Phytosanitary irradiation

Last updated

Phytosanitary irradiation is a treatment that uses ionizing radiation on commodities, such as fruits and vegetables to inactivate pests, such as insects. [1] This method is used for international food trade as a means to prevent spread of non-native organisms. [1] It is used as an alternative to conventional techniques, which includes heat treatment, cold treatment, pesticide sprays, high pressure treatment, cleaning, waxing or chemical fumigation. [2] It is often used on spices, grains, and non-food items. [3] [1] It inhibits the species reproduction cycle by destroying nuclear material primarily, whereas other methods are measured by species mortality. [3] Each country has different effective approved dosages, although most follow guidelines established by the IPPC which has issued guidelines referred to as the International Standards for Phytosanitary Measures (ISPM). The most commonly used dose is 400 Gy (as a broad spectrum, generic treatment) based on USDA-APHIS guidelines. [1]

Contents

History

The foundations of ionizing radiation was first discovered in 1895 by Wilhelm Röntgen through discovery of x-rays. [4] In the following year, Henri Becquerel discovered natural radioactivity, another form of ionizing radiation. [4] Soon after the discovery of ionizing radiation, therapeutic use and bactericide treatments were proposed. [4] Research in the early 1900s demonstrated that X-rays can destroy and hinder the development of the egg, larval and adult stages of cigar beetles. [1] Application of irradiation as a disinfestation procedure for fruit flies was suggested in 1930, [1] however, it was only in 1986 that irradiation up to 1kGy was approved by the FDA as a method to disinfest arthropods in food. [1] Before approval in the United States, Hawaii petitioned for permission of irradiation on papayas in 1972. [1] The FDA finally approved the use of 1 kGy for use on arthropods in fruits and vegetables in 1986. [1] In that same year, the first case of commercial phytosanitary irradiation occurred with Puerto Rican mangoes imported to the Florida market. [1] Three years later, Hawaii received approval for irradiation of papayas at 150 Gy for shipment to mainland U.S. [1] In 2004, Australia and New Zealand opened their markets to phytosanitary irradiation. [3] In 2007, India sent a shipment of mangoes to the U.S., followed by fruit from Thailand, Vietnam, and Mexico. Australia continues to broaden their irradiated exports with new markets in Indonesia, Malaysia and Vietnam. [3]

Mode of action

Ionizing radiation such as gamma rays, electron beam, X-rays can be used to provide phytosanitary treatment. The direct effect of these high energy photons and electrons, as well as the free radicals they produce result in sufficient damage to large organic molecules such as DNA and RNA resulting in sterilization, morbidity or mortality of the target pests. [5] The sources of irradiation for gamma rays are Cobalt 60 and Cesium 137. X-rays are produced by accelerating electrons at metal sources such as gold and electron beams are produced via an electron accelerator. [6]

Commercial use

Commercial Irradiator used for sterilizing spices, fruits, vegetables to inactivate pathogenic microbes using sources such as Cobalt 60 and Cesium 137 Commercial Irradiator (36801710985).jpg
Commercial Irradiator used for sterilizing spices, fruits, vegetables to inactivate pathogenic microbes using sources such as Cobalt 60 and Cesium 137

Phytosanitary irradiation is used to control the spread of non-native species from one geographical area to another. Global trade allows for the procurement of seasonal produce all year round from all over the world, however, there are risks involved due to the spread of invasive species. Irradiation is highly effective as a phytosanitary measure and as a non-thermal treatment, also helps maintain quality of fresh produce. [1] [7] The most commonly used generic dose is 400 Gy to cover most pests of concern except pupae and adults of the order Lepidoptera, which includes moths and butterflies. [1] Generic doses are the dose level used for a specific group of pests and/or products. Irradiation treatment levels depend upon the pests of concern.

Advantages

A key advantage of phytosanitary irradiation is that treatment doses are tolerated by many commodities without adverse effects on their sensory and physicochemical profiles. [5] Conventional methods of phytosanitation, such as hot water dips and fumigation with methyl bromide, can affect sensory quality and damage the fruit. [8] [5] [3] Compared to the doses used for microorganisms, the doses for phytosanitation are considerable lower and adverse effects are minimal. [3] In some climacteric fruit, irradiation delays ripening which extends shelf life and allows the fruit to maintain quality for the long distance shipment between harvest and consumption. [3] Since 2000, phytosanitary irradiation has seen a 10% increase every year. [1] This is in part due to increased restrictions on conventionally used chemicals and the effectiveness in a wide variety of produce. [1] In certain fruits such as rambutan, irradiation is the only method capable of treatment without extensive deterioration as seen from commercial methods. [3] In addition, temperature based phytosanitation methods and chemical fumigation are not entirely reliable. Import inspections still find live pests in commodities treated with these methods. [3]

Disadvantages

Some fruit, such as certain varieties of citrus and avocados have a low tolerance to irradiation and show symptoms of phytotoxicity at low irradiation levels. Sensitivity to irradiation depends on many factors, such as irradiation dose, commodity, and storage conditions. [9] In addition, organic food industries prohibit the use of irradiation on organic products. Lack of communication and education regarding phytosanitary irradiation can hamper its use. Since this treatment causes reproductive sterilization, pests may be present during commodity inspection. [3] The presence of live pests conflict with current inspection standards and there is no clear marker of treatment efficacy. [9] Some other challenges in relation to the commercialization and acceptance of this technology can be attributed to lack of sufficient facilities, cost and inconvenience of treatment, lack of approved treatment for certain pests and concerns about its technology by the key decision makers (traders, shippers, packers). [5] Lack of harmonization of regulations across countries is also a factor that limits its use. [6] Although, phytosanitary irradiation has seen an increase in use globally, lack of consumer acceptance in the European Union, Japan, South Korea, and Taiwan limits its use in countries for which these are major export markets. [3]

See also

Related Research Articles

<span class="mw-page-title-main">Food irradiation</span> Sterilization of food with ionizing radiations for enhanced preservation and longer shelflife

Food irradiation is the process of exposing food and food packaging to ionizing radiation, such as from gamma rays, x-rays, or electron beams. Food irradiation improves food safety and extends product shelf life (preservation) by effectively destroying organisms responsible for spoilage and foodborne illness, inhibits sprouting or ripening, and is a means of controlling insects and invasive pests.

<span class="mw-page-title-main">Radiation therapy</span> Therapy using ionizing radiation, usually to treat cancer

Radiation therapy or radiotherapy is a treatment using ionizing radiation, generally provided as part of cancer therapy to either kill or control the growth of malignant cells. It is normally delivered by a linear particle accelerator. Radiation therapy may be curative in a number of types of cancer if they are localized to one area of the body, and have not spread to other parts. It may also be used as part of adjuvant therapy, to prevent tumor recurrence after surgery to remove a primary malignant tumor. Radiation therapy is synergistic with chemotherapy, and has been used before, during, and after chemotherapy in susceptible cancers. The subspecialty of oncology concerned with radiotherapy is called radiation oncology. A physician who practices in this subspecialty is a radiation oncologist.

<span class="mw-page-title-main">X-ray</span> Form of short-wavelength electromagnetic radiation

X-ray is a high-energy electromagnetic radiation. In many languages, it is referred to as Röntgen radiation, after the German scientist Wilhelm Conrad Röntgen, who discovered it in 1895 and named it X-radiation to signify an unknown type of radiation.

A radionuclide (radioactive nuclide, radioisotope or radioactive isotope) is a nuclide that has excess numbers of either neutrons or protons, giving it excess nuclear energy, and making it unstable. This excess energy can be used in one of three ways: emitted from the nucleus as gamma radiation; transferred to one of its electrons to release it as a conversion electron; or used to create and emit a new particle (alpha particle or beta particle) from the nucleus. During those processes, the radionuclide is said to undergo radioactive decay. These emissions are considered ionizing radiation because they are energetic enough to liberate an electron from another atom. The radioactive decay can produce a stable nuclide or will sometimes produce a new unstable radionuclide which may undergo further decay. Radioactive decay is a random process at the level of single atoms: it is impossible to predict when one particular atom will decay. However, for a collection of atoms of a single nuclide the decay rate, and thus the half-life (t1/2) for that collection, can be calculated from their measured decay constants. The range of the half-lives of radioactive atoms has no known limits and spans a time range of over 55 orders of magnitude.

<span class="mw-page-title-main">Beta particle</span> Ionizing radiation

A beta particle, also called beta ray or beta radiation, is a high-energy, high-speed electron or positron emitted by the radioactive decay of an atomic nucleus during the process of beta decay. There are two forms of beta decay, β− decay and β+ decay, which produce electrons and positrons respectively.

<span class="mw-page-title-main">Nuclear technology</span> Technology that involves the reactions of atomic nuclei

Nuclear technology is technology that involves the nuclear reactions of atomic nuclei. Among the notable nuclear technologies are nuclear reactors, nuclear medicine and nuclear weapons. It is also used, among other things, in smoke detectors and gun sights.

Ionizing radiation (US) (or ionising radiation [UK]), including nuclear radiation, consists of subatomic particles or electromagnetic waves that have sufficient energy to ionize atoms or molecules by detaching electrons from them. Some particles can travel up to 99% of the speed of light, and the electromagnetic waves are on the high-energy portion of the electromagnetic spectrum.

The gray is the unit of ionizing radiation dose in the International System of Units (SI), defined as the absorption of one joule of radiation energy per kilogram of matter.

Radiation dosimetry in the fields of health physics and radiation protection is the measurement, calculation and assessment of the ionizing radiation dose absorbed by an object, usually the human body. This applies both internally, due to ingested or inhaled radioactive substances, or externally due to irradiation by sources of radiation.

<span class="mw-page-title-main">Sterilization (microbiology)</span> Process that eliminates all biological agents on an object or in a volume

Sterilization refers to any process that removes, kills, or deactivates all forms of life and other biological agents present in or on a specific surface, object, or fluid. Sterilization can be achieved through various means, including heat, chemicals, irradiation, high pressure, and filtration. Sterilization is distinct from disinfection, sanitization, and pasteurization, in that those methods reduce rather than eliminate all forms of life and biological agents present. After sterilization, an object is referred to as being sterile or aseptic.

Absorbed dose is a dose quantity which is the measure of the energy deposited in matter by ionizing radiation per unit mass. Absorbed dose is used in the calculation of dose uptake in living tissue in both radiation protection, and radiology. It is also used to directly compare the effect of radiation on inanimate matter such as in radiation hardening.

Irradiation is the process by which an object is exposed to radiation. An irradiator is a device used to expose an object to radiation, notably gamma radiation, for a variety of purposes. Irradiators may be used for sterilizing medical and pharmaceutical supplies, preserving foodstuffs, alteration of gemstone colors, studying radiation effects, eradicating insects through sterile male release programs, or calibrating thermoluminescent dosimeters (TLDs).

Radioresistance is the level of ionizing radiation that organisms are able to withstand.

<span class="mw-page-title-main">Radiation burn</span> Damage to skin or biological tissue from radiation exposure

A radiation burn is a damage to the skin or other biological tissue and organs as an effect of radiation. The radiation types of greatest concern are thermal radiation, radio frequency energy, ultraviolet light and ionizing radiation.

Radiation chemistry is a subdivision of nuclear chemistry which studies the chemical effects of ionizing radiation on matter. This is quite different from radiochemistry, as no radioactivity needs to be present in the material which is being chemically changed by the radiation. An example is the conversion of water into hydrogen gas and hydrogen peroxide.

Particle therapy is a form of external beam radiotherapy using beams of energetic neutrons, protons, or other heavier positive ions for cancer treatment. The most common type of particle therapy as of August 2021 is proton therapy.

Intraoperative electron radiation therapy is the application of electron radiation directly to the residual tumor or tumor bed during cancer surgery. Electron beams are useful for intraoperative radiation treatment because, depending on the electron energy, the dose falls off rapidly behind the target site, therefore sparing underlying healthy tissue.

Electron-beam processing or electron irradiation (EBI) is a process that involves using electrons, usually of high energy, to treat an object for a variety of purposes. This may take place under elevated temperatures and nitrogen atmosphere. Possible uses for electron irradiation include sterilization, alteration of gemstone colors, and cross-linking of polymers.

<span class="mw-page-title-main">Gamma ray</span> Energetic electromagnetic radiation arising from radioactive decay of atomic nuclei

A gamma ray, also known as gamma radiation (symbol
γ
), is a penetrating form of electromagnetic radiation arising from the radioactive decay of atomic nuclei. It consists of the shortest wavelength electromagnetic waves, typically shorter than those of X-rays. With frequencies above 30 exahertz (3×1019 Hz), each gamma ray imparts the highest photon energy of any form of electromagnetic radiation. Paul Villard, a French chemist and physicist, discovered gamma radiation in 1900 while studying radiation emitted by radium. In 1903, Ernest Rutherford named this radiation gamma rays based on their relatively strong penetration of matter; in 1900 he had already named two less penetrating types of decay radiation (discovered by Henri Becquerel) alpha rays and beta rays in ascending order of penetrating power.

<span class="mw-page-title-main">Philippine Nuclear Research Institute</span> Agency of the Philippine government

The Philippine Nuclear Research Institute (PNRI) is a government agency under the Department of Science and Technology mandated to undertake research and development activities in the peaceful uses of nuclear energy, institute regulations on the said uses, and carry out the enforcement of said regulations to protect the health and safety of radiation workers and the general public.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Hallman, Guy J.; Blackburn, Carl M. (2016). "Phytosanitary irradiation". Foods. 5 (4): 8. doi: 10.3390/foods5010008 . PMC   5224571 . PMID   28231103.
  2. ↑ Hallman, Guy J. (2012). "Generic phytosanitary irradiation treatments". Radiation Physics and Chemistry. 81 (7): 861–866. Bibcode:2012RaPC...81..861H. doi:10.1016/j.radphyschem.2012.03.010.
  3. 1 2 3 4 5 6 7 8 9 10 11 Hallman, Guy J.; Loaharanu, Paisan (2016). "Phytosanitary irradiation – Development and application". Radiation Physics and Chemistry. 129: 39–45. Bibcode:2016RaPC..129...39H. doi:10.1016/j.radphyschem.2016.08.003.
  4. 1 2 3 Ehlermann, Dieter A.E. (2016). "The early history of food irradiation". Radiation Physics and Chemistry. 129: 10–12. Bibcode:2016RaPC..129...10E. doi:10.1016/j.radphyschem.2016.07.024.
  5. 1 2 3 4 Nutrition, Center for Food Safety and Applied (2015). "Irradiated Food & Packaging - Packaging for Foods Treated with Ionizing Radiation". wayback.archive-it.org. Archived from the original on 2017-07-22. Retrieved 2018-04-18.
  6. 1 2 "CFR - Code of Federal Regulations Title 21". www.accessdata.fda.gov. 2010. Retrieved 2018-04-18.
  7. ↑ Roberts, Peter B. (2016). "Food irradiation: Standards, regulations and world-wide trade". Radiation Physics and Chemistry. 129: 30–34. Bibcode:2016RaPC..129...30R. doi:10.1016/j.radphyschem.2016.06.005.
  8. ↑ United States Department of Agriculture (2016). "Treatment Manual" (PDF).
  9. 1 2 "eCFR — Code of Federal Regulations". www.ecfr.gov. 2018. Retrieved 2018-04-18.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.