rare folding bicycle produced in West Yorkshire UK from 1965 to 1973. [1]
The Bootie Folding Cycle was designed by Thomas Kitchin and made by F. T. Kitchin of Vickersdale Works, an old industrial estate in Grove Street, Stanningley, Pudsey.
F.T. Kitchin were general engineers who were in business for over 100 years. They have been described as relatively small, true 'jobbing' engineers who were very quirky and willing to make, or 'invent', whatever wasn't generally available, but never big enough to develop their products in the way a larger firm would. [2]
The Bootie was sold directly via advertising in the cycle press. In the December 1966/January 1967 issue of Cycletouring Magazine it was priced at £25.10.0 (inc. tax), delivered. [2]
It was primarily designed for ‘last mile’ purposes, but the advertising also appealed to caravanners, boat owners, flat dwellers and fishermen. The slogan ‘As a dinghy is to a boat, so is the Bootie to a car’ was used to promote the Bootie. [2]
The ‘Bootie’ name was chosen because the bike was designed to be small enough to store in the boot (trunk in American English) of a car. [3]
Strictly speaking, the Bootie was not really a folding bike. More accurately, it was a very small, rigid-framed bike with folding handlebars and seat post. It was therefore a revival of a concept pioneered by the French ‘Le Petit Bi’ in the late 1930s. The Daewoo Shuttle is a more recent example of the type. [2]
The Bootie featured a then-unique way to fold the handlebars and seat out of the way. This comprised a solid steel, two-part hinge fitted midway on the steerer and seat tubes.
Each hinge was secured with a hand nut which, when loosened, allowed the upper part to be swung over the side of the frame. In the case of the steerer tube, loosening another hand nut allowed the handlebars to be rotated 90 degrees to fit snugly against the side of the bike. [2]
Only the very earliest examples had both a hinged seat tube and handlebar stem. Within a year or two of introduction the hinged seat tube was replaced by a conventional seat tube with a long seat post that could be slid down or removed altogether. The lower end of the seat tube was open, and to the rear of the bottom bracket, to allow the seat post to slide all the way down.
With the change to a conventional seat tube the only part of the Bootie 'Folding' Cycle that actually folded was the steerer tube (i.e. the handlebars). [1]
The Bootie Folding Cycle came well equipped, with mudguards, a built-in luggage rack, front and rear lamp brackets and sidestand. The crankset is a steel, cottered mass market unit manufactured by Williams, and the handlebars and stem are conventional chrome plated steel. A black double-sprung mattress type saddle was fitted to the 500 mm long L-shaped seatpost. Booties were shod with Dunlop or Michelin ETRTO size 203 - 62, balloon-type tyres. [2]
The wheelbase was 76 cm (compared to around a metre for conventional bicycles), with an overall length of 120 cm with the foldable front rack extended. The Bootie weighed around 17 kg. [2]
The Bootie was produced for in two ‘generations’: the first from 1965 to 1968, the second from then until the end of production. [2]
The frame of the first generation Bootie was made of pairs of half inch steel tubes, with the flattened tube ends bolted to aluminium head, saddle and bottom bracket castings. The chainstays were of flat steel strip. [2]
The first generation bikes had wire wheels. Braking was by unique, Kitchin-made stirrup brakes designed with extra leverage to give more braking power than was otherwise available with the tiny wheels. A Sturmey Archer ‘AW’ three speed gear was fitted. [2]
The second generation Booties had a different frame and wheels. The frame was mostly of tubular steel without lugs, but the chainstays were still made of flat steel strip. [2]
The wheels were of single-piece cast alloy, the front being equipped with sealed ball races, possibly a first for the industry. An alloy GB T91 Sprite caliper brake was employed at the front, while the rear brake was of the internal expanding type, integral with the three speed gear in the Sturmey Archer ‘AB’ hub. It appears as though the drive side flange of the hub was removed for fitting in the wheel. [2]
A bicycle, also called a pedal cycle, bike, push-bike or cycle, is a human-powered or motor-assisted, pedal-driven, single-track vehicle, with two wheels attached to a frame, one behind the other. A bicycle rider is called a cyclist, or bicyclist.
A recumbent bicycle is a bicycle that places the rider in a laid-back reclining position. Some recumbent riders may choose this type of design for ergonomic reasons: the rider's weight is distributed comfortably over a larger area, supported by back and buttocks. On a traditional upright bicycle, the body weight rests entirely on a small portion of the sitting bones, the feet, and the hands.
A tricycle, sometimes abbreviated to trike, is a human-powered three-wheeled vehicle.
A bicycle frame is the main component of a bicycle, onto which wheels and other components are fitted. The modern and most common frame design for an upright bicycle is based on the safety bicycle, and consists of two triangles: a main triangle and a paired rear triangle. This is known as the diamond frame. Frames are required to be strong, stiff and light, which they do by combining different materials and shapes.
A hub gear, internal-gear hub, internally geared hub or just gear hub is a gear ratio changing system commonly used on bicycles that is implemented with planetary or epicyclic gears. The gears and lubricants are sealed within the shell of the hub gear, in contrast with derailleur gears where the gears and mechanism are exposed to the elements. Changing the gear ratio was traditionally accomplished by a shift lever connected to the hub with a Bowden cable, and twist-grip style shifters have become common.
A touring bicycle is a bicycle designed or modified to handle bicycle touring. To make the bikes sufficiently robust, comfortable and capable of carrying heavy loads, special features may include a long wheelbase, frame materials that favor flexibility over rigidity, heavy duty wheels, and multiple mounting points.
The Birdy is a folding bicycle designed by Riese und Müller in Germany and produced by Pacific Cycles in Taiwan. As of 2010 over 100,000 had been sold. Three distinct models have been marketed, in addition to some specialist variations, with the third (Mk3) introduced in July 2015.
A shaft-driven bicycle is a bicycle that uses a drive shaft instead of a chain to transmit power from the pedals to the wheel. Shaft drives were introduced in the 1880s, but were mostly supplanted by chain-driven bicycles due to the gear ranges possible with sprockets and derailleurs. Around the 2000s, due to advancements in internal gear technology, a small number of modern shaft-driven bicycles have been introduced.
A kickstand is a device on a bicycle or motorcycle that allows the bike to be kept upright without leaning against another object or the aid of a person. A kickstand is usually a piece of metal that flips down from the frame and makes contact with the ground. It is generally located in the middle of the bike or towards the rear. Some touring bicycles have two: one at the rear, and a second in the front.
A roadster bicycle is a type of utility bicycle once common worldwide, and still common in Asia, Africa, Latin America, and some parts of Europe. During the past few decades, traditionally styled roadster bicycles have regained popularity in the Western world, particularly as a lifestyle or fashion statement in an urban environment.
Strida is a portable belt-driven folding bicycle with a distinctive A-shaped collapsible frame, designed by British engineer and designer Mark Sanders. The first model, Strida 1, was released in 1987 and the latest, Strida 5.2, in 2009.
Bicycle suspension is the system, or systems, used to suspend the rider and bicycle in order to insulate them from the roughness of the terrain. Bicycle suspension is used primarily on mountain bikes, but is also common on hybrid bicycles.
The Bickerton, also called the Bickerton Portable, was a portable aluminium folding bicycle designed by Harry Bickerton and manufactured in the UK and Australia between 1971 and 1989. Bickerton, an accomplished engineer, suffered a three year driving ban in 1970 following a car crash, and invented the bike for himself, to be carried onto public transport or stored in the trunk of a car as small as an Austin Mini.
The Swift Folder is a folding bicycle, designed by Peter Reich of Design Mobility Inc. of Brooklyn, New York, in collaboration with Jan VanderTuin of the Center for Appropriate Transport in Eugene, Oregon.
A bicycle handlebar is the steering control for bicycles. It is the equivalent of a tiller for vehicles and vessels, as it is most often directly mechanically linked to a pivoting front wheel via a stem which in turn attaches it to the fork. Besides steering, handlebars also often support a portion of the rider's weight, depending on their riding position, and provide a convenient mounting place for brake levers, shift levers, cyclocomputers, bells, etc.
A folding bicycle is a bicycle designed to fold into a compact form, facilitating transport and storage. When folded, the bikes can be more easily carried into buildings, on public transportation, and more easily stored in compact living quarters or aboard a car, boat or plane.
Mountain bike trials, also known as observed trials, is a discipline of mountain biking in which the rider attempts to pass through an obstacle course without setting foot to ground. Derived from motorcycle trials, it originated in Catalonia, Spain as trialsín and is said to have been invented by Pere Pi, the father of Ot Pi, a world champion motorcycle trials rider. Pi's father had wanted his son to learn motorcycle trials by practicing on an ordinary bicycle.
The Raleigh Bomber was a bicycle aimed at the boys/youth market which first appeared in 1981. The Bomber had wide balloon tyres, a low slung frame and a sprung saddle with wide "cowhorn" style handlebars in the general style of a "cruiser" bicycle.